Small-angle Neutron Scattering Research Articles

Micellar Nanogels from Alginate-Based Diblock Copolysaccharides.

Alginates aremarine polysaccharides known for their ability to selectively bind calcium ions and form hydrogels. Theyare widely used in biomedical applications but are challenging to produce as nanogels. Here we introduce a self-assembly route to create stable alginate-based nanogels under near-equilibrium conditions. Guluronate (G) blocks, which interact with divalent cations such as Ca2+, Ba2+, and Sr2+, were extracted from alginates and covalently linked through their reducing end to the reducing end of dextran (Dex) chains, forming linear block copolymers that self-assemble into micellar nanogels with a core-corona structure in the presence of these ions. Real-time dynamic light scattering (DLS) and small-angle neutron scattering (SANS) were used to study the self-assembly mechanism of the copolymer during dialysis against divalent ions. For the G12-b-Dex51 copolymer, we achieved spherical micelles with an 8 nm radius and an aggregation number of around 20. Although the type of divalent cation affected micelle stability, it did not influence their size. Micellar nanogels are dynamic structures, capable of ion exchange, and can disassemble with chelating agents like ethylenediamine tetraacetic acid (EDTA).

Pinhole small-angle neutron scattering based approach for desmearing slit ultra-small-angle neutron scattering data

Presented here is an effective approach to desmearing slit ultra-small-angle neutron scattering (USANS) data, based on complementary small-angle neutron scattering (SANS) measurements, leading to a seamless merging of these data sets. The study focuses on the methodological aspects of desmearing USANS data, which can then be presented in the conventional manner of SANS, enabling a broader pool of data analysis methods. The key innovation lies in the use of smeared SANS data for extrapolating slit USANS, offering a self-consistent integrand function for desmearing with Lake's iterative method. The proposed approach is validated through experimental data on porous anodized aluminium oxide membranes, showcasing its applicability and benefits. The findings emphasize the importance of accurate desmearing for merging USANS and SANS data in the crossover q region, which is particularly crucial for complex scattering patterns.

A time-resolved investigation at multiple-length scales of the structure of liquid foam stabilized by albumins from pea

HypothesisThe structural details of foams made with pea albumins are affected by the pH of the initial solution and followed heat treatment. ExperimentsAn in situ, time-resolved investigation of foams prepared with pea albumins was conducted using small-angle neutron scattering (SANS) in combination with imaging and conductance measurements. Solutions were tested at pH three pH values (3, 4.5, and 8) before and after heating (90 °C for 1 and 5 min). FindingsThe characteristic structures present in the foam from the nano to the meso-scale differed during drainage depending on solution pH. Foams obtained at pH 3, had the largest bubble radius and thinnest plateau border, as well as the highest extent of liquid drainage. At pH 4.5, close to the isoelectric point of the proteins, foams displayed similar bubbles’ behavior to those at pH 8, but with the largest film thickness. In this case, the proteins were extensively aggregated. Heating of the solutions prior to foaming did not significantly affect the foam aging regardless of pH. The quantification of specific surface areas and film thickness over time without sample disruption shows to be a powerful approach to designing foam structures.

Wetting mechanism and alteration of nano-sized shale pores: Insights from contrast variation small angle neutron scattering

Wettability of tight shale is crucial for fluid flow and mass transport process in energy geosciences. However, understanding the interfacial chemistry and wetting mechanisms at sub-nano-pore scales remains a formidable challenge. In this study, the Contrast Variation technique of Small Angle Neutron Scattering (CV-SANS) is employed to investigate shale’s interfacial chemistry using reagents that possess a range of different polarities, including water, n-decane, toluene, and dimethyl methanamide. Through five different experimental strategies, we have demonstrated a successful modification of shale wettability, ranging from enhancement, weakening, to reversal. Delving into the mechanisms, we illustrated the crucial role of pre-existing liquid films in these changes, where the uniquely co-existing polar and non-polar functional groups in dimethyl methanamide acted as a conduit for interfacial chemistry adjustments. Furthermore, a solvent immersion led to matrix dilation as well as liberation of residual oil-occupied pores, resulting in altered pore size distributions, with hydrogen bonding playing a significant role in the polar groups. Interestingly, despite shale exhibiting a stronger affinity for oil over water, hydrophilic solvents induced more substantial dilation than lipophilic ones. Collectively, this work elucidates the dynamic change of interfacial chemistry via the configuration of polarity using chemical reagents, and the CV-SANS technique underscores its invaluable utilities in decoding the interfacial wettability traits in nanopore space of shale.

Precise fine-tuning of the defect degree in FeNi-TDC nanoarrays via fluorinated acetic acid for rapid urea-assisted hydrogen production in seawater

Precisely regulating the defect degree in metal-organic framework (MOF) crystals and exploring the structure-activity relationship is of great significance for urea-assisted seawater electrolysis to produce green hydrogen. Herein, a series of X-FeNi-TDC nanoarrays with various defects are successfully constructed through the competitive coordination of ligand 2,5-thiophenedicarboxylic acid (H2TDC) and fluorinated acetic acid modulators with different pKa and coordination ability of -COO. The 20D-FeNi-TDC nanosheets containing more unsaturated sites and moderate electron delocalization exhibit multifunctional activity with an overpotential of 194 mV in OER, 116 mV in HER and an applied voltage of 1.326 V in UOR at 10 mA cm-2. In addition, small angle X-ray scattering (SAXS), small angle neutron scattering (SANS), X-ray absorption near-edge structure (XANES) and density functional theory (DFT) calculation further elucidate alterations in pore structure and electronic arrangement of metal sites. This study provides insight into the mechanism by which modulators regulate defects in MOF-based electrocatalyst.

Effects of Heterogeneous Mixing of Imidazolium-Based Ionic Liquids with Alcohols on Complex Formation of Ni(II) Ion.

Understanding the complex formation of metal ions in room-temperature ionic liquids (ILs) is essential for the application of ILs in solvent extraction. Nevertheless, the research on metal complex formation in ILs lags behind other applications. The complex formation equilibria may be influenced by specific interactions among the metal ion, ligand molecule, and IL cation and anion. In the present investigation, the complex formation of Ni2+ with ethanol (EtOH) and methanol (MeOH) molecules in ILs, 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([CNmim][TFSA], where N represents the alkyl chain lengths of 2 and 8) was discussed in terms of the microscopic interactions among alcohol molecules, [CNmim]+ and [TFSA]-, and the mesoscopic mixing states of alcohols in [CNmim][TFSA], with N = 2-12. The microscopic interaction of alcohol molecules with the imidazolium ring H atoms in the ILs was evaluated by using ATR-IR and 1H and 13C NMR spectroscopies. The self-hydrogen bonding of alcohol molecules was clarified from the O-H stretching vibration of alcohol molecules. MeOH molecules can be more strongly hydrogen-bonded with themselves than EtOH molecules due to the less steric hindrance and the weaker dispersion force of MeOH with the IL cation's alkyl chain. In fact, small-angle neutron scattering (SANS) experiments revealed the more heterogeneous mixing of MeOH with the ILs by the self-hydrogen bonding among MeOH molecules than EtOH. The longer the IL cation's alkyl chain, the more the MeOH clusters significantly form. In contrast, the formation of EtOH clusters becomes weaker with elongating the alkyl chain. Ultraviolet (UV)-visible spectroscopic measurements on Ni2+-[CNmim][TFSA]-alcohol solutions with N = 2 and 8 revealed that di-, tetra-, and hexa-alcohol-Ni2+ complexes are formed in both the ILs. With N = 2, the stabilities of Ni2+-EtOH and Ni2+-MeOH complexes are comparable in the IL. However, with N = 8, the complexes are more stable in the EtOH solutions than in the MeOH solutions. This is because the less heterogeneous mixing of EtOH molecules with the IL results in the larger enthalpic contribution in the complex formation, as shown by the thermodynamic parameters estimated by the van't Hoff plots on the stability constants at several temperatures.

SANS investigation of fungal loosenins reveal substrate dependent impacts of protein 1 action on inter-fibril distance and packing order of cellulosic substrates.

Microbial expansin-related proteins include fungal loosenins, which have been previously shown to disrupt cellulose networks and enhance the enzymatic conversion of cellulosic substrates. Despite showing beneficial impacts to cellulose processing, detailed characterization of cellulosic materials after loosenin treatment is lacking. In this study, small-angle neutron scattering (SANS) was used to investigate the effects of three recombinantly produced loosenins that originate from Phanerochaete carnosa, PcaLOOL7, PcaLOOL9, and PcaLOOL12, on the organization of holocellulose preparations from Eucalyptus and Spruce wood samples. Whereas the SANS analysis of Spruce holocellulose revealed an increase in interfibril spacing of neighboring cellulose microfibrils following treatment with PcaLOOL12 and to a lesser extent PcaLOOL7, the analysis of Eucalyptus holocellulose revealed a reduction in packing number following treatment with PcaLOOL12 and to a lesser extent PcaLOOL9. Parallel SEC-SAXS characterization of PcaLOOL7, PcaLOOL9, and PcaLOOL12 indicated the proteins likely function as monomers; moreover, all appear to retain a flexible disordered N-terminus and folded C-terminal region. The comparatively high impact of PcaLOOL12 motivated its NMR structural characterization, revealing a double-psi b-barrel (DPBB) domain surrounded by three alpha-helices - the largest nestled against the DPBB core and the other two part of loops extending from the core. The SANS analysis of PcaLOOL action on holocellulose samples confirms their ability to disrupt cellulose fiber networks and suggests a progression from reducing microfibril packing to increasing interfibril distance. The most impactful PcaLOOL, PcaLOOL12, was previously observed to be the most highly expressed loosenin in P. carnosa. Its structural characterization herein reveals its stabilization through two disulfide linkages, and an extended N-terminal region distal to a negatively charged and surface accessible polysaccharide binding groove.

Probing the Distribution and Mobility of Aminopolymers after Multiple Sorption-Regeneration Cycles: Neutron Scattering Studies.

Solid-supported amines are effective CO2 adsorbents capable of capturing CO2 from flue gas streams (10-15 vol % CO2) and from ultradilute streams, such as ambient air (∼400 ppm CO2). Amine sorbents have demonstrated promising performance (e.g., high CO2 uptake and uptake rates) with stable characteristics under repeated, idealized thermal swing conditions, enabling multicycle application. Literature studies suggest that solid-supported amines such as PEI/SBA-15 generally exhibit slowly reducing CO2 uptake rates or capacities over repeated thermal swing capture-regeneration cycles under simulated DAC conditions. While there are experimental reports describing changes in supported amine mass, degradation of amine sites, and changes in support structures over cycling, there is limited knowledge about the structure and mobility of the amine domains in the support pores over extended use. Furthermore, little is known about the effects of H2O on cyclic applications of PEI/SBA-15 despite the inevitable presence of H2O in ambient air. Here, we present a series of neutron scattering studies exploring the distribution and mobility of PEI in mesoporous silica SBA-15 as a function of thermal cycling and cyclic conditions. Small-angle neutron scattering (SANS) and quasielastic neutron scattering (QENS) are used to study the amine and H2O distributions and amine mobility, respectively. Applying repeated thermal swings under dry conditions leads to the thorough removal of water from the sorbent, causing thinner and more rigid wall-coating PEI layers that eventually lead to slower CO2 uptake rates. On the other hand, wet cyclic conditions led to the sorption of atmospheric water at the wall-PEI interfaces. When PEI remains hydrated, the amine distribution (i.e., wall-coating PEI layer thickness) is retained over cycling, while lubrication effects of water yield improved PEI mobility, in turn leading to faster CO2 uptake rates.

Insight into the Competitive Adsorption Behavior of Polymer Chains in Silica Nanopores by Small-Angle Neutron Scattering

Insight into the Competitive Adsorption Behavior of Polymer Chains in Silica Nanopores by Small-Angle Neutron Scattering

Incorporation of short-chain alcohols into fluid bilayers and its effect on membrane dynamic properties as seen by neutron scattering

In this work, we investigate the effect of concentrated alcoholic solutions (up to 40%w) on extruded 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) liposomes using scattering techniques. Extrusion in alcoholic aqueous solutions (methanol, ethanol, or butanol) reduces liposome size, evidenced from the decrease in hydrodynamic radius (RH) obtained from dynamic light scattering. Short-chain alcohols such as ethanol and butanol soften the lipid membranes, as observed by the decrease of the unrelaxed bending modulus (κ̃ ) obtained by neutron spin-echo spectroscopy. Thus, softer membranes are easily ruptured during extrusion, leading to a reduction in vesicle radius corroborated by a reduction in both RH and radius of gyration as seen by dynamic and static light scattering. Moreover, model-free analysis of small-angle neutron scattering (SANS) curves suggests that solvent molecules become incorporated into the lipid membrane. Analysing deviations in the scattering invariant from values predicted by mass balance, we find that the volume fraction of liposomes increases, modifying the scattering length density of the assemblies. By quantifying these changes, we estimate that 12% to 18% of the liposome membrane is composed of solvent molecules (alcohol + water), depending on the type of alcohol and its concentration present in solution, with the exception of glycerol where next to no incorporation was observed. Finally, structural parameters obtained through light scattering and changes in contrast profiles calculated from analysis of the invariant were corroborated through modelling of the SANS curves. Modelling suggests that a reduction of bilayer thickness takes place for liposomes dispersed in ethanolic and butanolic solutions, but not in the presence of methanol or glycerol.

Colloidal Nafion in Liquid Media: Insight from SANS Analysis and Molecular Dynamics Simulations

Colloidal Nafion™ morphology in liquid media plays a critical role in determining the electrode performance of fuel cells and electrolyzers. In this presentation, we demonstrate that commonly reported, cylindrical morphologies of Nafion in liquid media are not ubiquitous among Nafion dispersions and assuming such may provide inaccurate information.1 Here we compare colloidal Nafion™ morphology in N-methyl-pyrrolidone (NMP) and water using small angle neutron scattering (SANS) and all atomistic molecular dynamics simulations (MD).2 Our SANS analyses using model-dependent and model-independent techniques combined with MD simulations demonstrated highly gel-like particles best describe Nafion particles in NMP, which is in stark contrast to the commonly assumed cylindrical morphology. In high dielectric constant dispersants such as water, the cylindrical morphology is a feasible choice to describe the scattering data, however, the particle radius is much lower than previous report (R = 10 Å). MD simulations support the SANS analysis and show that the sulfonic acid groups are fully dissociated and strongly solvated on the outer wall of the particle suggesting that the structure is driven by hydrophobic interactions.References Aldebert, B. Dreyfus, G. Gebel, N. Nakamura, M. Pineri, F. Volino, Macromolecules, 19, 2651-2653 (1986). Jeffrey M. Klein, Cynthia Welch, Sathish Ponnurangam, Atefeh Tarokh, Kunal Karan, Marilyn E. Hawley, Anna Sokolova, Sung-Dae Yim, Rex P. Hjelm, Yu Seung Kim, ACS Macro Letters, 12, 1648-1653 (2023).

Microstructural Analysis of Lithium-Ion Battery Cathode Carbon-Binder Domain across Processing Conditions

Improvement of lithium-ion battery (LIB) energy density and rate capability is necessary to increase adoption of electric vehicles (EVs) and curb transportation emissions. The cathode structure must support facile ion and electron transport, enabling rapid charging while maintaining near-theoretical capacity. Much investigation focuses on active material design for fast-charging cathodes, [1] but less is understood about the effect of electrode processing on carbon-binder domain (CBD) structure and its impact on rate capability. As conductive carbon facilitates electron transfer, slow Li+ diffusion through cathode micropores is rate-limiting and prevents full active material utilization at high charge rates. [2,3] However, efforts to improve Li+ diffusion, such as increasing porosity, introduce charge-transfer limitations. [4] Thus, cathode processing conditions and resulting microstructure must be carefully designed to optimize for both electronic and ionic conductivity. For example, an increase in coating shear rate and decrease in slurry solid content improves long-range electronic pathways [5,6] and calendaring strengthens active material-carbon contacts to reduce charge-transfer resistance. [2] However, the impact of processing variations on ionic transport pathways, which can be described by CBD porosity and tortuosity, is not well understood. Further, because the CBD is traditionally characterized as a single phase, the distinct influences of insulating binder and conductive carbon distributions on structure and performance are poorly defined.In this talk, I will discuss how electrode coating conditions impact pathways available to Li+ and electrons within the CBD with the goal of identifying optimal microstructures for efficient transport. We fabricate cathodes with varying solid content, coating shear rate, and degree of calendaring to explore disparate CBD microstructures. We use electrochemical impedance spectroscopy (EIS) with a symmetric cell & blocking electrolyte to determine cathode resistivity and tortuosity and plasma focused ion beam scanning electron microscopy (PFIB-SEM) to examine CBD morphology over a representative cathode volume (~80 x 80 x 50 µm3). We then use small-angle neutron scattering (SANS) with solvent contrast variation to distinguish between binder and carbon distributions and determine the surface area of each component within the CBD. Relationships between processing conditions, structural variations, and rate capability will be discussed, informing the design of the CBD for facile transport and improved fast charging performance. Further, reducing ionic transport limitations through intentional design of LIB cathodes will enable thicker electrodes to increase cell energy density.

Pegylated surfactants based on fatty acids: 12-hydroxystearic acid versus stearic acid

We describe the aqueous behavior of short Polyethylene glycol (PEG) chains of Mw 4 kDa that are either mono-functionalized or di-functionalized by 12-hydroxy stearic acid (HSA), and stearic acid (SA), respectively. The end capping of the chains by the fatty acids is achieved by Steglich esterification, after a step of protection of the 12-OH functional group in the case of HSA. Small Angle Neutron Scattering (SANS) shows that mono-functionalized chains with both SA or HSA sticky ends self-assemble in star micelles in aqueous solution, and interact through repulsive steric interactions. The di-functionalized telechelic chains self-assemble in flower micelles that interact through interactions that are attractive on average due to the formation of bridges by chains that share their both ends in two different micelles. Solutions of telechelic chains undergo a phase separation between a dilute solution of micelles and a dense hexagonal crystalline network of flower micelles above a given polymer concentration threshold. This threshold is lower for SA-PEG-SA than for HSA-PEG-HSA. We postulate that this difference of behavior arises from the formation of hydrogen bonds between the OH groups at the C12 of the alkyl chain in case of HSA that increase the stability of the hydrophobic core of the micelles.

Underlying Roles of Polyol Additives in Promoting CO2 Capture in PEI/Silica Adsorbents.

Solid-supported amines having low molecular weight branched poly(ethylenimine) (PEI) physically impregnated into porous solid supports are promising adsorbents for CO2 capture. Co-impregnating short-chain poly(ethylene glycol) (PEG) together with PEI alters the performance of the adsorbent, delivering improved amine efficiency (AE, mol CO2 sorbed/mol N) and faster CO2 uptake rates. To uncover the physical basis for this improved gas capture performance, we probe the distribution and mobility of the polymers in the pores via small angle neutron scattering (SANS), solid-state NMR, and molecular dynamic (MD) simulation studies. SANS and MD simulations reveal that PEG displaces wall-bound PEI, making amines more accessible for CO2 sorption. Solid-state NMR and MD simulation suggest intercalation of PEG into PEI domains, separating PEI domains and reducing amine-amine interactions, providing potential PEG-rich and amine-poor interfacial domains that bind CO2 weakly via physisorption while providing facile pathways for CO2 diffusion. Contrary to a prior literature hypothesis, no evidence is obtained for PEG facilitating PEI mobility in solid supports. Instead, the data suggest that PEG chains coordinate to PEI, forming larger bodies with reduced mobility compared to PEI alone. We also demonstrate promising CO2 uptake and desorption kinetics at varied temperatures, facilitated by favorable amine distribution.

Study of readout system for 3He linear position sensitive detectors

This study introduces a readout system for 3He linear position-sensitive detectors (LPSDs), tailored for the Small Angle Neutron Scattering (SANS) spectrometer of the Compact Pulsed Hadron Source (CPHS) at Tsinghua University. Central to this system is the employment of a trapezoidal filter as the primary signal shaper, selected for its enhanced noise filtering capabilities and efficacy in mitigating ballistic deficit. Additionally, the integration of a digital CR filter aims to counteract baseline drift within trigger signals. This innovative architecture underwent validation via computer programs using experimental data, demonstrating superior performance in spatial resolution compared to conventional Gaussian filter-based approaches. Meanwhile, the improvement in spatial resolution comes with a narrower pulse width, promising a higher throughput at high count rates. When applied to a 16-tube detector module, the system achieved an average position resolution of 3.63 mm (FWHM) at the central region and 4.03 mm at the end regions. Furthermore, with a pusle width of 0.6 μs, the 96-tube detector array is promised to sustain a count rate over 1 Mcps.

In-situ SANS study on spatial evolution of coal nanoporosity during pyrolysis at elevated temperatures

The nanopore evolution in coal during pyrolysis is vital for optimizing heat and mass transfer in coal conversion processes. Therefore, small-angle neutron scattering (SANS) was utilized to examine the in-situ changes in the nanopore structures of two subbituminous Chinese coal samples during pyrolysis. The nanopore structures were examined in terms of average pore size, pore volume distribution, fractal dimension by SANS at elevated temperatures. Throughout the pyrolysis process, a consistent enlargement of the average size of nanoscale pores was noted as temperatures escalated, with an expansion ranging from 5.3 to 8.2 nm. Particularly during the devolatilization phase (300–500 °C), there was a marked surge in the volume of large pores, exhibiting a growth rate of about 88.1–150.5%. High-temperature (600–800 °C) conditions facilitated the formation of new and smaller pores. While the surface roughness of nanopores experienced a slight reduction throughout the pyrolysis, the directional growth of the pores maintained an isotropic distribution.

Morphology evolution of lipid nanoparticle discovered by small angle neutron scattering

The structure of mRNA lipid nanoparticles (LNPs) is still under debate, with different studies presenting varying morphological characteristics, significantly hindering their biomedical potential. A typical formulation process of mRNA LNPs involves three steps: initial rapid mixing of lipids in an ethanol phase and mRNA in an acidic aqueous phase, followed by the swift removal of ethanol, and finally adjusting the solution to a neutral environment. In this study, we utilize Small Angle Neutron Scattering (SANS) with contrast matching to reveal the kinetic pathway-dependent of mRNA LNPs morphology. We find that the formulation process of the Moderna COVID-19 vaccine is controlled by a competition between aggregation and microphase separation, dictating the diverse morphologies observed in mRNA LNPs. The first step leads to the formation of polydisperse spherical droplets with an average diameter of 42±6.0 nm in an acidic ethanol aqueous solution. Ethanol removal initiates both aggregation and internal microphase separation, resulting in a polydisperse core-shell structure with an average diameter of 48±3.7 nm. Heptadecan-9-yl 8-((2-hydroxyethyl) (6-oxo-6-(undecyloxy) hexyl) amino) octanoate (SM-102) binds to mRNA via electrostatic interaction to form a reverse-wormlike micelle structure inside. The 1,2-Distearoyl-sn‑glycero-3-phosphocholine (DSPC) and PEG-lipid are just in the shell and cholesterol acting as a filler throughout the core-shell structure. Upon transitioning to a neutral environment, SM-102 loses its charge and neither the periphery nor the reverse-wormlike micelle can maintain their stabilities, leading to further aggregation and microphase separation. The average diameter of core-shell structure turns to be 66±5.2 nm. In the actual formulation process of the Moderna COVID-19 vaccine, steps 2 and 3 occur simultaneously, and the competition between aggregation and microphase separation determines the final morphology. These findings offer crucial insights into optimizing the morphology of mRNA LNPs, thereby facilitating advancements in vaccine development and mRNA vaccine delivery technologies.

The Influence of SC-CO2 on the Nanopore Structures of Different Types of Shales Based on Small-Angle Neutron Scattering and Multifractal Methods

The Influence of SC-CO₂ on the Nanopore Structures of Different Types of Shales Based on Small-Angle Neutron Scattering and Multifractal Methods

New processing routes for Zr-based ODS ferritic steels

In this work, Zr addition is proposed to refine the nanoparticle dispersion in an ODS RAF steel of composition Fe-14Cr-2W-0.3Zr-0.24Y (wt.%). Three batches of material are obtained using pre-alloyed atomized powder, where yttrium is directly introduced in the melt, and manufactured through three different processing routes. First route is based on the newly developed STARS route that aims to avoid subsequent mechanical alloying. The second route explores the impact of mechanical alloying in pre-oxidized powders. The third route uses mechanically alloyed powders without the pre-oxidation process. The ODS-powders were individually consolidated by hot isostatic pressing and later hot rolled. The obtained materials were characterized by small-angle neutron scattering (SANS) and X-ray absorption spectroscopy (XAS) techniques. SANS and XAS analysis point out the absence of oxide nanoparticles in the material based on the STAR route. SANS analysis confirms that the mechanically alloyed materials do exhibit the presence of nanoparticles. These are identified as Zr-O-rich nanoprecipitates by XAS and the calculated A-ratio by SANS is linked with the phase Y2Zr2O7. Their radii are in the range of 3–3.6 nm. XAS results show that mechanical alloying minimizes the initial differences regarding the oxidation state between the ODS powders with and without pre-oxidation.

Molecular Insights into the Conformational and Binding Behaviors of Human Serum Albumin Induced by Surface-Active Ionic Liquids.

Extensive research has been carried out to investigate the stability and function of human serum albumin (HSA) when exposed to surface-active ionic liquids (SAILs) with different head groups (imidazolium, morpholinium, and pyridinium) and alkyl chain lengths (ranging from decyl to tetradecyl). Analysis of the protein fluorescence spectra indicates noticeable changes in the secondary structure of HSA with varying concentrations of all SAILs tested. Helicity calculations based on the Fourier transform infrared (FTIR) data show that HSA becomes more organized at the micellar concentration of SAILs, leading to an increased protein activity at this level. Small-angle neutron scattering (SANS) data confirm the formation of a bead-necklace structure between the SAILs and HSA. Atomistic molecular dynamics (MD) simulation results identify several hotspots on the protein surface for interaction with SAIL, which results in the modulation of protein conformational fluctuation and stability. Furthermore, fluorescence resonance energy transfer (FRET) experiments with the intramolecular charge transfer (ICT) probe trans-ethyl p-(dimethylamino) cinnamate (EDAC) demonstrate that higher alkyl chain lengths and SAIL concentrations result in a significantly increased energy transfer efficiency. The findings of this study provide a detailed molecular-level understanding of how the protein structure and function are affected by the presence of SAILs, with potential implications for a wide range of applications involving protein-SAIL composite systems.