Small Amount Of Dimer Research Articles

Dissection of the amyloid formation pathway in AL amyloidosis

In antibody light chain (AL) amyloidosis, overproduced light chain (LC) fragments accumulate as fibrils in organs and tissues of patients. In vitro, AL fibril formation is a slow process, characterized by a pronounced lag phase. The events occurring during this lag phase are largely unknown. We have dissected the lag phase of a patient-derived LC truncation and identified structural transitions that precede fibril formation. The process starts with partial unfolding of the VL domain and the formation of small amounts of dimers. This is a prerequisite for the formation of an ensemble of oligomers, which are the precursors of fibrils. During oligomerization, the hydrophobic core of the LC domain rearranges which leads to changes in solvent accessibility and rigidity. Structural transitions from an anti-parallel to a parallel β-sheet secondary structure occur in the oligomers prior to amyloid formation. Together, our results reveal a rate-limiting multi-step mechanism of structural transitions prior to fibril formation in AL amyloidosis, which offers, in the long run, opportunities for therapeutic intervention.

Study of the electrochemical oxidation of 4,6-dimethyldibenzothiophene on a BDD electrode employing different techniques

• Study of the oxidation steps of 4,6-DMDBT by different techniques using a BDD anode. • 4,6-DMDBT was removed after 60 min of electrolysis at E an = 1.50 V. • Selective oxidation of 4,6-DMDBT to sulfoxide or sulfone. • The conversion depended on concentration, applied potential, and water content. • A small amount of dimers was formed during the electrochemical oxidation. The electrochemical oxidation of 4,6-dimethyldibenzothiophene (4,6-DMDBT) at low concentrations on a BDD anode was investigated in a monophasic acetonitrile (93.5% v/v)–water (6.5% v/v, 0.01 M LiClO 4 ) solution. Two oxidation steps related to the sequential formation of sulfoxide and sulfone derivatives were identified. Kinetic parameters such as the electron transfer coefficient α, the number of electrons n α involved in the rate-determining step, the total number of electrons n , the reaction rate constant k 0 and the diffusion coefficient D of 4,6-DMDBT for the first transformation were determined by cyclic voltammetry, differential pulse voltammetry (DPV), square wave voltammetry and bulk electrolysis under potentiostatic conditions. The process was bielectronic with α = 0.57, n α = 1, k 0 = 7.46 × 10 −6 cm s −1 and D = 2.30 × 10 −6 cm 2 s −1 . DPV was the most sensitive electroanalytical technique. Using 27 mg L −1 of 4,6-DMTDB, DPV allowed determining a conversion of 91% to sulfoxide after 60 min of electrolysis in a BDD/BDD cell at an anodic potential of 1.50 V, with an apparent rate constant of 0.034 min −1 . The electrochemical characterization was corroborated via gas chromatography–mass spectrometry and ultra-high performance liquid chromatography coupled to electrospray ionization and quadrupole time-of-flight mass spectrometry, confirming the formation of the sulfoxide in the first step and the sulfone in the second one as main products, alongside a minor proportion of dimers.

Biochemical and crystallographic studies of monomeric and dimeric bovine cytochrome c oxidase.

Cytochrome c oxidase (CcO), a terminal oxidase in the respiratory chain, catalyzes the reduction of O2 to water coupled with the proton pump across the membrane. Mitochondrial CcO exists in monomeric and dimeric forms, and as a monomer as part of the respiratory supercomplex, although the enzymatic reaction proceeds in the CcO monomer. Recent biochemical and crystallographic studies of monomeric and dimeric CcOs have revealed functional and structural differences among them. In solubilized mitochondrial membrane, the monomeric form is dominant, and a small amount of dimer is observed. The activity of the monomeric CcO is higher than that of the dimer, suggesting that the monomer is the active form. In the structure of monomeric CcO, a hydrogen bond network of water molecules is formed at the entrance of the proton transfer K-pathway, and in dimeric CcO, this network is altered by a cholate molecule binding between monomers. The specific binding of the cholate molecule at the dimer interface suggests that the binding of physiological ligands similar in size or shape to cholate could also trigger dimer formation as a physiological standby form. Because the dimer interface also contains weak interactions of nonspecifically bound lipid molecules, hydrophobic interactions between the transmembrane helices, and a Met–Met interaction between the extramembrane regions, these interactions could support the stabilization of the standby form. Structural analyses also suggest that hydrophobic interactions of cardiolipins bound to the trans­membrane surface of CcO are involved in forming the supercomplex.

Functional Roles of Metabolic Intermediates in Regulating the Human Mitochondrial NAD(P)+-Dependent Malic Enzyme

Human mitochondrial NAD(P)+-dependent malic enzyme (m-NAD(P)-ME) has a dimer of dimers quaternary structure with two independent allosteric sites in each monomer. Here, we reveal the different effects of nucleotide ligands on the quaternary structure regulation and functional role of the human m-NAD(P)-ME exosite. In this study, size distribution analysis was utilized to investigate the monomer-dimer-tetramer equilibrium of m-NAD(P)-ME in the presence of different ligands, and the monomer-dimer (Kd,12) and dimer-tetramer (Kd,24) dissociation constants were determined with these ligands. With NAD+, the enzyme formed more tetramers, and its Kd,24 (0.06 µM) was 6-fold lower than the apoenzyme Kd,24 (0.34 µM). When ATP was present, the enzyme displayed more dimers, and its Kd,24 (2.74 µM) was 8-fold higher than the apoenzyme. Similar to the apoenzyme, the ADP-bound enzyme was present as a tetramer with a small amount of dimers and monomers. These results indicate that NAD+ promotes association of the dimeric enzyme into tetramers, whereas ATP stimulates dissociation of the tetrameric enzyme into dimers, and ADP has little effect on the tetrameric stability of the enzyme. A series of exosite mutants were created using site-directed mutagenesis. Size distribution analysis and kinetic studies of these mutants with NAD+ or ATP indicated that Arg197, Asn482 and Arg556 are essential for the ATP binding and ATP-induced dissociation of human m-NAD(P)-ME. In summary, the present results demonstrate that nucleotides perform discrete functions regulating the quaternary structure and catalysis of m-NAD(P)-ME. Such regulation by the binding of different nucleotides may be critically associated with the physiological concentrations of these ligands.

A capillary zone electrophoresis method to investigate the oligomerization of the human Islet Amyloid Polypeptide involved in Type 2 Diabetes

Type 2 diabetes is characterized by the aggregation of human Islet Amyloid Polypeptide (hIAPP) from monomer to large and insoluble fibrils. According to several recent studies, small soluble oligomers are now considered as potential toxic species. No monitoring tool has been to date reported to mimic in vitro the oligomerization process of hIAPP over time, although this would allow selecting candidate compounds that slow down or stop this pathological process. Considering the poor stability of those species and the necessity to monitor in real time, a compatible with the monitoring of hIAPP oligomerization CE method coupled to UV detection was developed. Three groups of hIAPP oligomers/monomers formed during this process could be separated. A polybrene coating was used to avoid adsorption of hIAPP onto capillary walls. Peaks identification was performed using a combination of CE-MS, filtrations and SDS-PAGE. They revealed that one peak is composed of monomer with a very small amount of dimer and trimer, whereas the two others are composed of bigger species higher than 100 kDa. We demonstrated that this real time oligomerization process started from the very initial step, with hIAPP principally as a monomer, until the formation of very big oligomers. This method was shown to be repeatable with RSDs on electrophoretic mobilities and relative peak areas less than 1.6 and 5.8% respectively for the monomer peak. Its application to study the anti-aggregation properties of resveratrol showed that this compound saved more than 30% of the monomeric hIAPP form whereas it almost disappeared without. The method opens new perspectives for the screening of potential drugs for type 2 diabetes.

The Vesicle Priming Factor CAPS Functions as a Homodimer via C2 Domain Interactions to Promote Regulated Vesicle Exocytosis

Neurotransmitters and peptide hormones are secreted by regulated vesicle exocytosis. CAPS (also known as CADPS) is a 145-kDa cytosolic and peripheral membrane protein required for vesicle docking and priming steps that precede Ca2+-triggered vesicle exocytosis. CAPS binds phosphatidylinositol 4,5-bisphosphate (PI(4,5)P2) and SNARE proteins and is proposed to promote SNARE protein complex assembly for vesicle docking and priming. We characterized purified soluble CAPS as mainly monomer in equilibrium with small amounts of dimer. However, the active form of CAPS bound to PC12 cell membranes or to liposomes containing PI(4,5)P2 and Q-SNARE proteins was mainly dimer. CAPS dimer formation required its C2 domain based on mutation or deletion studies. Moreover, C2 domain mutations or deletions resulted in a loss of CAPS function in regulated vesicle exocytosis, indicating that dimerization is essential for CAPS function. Comparison of the CAPS C2 domain to a structurally defined Munc13-1 C2A domain dimer revealed conserved residues involved in CAPS dimerization. We conclude that CAPS functions as a C2 domain-mediated dimer in regulated vesicle exocytosis. The unique tandem C2-PH domain of CAPS may serve as a PI(4,5)P2-triggered switch for dimerization. CAPS dimerization may be coupled to oligomeric SNARE complex assembly for vesicle docking and priming.

Molecular Assembly of Wheat Gliadins into Nanostructures: A Small-Angle X-ray Scattering Study of Gliadins in Distilled Water over a Wide Concentration Range

Gliadin, one of the major proteins together with glutenin composing gluten, affects the physical properties of wheat flour dough. In this study, nanoscale structures of hydrated gliadins extracted into distilled water were investigated primarily by small-angle X-ray scattering (SAXS) over a wide range of concentrations. Gliadins are soluble in distilled water below 10 wt %. Guinier analyses of SAXS profiles indicate that gliadins are present as monomers together with small amounts of dimers and oligomers in a very dilute solution. The SAXS profiles also indicate that interparticle interference appears above 0.5 wt % because of electrostatic repulsion among gliadin assemblies. Above 15 wt %, gliadins form gel-like hydrated solids. At greater concentrations, a steep upturn appears in the low-q region owing to the formation of large aggregates, and a broad shoulder appears in the middle-q region showing density fluctuation inside. This study demonstrates that SAXS can effectively disclose the nanostructure of hydrated gliadin assemblies.

New structural forms of a mycobacterial adenylyl cyclase Rv1625c.

Rv1625c is one of 16 adenylyl cyclases encoded in the genome of Mycobacterium tuberculosis. In solution Rv1625c exists predominantly as a monomer, with a small amount of dimer. It has been shown previously that the monomer is active and the dimeric fraction is inactive. Both fractions of wild-type Rv1625c crystallized as head-to-head inactive domain-swapped dimers as opposed to the head-to-tail dimer seen in other functional adenylyl cyclases. About half of the molecule is involved in extensive domain swapping. The strain created by a serine residue located on a hinge loop and the crystallization condition might have led to this unusual domain swapping. The inactivity of the dimeric form of Rv1625c could be explained by the absence of the required catalytic site in the swapped dimer. A single mutant of the enzyme was also generated by changing a phenylalanine predicted to occur at the functional dimer interface to an arginine. This single mutant exists as a dimer in solution but crystallized as a monomer. Analysis of the structure showed that a salt bridge formed between a glutamate residue in the N-terminal segment and the mutated arginine residue hinders dimer formation by pulling the N-terminal region towards the dimer interface. Both structures reported here show a change in the dimerization-arm region which is involved in formation of the functional dimer. It is concluded that the dimerization arm along with other structural elements such as the N-terminal region and certain loops are vital for determining the oligomeric nature of the enzyme, which in turn dictates its activity.

Determination of Soluble Immunoglobulin G in Bovine Colostrum Products by Protein G Affinity Chromatography–Turbidity Correction and Method Validation

Immunoglobulin-containing food products and nutraceuticals such as bovine colostrum are of interest to consumers as they may provide health benefits. Commercial scale colostrum products are valued for their immunoglobulin G (IgG) content and therefore require accurate analysis. One of the most commonly used methods for determining total soluble IgG in colostrum products is based on affinity chromatography using a Protein G column and UV detection. This paper documents improvements to the accuracy of the Protein G analysis of IgG in colostrum products, especially those containing aggregated forms of IgG. Capillary electrophoresis-sodium dodecyl sulfate (CE-SDS) analysis confirmed that aggregated IgG measured by Protein G does not contain significant amounts of casein or other milk proteins. Size exclusion chromatography identified the content of soluble IgG as mainly monomeric IgG and aggregated material MW > 450 kDa with small amounts of dimer and trimer. The turbidity of the eluting IgG, mainly associated with aggregated IgG, had a significant effect on the quantitative results. Practical techniques were developed to correct affinity LC data for turbidity on an accurate, consistent, and efficient basis. The method was validated in two laboratories using a variety of colostrum powders. Precision for IgG was 2-3% (RSD(r)) and 3-12% (RSD(R)). Recovery was 100.2 ± 2.4% (mean ± RSD, n = 10). Greater amounts of aggregated IgG were solubilized by a higher solution:sample ratio and extended times of mixing or sonication, especially for freeze-dried material. It is concluded that the method without acid precipitation and with turbidity correction provides accurate, precise, and robust data for total soluble IgG and is suitable for product specification and quality control of colostrum products.

Expression and Characterization of Full-length Human Huntingtin, an Elongated HEAT Repeat Protein

Huntington disease is an inherited neurodegenerative disorder that is caused by expanded CAG trinucleotide repeats, resulting in a polyglutamine stretch of >37 on the N terminus of the protein huntingtin (htt). htt is a large (347 kDa), ubiquitously expressed protein. The precise functions of htt are not clear, but its importance is underscored by the embryonic lethal phenotype in htt knock-out mice. Despite the fact that the htt gene was cloned 13 years ago, little is known about the properties of the full-length protein. Here we report the expression and preliminary characterization of recombinant full-length wild-type human htt. Our results support a model of htt composed entirely of HEAT repeats that stack to form an elongated superhelix.

Regulation of the Monomer-Dimer Equilibrium in Inducible Nitric-oxide Synthase by Nitric Oxide

The oxygenase domain of inducible nitric-oxide synthase exists as a functional tight homodimer in the presence of the substrate L-arginine and the cofactor tetrahydrobiopterin (H4B). In the absence of H4B, the enzyme is a mixture of monomer and loose dimer. We show that exposure of H4B-free enzyme to NO induces dissociation of the loose dimer into monomers in a reaction that follows single exponential decay kinetics with a lifetime of approximately 300 min. It is followed by a faster autoreduction reaction of the heme iron with a lifetime of approximately 30 min and the concurrent breakage of the proximal iron-thiolate bond, forming a five-coordinate NO-bound ferrous species. Mass spectrometry revealed that the NO-induced monomerization is associated with intramolecular disulfide bond formation between Cys104 and Cys109, located in the zinc-binding motif. The regulatory effect of NO as a dimer inhibitor is discussed in the context of the structure/function relationships of this enzyme.

Positive co-operative activity and dimerization of the isolated ABC ATPase domain of HlyB from Escherichia coli

The ATPase activity of the ABC (ATP-binding cassette) ATPase domain of the HlyB (haemolysin B) transporter is required for secretion of Escherichia coli haemolysin via the type I pathway. Although ABC transporters are generally presumed to function as dimers, the precise role of dimerization remains unclear. In the present study, we have analysed the HlyB ABC domain, purified separately from the membrane domain, with respect to its activity and capacity to form physically detectable dimers. The ATPase activity of the isolated ABC domain clearly demonstrated positive co-operativity, with a Hill coefficient of 1.7. Furthermore, the activity is (reversibly) inhibited by salt concentrations in the physiological range accompanied by proportionately decreased binding of 8-azido-ATP. Inhibition of activity with increasing salt concentration resulted in a change in flexibility as detected by intrinsic tryptophan fluorescence. Finally, ATPase activity was sensitive towards orthovanadate, with an IC50 of 16 microM, consistent with the presence of transient dimers during ATP hydrolysis. Nevertheless, over a wide range of protein or of NaCl or KCl concentrations, the ABC ATPase was only detected as a monomer, as measured by ultracentrifugation or gel filtration. In contrast, in the absence of salt, the sedimentation velocity determined by analytical ultracentrifugation suggested a rapid equilibrium between monomers and dimers. Small amounts of dimers, but apparently only when stabilized by 8-azido-ATP, were also detected by gel filtration, even in the presence of salt. These data are consistent with the fact that monomers can interact at least transiently and are the important species during ATP hydrolysis.

Epitaxial growth with impurity dimer deposition

We investigate an influence of impurity dimers on the profile of monomer and island densities and the dynamic scaling of island size distributions when small amount of dimers are deposited with the flux of monomers in epitaxial growth. The rate equations are solved numerically using the fourth-order Runge–Kutta algorithm. The computer simulations are also carried out for various dimer rates and for various growth models. We find that the density profile of islands displays five distinct regions, i.e., the deposition-dominated region I (DDR-I), the competing region in which dimer-deposition competes with nucleation, the intermediate region, the DDR-II, and finally the coalescence region. Monte Carlo data exhibit fairly good agreements with the rate equation predictions of the point–island model up to DDR-II. With negligibly small rate of dimers, the dynamic scaling function of the island size distributions appears to vary considerably, implying that impurity dimers alter significantly the growth mechanism.

Mass spectrometric study of the Escherichia coli repressor proteins, Ic1R and Gc1R, and their complexes with DNA.

In Escherichia coli, the IclR protein regulates both the aceBAK operon and its own synthesis. Database homology searches have identified many IclR-like proteins, now known as the IclR family, which can be identified by a conserved C-terminal region. We have cloned and purified one of these proteins, which we have named GclR (glyoxylate carboligase repressor). Although purification is straightforward, both the IclR and GclR proteins are difficult to manipulate, requiring high salt (up to 0.6 M KCl) for solubility. With the advent of nanospray ionization, we could transfer the proteins into much higher concentrations of volatile buffer than had been practical with ordinary electrospray. In 0.5 M ammonium bicarbonate buffer, both proteins were stable as tetramers, with a small amount of dimer. In a separate experiment, we found that IclR protein selected from a random pool a sequence which matched exactly that of the presumed binding region of the GclR protein, although IclR does not regulate the gcl gene. We designed a 29 bp synthetic DNA to which IclR and GclR bind, and with which we were able to form noncovalent DNA-protein complexes for further mass spectrometry analysis. These complexes were far more stable than the proteins alone, and we have evidence of a stoichiometry which has not been described previously with (protein monomer : dsDNA) = (4 : 1).

Photophysical and Photochemical Processes of 2-Methyl, 2-Ethyl, and 2-tert-Butylanthracenes on Silica Gel. A Substituent Effect Study

The photophysics and photochemistry of 2-methylanthracene (2MA), 2-ethylanthracene (2EA), and 2-tert-butylanthracene (2TBA) adsorbed on silica was studied at a silica/air interface to determine the substituent effect on the above processes. In contrast to anthracene (AN), which forms ground state stable pairs at surface coverages as low as 1% of a monolayer, 2MA, 2EA, and 2TBA show no evidence of any ground state pairing even at high surface coverages. Diffuse reflectance and fluorescence data indicate that 2MA, 2EA, and 2TBA crystallize on the surface at higher surface coverages. Photolysis of 2MA, 2EA, and 2TBA at a silica/air interface proceeds more efficiently than photolysis of AN to produce the corresponding 9,10-endoperoxides formed by the addition of singlet molecular oxygen (type II) to the ground state molecules. Thermally unstable endoperoxides slowly decompose on silica surface to give the corresponding 9,10-quinones and other hydroxylated products of 2MA, 2EA, and 2TBA. Although photolyzed AN/silica samples show a significant amount of dimer formation at low surface coverages, no evidence of any dimer is observed in photolyzed samples of 2MA, 2EA, and 2TBA at low surface coverages. Small amount of dimers (isomeric), however, are observed in the photolyzed samples of 2MA, 2EA, and 2TBA at higher surface coverages suggesting that the crystal forms of these molecules may be involved in the dimerization process. The photolysis rate decreases as the surface coverage is increased. This behavior can be attributed to the involvement of crystals (formed at higher surface coverage) which act as a light sink to absorb the incident light without producing any net chemistry. The photolysis rate decreases by an order of magnitude in the presence of ≤1 monolayer of physisorbed water. Time-resolved transient studies of excited triplet states of 2MA, 2EA, and 2TBA have revealed that triplet lifetimes are shortened on wet silica. Furthermore, the efficiency of singlet molecular oxygen formation drops significantly on wet silica. These results suggest that the decrease in photolysis rate is due to lowering of the singlet oxygen quantum yield in the presence of physisorbed water.

On the reduction of tertiary radicals by samarium diiodide (SmI2)

Reduction of o-iodophenyl 3-methylbut-2-enyl ether with samarium diiodide generates mixtures of 3-isopropyl-2,3-dihydrobenzofuran and 3-(2-propenyl)-2,3-dihydrobenzofuran along with a small amount of dimer. If a source of deuterium is present during the reduction, then the 3-isopropyl product predominates and this product is labeled with one deuterium. However, attempts to quench the putative tertiary organosamarium reagent by adding a deuterium source after the reduction were not very successful at room temperature. But at 0°C, the organosamarium reagent was generated (at least to the extent of about 50%, as measured by deuterium quenching), and its decomposition was followed over time by a series of quenching experiments. The results suggest that tertiary radicals are reduced to a significant extent by SmI2 to form an anionic (presumably alkylsamarium) species. This species is thermally unstable and decomposes to the corresponding reduced and eliminated products. The reduced product is consistently formed in slight excess over the eliminated one, and the mechanism of formation of these products is not yet clear.Key words: samarium diiodide, SmI2, reduction, alkyl samarium.

Electrochemical reduction of dichlorodifluoromethane at a Nafion® solid polymer electrolyte cell

The electrochemical reduction of dichlorodifluoromethane (CFC-12) at Ag, Pd, Cu and Au electrodes (which were deposited on Nafion® 117 (H + form) membranes, by reduction with NaBH 4 (10% w/v) solution) was studied. The products of the reduction were CHClF 2 , CH 2 F 2 , CH 3 F and CH 4 , as well as small amounts of dimers, CF 2 CF 2 and CHF 2 CHF 2 . The silver electrode gave the highest current efficiency (CE) and reduction rate. The rate of reduction at the silver electrode was almost 10–160 times higher than that measured for the other electrodes, under the same conditions. Selectivity of CH 4 production increased for all metals with increasing negative potential, except for CHClF 2 where it decreased. For the other products, a maximum in the selectivity–potential curve appeared. This fact led us to the conclusion that the reduction proceeds by the following mechanism: CCl 2 F 2 →CHClF 2 →CH 2 F 2 →CH 3 F→CH 4 . The rate of reduction of CFC-12 and the product distribution also depend on the pH of the solution, which is in contact with the membrane. The rate of reduction at the silver electrode was about 4000 times higher at pH 14 than at pH 1. The cation of the supporting electrolyte was also important: the rate of reduction was lowered in the order K + >Na + >Li + , and this was attributed to the size of the cations, which influenced the structure of the double layer.

Microencapsulation of human growth hormone within biodegradable polyester microspheres: Protein aggregation stability and incomplete release mechanism

Recombinant human growth hormone (rhGH) was encapsulated within poly(d,l-lactic-co-glycolic acid) microspheres by a double emulsion solvent evaporation method. A mixture of methylene chloride and ethyl acetate in varying volume ratios was used for the microsphere preparation. Protein release profiles from three different microsphere formulations demonstrated initial burst effects ranging from 28.2% to 54.7% after a 1-day incubation and exhibited no further significant releases up to 19 days. This was because the encapsulated rhGH with the microspheres was largely aggregated in a noncovalent fashion during the formulation. Nonaggregated water soluble rhGH species within the microspheres are likely to be responsible for the rapid release upon incubation. The initially released rhGH in the incubation medium, however, was composed of mostly monomer species with a small amount of dimer as probed by size-exclusion chromatography. Circular dichroism spectra of the initially released rhGH in the medium revealed that the conformation of the released rhGH was correctly folded relative to that of native rhGH, with little variation in α-helix contents depending on the formulations. The “nonrelease” mechanism after the initial burst release was attributed to nonspontaneously dissociable noncovalent protein aggregation and surface adsorption of rhGH present within the microspheres. © 1999 John Wiley & Sons, Inc. Biotechnol Bioeng 65: 659–667, 1999.

Microencapsulation of human growth hormone within biodegradable polyester microspheres: protein aggregation stability and incomplete release mechanism.

Recombinant human growth hormone (rhGH) was encapsulated within poly(D,L-lactic-co-glycolic acid) microspheres by a double emulsion solvent evaporation method. A mixture of methylene chloride and ethyl acetate in varying volume ratios was used for the microsphere preparation. Protein release profiles from three different microsphere formulations demonstrated initial burst effects ranging from 28.2% to 54.7% after a 1-day incubation and exhibited no further significant releases up to 19 days. This was because the encapsulated rhGH with the microspheres was largely aggregated in a noncovalent fashion during the formulation. Nonaggregated water soluble rhGH species within the microspheres are likely to be responsible for the rapid release upon incubation. The initially released rhGH in the incubation medium, however, was composed of mostly monomer species with a small amount of dimer as probed by size-exclusion chromatography. Circular dichroism spectra of the initially released rhGH in the medium revealed that the conformation of the released rhGH was correctly folded relative to that of native rhGH, with little variation in alpha-helix contents depending on the formulations. The "nonrelease" mechanism after the initial burst release was attributed to nonspontaneously dissociable noncovalent protein aggregation and surface adsorption of rhGH present within the microspheres.

Preference for internucleotide linkages as a function of the number of constituents in a mixture.

Phosphoimidazolide-activated ribomononucleotides (*pN; see Scheme I) are useful substrates for the nonenzymatic synthesis of oligonucleotides. In the presence of metal ions dilute neutral aqueous solutions of *pN (0.01 M) typically yield only small amounts of dimers and traces of oligomers; most of *pN hydrolyzes to yield nucleoside 5'-monophosphate (5'NMP). An earlier investigation of *pN reactions in highly concentrated aqueous solutions (up to 1.4 M) showed, as expected, that the percentage yield of the condensation products increases and the yield of the hydrolysis product correspondingly decreases with *pN concentration (Kanavarioti 1997). Here we report product distributions in reactions with one, two, or three reactive components at the same total nucleotide concentration. *pN used as substrates were the nucleoside 5'-phosphate 2-methylimidazolides, 2-MeImpN, with N = cytidine (C), uridine (U), or guanosine (G). Reactions were conducted as self-condensations, i. e., one nucleotide only, with two components in the three binary U,C, U,G, and C,G mixtures, and with three components in the ternary U,C, G mixture. The products are 5'NMP, 5',5'-pyrophosphate-, 2',5'-, 3', 5'-linked dimers, cyclic dimers, and a small percentage of longer oligomers. The surprising finding was that, under identical conditions, including the same total monomer concentration, the product distribution differs substantially from one reaction to another, most likely due to changing intermolecular interactions depending on the constituents. Even more unexpected was the observed trend according to which reactions of the U,C,G mixture produce the highest yield of internucleotide-linked dimers, whereas the self-condensations produce the least and the reactions with the binary mixtures produce yields that fall in between. What is remarkable is that the approximately two-fold increase in the percentage yield of internucleotide-linked dimers is not due to a concentration effect or a catalyst, but to the increased complexity of the system from a single to two and three components. These observations, perhaps, provide an example of how increased complexity in relatively simple chemical systems leads to organization of the material and consequently to chemical evolution. A possible link between prebiotic chemistry and the postulated RNA world is discussed.