Small Size Research Articles

Effects of α-olefin sulfonate (AOS) on Tubifex tubifex: toxicodynamic-toxicokinetic inferences from the general unified threshold (GUTS) model, biomarker responses and molecular docking predictions.

We investigated the potential ecological risks and harm to aquatic organisms posed by anionic surfactants such as α-olefin sulfonate (AOS), which are commonly found in industrial and consumer products, including detergents. This study assessed acute (96-h) and subchronic (14-day) responses using antioxidant activity, protein levels, and histopathological changes in Tubifex tubifex exposed to different AOS concentrations (10% of the LC50, 20% of the LC50, and a control). Molecular docking was used to investigate the potential interactions between the key stress biomarker enzymes (superoxide dismutase, catalase, and cytochrome c oxidase) of Tubifex tubifex. Acute AOS exposure showed a concentration-dependent decrease in survival, and the general unified threshold (GUTS) model revealed that survivorship is linked to individual response patterns rather than random (stochastic) fluctuations. The GUTS model also revealed dose-dependent toxicity patterns in Tubifex tubifex exposed to α-olefin sulfonate (AOS), with adaptive mechanisms at lower concentrations but significant increases in mortality beyond a certain threshold, emphasizing the role of the AOS concentration in shaping its toxicological impact. Exposure to AOS disrupted antioxidant activity, inducing oxidative stress, with GST and GPx showing positive associations with surfactant concentration and increased lipid peroxidation (elevated MDA levels); moreover, AOS exposure decreased protein concentration, signifying disturbances in vital cellular processes. Histopathological examinations revealed various tissue-level alterations, including cellular vacuolation, cytoplasmic swelling, inflammation, necrosis, and apoptosis. Molecular docking analysis demonstrated interactions between AOS and enzymes (-catalase, superoxide dismutase, and cytochrome c oxidase) in Tubifex tubifex, including hydrophobic and hydrogen bond interactions, with the potential to disrupt enzyme structures and activities, leading to cellular process disruptions, oxidative stress, and tissue damage. According to the species sensitivity distribution (SSD), the difference in toxicity between Tilapia melanopleura (higher sensitivity) and Daphnia magna (low sensitivity) to AOS suggests distinct toxicokinetic and toxicodynamic mechanisms attributable to more complex physiology in Tilapia and efficient detoxification in Daphnia due to its smaller size.

Effectiveness of bedside staplers in bariatric robotic procedures.

Few studies have evaluated the use of laparoscopic staplers in robotic procedures (bedside stapling, BS). This study aims to evaluate the effectiveness of BS compared with robotic staplers (RS) in bariatric robotic procedures. Patients who underwent robotic sleeve gastrectomy or gastric bypass elective procedures between 1/1/2021 and 12/31/2021 were extracted from PINC AI™ Healthcare Data. The following clinical outcomes were compared: blood transfusion, bleeding, anastomotic leak, intensive care unit (ICU) visit, and 30-day readmission, operating room (OR) time, inpatient costs, and length of stay. We evaluated baseline balance in BS and RS and bivariate association between covariates and outcomes using Chi-square or Fisher exact test and t-test or ANOVA. Multivariable general linear mixed models (GLMMs) with respective gamma or binomial distribution and log-link function were used to obtain adjusted outcomes variations between BS and RS. Total of 7268 discharges were included with 1603 (22.1%) BS and 5665 (77.9%) RS cases. RS cases consisted of a higher number of patients who were Hispanic (17.0% vs. 9.4%), had Medicaid (26.9% vs. 19.4%) and underwent sleeve gastrectomy (68.4% vs. 53.5%). Higher proportions of RS cases were done by providers in Northeast region (35.5% vs. 24.3%), smaller size (< 500 beds; 71.1% vs. 52.3%), and teaching hospitals (59.4% vs. 39%). The adjusted outcomes variations demonstrated that patients that had RS were significantly more likely to have blood transfusions, ICU stays, increased ORT (19min) and costs ($1273). Sensitivity analysis showed similar results, except no significant differences in blood transfusion rates in both groups. Bedside staplers significantly reduce healthcare resource utilization with equivalent effectiveness and fewer ICU stays compared to robotic staplers.

Morphology of &lt;i&gt;Caragana arborescens&lt;/i&gt; Lam., introduced in the Volgograd Oblast and the status of its cover herbaceous plant communities

The study of the shrub status in the South-East of the European Russia is relevant due to the need to maintain the necessary material for protective afforestation. The study of their cover plant communities provides valuable information about the ecological aspects of the introduction and successful adaptation of shrubs in a place of mass planting. The aim of the study was to assess the condition of Caragana arborescens, imported from Eastern Siberia and planted in the arid territories of the Volgograd Oblast, as well as the ecological characteristics of its cover herbaceous plant communities. In the study area we selected two groups of plants, those growing on ordinary soil and on soil with a high content of salts, zinc, and a low content of manganese. In the latter case, C. arborescens had a relatively smaller size, a rarer crown, a reduced ability to generate shoots and resistance to diseases and pests. C. arborescens are sensitive to the anthropogenic stress, but within the analyzed territory this is not accompanied by progressive succession of the ecosystem. Under the crown of C. arborescens at various sites and sites, we found in various phenophases from 8–10 to 24 species of higher sapiens with a predominance of one- and two-year-old forms. Nine species have consistently claimed the role of dominant and subdominant of plant communities, most often representatives of the Asteraceae and Mareaceae families. The discovered communities showed clear signs of anthropogenic impact, but without the development of progressive ecosystem succession.

Identifying Potential Critical Angel Shark Areas in Türkiye, Eastern Mediterranean Based on New Records of Squatina spp. Identified through Fisher Engagement

This study presents new records of three Critically Endangered angel shark species (Family: Squatinidae) occurring in the Eastern Mediterranean—Smoothback Angelshark S. oculata Bonaye, 1840, Sawback Angelshark S. aculeata Cuvier, 1829, and Angelshark S. squatina (Linnaeus, 1758). The supporting data serves to highlight three potential Critical Angel Shark Areas (CASAs) in Türkiye: Fethiye Bay, Çanakkale Strait (i.e., Dardanelles), and Antalya Bay. These data also demonstrate that female S. oculata may mature at a smaller size than prior published estimates of length at first maturity. This new dataset provides details of 23 S. squatina specimens, 52 S. oculata specimens, and 5 S. aculeata specimens, totalling 80 recent angel shark specimens found in Turkish waters mostly sent to us from small-scale fishers who had incidentally caught angel sharks. Also presented are four capture-induced parturition events in Turkish waters onboard fishing vessels, thus providing details on internal yolk sacs, reproductive habitats, and indications of spawning season. Our dataset presented here spans from 2018 to 2023 and suggests that mature adults of S. squatina and S. oculata still occur in Turkish waters, in Fethiye Bay and Çanakkale, respectively. Due to elevated chances of fishers encountering Critically Endangered angel sharks in Türkiye, we suggest that fishers are trained in handling and safe-release methods, to ensure reduced incidents of capture-induced parturition, and improved post-release survival. This study demonstrates that bottom set nets set by small-scale fishers pose less risk to mortality for angel sharks as they are almost always encountered alive after a usual 12 h soak time, suggesting that bottom trawling in critical habitats should be better regulated (or phased out) to help improve national angel shark conservation initiatives.

A novel approach for nanobubble generation toward biomedical applications

The stability of free-standing nanobubbles is a long-standing controversial problem due to the Laplace pressure catastrophe at the nanoscale. In most industrial circumstances, a large quantity of surfactants is required as stabilisers or emulsifiers to generate stable bubbles or foams. However, when surfactants exceed a certain level, they can adversely affect living organisms and pose environmental risks. Towards biomedical use, we investigated nanobubble generation through a mini-extruder in amino acid solutions. Herein, we considered glycine (having two acid dissociation constants, i.e. pKa values) and lysine (having three pKa values) as two model amino acids, conducting experiments with various concentrations (0.1 M, 0.5 M and 1 M), along with different pH values (above, equal to, and below the isoelectric points of each amino acids; 5.97 for glycine and 9.74 for lysine). Our results showcased the proof of concept that amino acids can stabilise nanobubbles in bulk for a few days. We achieved remarkable products of nanobubbles via nanopores by extrusion, with reproducible size distribution and stability. We also compared the extrusion protocol with the commonly used ultrasound method. It turned out that extrusion generated samples with smaller sizes and higher concentrations than sonication. This study provides a reliable protocol for generating small-scale nanobubbles for biomedical use, showing great potential in drug delivery for medical treatment.

Pressure and atomic size effects of IV cation on mechanical and electronic properties of Zn-IV-N2 (IV[dbnd]Si, Ge and Sn): First principles calculation

Zn-IV-N2 compounds, incorporating Si, Ge, and Sn, have emerged as pivotal materials for their mechanical and electronic properties, influencing optoelectronic devices and photovoltaic applications. Employing density functional theory (DFT), we comprehensively investigate the structural, elastic, mechanical, and electronic characteristics of ZnIVN2 (IVSi, Ge, Sn) under ambient and pressure conditions up to 20 GPa. Our findings suggest that a larger atomic size of the group IV cation can be more easily compressed than a smaller size. The mechanical stability criteria and the phonon dispersion show mechanical and dynamic stability in both ambient pressure and under high pressure up to 20 GPa. The ZnSiN2 and ZnGeN2 exhibit linear increments in bulk modulus (B), shear modulus (G), and Young's modulus (E) under pressure, while ZnSnN2 experiences a decrease in G and E. Notably, the energy gap of ZnSiN2, ZnGeN2, and ZnSnN2 (4.62 eV indirect, 2.82 eV, 1.16 eV, respectively) increases with pressure due to higher N s orbital energy, approaching the UV region. In the valence band, a hybridization of N p and Si/Ge/Sn p orbitals is observed, offering opportunities to tailor the band gap for optimal applications in optoelectronic devices. Preferentially adjusting group-IV elements over group-II elements is recommended for optimizing band gap modulation. The correlation between larger atomic size and decreased band gap energy highlights the potential to fine-tune material properties through controlled variations in group-IV elements.

Innovative pressure sensing with amorphous silicon nanostructures: Exploring applications in sports training supervision

This study introduces an innovative approach to pressure sensing in sports training using amorphous silicon nanostructure-based sensors. These sensors demonstrated high sensitivity (0.75 Ω/kPa) and a broad pressure detection range (1–100 kPa), making them ideal for capturing the nuances of athletic movements. Their compact size (5 mm×5 mm) and superior durability (over 5000 cycles with minimal performance variation) allowed for seamless integration into athletic shoes and attire. The sensors effectively captured pressure patterns in running, such as heel strikes peaking at 300 kPa, and cycling, revealing a 200 kPa increase in the perineal region during posture shifts. Comparative analysis highlighted the advantages of amorphous silicon nanostructure sensors over existing technologies, including higher sensitivity, wider pressure range, smaller size, and better durability. The integration of these sensors provided invaluable data for optimizing training regimes and preventing injuries. The study also delved into the physical and chemical characterization of the nanostructures, confirming their uniform size distribution, surface morphology, and amorphous nature, which contributed to their exceptional sensing performance. The findings underscore the immense potential of amorphous silicon nanostructure sensors in revolutionizing athletic performance analysis and injury prevention, offering a significant upgrade over current technologies in terms of accuracy, adaptability, and user-friendliness. This research paves the way for more sophisticated, precise, and athlete-centric pressure sensing solutions, transforming the landscape of sports technology and biomechanical assessment.

Review of Carbon Nanotube Field Effect Transistor for Nanoscale Regime

Background: The need for high performance, small size, low delay, low power consumption, and long battery backup of portable systems is increasing with the advancement of technology. Many features of portable systems can be improved using scaling methods. In the scaling process, reducing the size of devices causes serious difficulties, including the short channel effect (SCE) and leakage current, which degenerates the characteristics of the systems. Objective: In this review paper, a trending carbon nanotube field effect transistor (CNTFET) technology is discussed in detail. CNTFET can replace the conventional metal oxide semiconductor field effect transistor (MOSFET) technology to overcome the SCE problems in the nanoscale regime and also meet the requirements of portable systems. Methods: The CNTFET is an extremely good nanoscale technology due to its one-dimension band structure, high transconductance, high electron mobility, superior control over channel formation, and better threshold voltage. This technology is used to construct high-performance and low-power circuits by replacing the MOSFET technology. CNTFET in comparison to MOSFET takes the carbon nanotube (CNT) as a channel region. Results: The value of threshold voltage in CNTFET changes with the diameter of CNT. The threshold voltage of the devices controls many parameters at the circuit-level design. Hence, the detailed operation and the characteristics of CNTFET devices are presented in this review paper. The existing CNTFET-based ternary full adder (TFA) circuits are also described in this review paper for the performance evaluation of different parameters. Conclusion: CNTFET technology is the possible solution for the SCE in the nanoscale regime and is capable to design efficient logic circuits. The circuits using the CNTFET technology can provide better performance and various advantages, including fast speed, small area, and low power consumption, in comparison to the MOSFET circuits. Thus, CNTFET technology is the best choice for circuit designs at the nanoscale.

Stable SnAgCu solder joints reinforced by nickel-coated carbon fiber for electronic packaging

Today’s 3D electronic packaging is characterized by smaller size and higher functional density, which generally require multiple reflow cycles. However, due to the Ostwald ripening process of the interfacial intermetallic compound (IMC), the solder joint’s strength would decrease as the number of reflow cycles increases. To address this, we developed a novel composite solder by incorporating nickel-coated carbon fiber (Ni@CF) into the Sn–3.0Ag–0.5Cu (SAC305) solder connection. The study showed that Ni@CF effectively enhanced the stability and reliability of solder joints during multiple reflow processes. Compared with Ni@CF-free equivalents, Ni@CFs promoted the nucleation of interfacial IMC during the solid–liquid reaction and inhibited Ostwald ripening, leading to a refinement of the interfacial IMC grains. As a result, the interface was strengthened, and the shift of shear fracture to the brittle interface seen in the SAC305 solder joint with multiple reflows did not occur in the composite solder joint. Furthermore, carbon fiber strengthened the solder matrix through the load transfer and shear-off mechanisms, depending on its inclination angle with the shear plane. Consequently, the Ni@CFs-reinforced solder joints maintained a shear strength of over 42 MPa throughout ten reflow cycles, while the pristine SAC305 solder joint exhibited decreased shear strength to 33 MPa. This study provides new insights into composite solder joints’ stability and reinforcement characteristics when subjected to multiple reflows.

Improved mechanical properties of Al-xMg-yZn-Cu alloys via optimized Mg/Zn ratio and thermomechanical processing

Three Al-xMg-yZn-1Cu alloys with equal total alloying element contents but different Mg/Zn ratios have been prepared in this work, i.e., Al-6Mg-1Zn-1Cu, Al-5Mg-2Zn-1Cu and Al-4Mg-3Zn-1Cu alloys. The influences of Mg/Zn ratios on microstructure and mechanical properties of heat-treated Al-xMg-yZn-1Cu alloys have been systematically studied. The results show that Al-xMg-yZn-1Cu alloys with higher Zn contents exhibit the faster aging response as Zn atom features the largest diffusion coefficient. Additionally, rod shaped and ellipsoidal T´ precipitates are observed in the Al-6Mg-1Zn-1Cu alloy. While in Al-4Mg-3Zn-1Cu alloy under TMT-2 process, T´ precipitates mainly exist in an ellipsoidal shape, with a higher number density (∼1.79 × 1023 m-3) and smaller size (∼4.1 nm) compared to the Al-6Mg-1Zn-1Cu alloy. The optimized thermomechanical treatment (80 °C/5 h + rolling + 130 °C/x h) could effectively improve the yield strength of Al-5Mg-2Zn-1Cu and Al-4Mg-3Zn-1Cu alloys, with values increasing from ∼419 MPa and ∼441 MPa to ∼454 MPa and ∼470 MPa, respectively. In contrast, the Al-6Mg-1Zn-1Cu alloy exhibit almost no increment in yield strength after the same thermomechanical treatment. This could mainly be attributed to the higher density of T´ precipitates in alloys with higher Zn contents, resulting from the higher nucleation rate of T´ precipitates caused by high contents of Zn atoms featuring fast diffusion rates, with the assistance of dislocations introduced by rolling. This work provides theoretical supports for the development and production of age-hardenable Al-xMg-yZn-1Cu alloys.

Pulsed TIG wire arc additive manufactured 17-4PH stainless steel: Effect of Cu-rich precipitates and δ-ferrite on the mechanical properties

Thin-wall samples of 17-4PH stainless steel were prepared by pulsed TIG wire arc additive manufacturing technology (P-TIG WAAM), and the microstructure and mechanical properties of the samples in different regions (bottom, middle, top) were studied. The results show that the microstructure of the thin-wall samples are mainly consisted of martensite matrix embedded by worm-like (bottom) and strip-shaped (top) δ-ferrite, with a small amount of austenite. The δ-ferrite content gradually decreases along the building direction, resulting in a gradual increase in microhardness from the bottom to the top. Along the building direction, the precipitation density and size distribution of nano-scale CRPs (Cu-rich precipitates) in δ-ferrite and martensite, as well as at the δ-ferrite / martensite interface are significantly different: the CRPs in δ-ferrite is precipitated with lower density, larger size, and inhomogeneous distribution at the bottom region, while that in martensite is precipitated with higher density, smaller size, and homogeneous distribution. At the bottom region, a chain of large size fcc-CRPs (∼65 nm) is precipitated along the δ-ferrite / martensite interface to coordinate the strain between them and improve the strength and ductility simultaneously, thus excellent mechanical properties (tensile strength = 1356±24 MPa, elongation =15.16±2.6%) are obtained. The relationship between the evolution of CRPs and the intrinsic heat treatment (IHT) during P-TIG WAAM is also discussed.

A novel approach for nanobubble generation toward biomedical applications

The stability of free-standing nanobubbles is a long-standing controversial problem due to the Laplace pressure catastrophe at the nanoscale. In most industrial circumstances, a large quantity of surfactants is required as stabilisers or emulsifiers to generate stable bubbles or foams. However, when surfactants exceed a certain level, they can adversely affect living organisms and pose environmental risks. Towards biomedical use, we investigated nanobubble generation through a mini-extruder in amino acid solutions. Herein, we considered glycine (having two pKa values) and lysine (having three pKa values) as two model amino acids, conducting experiments with various concentrations (0.1M, 0.5M and 1M), along with different pH values (above, equal to, and below the isoelectric points of each amino acids; 5.97 for glycine and 9.74 for lysine). Our results showcased the proof of concept that amino acids can stabilise nanobubbles in bulk for a few days. We achieved remarkable products of nanobubbles via nanopores by extrusion, with reproducible size distribution and stability. We also compared the extrusion protocol with the commonly used ultrasound method. It turned out that extrusion generated samples with smaller sizes and higher concentrations than sonication. This study provides a reliable protocol for generating small-scale nanobubbles for biomedical use, showing great potential in drug delivery for medical treatment.

Research on the Training and Application Methods of a Lightweight Agricultural Domain-Specific Large Language Model Supporting Mandarin Chinese and Uyghur

In the field of Natural Language Processing (NLP), the lack of support for minority languages, especially Uyghur, the scarcity of Uyghur language corpora in the agricultural domain, and the lightweight nature of large language models remain prominent issues. This study proposes a method for constructing a bilingual (Uyghur and Chinese) lightweight specialized large language model for the agricultural domain. By utilizing a mixed training approach of Uyghur and Chinese, we extracted Chinese corpus text from agricultural-themed books in PDF format using OCR (Optical Character Recognition) technology, converted the Chinese text corpus into a Uyghur corpus using a rapid translation API, and constructed a bilingual mixed vocabulary. We applied the parameterized Transformer model algorithm to train the model for the agricultural domain in both Chinese and Uyghur. Furthermore, we introduced a context detection and fail-safe mechanism for the generated text. The constructed model possesses the ability to support bilingual reasoning in Uyghur and Chinese in the agricultural domain, with higher accuracy and a smaller size that requires less hardware. It (our work) addresses issues such as the scarcity of Uyghur corpora in the agricultural domain, mixed word segmentation and word vector modeling in Uyghur for widespread agricultural languages, model lightweighting and deployment, and the fragmentation of non-relevant texts during knowledge extraction from small-scale corpora. The lightweight design of the model reduces hardware requirements, facilitating deployment in resource-constrained environments. This advancement promotes agricultural intelligence, aids in the development of specific applications and minority languages (such as agriculture and Uyghur), and contributes to rural revitalization.

Exploring the Theranostic Applications and Prospects of Nanobubbles.

Anticancer medications as well as additional therapeutic compounds, have poor clinical effectiveness due to their diverse distribution, non-selectivity for malignant cells, and undesirable off-target side effects. As a result, ultrasound-based targeted delivery of therapeutic compounds carried in sophisticated nanocarriers has grown in favor of cancer therapy and control. Nanobubbles are nanoscale bubbles that exhibit unique physiochemical properties in both their inner core and outer shell. Manufacturing nanobubbles primarily aims to enhance therapeutic agents' bioavailability, stability, and targeted delivery. The small size of nanobubbles allows for their extravasation from blood vessels into surrounding tissues and site-specific release through ultrasound targeting. Ultrasound technology is widely utilized for therapy due to its speed, safety, and cost-effectiveness, and micro/nanobubbles, as ultrasound contrast agents, have numerous potential applications in disease treatment. Thus, combining ultrasound applications with NBs has recently demonstrated increased localization of anticancer molecules in tumor tissues with triggered release behavior. Consequently, an effective therapeutic concentration of drugs/genes is achieved in target tumor tissues with ultimately increased therapeutic efficacy and minimal side effects on other non-cancerous tissues. This paper provides a brief overview of the production processes for nanobubbles, along with their key characteristics and potential therapeutic uses.

Nanoemulsion of Amber rice bran oil (Oryza sativa L.), characterization and properties

Nanoemulsion of Amber rice bran oil (Oryza sativa L.), characterization and properties

A group theory based topology optimization scheme for the design of inhomogeneous waveguides with dihedral group symmetries

In this paper, we introduce a novel topology optimization scheme dedicated to designing waveguides with inhomogeneities holding rotation and reflection symmetries. To fully exploit the symmetry features of the guide, we build the scheme by first developing a new computational algorithm that combines the Finite Element Method (FEM) with the group representation theory (GRT), i.e., the GRT – FEM algorithm. This combination allows the decomposition of the eigenvalue problem in a classic FEM to orthogonal (decoupled) subproblems. The subproblems are of much smaller sizes and can be treated in parallel, which therefore leads to an improved solver efficiency by an order of magnitude. For a targeted mode profile, the involvement of the GRT does not only enable a pre-selection of the subproblems that are to be optimized, which further improves the computational speed, but also completely avoids potential mode degeneracies, which adversely affects the convergence of the optimization. To validate, the GRT – FEM algorithm is first tested against the results from a full FEM simulation for a guide with inhomogeneities with six-fold rotation and reflection symmetries. Then, as an illustration, the entire scheme is applied to achieve a desired eigenmode with a targeted propagation constant. The proposed scheme does not only provide an efficient design tool for exploiting interesting wave phenomena in waveguiding structures possessing rotation and reflection symmetries, but also lays down a theoretical foundation for systematically integrating symmetries with classic Computational Electromagnetics (CEM) algorithms.

Diversity of Tropical Cyclones Rapid Intensification

AbstractThe study investigates the rapid intensification (RI) of tropical cyclones (TCs) in the Northwestern Pacific. We found that rapid changes in the maximum wind speed (Vmax) and the minimum central pressure (Pmin) are not always concurrent. RI cases can be categorized into three types: (a) RIv, only Vmax strengthens rapidly; (b) RIp, only Pmin decreases rapidly; (c) RIpv, rapid changes in Vmax and Pmin occur concurrently. At the onset of RI, RIv‐type TCs exhibit the weakest intensity and the smallest size, with deep convection concentrated in the inner‐core region; RIp‐type TCs are characterized by the strongest cyclone intensity and the largest outer‐core size, with strong convection covering the inner‐ and outer‐core regions; RIpv‐type TCs show moderate intensity, size, and convection distribution. For RIpv, significant strengthening of wind profile is concentrated in the inner‐core region, while for RIp it is more prominent in the outer‐core.

Cl alloying improves thermal stability and increases luminescence in iodine-rich inorganic perovskites.

The inorganic perovskite CsPbI3 shows promising photophysical properties for a range of potential optoelectronic applications but is metastable at room temperature. To address this, Br can be alloyed into the X-site to create compositions such as CsPbI2Br that are stable at room temperature but have bandgaps >1.9 eV - severely limiting solar applications. Herein, in an effort to achieve phase stable films with bandgaps <1.85 eV, we investigate alloying chlorine into iodine-rich triple-halide CsPb(I0.8Br0.2-x Cl x )3 with 0 < x < 0.1. We show that partial substitution of iodine with bromine and chlorine provides a path to maintain broadband terrestrial absorption while improving upon the perovskite phase stability due to chlorine's smaller size and larger ionization potential than bromine. At moderate Cl loading up to ≈5%, X-ray diffraction reveals an increasingly smaller orthorhombic unit cell, suggesting chlorine incorporation into the lattice. Most notably, this Cl incorporation is accompanied by a significant enhancement over Cl-free controls in the duration of black-phase stability of up to 7× at elevated temperatures. Additionally, we observe up to 5× increased steady state photoluminescence intensity (PL), along with a small blue-shift. In contrast, at high loading (≈10%), Cl accumulates in a second phase that is visible at grain boundaries via synchrotron fluorescence microscopy and negatively impacts the perovskite phase stability. Thus, replacing small fractions of bromine for chlorine in the iodine-rich inorganic perovskite lattice results in distinct improvement thermal stability and optoelectronic quality while minimally impacting the bandgap.

Comparative Effect of Antioxidant and Antibacterial Potential of Zinc Oxide Nanoparticles from Aqueous Extract of Nepeta nepetella through Different Precursor Concentrations.

Antibiotic resistance is a global health crisis caused by the overuse and misuse of antibiotics. Accordingly, bacteria have developed mechanisms to resist antibiotics. This crisis endangers public health systems and medical procedures, underscoring the urgent need for novel antimicrobial agents. This study focuses on the green synthesis of ZnO nanoparticles (NPs) using aqueous extracts from Nepeta nepetella subps. amethystine leaves and stems, employing different zinc sulfate concentrations (0.5, 1, and 2 M). NP characterization included transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD), along with Fourier transform infrared spectroscopy (FTIR) analysis. This study aimed to assess the efficacy of ZnO NPs, prepared at varying concentrations of zinc sulfate, for their capacity to inhibit both Gram-positive and Gram-negative bacteria, as well as their antioxidant potential using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) method. SEM and TEM results showed predominantly spherical NPs. The smallest size (18.5 ± 1.3 nm for leaves and 18.1 ± 1.3 nm for stems) occurred with the 0.5 M precursor concentration. These NPs also exhibited remarkable antibacterial activity against both Gram-positive and Gram-negative bacteria at 10 µg/mL, as well as the highest antioxidant activity, with an IC50 (the concentration of NPs that scavenge 50% of the initial DPPH radicals) of 62 ± 0.8 (µg/mL) for the leaves and 35 ± 0.6 (µg/mL) for the stems. NPs and precursor concentrations were modeled to assess their impact on bacteria using a 2D polynomial equation. Response surface plots identified optimal concentration conditions for antibacterial effectiveness against each species, promising in combating antibiotic resistance.

Characterization of nasal aerodynamics and air conditioning ability using CFD and its application to improve the empty nose syndrome (ENS) submucosal floor implant surgery–Part II virtual surgery

BackgroundInformative virtual surgeries provide useful insights for surgical options to patients. In the case of evaluating surgical treatments for the empty nose syndrome (ENS), reliable CFD virtual surgery is a predictive tool for symptom improvement. MethodsFive submucosal implant surgeries with two different implant volumes and three different implant sites were performed on the diseased side of an ENS patient. In each case, a post-surgery nasal cavity was created based on ENS patient's computed tomography images. The airflow and air-conditioning abilities of these nasal surgery models were computed to examine the effects of implant size and site on the surgical outcomes. Significant findingsThe largest improvements were achieved with the larger submucosal implant size at the lateral site. Airflow was redistributed into the inferior and superior meatuses, enhancing air interactions with the nasal mucus. The increased wall shear stress enhanced mucus secretion and sensation of airflow. The reduced vortex size alleviated the paradoxical nasal obstruction feeling. The results suggested that larger implant sizes and the lateral implant site would be advisable for submucosal implant surgeries on ENS patients. Inferior implant with a smaller size being a second advisable approach in terms of heating and humidification efficiencies.