Smart Garbage Monitoring System Research Articles

IoT Based Smart Garbage Monitoring System and Domestic Care

The IoT-Based Smart Garbage Monitoring and Domestic Care System leverages Arduino and various sensors to provide an intelligent solution for waste management and domestic care. The system utilizes ultrasonic sensors to measure the fill levels of bins, detecting when they are near capacity. An IR sensor identifies the presence of waste in real time, and a moisture sensor classifies the waste as either wet or dry. This classification enables the system to segregate waste using a servo motor for proper disposal. Additionally, a gas sensor monitors harmful gases like methane, which may indicate hazardous conditions. The ultrasonic sensor measures the bin's level by emitting ultrasonic waves and measuring the time taken for the waves to bounce back after hitting the surface of the waste. By utilizing this data, the system can determine the fill level of the dustbin. Key Words: IoT-Based Waste Management, Smart Garbage Monitoring, Domestic Care System, Arduino Microcontroller, Ultrasonic Sensor, IR Sensor, Moisture Sensor, Wet and Dry Waste Segregation, Servo Motor, Gas Sensor, Methane Detection, Real-Time Monitoring, Smart Dustbin, Hazardous Gas Monitoring, Intelligent Waste Disposal, Ultrasonic Wave Measurement, IoT Applications, Sustainable Waste Management, Environmental Monitoring

IoT-based smart garbage monitoring system and advanced disciplinary approach

The rapid urbanization and population growth in cities have led to an unprecedented increase in municipal waste generation. Efficient management of this waste is crucial to maintaining a clean and healthy environment. Traditional waste management methods often fall short in addressing the dynamic nature of waste generation patterns. This project presents a Garbage Monitoring System (GMS) that utilizes advanced sensor technologies and data analytics to revolutionize waste collection processes in urban areas. The system integrates different sensors, devices for communication, and software applications to furnish real-time monitoring and data analysis for waste management. The system not only enhances the operational efficiency of waste management but also promotes environmental sustainability. By optimizing collection schedules, reducing waste overflow, and reducing environmental negative impact, the system represents a significant step towards building smart and eco-friendly cities. The approach is to help in an innovative way while collecting garbage and monitoring systems in an effective way.

Internet of things-based garbage monitoring system integrated with Telegram

<p>This paper presents the development of smart garbage monitoring system usin g internet of things (IoT) to keep the environment clean thus reducing cleaners’ burden. The present era is characterized by smart cities, where precision and organization are the norm. This initiative was launched because population is progressing rapidly, increasing more garbage hence esclating cleaner’s frequency of dustbin checking daily whether the dustbin is full or not which mean more labour costs. The main purpose of this researc h is to develop a systematic garbage monitoring system which can help cleaners schedule their work in monitoring and picking up garbage from dustbins. It used node microcontroller (NodeMCU) ESP8266 Wi - Fi module as the main controller to control ultrasonic and rain input sensors and provide notifications via Telegram. A limit switch is used to detect whether the lid is open or closed. When the lid is closed, the ultrasonic sensor is activated and measures the garbage distance depending on the amount. If an overrun of the maximum amount is detected, the red - light emitting diode (LED) will turn on that connects to the Wi - Fi module, which sends notification to the cleaners. As a result, the IoT based garbage monitoring system was fully functioned and accomplish ed its objectives.</p>

Digital solutions for garbage waste management for supporting Malawi cleaning council

Digital solutions have emerged as powerful tools for addressing the challenges associated with garbage and waste management. This study proposes the implementation of a smart garbage monitoring system to support the Malawi Cleaning Council in their efforts to efficiently manage waste in Malawi. The system utilizes sensor technology integrated into garbage bins to monitor fill levels and transmit data to a central platform. This data is then analyzed to optimize waste collection routes and schedules, ensuring timely and cost-effective waste pickups. The smart garbage monitoring system also enables the Malawi Cleaning Council to proactively address overflowing bins and illegal dumping by receiving real-time alerts and location information. By leveraging digital technology, the system enhances the council's ability to allocate resources effectively, reduce operational costs, and improve overall waste management efficiency. The findings of this study highlight the potential of digital solutions for transforming garbage waste management and contributing to a cleaner and healthier environment in Malawi.

IOT Based Waste Management System Using Node MCU

This project presents a novel approach to provide illustrative model of the Waste Management systems using IoT Waste Management System. Garbage segregation and monitoring is an essential issue for most of the cities in India. The current garbage monitoring and management system are highly ineffective contributing to high transportation and collection costs. Due to poor monitoring and collection, garbage bins are seen overflowing in certain areas which can lead to long-term problems such as bad odor and harmful diseases.To overcome these problems “NodeMcu based smart garbage monitoring system” can be introduced as an effective solution. This smart garbage monitoring system employs NodeMcu as its main microcontroller. It uses the ultrasonic sensor as a level detector to detect the amount of garbage in the bin. And also moisture sensor is used to segregate dry and wet waste. Software Tools:  Arduino IDE  C-Language Key Words: Waste Mangement segregation, Node MCU,Segregation.

IoT-based Smart Garbage Monitoring

Smart Garbage Monitoring System using Arduino and Blynk is an IoT-based project that is integrated with cloud computing service. It was developed specifically to help janitors and residential college representative committee in a public university in Malaysia in monitoring the level of garbage in the dustbin through Blynk application, which makes it easy to empty the dustbin and optimize the garbage collection time. This project uses ultrasonic sensor to measure the level of garbage in the dustbin and the data can be viewed through mobile application, Blynk. It will also notify users through email once the garbage bin capacity is full. Other than notification function, Smart Garbage Monitoring System also consists of automatic open and close lid, track dustbin location and humidity level. The objectives of this project are to design the IoT system that detects the level of the garbage displayed in Blynk and an LCD attached to the dustbin and to validate the user acceptance test for the system. The development of Smart Garbage Monitoring System used the System Development Life Cycle (SDLC) by implementing the agile model as the methodology. A User Acceptance Testing was conducted with 20 respondents including students from the student representatives’ body and janitors. This testing aimed to determine the acceptance of the system by conducting an evaluation. The results of the User Acceptance Test shows that most of the participants agreed and verified that the system works for them and a suitable solution for their problems. Therefore, based on the features and functionalities offered by the Smart Garbage Monitoring System, it could be concluded that this system is beneficial to all the users, especially the janitors and students of the residential college.

Internet of things (IoT) based smart garbage monitoring system

<p>Garbage waste monitoring, collection and management is one of the primary concerns of the present era due to its detrimental effects on environment. The traditional way of manually monitoring and collecting the garbage is a cumbersome process as it requires considerable human effort and time leading to higher cost. In this paper, an IoT based garbage monitoring system using Thingspeak, an open IoT platform is presented. The system consists of an Arduino microcontroller, an ultrasonic sensor, a load cell and a Wi-Fi module. The Arduino microcontroller receives data from the ultrasonic sensor and load cell. The depth of the garbage in the bin is measured using ultrasonic sensor and the weight of the bin with garbage is measured from the load cell. The LCD screen is used to display the data. The Wi-Fi module transmits the above data to the internet. An open IoT platform Thingspeak is used to monitor the garbage system. With this system, the administrator can monitor and schedule garbage collection more efficiently. A prototype has been developed and tested. It has been found to work satisfactorily. The details are presented in this paper.</p>

Design and Implementation of a Smart Garbage Monitoring System (GMS) using Internet of Things (IOT)

Design and Implementation of a Smart Garbage Monitoring System (GMS) using Internet of Things (IOT)

IoT Based Smart Garbage Monitoring System with Geo-Tag

Cities around the globe are getting smarter. Some of the private and public organization dedicated for cleanliness of their cities round the clock. People are getting more active in doing all the things possible to clean their surroundings. Many initiations were taken by the government to increase cleanliness. Municipal access networks to support all types of city management services requiring a data connection .our system is designed to monitor the Garbage bins with geo location tag which will notify the status of bin to authorities to execute required action. Sensor on top of the garbage bin which will detect level of garbage in according to the Specification of the bin. When the garbage is reached to the maximum level, a notification will be sent to the concern authorities via SMS with a mapped location to take necessary action.

IoT: smart garbage monitoring using android and real time database

Every single day, garbage is always produced and sometimes, due to the unbalance between high volume produced and the garbage volume transported to the landfill; it then leads to the buildup. To prevent any negative impact on environment, a system is needed to support the waste management process. Smart Garbage Monitoring System consists of two parts: portable garbage can and monitoring application using android smartphone. The use of ultrasonic sensor, GPS and GSM Module on the garbage can aims to provide the data on the garbage and send it to the real time database, in which the data will be processed by the monitoring application on smartphone to determine the time of garbage transport purposely to prevent any buildup. The system doesn't need a server to process, because the entire process of will be run by android application on a smartphone. Test results showed the capability of the system in monitoring the garbage can with the minimum distance between the wastes by three meters. The information on the height level of garbage can be synchronized in real time to smartphone, with an average delay on the EDGE network of 4.57 seconds, HSPA+ of 4.52 seconds and LTE of 3.85 seconds.

Multipurpose Street Smart Garbage bin based on Iot

The government of India aims at “Swachh Bharat Mission” and for that we need smart city with smart streets enabled with smart garbage monitoring system. We see garbage bins around us placed at public places overflowing with due to increase in waste and results into unhygienic conditions for people and leads to deadly diseases. Thus to improve this situation, we proposed this project. In our proposed system, there are multiple smart garbage trash bins on a microcontroller board platform (Arduino Board) located throughout any city or the campus or hospital. The Arduino Board is interfaced with GSM modem and ultrasonic sensor. Once the level of threshold is being crossed, then ultrasonic sensors will trigger the GSM module which in turn continuously alert the authorised person by sending SMS reminder after until the dustbin is cleaned. Beside this, we will also create the central system that will keep showing us the current status of garbage on mobile web browser with html page by wi-fi. With the help of this, we will create shortest path for garbage collection vehicles using Dijkstra Algorithm. This is real time waste management by using smart trash bins that can be accessed anytime anywhere by the concerned person. Keywords: IoT; Smart city; Smart Garbage Bins; Arduino; Ultrasonic Sensors; GSM; Real time Analytics; Route Optimization

Smart Garbage Monitoring System for Waste Management

Piles of rubbish are one of the major problems faced by most people in Malaysia, especially those who live in flats, as the number of bins is limited and shared among all residents. It may cause pollutions, which may lead to sanitary issues and diseases. This project presents the development of a smart garbage monitoring system in order to measure waste level in the garbage bin in real-time and to alert the municipality, in particular cases, via SMS. The proposed system is consisted by the ultrasonic sensor to measure the waste level, the GSM module to send the SMS, and an Arduino Uno which controls the system operation. It supposes to generate and send the warning messages to the municipality via SMS when the waste bin is full or almost full, so the garbage can be collected immediately. Furthermore, it is expected to contribute to improving the efficiency of the solid waste disposal management.