Small Roll-off Research Articles

Regulation of Multiple Resonance Delayed Fluorescence via Through-Space Charge Transfer Excited State towards High-Efficiency and Stable Narrowband Electroluminescence.

B- and N-embedded multiple resonance (MR) type thermally activated delayed fluorescence (TADF) emitters usually suffer from slow reverse intersystem crossing (RISC) process and aggregation-caused emission quenching. Here, we report the design of a sandwich structure by placing the B-N MR core between two electron-donating moieties, inducing through-space charge transfer (TSCT) states. The proper adjusting of the energy levels brings about a 10-fold higher RISC rate in comparison with the parent B-N molecule. In the meantime, a high photoluminescence quantum yield of 91 % and a good color purity were maintained. Organic light-emitting diodes based on the new MR emitter achieved a maximum external quantum efficiency of 31.7 % and small roll-offs at high brightness. High device efficiencies were also obtained for a wide range of doping concentrations of up to 20 wt % thanks to the steric shielding of the B-N core. A good operational stability with LT95 of 85.2 h has also been revealed. The dual steric and electronic effects resulting from the introduction of a TSCT state offer an effective molecular design to address the critical challenges of MR-TADF emitters.

Improving Electroluminescence Efficiency by Linear Polar Host Capable of Promoting Horizontal Dipole Orientation for Dopant.

In doped organic light-emitting diodes (OLEDs), the host materials play an important role in emitting layers. Most studies about host materials mainly focus on their energy levels and carrier transport behaviors, while less attention is paid to their influence on the dipole orientation of dopants, which closely associate with the light out-coupling efficiency (ηout ) of the device. Herein, a linear polar host material (l-CzTRZ) consisting of carbazole donor, triazine acceptor, and the conjugated para-terphenyl skeleton is developed and its crystal and electronic structures, thermal and electrochemical stabilities, optical property, and carrier transport ability are investigated. l-CzTRZ prefers ordered horizontal orientation and favors electron transport in neat film. More importantly, it can promote horizontal dipole orientation for the dopants via dipole-dipole interaction, furnishing an excellent horizontal dipole ratio of 91.5% and thus a high ηout of 43% for the phosphorescent dopant (PO-01-TB). Consequently, the OLED with l-CzTRZ host and PO-01-TB dopant attains state-of-the-art electroluminescence efficiencies of 135.5cd A-1 , 135.7 lm W-1 and 41.3%, with a small roll-off of 9.7% at 5000cdm-2 luminance. The presented significant impact of the host on the dipole orientation of the dopant shall enlighten the design of host materials to improve OLED performance.

All-fluorescence white organic light-emitting diodes with record-beating power efficiencies over 130 lm W‒1 and small roll-offs

Improving power efficiency (PE) and reducing roll-off are of significant importance for the commercialization of white organic light-emitting diodes (WOLEDs) in consideration of energy conservation. Herein, record-beating PE of 130.7 lm W−1 and outstanding external quantum efficiency (EQE) of 31.1% are achieved in all-fluorescence two-color WOLEDs based on a simple sandwich configuration of emitting layer consisting of sky-blue and orange delayed fluorescence materials. By introducing a red fluorescence dopant, all-fluorescence three-color WOLEDs with high color rendering index are constructed based on an interlayer sensitization configuration, furnishing ultrahigh PE of 110.7 lm W−1 and EQE of 30.8%. More importantly, both two-color and three-color WOLEDs maintain excellent PEs at operating luminance with smaller roll-offs than the reported state-of-the-art WOLEDs, and further device optimization realizes outstanding comprehensive performances of low driving voltages, large luminance, high PEs and long operational lifetimes. The underlying mechanisms of the impressive device performances are elucidated by host-tuning effect and electron-trapping effect, providing useful guidance for the development of energy-conserving all-fluorescence WOLEDs.

Optimizing energy transfer for highly efficient single-emissive-layer white thermally activated delayed fluorescence organic light-emitting diodes.

Thermally activated delayed fluorescence (TADF) white organic light-emitting diodes (WOLEDs) with simplified structures have great potential for daily lighting applications. However, the complicated energy and charge transfer processes between TADF emitters impede the development of single-layer white TADF systems. Here we demonstrate high-efficiency WOLEDs with single-emissive layers composed of blue and yellow TADF emitters with appropriate steric hindrances and energy gaps, which optimize the energy transfer from blue to yellow dopants for rational exciton allocation. As a consequence, the single-emissive-layer WOLEDs achieve the maximum external quantum efficiency beyond 20% and small roll-offs, which are among the best results of full-TADF WOLEDs.

Novel Carbazole/Fluorene-Based Host Material for Stable and Efficient Phosphorescent OLEDs.

A novel host material of "M"-type carbazole/fluorene-based mDCzPF with a high triplet energy by utilizing meta-substituted phenyl groups as linkers was developed. It was demonstrated that the position of the substituents significantly affected the molecular configuration and dipole moment, which played a critical role in the device performances. Red phosphorescent OLED utilizing the "M"-type mDCzPF as the host represented a 10-fold operational lifetime improvement over the OLED using a "V"-type pDCzPF linked by para-substituted phenyl groups as the host because of the good charge transport ability of the mDCzPF. Additionally, the "M"-type mDCzPF host was also compatible with a blue emitting phosphorescent emitter PtNON. The PtNON-doped OLED using mDCzPF as the host exhibited a peak EQE of 18.3% with a small roll off, yet maintained an EQE of 13.3% at a high brightness of 5000 cd/m2. Thus, the novel "M"-type mDCzPF could be employed as stable host material for efficient OLED emitting across the whole visible spectrum. This study should provide a viable method for designing new host materials for the development of stable and efficient phosphorescent OLEDs.

Manipulating the LUMO distribution of quinoxaline-containing architectures to design electron transport materials: Efficient blue phosphorescent organic light-emitting diodes

A series of new quinoxaline-containing compounds, namely, 2,3,6,7-tetrakis(3-(pyridin-3-yl)phenyl)quinoxaline (Tm3PyQ), 2,3,6,7-tetrakis(3-(pyridin-4-yl)phenyl)quinoxaline (Tm4PyQ), 1,4-bis(2,3-dimethyl-7-(pyridin-3-yl)quinoxalin-6-yl)benzene (3PyDQB), and 1,4-bis(2,3-dimethyl-7-(pyridin-4-yl)quinoxalin-6-yl)benzene (4PyDQB) were designed and synthesized as electronic transporting materials. The lowest unoccupied molecular orbital (LUMO) distributions of these compounds vary with the locations of quinoxaline moieties, which result in adjustable intermolecular charge-transfer integrals. All the compounds exhibit favorable electron affinity (2.73–2.88 eV) and good thermostability (glass transition temperatures in the range of 112–148 °C). Using these compounds as electron transport layers, the bis(4,6-(difluorophenyl)pyridinato-N,C2′)picolinate iridium(Ⅲ) (Firpic)-based blue phosphorescent organic light emitting diodes (PhOLEDs) achieve good performances with a maximum current efficiency (ηc,max) of 30.2 cd A−1 and a maximum external quantum efficiency (ηext,max) of 14.2%. Moreover, these efficiencies reveal small roll-offs at high luminance.

Improving Electron Mobility of Tetraphenylethene-Based AIEgens to Fabricate Nondoped Organic Light-Emitting Diodes with Remarkably High Luminance and Efficiency.

Robust light-emitting materials with strong solid-state fluorescence as well as fast and balanced carrier transporting ability are crucial to achieve high-performance organic light-emitting diodes (OLEDs). In this contribution, two linear tetraphenylethene (TPE) derivatives (TPE-TPAPBI and TPE-DPBI) that are functionalized with hole-transporting triphenylamine and/or electron-transporting 1,2-diphenyl-1H-benzimidazole groups are synthesized and fully characterized. Both TPE-TPAPBI and TPE-DPBI have aggregation-induced emission attributes and excellent photoluminescence quantum yields approaching 100% in vacuum deposited films. They also possess good thermal property, giving high decomposition temperatures (480 and 483 °C) and glass-transition temperatures (141 and 157 °C). TPE-TPAPBI and TPE-DPBI present high electron mobilities of 1.80 × 10(-5) and 1.30 × 10(-4) cm(2) V (-1) s(-1), respectively, at an electric field of 3.6 × 10(5) V cm(-1), which are comparable or even superior to that of 1,3,5-tri(1-phenylbenzimidazol-2-yl)benzene. The nondoped OLED device employing TPE-TPAPBI as active layer performs outstandingly, affording ultrahigh luminance of 125 300 cd m(-2), and excellent maximum external quantum, power and current efficiencies of 5.8%, 14.6 lm W(-1), and 16.8 cd A(-1), respectively, with very small roll-offs, demonstrating that TPE-TPAPBI is a highly promising luminescent material for nondoped OLEDs.

On economical timing-error detectors for QAM receivers

This paper deals with timing jitter reduction in the timing recovery loop of a digital QAM receiver. The main contribution, which is derived analytically, is an economical prefilter to reduce the timing jitter in timing recovery loops containing either the early–late or the Gardner timing-error detector (TED). The proposed prefilter has the advantage of being an infinite impulse response filter that is placed inside the TED and runs at the symbol rate. For small roll off factors, it is shown with a computer simulation that a single-pole filter placed inside either the early–late or the Gardner detector is quite effective in reducing the timing jitter.

FM click statistics in the presence of phase noise

The probability distribution function of the FM clicks is derived for the case of a carrier impaired by Wiener-Levy phase noise and detected by a limiter-discriminator receiver with pre- and post-detection filtering. The analysis is performed accounting for the effects of predetection (RF) filtering on signal and phase noise and holds for /spl Delta//spl nu//B/spl Lt/1, /spl Delta//spl nu/ being the 3-dB linewidth of the unmodulated carrier and B the bandwidth of the RF filter. How small /spl Delta//spl nu//B is to be will depend on the kind of RF filter. For the raised cosine filter with small rolloff /spl epsiv/ considered here the analysis holds for /spl Delta//spl nu//B >