Small Linkers Research Articles

Clickable HaloTag ligands for live cell labeling and imaging

Self-labeling protein (SLP) tags, such as HaloTag, have gained considerable interest as advanced tools for live cell labeling. However, the chloroalkane-based substrates that can be directly used for protein labeling are limited. Here, we report two bioorthogonal small molecule linkers, chloroalkane-tetrazine (CA-Tz) and chloroalkane-azide (CA-N3), which can penetrate cell membranes and facilitate click chemistry-based labeling in live cells. We compare their labeling capability using two clickable silicon rhodamine dyes (SiR-PEG3-TCO and SiR-PEG4-DBCO). Confocal imaging results demonstrate that using CA-Tz and SiR-PEG3-TCO dye exhibits superior intracellular labeling with low nonspecific signals. We subsequently compared the photostability of SiR dyes with that of green fluorescent proteins (mEmerald). Total internal reflection fluorescence (TIRF) imaging indicates that SiR dyes exhibit superior photostability under identical excitation conditions, making them suitable for long-term cell imaging. Furthermore, SiR dyes labeling also shows high structure retention for the fourth-order super-resolution optical fluctuation imaging (SOFI) compared to fluorescent proteins. This study presents clickable HaloTag linkers as effective tools for live cell labeling and imaging, highlighting the high-quality labeling of chloroalkane linkers and clickable dyes for live cell imaging.

Selective Tumor Hypoxia Targeting Using M75 Antibody Conjugated Photothermally Active MoOx Nanoparticles.

Photothermal therapy (PTT) mediated at the nanoscale has a unique advantage over currently used cancer treatments, by being spatially highly specific and minimally invasive. Although PTT combats traditional tumor treatment approaches, its clinical implementation has not yet been successful. The reasons for its disadvantage include an insufficient treatment efficiency or low tumor accumulation. Here, we present a promising new PTT platform combining a recently emerged two-dimensional (2D) inorganic nanomaterial, MoOx, and a tumor hypoxia targeting element, the monoclonal antibody M75. M75 specifically binds to carbonic anhydrase IX (CAIX), a hypoxia marker associated with many solid tumors with a poor prognosis. The as-prepared nanoconjugates showed highly specific binding to cancer cells expressing CAIX while being able to produce significant photothermal yield after irradiation with near-IR wavelengths. Small aminophosphonic acid linkers were recognized to be more effective over the combination of poly(ethylene glycol) chain and biotin-avidin-biotin bridge in constructing a PTT platform with high tumor-binding efficacy. The in vitro cellular uptake of nanoconjugates was visualized by high-resolution fluorescence microscopy and label-free live cell confocal Raman microscopy. The key to effective cancer treatment may be the synergistic employment of active targeting and noninvasive, tumor-selective therapeutic approaches, such as nanoscale-mediated PTT. The use of active targeting can streamline nanoparticle delivery increasing photothermal yield and therapeutic success.

A Potential Lead for Insect Growth Regulator: Design, Synthesis, and Biological Activity Evaluation of Novel Hexacyclic Pyrazolamide Derivatives.

Ecdysone receptor (EcR) and chitinase play a critical role in the molting stage of insect pests. Each of them is considered a promising target for the development of novel insect growth regulators (IGRs). In the present paper, a total of 24 (23 novel) hexacyclic pyrazolamide derivatives were designed and synthesized by reducing the heptacycle and inserting small flexible linkers on the basis of the previously discovered dual-target compound D-27 acting simultaneously on EcR and Ostrinia furnacalis chitinase (OfChtI). Their insecticidal activities against Plutella xylostella, Spodoptera frugiperda, and Ostrinia furnacalis larvae were evaluated. The results revealed that the insecticidal activity was not significantly enhanced when the heptacycle on the pyrazole ring was reduced to a hexacycle. However, the insertion of an additional methylene spacer between the substituted phenyl ring and the amide bond can improve the insecticidal activity. Among the derivatives, the most potent compound, 6j, exhibited promising insecticidal activities against P. xylostella and S. frugiperda. Further protein binding assays and molecular docking indicated that 6j could target both EcR and OfChtI, and is a potential lead compound for IGRs. The present work provides valuable clues for the development of new dual-target IGRs.

Fluorescent naphthalimide boronates as theranostics: structural investigations, confocal fluorescence and multiphoton fluorescence lifetime imaging microscopy in living cells.

New design and synthetic strategies were developed to generate functional phenyl boronic acid (BA)-based fluorescent probes incorporating the 1,8-naphthalimide (NI) tag. This fluorescent core was anchored onto the BA unit through small organic linkers consisting of nitrogen groups which can arrest, and internally stabilise the phenyl-boronate units. The newly synthesised fluorophores were characterised spectroscopically by NMR spectroscopy and mass spectrometry and evaluated for their ability to bind to a naturally occurring polysaccharide, β-d-glucan in DMSO and simultaneously as act as in vitro cell imaging reagents. The uptake of these new NI-boronic acid derivatives was studied living cancer cells (HeLa, PC-3) in the presence, and absence, of β-d-glucan. Time-correlated single-photon counting (TCSPC) of DMSO solutions and two-photon fluorescence-lifetime imaging microscopy (FLIM) techniques allowed an insight into the probes' interaction with their environment. Their cellular uptake and distributions were imaged using laser scanning confocal fluorescence microscopy under single- and two-photon excitation regimes (λmax 910 nm). FLIM facilitated the estimation of the impact of the probe's cellular surroundings using the fluorophore lifetime. The extent to which this was mediated by the β-d-glucan was visualised by 2-photon FLIM in living cells. The fluorescence lifetime observed under a range of temperatures varied appreciably, indicating that changes in the environment can be sensed by these probes. In all cases, the cellular membrane penetration of these new probes was remarkable even under variable temperature conditions and localisation was widely concentrated in the cellular cytoplasm, without specific organelle trapping: we conclude that these new probes show promise for cellular imaging in living cancer cells.

Characteristics of the GlnH and GlnX Signal Transduction Proteins Controlling PknG-Mediated Phosphorylation of OdhI and 2-Oxoglutarate Dehydrogenase Activity in Corynebacterium glutamicum.

In Corynebacterium glutamicum the protein kinase PknG phosphorylates OdhI and thereby abolishes the inhibition of 2-oxoglutarate dehydrogenase activity by unphosphorylated OdhI. Our previous studies suggested that PknG activity is controlled by the periplasmic binding protein GlnH and the transmembrane protein GlnX, because ΔglnH and ΔglnX mutants showed a growth defect on glutamine similar to that of a ΔpknG mutant. We have now confirmed the involvement of GlnH and GlnX in the control of OdhI phosphorylation by analyzing the OdhI phosphorylation status and glutamate secretion in ΔglnH and ΔglnX mutants and by characterizing ΔglnX suppressor mutants. We provide evidence for GlnH being a lipoprotein and show by isothermal titration calorimetry that it binds l-aspartate and l-glutamate with moderate to low affinity, but not l-glutamine, l-asparagine, or 2-oxoglutarate. Based on a structural comparison with GlnH of Mycobacterium tuberculosis, two residues critical for the binding affinity were identified and verified. The predicted GlnX topology with four transmembrane segments and two periplasmic domains was confirmed by PhoA and LacZ fusions. A structural model of GlnX suggested that, with the exception of a poorly ordered N-terminal region, the entire protein is composed of α-helices and small loops or linkers, and it revealed similarities to other bacterial transmembrane receptors. Our results suggest that the GlnH-GlnX-PknG-OdhI-OdhA signal transduction cascade serves to adapt the flux of 2-oxoglutarate between ammonium assimilation via glutamate dehydrogenase and energy generation via the tricarboxylic acid (TCA) cycle to the availability of the amino group donors l-glutamate and l-aspartate in the environment. IMPORTANCE Actinobacteria comprise a large number of species playing important roles in biotechnology and medicine, such as Corynebacterium glutamicum, the major industrial amino acid producer, and Mycobacterium tuberculosis, the pathogen causing tuberculosis. Many actinobacteria use a signal transduction process in which the phosphorylation status of OdhI (corynebacteria) or GarA (mycobacteria) regulates the carbon flux at the 2-oxoglutarate node. Inhibition of 2-oxoglutarate dehydrogenase by unphosphorylated OdhI shifts the flux of 2-oxoglutarate from the TCA cycle toward glutamate formation and, thus, ammonium assimilation. Phosphorylation of OdhI/GarA is catalyzed by the protein kinase PknG, whose activity was proposed to be controlled by the periplasmic binding protein GlnH and the transmembrane protein GlnX. In this study, we combined genetic, biochemical, and structural modeling approaches to characterize GlnH and GlnX of C. glutamicum and confirm their roles in the GlnH-GlnX-PknG-OdhI-OdhA signal transduction cascade. These findings are relevant also to other Actinobacteria employing a similar control process.

Insertion of Small Flexible Linkers as a Useful Scaffold Hopping Tool in Agrochemistry

Inserting small flexible linkers of only one- to three-atom chain lengths into a molecular backbone is an important scaffold hopping manipulation. Analogues derived from biologically active compounds through the utilization of such a strategy are often similar in shape and physicochemical properties and, therefore, likely to exhibit similar potency. This review will demonstrate how the elongation with oxygen, amino, methylene, ethylene, vinyl, ethynyl, and CH2O bridges led to the discovery of highly active agrochemicals.

Efficient Human Acute Myeloid Leukemia Targeting By Universal Chimeric Antigen Receptor T-Cells Via Combinatorial Use of Linkers

Chimeric antigen receptor (CAR) T-cells are genetically engineered T-cells with potent biocidal activity against respective target-expressing cells. Recently, CAR T-cells have been successfully used clinically to eradicate B cell-derived malignancies by targeting B-cell lineage specific surface antigens (e.g. CD19, BCMA). However, several limitations of current single-antigen targeting CAR T-cell therapies are becoming evident: a) low target tumor-antigen expression might lead to low CAR T-cell targeting efficacy; b) single antigen-targeting might lead to rapid selection of tumor cells with low or loss of antigen expression; c) single antigen-targeting does frequently not generate a high tumor-selectivity as tumor-antigens are frequently also expressed on healthy tissues; d) production of single-antigen CAR T-cells is time- and resource-consuming but results in effectors that target only one antigen; e) on-target off-tumor as well as off-target side-effects are difficult to control without terminally eliminating CAR T-cells in the recipient. While a-c) might be overcome by combinatorial tumor-antigen targeting, d-e) might be addressed by production of Universal CAR T-cells that recognize a specific tag on selective bridging molecules with short half-life.To address some of these limitations in principle, we have here developed universal CAR T-cells targeting fluorescein, as well as fluorescein-labeled antibody-constructs directed against several cell surface antigens, that would serve as versatile, combinatorial selective linkers and, upon target binding, also CAR T-cells activators. We then tested the system on human acute myeloid leukemia (AML) cell lines and primary patient AML blasts. Specifically, we engineered CAR T-cells, termed FluA-CAR T-cells, to display the anti-fluorescein engineered lipocalin FluA, which mediated recognition of randomly or site-specifically fluorescein-labeled antibodies in IgG or short half-life diabody (Db) format, directed against the frequently AML expressed antigens CD33, CD117 and CD371. Site-specific chemical modification methods and cysteine-tagged Db mediated the strongest AML killing results in vitro over a broad range of antibody concentrations.We then hypothesized that FluA-CAR T-cells, targeting AML cells via combinatorial use of linker molecules adapted to specific AML antigen-expression profiles, would allow to most efficiently eliminate AML cells in a dose- and timely-regulated fashion. To this end, we tested single and combinatorial use of fluoresceinated anti-CD117 Db and anti-CD371 Db on MOLM13 AML cell lines, engineered to be either CD117 highCD371 neg, CD117 negCD371 high, or CD117 highCD371 high. Indeed, combination of anti-CD117 and anti-CD371 Db-linkers, resulted in significantly improved MOLM13 cell lysis compared to equimolar concentrations of single agents in vitro (example figure). We then tested the same approach, targeting CD117 +CD371 + primary AML cells from two different patients, using either patient-derived or allogeneic FluA CAR T-cells. Again, the combinatorial use of linkers generated a significantly higher AML cell lysis than the use of single Db linkers.We thus here provide proof-of-concept for the generation of highly potent universal targeting FluA CAR T-cells from healthy donors and AML patients. By choosing suitable CAR-adaptors with respect to their conjugation chemistry and size, it is possible to tightly regulate CAR-T cell activity against CD33, CD117 and CD371 expressing AML cells and likely any tumor cell expressed antigen. Short half-life small molecule linkers will allow to control FluA CAR T-cell on-off activity and combinatorial use of linkers will allow to maximize anti-tumor activity and to minimize on-target off-tumor toxicity. [Display omitted] DisclosuresMyburgh: University of Zurich: Patents & Royalties: CD117xCD3 TEA. Neri: Philogen S.p.A.: Current Employment, Current equity holder in publicly-traded company, Divested equity in a private or publicly-traded company in the past 24 months, Membership on an entity's Board of Directors or advisory committees, Patents & Royalties: Multiple patents on vascular targeting; ETH Zurich: Patents & Royalties: CD117xCD3 TEA. Manz: CDR-Life Inc: Consultancy, Current holder of stock options in a privately-held company; University of Zurich: Patents & Royalties: CD117xCD3 TEA.

Polymer Synthesis Based on Self‐Accelerating 1,3‐Dipolar Cycloaddition Click Reactions†

AbstractThis review reports our recent work on developing polymer synthesis methods based on a self‐accelerating double‐strain‐promoted 1,3‐dipole‐alkyne cycloaddition (DSPDAC) click reaction. In DSPDAC, the cycloaddition of 1,3‐dipole with the first alkyne of sym‐dibenzo‐1,5‐cyclooctadiene‐3,7‐diyne (DIBOD) activates the second unreacted alkyne, which reacts with 1,3‐dipole much faster than the original alkyne of DIBOD. When using DIBOD and bis‐dipole compounds as monomer pairs, the self‐accelerating property of DSPDAC allows us to develop a stoichiometric imbalance‐promoted step‐growth polymerization method. It could produce polymers with ultrahigh molecular weight in the presence of excess DIBOD monomers. When using DIBOD to ring‐close linear polymers with 1,3‐dipole end groups, the self‐accelerating property of DSPDAC facilitates us to develop a unique bimolecular ring‐closure method. It could efficiently prepare pure cyclic polymers in the presence of excess DIBOD small linkers to linear polymer precursors.

Versatile Bimolecular Ring-Closure Method for Cage-Shaped Polymers

A scalable bimolecular ring-closure method was reported to prepare cage-shaped polymers using a self-accelerating double-strain-promoted azide–alkyne click reaction (DSPAAC) as the cyclization reaction. The success of this method was illustrated by the formation of four-arm and six-arm cage-shaped polycaprolactone (PCL). The well-defined four-arm and six-arm star PCL with para-ether bonded 2,6-diisopropylphenyl azide terminal groups were prepared by a living ring-opening polymerization and an end group modification process. The four-arm and six-arm cage-shaped PCL were then produced by employing the small linkers containing two or three sym-dibenzo-1,5-cyclooctadiene-3,7-diyne (DIBOD) groups to cyclize the corresponding four-arm and six-arm star PCL precursors. By slowly feeding a concentrated star PCL solution into a small volume of small linker solution, the productivities were optimized as around 0.8 g/L/15 h for the formation of four-arm and six-arm cage-shaped PCL with purities above 70%.

Aluminum textile-based binder-free nanostructured battery cathodes using a layer-by-layer assembly of metal/metal oxide nanoparticles

Despite considerable interest in textile-based battery electrodes with large surface areas and mechanical flexibility, issues have restricted further advances in the energy performance of textile electrodes. These issues include the ineffective incorporation of conductive and/or active components into textile frameworks, the poor charge transfer between energy materials, and the formation of numerous unstable interfaces within textile electrodes. Herein, we introduce an aluminum textile-based lithium-ion battery cathode with remarkable areal capacity, high rate performance, and good cycling stability. Ligand exchange reaction-induced layer-by-layer (LbL) assembly of metal nanoparticles and small molecule linkers, with subsequent metal electroplating, perfectly converted polyester textiles to 3D-porous aluminum textiles that can be used as current collectors and high-energy reservoirs. The consecutive LbL assembly of high-energy LiFePO4 and conductive indium tin oxide nanoparticles onto the aluminum textiles using small organic linkers significantly increased the areal capacity and cycling stability (at least 580 cycles) of the resultant cathode, allowing facile charge transfer within the textile electrodes. Furthermore, the areal capacity of these textile electrodes increased from 1.07 to 3.28 mA h cm−2, with an increase in the folding number from 0 to 2.

Synthesis of a Bottlebrush Polymer Gel with a Uniform and Controlled Network Structure.

A structurally controlled polymer gel was synthesized by end-linking a monodisperse star polymer in which each arm was a bottlebrush (BB) polymer densely grafted with side chains. The combination of atom transfer radical polymerization and postpolymerization modification yielded a four-arm star-shaped BB polymer with a controlled polymerization degree of the backbone and side chains. The reactive end groups introduced at the end of each arm reacted with small bifunctional linkers in solution, leading to the formation of a BB polymer gel. The elasticity study on the BB polymer gel suggested its uniform network structure. Our method enables precise and uniform tuning of essential structural parameters across the entire BB polymer network, which will be beneficial for developing soft materials with desired mechanical responses.

Layer-by-Layer Assembled Oxide Nanoparticle Electrodes with High Transparency, Electrical Conductivity, and Electrochemical Activity by Reducing Organic Linker-Induced Oxygen Vacancies.

Solution-processable transparent conducting oxide (TCO) nanoparticle (NP)-based electrodes are limited by their low electrical conductivity, which originates from the low level of oxygen vacancies within NPs and the contact resistance between neighboring NPs. Additionally, these electrodes suffer from the troublesome trade-off between electrical conductivity and optical transmittance and the restricted shape of substrates (i.e., only flat substrates). An oxygen-vacancy-controlled indium tin oxide (ITO) NP-based electrode is introduced using carbon-free molecular linkers with strong chemically reducing properties. Specifically, ITO NPs are layer-by-layer assembled with extremely small hydrazine monohydrate linkers composed of two amine groups, followed by thermal annealing. This approach markedly improves the electrical conductivity of ITO NP-based electrodes by significantly increasing the level of oxygen vacancies and decreasing the interparticle distance (i.e., contact resistance) without sacrificing optical transmittance. The prepared electrodes surpass the optical/electrical performance of TCO NP-based electrodes reported to date. Additionally, the nanostructured ITO NP films can be applied to more complex geometric substrates beyond flat substrates, and furthermore exhibit a prominent electrochemical activity. This approach can provide an important basis for developing a wide range of highly functional transparent conducting electrodes.

Capture and displacement-based release of the bicarbonate anion by calix[4]pyrroles with small rigid straps.

Two-phenoxy walled calix[4]pyrroles 1 and 2 strapped with small rigid linkers containing pyridine and benzene, respectively, have been synthesized. 1H NMR spectroscopic analyses carried out in CDCl3 revealed that both of receptors 1 and 2 recognize only F− and HCO3− among various test anions with high preference for HCO3− (as the tetraethylammonium, TEA+ salt) relative to F− (as the TBA+ salt). The bound HCO3− anion was completely released out of the receptors upon the addition of F− (as the tetrabutylammonium, TBA+ salt) as a result of significantly enhanced affinities and selectivities of the receptors for F− once converted to the TEAHCO3 complexes. Consequently, relatively stable TEAF complexes of receptors 1 and 2 were formed via anion metathesis occurring within the receptor cavities. By contrast, the direct addition of TEAF to receptors 1 and 2 produces different complexation products initially, although eventually the same TEAF complexes are produced as via sequential TEAHCO3 and TBAF addition. These findings are rationalized in terms of the formation of different ion pair complexes involving interactions both inside and outside of the core receptor framework.

An Efficient Ring-Closure Method for Preparing Well-Defined Cyclic Polynorbornenes.

An efficient bimolecular ring-closure method is developed to prepare the well-defined cyclic polynorbornenes by combining the living ring-opening metathesis polymerization (ROMP) with the self-accelerating double strain-promoted azide-alkyne cycloaddition (DSPAAC) reaction. In this method, ROMP is used to synthesize the well-defined linear polynorbornenes with both azide terminals by virtue of a N-hydroxysuccinimide-ester-functionalized Grubbs initiator following the modification of polymer end groups. DSPAAC click reaction is then used to ring-close the linear polymer precursors and prepare the corresponding well-defined cyclic polynorbornenes using the sym-dibenzo-1,5-cyclooctadiene-3,7-diyne (DIBOD) as small linkers. The self-accelerating DSPAAC ring-closing reaction facilitates this method to efficiently prepare pure cyclic polynorbornenes in the presence of a molar excess of DIBOD small linkers to the linear polynorbornene precursors. This is the first report to prepare well-defined polynorbornenes with cyclic topology based on the ring-closure strategy for cyclic polymers.

Transglutaminase-Mediated Conjugations.

Microbial transglutaminase (MTGase) catalyzes site-specific transpeptidation between a primary amine within linkers and the side chain of glutamine 295 within deglycosylated chimeric, humanized, and human IgG1s, affording homogeneous antibody-drug conjugates (ADCs). This method can be empowered by mutation of asparagine 297, insertion of a glutamine-containing peptide tag, and the use of branched linkers. Such modifications facilitate the conjugation process and provide flexibility in adjusting the conjugation site and drug-to-antibody ratio (DAR). Here, we present a protocol optimized in our group for MTGase-mediated linker incorporation and subsequent click chemistry-based payload installation. Both small linear linkers and bulky branched linkers can be incorporated into the Fc moiety within various antibodies, affording homogeneous ADCs with defined DARs. Thanks to the high homogeneity, ADCs constructed using this method can be analyzed using a single-quadrupole electrospray ionization (ESI) mass spectrometer, which many laboratories own for regular analysis of small molecules and peptides. The approach presented here allows for facile and cost-effective production of various homogeneous ADCs and other antibody conjugates for research and clinical purposes.

Charge-Transfer-Modulated Transparent Supercapacitor Using Multidentate Molecular Linker and Conductive Transparent Nanoparticle Assembly.

One of the most critical issues in preparing high-performance transparent supercapacitors (TSCs) is to overcome the trade-off between areal capacitance and optical transmittance as well as that between areal capacitance and rate capability. Herein, we introduce a TSC with high areal capacitance, fast rate capability, and good optical transparency by minimizing the charge transfer resistance between pseudocapacitive nanoparticles (NPs) using molecular linker- and conductive NP-mediated layer-by-layer (LbL) assembly. For this study, bulky ligand-stabilized manganese oxide (MnO) and indium tin oxide (ITO) NP multilayers are LbL-assembled through a ligand exchange reaction between native ligands and small multidentate linkers (tricarballylic acid). The introduced molecular linker substantially decreases the separation distance between neighboring NPs, thereby reducing the contact resistance of electrodes. Moreover, the periodic insertion of ITO NPs into the MnO NP-based electrodes can lower the charge transfer resistance without a meaningful loss of transmittance, which can significantly improve the areal capacitance. The areal capacitances of the ITO NP-free electrode and the ITO NP-incorporated electrode are 24.6 mF cm-2 (at 61.6% transmittance) and 40.5 mF cm-2 (at 60.8%), respectively, which outperforms state of the art TSCs. Furthermore, we demonstrate a flexible symmetric solid-state TSC that exhibits scalable areal capacitance and optical transmittance.

A versatile method for cyclic polymers from conjugated and unconjugated vinyl monomers

ABSTRACTA versatile method was introduced to prepare cyclic polymers from both conjugated and unconjugated vinyl monomers. It was developed on the combination of the RAFT polymerization and the self‐accelerating double strain‐promoted azide‐alkyne click (DSPAAC) reaction. In this approach, a switchable chain transfer agent 1 was designed to have hydroxyl terminals and a functional pyridinyl group. The protonation and deprotonation of pyridinyl group endowed the chain transfer agent 1 with a switchable control capability to RAFT polymerization of both conjugated and unconjugated vinyl monomers. Based on this, RAFT polymerization and the following hydroxyl end group modification were used to prepare various azide‐terminated linear polymers including polystyrene, poly(N‐vinylcarbazole), and polystyrene‐block‐poly(N‐vinylcarbazole). Using sym‐dibenzo‐1,5‐cyclooctadiene‐3,7‐diyne (DBA) as small linkers, the corresponding cyclic polymers were then prepared via the DSPAAC reaction between DBA and azide terminals of the linear precursors. Due to the self‐accelerating property of DSPAAC reaction, this bimolecular ring‐closing reaction could efficiently produce the pure cyclic polymers using excess molar amounts of DBA to linear polymer precursors. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1811–1820

Bimetallic Cobalt-Copper MOF Material for Bifunctional Oxygen Electrocatalysis

Recently, metal organic frameworks (MOFs) have garnered wide attention for their ability to efficiently and effectively catalyze reactions such a water oxidation, which includes oxygen evolution reactions (OER) and hydrogen evolution reactions (HER), and oxygen reduction reactions (ORR). Still MOFs often suffer from low conductivity, small pore size and organic linkers can often block the active metal centers. However, MOFs can be tailored to overcome these deficiencies by modifying their active metal centers and organic linkers that that can allow MOFs to have: 1. highly porous structure for enhanced diffusion, 2. high surface area 3. improved adsorption of reactants, 4. chemical stability, 5. thermal stability and 6. high conductivity.1,2,3 These attributes aid in enhancing electrocatalytic performance of this material. In addition, the facile synthesis, robust nature and use of abundant materials that are inexpensive, such as transitional metals and organic ligands, help make MOFs a promising material to use for electrocatalysis of water oxidation and oxygen reduction reactions. In this study a bimetallic MOF was synthesized via a solvothermal method using cobalt chloride, copper chloride and 2-aminobenzene-1,4-dicarboxylic acid. Cobalt and copper were chosen as metal ion centers because of their low cost in comparison to conventional noble metals, their known catalytic activity towards ORR and OER in both alkaline and acidic media, and the complexes they form with 2-aminobenzene-1,4-dicarboxylic acid that lead to octahedral structures, heterogeneity in the MOF and unsaturated coordination in active metal sites.2,3 The resulting bimetallic MOF material formed a petal like morphology that showed catalytic activity both towards ORR and OER in an alkaline environment, with a half way potential 0.76 V versus RHE for ORR in 0.1 M KOH and an overpotential of 0.31 V at 10 mA/cm2 versus RHE for OER in 1 M KOH. Making this Cu-Co MOF material a potential bifunctional electrocatalyst electrode material for applications in regenerative fuel cells and metal-air batteries.

Catalytic Cleavage of Disulfide Bonds in Small Molecules and Linkers of Antibody-Drug Conjugates.

In cells, catalytic disulfide cleavage is an essential mechanism in protein folding and synthesis. However, detailed enzymatic catalytic mechanism relating cleavage of disulfide bonds in xenobiotics is not well understood. This study reports an enzymatic mechanism of cleavage of disulfide bonds in xenobiotic small molecules and antibody conjugate (ADC) linkers. The chemically stable disulfide bonds in substituted disulfide-containing pyrrolobenzodiazepine (PBD, pyrrolo[2,1-c][1,4]benzodiazepine) monomer prodrugs in presence of glutathione or cysteine were found to be unstable in incubations in whole blood of humans and rats. It was shown the enzymes involved were thioredoxin (TRX) and glutaredoxin (GRX). For a diverse set of drug-linker conjugates, we determined that TRX in the presence of TRX-reductase and NADPH generated the cleaved products that are consistent with catalytic disulfide cleavage and linker immolation. GRX was less rigorously studied; in the set of compounds studied, its role in the catalytic cleavage was also confirmed. Collectively, these in vitro experiments demonstrate that TRX as well as GRX can catalyze the cleavage of disulfide bonds in both small molecules and linkers of ADCs.

Room‐Temperature Metallic Fusion‐Induced Layer‐by‐Layer Assembly for Highly Flexible Electrode Applications

AbstractTo fabricate flexible electrodes, conventional silver (Ag) nanomaterials have been deposited onto flexible substrates, but the formed electrodes display limited electrical conductivity due to residual bulky organic ligands, and thus postsintering processes are required to improve the electrical conductivity. Herein, an entirely different approach is introduced to produce highly flexible electrodes with bulk metal–like electrical conductivity: the room‐temperature metallic fusion of multilayered silver nanoparticles (NPs). Synthesized tetraoctylammonium thiosulfate (TOAS)‐stabilized Ag NPs are deposited onto flexible substrates by layer‐by‐layer assembly involving a perfect ligand‐exchange reaction between bulky TOAS ligands and small tris(2‐aminoethyl)amine linkers. The introduced small linkers substantially reduce the separation distance between neighboring Ag NPs. This shortened interparticle distance, combined with the low cohesive energy of Ag NPs, strongly induces metallic fusion between the close‐packed Ag NPs at room temperature without additional treatments, resulting in a high electrical conductivity of ≈1.60 × 105 S cm−1 (bulk Ag: ≈6.30 × 105 S cm−1). Furthermore, depositing the TOAS–Ag NPs onto cellulose papers through this approach can convert the insulating substrates into highly flexible and conductive papers that can be used as 3D current collectors for energy‐storage devices.