Small Molecule-binding Aptamers Research Articles

Kinetic ITC of DNA Aptamers Binding for Small Molecules and Implications for Binding Assays and Biosensors.

The determination of kon and koff values through kinetic analysis is crucial for understanding the intricacies of aptamer-target binding interactions. By employing kinetic ITC, we systematically analyzed a range of ITC data of various aptamers. Upon plotting their kon and koff values as a function of their Kd values, a notable trend emerged. Across a range of Kd values spanning from 28 nM to 864 μM, the kon value decreased from 2×105 M-1 s-1 to 96 M-1 s-1, whereas the koff value increased from 1.03×10-3 s-1 to 0.012 s-1. Thus, both kon and koff contributed to the change of Kd in the same direction, although the range of kon change was larger. Since experiments are often run at close to the Kd value, this concentration effect also played an important role in the observed binding kinetics. The effect of these kinetic parameters on two common sensing mechanisms, including aptamer beacons and strand-displacement assays, are discussed. This work has provided the kinetic values of small molecule binding aptamers and offered insights into aptamer-based biosensors.

Selection of regioselective DNA aptamer for detection of homocysteine in nondeproteinized human plasma

Small molecule-binding aptamers often suffer from high cross reactivity to structure analogues in biological samples, limiting their value for clinical diagnosis. Herein, we present a method to overcome this issue, by performing binding-inhibited organic reaction-based regioselective selection of aptamers against homocysteine (Hcy), which is a marker for diagnosing many disorders including stroke and Alzheimer's. This approach has led to isolation of a DNA aptamer that binds to the alkane thiol chain of Hcy with exceptional specificity against cysteine. It also binds with oxidized Hcy at weaker affinity. Using this new aptamer, we produced a reusable fluorescent optical fiber aptasensor for direct and validated detection of both free and total Hcy in nondeproteinized patient plasma in the diagnostic concentration range. The binding site-specific aptamer selection and optical-fiber-sensing strategy can expand the practical utility of aptamers in clinical diagnosis.

Large SYBR Green I fluorescence enhancement for label-free aptamer-based detection of estradiol

Estradiol (E2) and related estrogens are emerging environmental contaminants that may adversely affect the health of humans, animals, and ecosystems. Many aptamers have been reported for the detection of E2, and our lab recently selected a series of high-affinity and short DNA aptamers that showed various binding orientations to E2, leading to different selectivity patterns. In this work, we report that using SYBR Green I (SGI) as a fluorescence probe, up to 200% fluorescence increase was achieved upon titration of E2 to these aptamers. Such enhancement was the highest among all reported small molecule binding aptamers using SGI for signal generation, although some metal-binding DNA can achieve even higher enhancement. By gradually shortening the stem region of an E2 binding aptamer, we concluded that the enhanced fluorescence was from the aptamer binding pocket upon target binding instead of from the duplexed stem region. Comparison was also made with a few other aptamers including those for caffeine, quinine, uric acid and cortisol, and none of them showed more than 20% fluorescence change. Using the SGI method, the detection limit was calculated to be 2.4 nM E2. We attributed the large fluorescence enhancement to the hydrophobic nature of E2 and the high-affinity binding of the aptamers. This study provides insights into the aptamers that can use SGI for their binding assays and biosensor development.

Isolation of Natural DNA Aptamers for Challenging Small-Molecule Targets, Cannabinoids.

Aptamers are nucleic acid-based affinity reagents that are isolated via an in vitro process known as systematic evolution of ligands by exponential enrichment (SELEX). Despite their great potential for a wide range of analytical applications, there are relatively few high-quality small-molecule binding aptamers, especially for "challenging" targets that have low water solubility and/or limited moieties for aptamer recognition. The use of libraries containing chemically modified bases may improve the outcome of some SELEX experiments, but this approach is costly and yields inconsistent results. Here, we demonstrate that a thoughtfully designed SELEX procedure with natural DNA libraries can isolate aptamers with high affinity and specificity for challenging small molecules, including targets for which such selections have previously failed. We first isolate a DNA aptamer with nanomolar affinity and high specificity for (-)-trans-Δ9-tetrahydrocannabinol (THC), a target previously thought to be unsuitable for SELEX with natural DNA libraries. We subsequently isolate aptamers that exhibit high affinity and cross-reactivity to two other challenging targets, synthetic cannabinoids UR-144 and XLR-11, while maintaining excellent specificity against a wide range of non-target interferents. Our findings demonstrate that natural nucleic acid libraries can yield high-quality aptamers for small-molecule targets, and we outline a robust workflow for isolating other such aptamers in future selection efforts.

High Affinity Aptamer for the Detection of the Biogenic Amine Histamine.

The importance of histamine in various physiological functions and its involvement in allergenic responses make this small molecule one of the most studied biogenic amines. Even though a variety of chromatography-based methods have been described for its analytical determination, the disadvantages they present in terms of cost, analysis time, and low portability limit their suitability for in situ routine testing. In this work, we sought to identify histamine-binding aptamers that could then be exploited for the development of rapid, facile, and sensitive assays for histamine detection suitable for point-of-need analysis. A classic SELEX process was designed employing magnetic beads for target immobilization and the selection was completed after ten rounds. Following Next Generation Sequencing of the last selection rounds from both positive and counter selection magnetic beads, several sequences were identified and initially screened using an apta-PCR affinity assay (APAA). Structural and functional characterization of the candidates resulted in the identification of the H2 aptamer. The high binding affinity of the H2 aptamer to histamine was validated using four independent assays ( KD of 3-34 nM). Finally, the H2 aptamer was used for the development of a magnetic beads-based competitive assay for the detection of histamine in both buffer and synthetic urine, achieving very low limits of detection of 18 pM and 76 pM, respectively, while no matrix effects were observed. These results highlight the suitability of the strategy followed for identifying small molecule-binding aptamers and the compatibility of the selected H2 aptamer with the analysis of biological samples, thus facilitating the development of point-of-care devices for routine testing. Ongoing work is focused on extending the application of the H2 aptamer to the detection of spoilage in meat, fish, and beverages, as well as evaluating the affinity of truncated forms of the aptamer.

Next-level riboswitch development-implementation of Capture-SELEX facilitates identification of a new synthetic riboswitch.

The development of synthetic riboswitches has always been a challenge. Although a number of interesting proof-of-concept studies have been published, almost all of these were performed with the theophylline aptamer. There is no shortage of small molecule-binding aptamers; however, only a small fraction of them are suitable for RNA engineering since a classical SELEX protocol selects only for high-affinity binding but not for conformational switching. We now implemented RNA Capture-SELEX in our riboswitch developmental pipeline to integrate the required selection for high-affinity binding with the equally necessary RNA conformational switching. Thus, we successfully developed a new paromomycin-binding synthetic riboswitch. It binds paromomycin with a KD of 20 nM and can discriminate between closely related molecules both in vitro and in vivo. A detailed structure–function analysis confirmed the predicted secondary structure and identified nucleotides involved in ligand binding. The riboswitch was further engineered in combination with the neomycin riboswitch for the assembly of an orthogonal Boolean NOR logic gate. In sum, our work not only broadens the spectrum of existing RNA regulators, but also signifies a breakthrough in riboswitch development, as the effort required for the design of sensor domains for RNA-based devices will in many cases be much reduced.

RNA-based Capture-SELEX for the selection of small molecule-binding aptamers.

Despite their wide applicability, the selection of small molecule-binding RNA aptamers with both high affinity binding and specificity is still challenging. Aptamers that excel at both binding and structure switching are particularly rare and difficult to find. Here, we present the protocol of a Capture-SELEX that specifically allows the in vitro selection of small-molecule binding aptamers, which are essential building blocks for the design process of synthetic riboswitches and biosensors. Moreover, we provide a comparative overview of our proposed methodology versus alternative in vitro selection protocols with a special focus on the design of the pool. Finally, we have included detailed notes to point out useful tips and pitfalls for future application.

Peptide Synthesis on a Next-Generation DNA Sequencing Platform.

Methods for displaying large numbers of peptides on solid surfaces are essential for high-throughput characterization of peptide function and binding properties. Here we describe a method for converting the >10(7) flow cell-bound clusters of identical DNA strands generated by the Illumina DNA sequencing technology into clusters of complementary RNA, and subsequently peptide clusters. We modified the flow-cell-bound primers with ribonucleotides thus enabling them to be used by poliovirus polymerase 3D(pol) . The primers hybridize to the clustered DNA thus leading to RNA clusters. The RNAs fold into functional protein- or small molecule-binding aptamers. We used the mRNA-display approach to synthesize flow-cell-tethered peptides from these RNA clusters. The peptides showed selective binding to cognate antibodies. The methods described here provide an approach for using DNA clusters to template peptide synthesis on an Illumina flow cell, thus providing new opportunities for massively parallel peptide-based assays.

Label-free electrochemical aptasensor for femtomolar detection of 17β-estradiol

We report an electrochemical aptasensor for the rapid, label-free detection of 17β-estradiol (E2) from femtomolar to micromolar levels. The sensor features an aptamer-functionalised nanoporous conducting polymer electrode whose surface potential is probed via electrochemical impedance spectroscopy. The unprecedented detection limit for E2 is explained via the redistribution of negative charges in the electrode double-layer region when the aptamer adopts a folded conformation around the small neutral target molecule. The sensor responds approximately logarithmically over a wide dynamic range of E2 concentration that spans biological trigger levels, with excellent discrimination against structurally similar molecules including progesterone, and robust operation in human urine. The generality of the approach of using conformationally gated small molecule binding aptamers is highlighted with a further example of adenosine detection via the adenosine binding aptamer.

Confined gold nanoparticles enhance the detection of small molecules in label-free impedance aptasensors.

A controlled architecture of nanoelectrodes, of a similar size to small molecule-binding aptamers, is synthesized inside nanoporous alumina. Gold nanoparticles with a controlled size (about 2 nm) are electrogenerated in the alumina cavities, showing a fast electron transfer process toward ferrocyanide. These uncapped nanoparticles are easily modified with a thiol-containing aptamer for label-free detection of adenosine monophosphate by electrochemical impedance spectroscopy. Our results show that the use of a limited electrical conducting surface inside an insulating environment can be very sensitive to conformational changes, introducing a new approach to the detection of small molecules, exemplified here by the direct and selective detection of adenosine monophosphate at the nanomolar scale.

An in solution assay for interrogation of affinity and rational minimer design for small molecule-binding aptamers.

Aptamers are short single-stranded oligonucleotides that fold into unique three-dimensional structures, facilitating selective and high affinity binding to their cognate targets. It is not well understood how aptamer-target interactions affect regions of structure in an aptamer, particularly for small molecule targets where binding is often not accompanied by a dramatic change in structure. The DNase I footprinting assay is a classical molecular biology technique for studying DNA-protein interactions. The simplest application of this method permits identification of protein binding where DNase I digestion is inhibited. Here, we describe a novel variation of the classical DNase I assay to study aptamer-small molecule interactions. Given that DNase I preferentially cleaves duplex DNA over single-stranded DNA, we are able to identify regions of aptamer structure that are affected by small molecule target binding. Importantly, our method allows us to quantify these subtle effects, providing an in solution measurement of aptamer-target affinity. We applied this method to study aptamers that bind to the mycotoxin fumonisin B1, allowing the first identification of high affinity putative minimers for this important food contaminant. We confirmed the binding affinity of these minimers using a magnetic bead binding assay.

Ligand-induced conformational capture of a synthetic tetracycline riboswitch revealed by pulse EPR

RNA aptamers are in vitro-selected binding domains that recognize their respective ligand with high affinity and specificity. They are characterized by complex three-dimensional conformations providing preformed binding pockets that undergo conformational changes upon ligand binding. Small molecule-binding aptamers have been exploited as synthetic riboswitches for conditional gene expression in various organisms. In the present study, double electron-electron resonance (DEER) spectroscopy combined with site-directed spin labeling was used to elucidate the conformational transition of a tetracycline aptamer upon ligand binding. Different sites were selected for post-synthetic introduction of either the (1-oxyl-2,2,5,5-tetramethylpyrroline-3-methyl) methanethiosulfonate by reaction with a 4-thiouridine modified RNA or of 4-isocyanato-2,6-tetramethylpiperidyl-N-oxid spin label by reaction with 2'-aminouridine modified RNA. The results of the DEER experiments indicate the presence of a thermodynamic equilibrium between two aptamer conformations in the free state and capture of one conformation upon tetracycline binding.