Sodium Cholesteryl Sulfate Research Articles

Cholesterol sulfate-mediated ion-pairing facilitates the self-nanoassembly of hydrophilic cationic mitoxantrone

HypothesisHydrophilic cationic drugs such as mitoxantrone hydrochloride (MTO) pose a significant delivery challenge to the development of nanodrug systems. Herein, we report the use of a hydrophobic ion-pairing strategy to enhance the nano-assembly of MTO. ExperimentsWe employed biocompatible sodium cholesteryl sulfate (SCS) as a modification module to form stable ion pairs with MTO, which balanced the intermolecular forces and facilitated nano-assembly. PEGylated MTO-SCS nanoassemblies (pMS NAs) were prepared via nanoprecipitation. We systematically evaluated the effect of the ratio of the drug module (MTO) to the modification module (SCS) on the nanoassemblies. FindingsThe increased lipophilicity of MTO-SCS ion pair could significantly improve the encapsulation efficiency (∼97 %) and cellular uptake efficiency of MTO. The pMS NAs showed prolonged blood circulation, maintained the same level of tumor antiproliferative activity, and exhibited reduced toxicity compared with the free MTO solution. It is noteworthy that the stability, cellular uptake, cytotoxicity, and in vivo pharmacokinetic behavior of the pMS NAs increased in proportion to the molar ratio of SCS to MTO. This study presents a self-assembly strategy mediated by ion pairing to overcome the challenges commonly associated with the poor assembly ability of hydrophilic cationic drugs.

Long and very long lamellar phases in model stratum corneum lipid membranes

Membrane models of the stratum corneum (SC) lipid barrier, either healthy or affected by recessive X-linked ichthyosis, constructed from ceramide [Cer; nonhydroxyacyl sphingosine N-tetracosanoyl-d-erythro-sphingosine (CerNS24) alone or with omega-O-acylceramide N-(32-linoleyloxy)dotriacontanoyl-d-erythro-sphingosine (CerEOS)], FFAs(C16-24), cholesterol (Chol), and sodium cholesteryl sulfate (CholS) were investigated. X-ray diffraction (XRD) revealed a previously unreported polymorphism of the membranes. In the absence of CerEOS, the membranes formed a short lamellar phase (SLP; the repeat distance d = 5.3 nm), a medium lamellar phase (MLP; d = 10.6 nm), or very long lamellar phases (VLLP; d = 15.9 and 21.2 nm). An increased CholS-to-Chol ratio modulated the membrane polymorphism, although the CholS phase separated at ≥ 7 weight% (of total lipids). The presence of CerEOS led to the stable long lamellar phase (LLP) with d = 12.2 nm and prevented VLLP formation. Our XRD results agree well with recently published cryo-electron microscopy data for vitreous skin sections, while also revealing new structures. Thus, lamellar phases with long repeat distances (MLP and VLLP) may be formed in the absence of omega-O-acylceramide, whereas these ultralong Cer species likely stabilize the final SC lipid architecture of LLP by riveting the adjacent lipid layers.

Colistin-entrapped liposomes driven by the electrostatic interaction: Mechanism of drug loading and in vivo characterization

The potential in vivo application of liposome for polycationic colistin has been hindered by the poor entrapment efficiency (EE) due to their phospholipid membrane permeability. The objective of this study is to investigate the loading mechanism and validity of applying electrostatic attraction for the colistin entrapment and delivery in liposomes. Anionic lipids with various structures were used for colistin entrapment, and the properties of resulting liposomes (i.e. zeta-potential, EE and release rate) were highly dependent on the structure of anionic lipids. Based on consideration of intermolecular interactions, the retention of electrostatically entrapped colistin is essentially determined by the balance of interfacial hydrophobic attraction and electrostatic repulsion. The liposomal colistin showed the reduced bacterial killing rate, but did not compromise the in vitro antibacterial activity. Specially, the PEGylated liposomal colistin of sodium cholesteryl sulfate (Chol-SO4−) showed the best drug retention, resulting in the significantly increased maximum-tolerated dose, prolonged blood circulation and decreased colistin distribution in kidney after intravenous administration in mice. These results highlight the potential utility of electrostatically entrapped liposome for polycationic colistin delivery.

Electrostatically entrapped colistin liposomes for the treatment of Pseudomonas aeruginosa infection

The potential use of liposomes for the pulmonary delivery of colistin has been hindered by their phospholipid membrane permeability resulting in a very low entrapment of colistin in the liposomes. To increase the entrapment capacity of colistin in liposomes, the anionic lipid sodium cholesteryl sulfate (Chol-SO4−) was used to enhance the electrostatic attraction between colistin and the lipid membrane. The resulting colistin-entrapped liposomes of Chol-SO4− (CCL) showed significantly greater entrapment efficiency in comparison with liposomes without Chol-SO4−. A time-kill kinetics study showed that colistin could redistribute from the liposomes into a new bacterial cell membrane to exert bactericidal activity. After intratracheal instillation, the CCL exhibited prolonged colistin retention in the lung with less colistin being transferred to the bloodstream and kidney, and the improved biodistribution further resulted in the enhanced therapeutic efficacy in a murine pulmonary Pseudomonas aeruginosa infection model compared with the colistin solution. These results highlight the suitability of applying an electrostatic attraction to entrap colistin in liposomes for pulmonary delivery by increasing colistin retention in the lung, while reducing the systemic exposure.

Neutron Scattering Studies of the Effects of Formulating Amphotericin B with Cholesteryl Sulfate on the Drug’s Interactions with Phospholipid and Phospholipid–Sterol Membranes

Langmuir surface pressure, small-angle neutron scattering (SANS), and neutron reflectivity (NR) studies have been performed to determine how formulation of the antifungal drug amphotericin B (AmB), with sodium cholesteryl sulfate (SCS)-as in Amphotec-affects its interactions with ergosterol-containing (model fungal cell) and cholesterol-containing (model mammalian cell) membranes. The effects of mixing AmB in 1:1 molar ratio with cholesteryl sulfate (yielding AmB-SCS micelles) are compared against those of free AmB, using monolayers and bilayers formed from palmitoyloleoylphosphatidylcholine (POPC) in the absence and presence of 30 mol % ergosterol or cholesterol, in all cases employing a 1:0.05 molar ratio of lipid:AmB. Analyses of the (bilayer) SANS and (monolayer) NR data indicate that the equilibrium changes in membrane structure induced in sterol-free and sterol-containing membranes are the same for free AmB and AmB-SCS. Stopped-flow SANS experiments, however, reveal that the structural changes to vesicle membranes occur far more rapidly following exposure to AmB-SCS vs free drug, with the kinetics of these changes varying with membrane composition. With POPC vesicles, the structural changes induced by AmB-SCS become apparent only after several minutes, and equilibrium is reached after ∼30 min. The corresponding onset of changes in POPC-ergosterol and POPC-cholesterol vesicles, however, occurs within ∼5 s, with equilibrium reached after 10 and 120 s, respectively. The rate of insertion of AmB into POPC-sterol membranes is thus increased through formulation as AmB-SCS. Moreover, the differences in monolayer surface pressure and SANS structure-change equilibration times suggest significant rearrangement of AmB within these membranes following insertion. The reduced times to equilibrium for the POPC-ergosterol vs POPC-cholesterol systems are consistent with the known differences in affinity of AmB for these two sterols, and the reduced time to equilibrium for AmB-SCS interaction with POPC-ergosterol membranes vs that for free AmB is consistent with the reduced host toxicity of Amphotec.

Nanotechnology for therapy and imaging of liver diseases

Nanotechnology has been considered for the improved delivery of various therapeutic agents, including drugs and genes. Indeed, liposomes and nanoparticles equipped with homing devices for the targeting of receptors over-expressed on the hepatic tissue have improved the treatment of various liver diseases. In this review, various nanotechnology approaches employed for the treatment/imaging of liver disease, either in preclinical or in clinic are discussed.

Inhibitory Effects of Cholesterol Derivatives on DNA Polymerase and Topoisomerase Activities, and Human Cancer Cell Growth

This paper describes the inhibitory activities of cholesterol derivatives such as cholesterol, sodium cholesteryl sulfate, cholesteryl-5alpha, 6alpha-epoxide, cholesteryl chloride, cholesteryl bromide, and cholesteryl hemisuccinate (compounds 1-6, respectively) against DNA polymerase (pol), DNA topoisomerase (topo), and human cancer cell growth. Among the compounds tested, compounds 2 and 6 revealed themselves to be potent inhibitors of animal pols, and the IC50 values for pols were 0.84-11.6 and 2.9-148 microM, respectively. Compounds 2, 3 and 6 inhibited the activity of human topo II, with IC50 values of 5.0, 12.5 and 120 microM, respectively. Compounds 2, 3 and 6 also suppressed human cancer cell (promyelocytic leukemia cell line, HL-60) growth, and LD50 values were 8.8, 20.2 and 72.3 microM, respectively, suggesting that cell growth inhibition had the same tendency as the inhibition of topos rather than pols. Compounds 2 and 6 arrested the cells in S and G2/M phases, compound 3 arrested the cells in the G2/M phase, and these compounds also increased sub-G1 phase in the cell cycle. These results suggested that the effect of cell cycle arrest might be effective on both pols and topos activities. From these findings, the action mode of cholesterol derivatives as anti-cancer compounds is discussed.

Phase Behavior of Palmitic Acid/Cholesterol/Cholesterol Sulfate Mixtures and Properties of the Derived Liposomes

The phase behavior of mixtures formed by palmitic acid (PA), cholesterol (Chol), and sodium cholesteryl sulfate (Schol) has been characterized by differential scanning calorimetry and infrared and 2H NMR spectroscopy. It is reported that it is possible to form, with PA/sterol mixtures, fluid lamellar phases where the sterol content is very high (a sterol mole fraction of 0.7). As a consequence of the rigidifying ability of the sterols, the PA acyl chains are very ordered. The stability of these self-assembled bilayers is found to be pH-dependent. This property can be controlled by the Chol/Schol molar ratio, and it is proposed that this parameter modulates the balance between the intermolecular interactions between the constituting species. A phase-composition diagram summarizing the behavior of these mixtures as a function of pH, at room temperature, is presented. It is also shown that it is possible to produce large unilamellar vesicles (LUVs) from these mixtures, using standard extrusion techniques. The resulting LUVs display a very limited passive release of the entrapped material. In addition, these LUVs constitute a versatile vector for pH-triggered release.

Amphotericin B colloidal dispersion: an improved antifungal therapy

Amphotericin B colloidal dispersion (ABCD) is a near 1:1 discoidal complex of amphotericin B (AMB) and sodium cholesteryl sulfate (SCS) arranged as a bilayer of SCS interspersed with AMB via noncovalent interactions. The complex is stable in blood and plasma with minimal dissociation. In vitro and in vivo studies show that ABCD is as effective and four to five times safer than conventional AMB (CAB) for fungal infection. Compared with CAB treatment, ABCD demonstrates reduced peak plasma levels, prolonged residence time, and lowered AMB levels in most tissues including kidney, the major target of toxicity for CAB. In 572 patients with systemic fungal infections secondary to severe underlying disease, ABCD doses ≤6 mg/kg/day were well tolerated, even in those who failed to tolerate or respond to CAB. Mild-to-moderate, dose-dependent, infusion-related adverse events typically seen with CAB were also observed with ABCD, with no sign of renal or hepatic toxicity. Complete or partial recovery was seen in 57.3%. Therefore, ABCD should be considered as an alternative treatment of systemic fungal infections.

Complexes of Amphotericin B and Cholesteryl Sulfate

AbstractTo improve the clinical utility of amphotericin B, we have developed a novel formulation of amphotericin B, Amphocil® (also known as Amphotericin B Colloidal Dispersion, or ABCD). Amphocil is a uniform disc-shaped complex of amphotericin B and sodium cholesteryl sulfate in a molar ratio of 1:1. The complex has a mean hydrodynamic diameter of approximately 115 nm and is thermodynamically stable. In an extensive series of pharmacodynamic, pharmacokinetic and toxicology studies, Amphocil was found to be less toxic than conventional amphotericin B (Fungizone®), providing a four- to five-fold improvement in safety, while remaining effective in treating a variety of fungal infections. Plasma pharmacokinetics and tissue disposition of amphotericin B differ in several respects after administration of Amphocil and conventional amphotericin B, due to a rapid uptake of Amphocil by liver. Animals receiving Amphocil demonstrated reduced peak levels in plasma, prolonged residence time and lowered levels of amph...

Novel antifungal drug delivery: stable amphotericin B-cholesteryl sulfate discs

To improve the clinical utility of a potent fungicidal agent, amphotericin B (AB), we developed a novel drug dosage form based on the specific interaction of AB with sterols. AB and sodium cholesteryl sulfate at an equimolar ratio form a thermodynamically stable discoidal complex of uniform size. The therapeutic index of the drug is significantly improved (4–6-fold) as a direct result of the unique physical properties of this colloidal system. This drug/lipid complex does not hemolyze red blood cells, exhibits only low binding to plasma lipoproteins in vitro, alters plasma kinetics and tissue distribution compared to a deoxycholate/AB micellar formulation, and is effective in eradicating fungal infections in vivo.

ChemInform Abstract: THE CRYSTAL STRUCTURE OF SODIUM CHOLESTERYL SULFATE DIHYDRATE

Chemischer InformationsdienstVolume 9, Issue 14 Physical Organic Chemistry ChemInform Abstract: THE CRYSTAL STRUCTURE OF SODIUM CHOLESTERYL SULFATE DIHYDRATE I. PASCHER, I. PASCHERSearch for more papers by this authorS. SUNDELL, S. SUNDELLSearch for more papers by this author I. PASCHER, I. PASCHERSearch for more papers by this authorS. SUNDELL, S. SUNDELLSearch for more papers by this author First published: April 4, 1978 https://doi.org/10.1002/chin.197814065Read the full textAboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinkedInRedditWechat No abstract is available for this article. Volume9, Issue14April 4, 1978 RelatedInformation

The Crystal Structure of Sodium Cholesteryl Sulfate Dihydrate.

The Crystal Structure of Sodium Cholesteryl Sulfate Dihydrate.

Autoxidation of cholesterol in aqueous colloidal dispersions with different detergents.

Metal-free autoxidation of cholesterol (I) was examined at 70°for twenty hours in an aqueous colloidal dispersion which was made by sodium cholesteryl sulfate as a solubilizer and entirely freed of organic solvent. The products isolated and/or identified were cholest-5-ene-3β, 7α-diol (II), cholest-5-ene-3β, 7β-diol (III) (16.7% as the diols), 5α-cholestane-3β, 5, 6β-triol (IV ; 8.3%), 3β-hydroxycholest-5-en-7-one (V ; 14.5%), cholesta-3, 5-dien-7-one (VI ; 5.2%), and the unidentified compounds A (3.0%), B (1.4%), and C (0.7%) as shown in Table I. Autoxidation of I was also observed in the colloidal systems dispersed by four kinds of solubilizer, sodium stearate, sodium taurocholate, sodium cholesteryl hemisuccinate, and the sulfate as shown in Fig. 1. Effects of the detergent in higher concentration were noticeable in the hemisuccinate dispersions.