Slurry Storage Research Articles

Successful NH3 abatement policies and regulations in German agriculture

Anthropogenic ammonia (NH3) emissions, of which about 95 % are from agriculture, have led to environmental pollution, resulting in tremendous damage to human health and ecosystems. Thus, the NEC Directive 2016/2284/EU sets national reduction targets for NH3 emissions in individual EU countries. To implement the NEC Directive for NH3 emission targets, Germany amended the Fertilizer Application Ordinance in 2017 and 2020 (DüV_amended) and set the air pollution control regulation, Technical Instructions on Air Quality Control (TA_Luft). This study aimed to evaluate the impact of the DüV_amended on NH3 mitigation from applying livestock manure, digestates, synthetic nitrogen (N) fertilizers, and TA_Luft on housing and storage. This study showed that Germany reached the first national NH3 reduction target in 2020, as set by the NEC directive. The German DüV_amended, a significant policy change, has profoundly impacted NH3 emission mitigation from agriculture after 2017 by implementing measures aimed directly at NH3 reduction, reducing N surpluses, and improving N use efficiency. The reduction in NH3 emissions from synthetic N fertilizers between 2016 and 2022 contributed about 51 % to the decrease from the agricultural sector over the same period. Among the synthetic fertilizers, NH3 reduction from urea between 2016 and 2022 accounted for around 83 % of the total reduction from synthetic N, indicating that the NH3 emissions from urea fertilizer by reducing urea application and mandating urea to be incorporated immediately or to be stabilized with urease inhibitors played a crucial role in the sharp decrease in NH3 emissions over the last years in Germany. Achieving a high yield by lowering the synthetic N rate in this study strongly suggests that optimal reduction in N rate does not necessarily result in yield losses but rather in a pivotal relationship between the agronomic and environmental performance and indicates that the DüV_amended was an effective measure that can reduce the NH3 emissions.Over 80 % of Germany's annual agricultural NH3 emissions in 2021 and 2022 originated from livestock and digestates from energy crops. Mandatory close to the soil band application of slurry and digestates on cultivated cropland since 2020 reduced NH3 emissions. In addition, banning of broadcast application of slurry to grassland and manure incorporation within one hour on uncultivated soils will become mandatory in 2025 to comply with NEC 2030´s target of 29 % NH3 reduction relative to 2005. The recent German air pollution control regulation (TA_Luft) enforces abatement measures such as air purifiers in large poultry and pig housings and covered storage of slurry and digestate storages of large farms. The results of the German NH3 abatement strategy for synthetic N fertilizers may help reduce NH3 emissions worldwide, especially for countries consuming high amounts of urea fertilizers.

Preliminary Results on the Use of Straw Cover and Effective Microorganisms for Mitigating GHG and Ammonia Emissions in Pig Slurry Storage Systems

Spain has been the largest pork producer in the EU in recent years, leading to significant pig slurry (PS) production that requires proper management to prevent environmental impacts. The objectives of this study were to quantify greenhouse gas (GHG) and ammonia emissions and to characterize the PS in storage pond systems. A straw cover pond (SP) and addition of effective microorganisms (EMs) in a biological pond (BP) were used to treat the slurries. During two periods (autumn and spring), PS was characterized and GHG (CO2, CH4, N2O) and NH3 emissions were measured with a dynamic chamber. After 5 weeks of storage, BP achieved a reduction of 96% for CO2, 98% for CH4 and 59% for NH3 compared to the control pond (CP) in spring, while SP presented a 74% reduction for CO2 in autumn, and 60% and 97% reductions for CH4 and NH3, respectively, in spring. Additionally, the PS samples showed a decreasing trend for EC, dry matter, COD, BOD5, total N, NH4+-N, Org.-N, NO3−-N, and PO43− during both seasons. This preliminary study shows promise in reducing GHG/NH3 emissions and improving PS properties, but further replication is recommended. Varying straw cover thickness, optimizing EM dose, and a pH reduction may enhance outcomes.

SEDIMENTATION IN HYDROELECTRIC POWER TURBINES

The primary cause of erosive wear and energy loss is friction, and reportedly, one-third of the world’s energy resources go to overcome friction by several methods. The presence of deposits in water is a common problem in mountainous regions and some Ukrainian hydroelectric power stations. Hydro turbines face serious issues related to erosion from deposits during operation. Erosive wear occurs due to the impact of solid particles against a solid surface. The current environment contains particles whose velocity is sufficient to damage metal surfaces. Various researchers have conducted numerous studies to minimise the effect of deposit erosion in multiple locations of Francis turbine components (FT). For this purpose, they performed field investigations, experimental measurements, empirical modelling, computational fluid dynamics (CFD) work, and other methods. Various empirical models have been used to describe erosive wear in terms of material and fluid properties. They established that, for ductile materials, maximum erosion occurs at an impact angle of 30°, whereas for brittle materials, it occurs in the range of 80–90°. In the literature, various experimental methods are available to quantitatively assess slurry erosion, such as the rotating disk apparatus (RDA), slurry tank testing, jet erosion testing, and rotating drum testing. Due to manufacturing technologies used in mechanical processing processes, the exposed surface has a certain absolute roughness that increases during machine operation due to abrasion or erosion. Therefore, surface texture leads to increased energy efficiency losses during operation. Technological advancements have facilitated the widespread use of computational tools to address deposit erosion issues. In recent decades, numerical methodology has been a widely used and effective tool, yielding tangible and reliable results. This study examines potential methods for detecting and reducing deposits. This type of erosion depends on flow characteristics, surface properties, and properties of the eroding material. The article provides comprehensive information on sedimentation (deposits) causing wear in hydraulic turbines. Keywords: hydroelectric turbine, sedimentation erosion, computational fluid dynamics, fluid-structure interaction.

Estimating methane emissions from manure: a suitable case for treatment?

Abstract Methane from livestock is a significant source of greenhouse gas emissions. Under the UN Framework Convention on Climate Change (UNFCCC), Annex I countries’ National Inventories report emissions from cattle as enteric or from manure management at ratios of between 3:1 and 9:1 depending on country and cattle type. Field research generally supports the inventories’ assumptions about enteric emissions, but these ratios have focused interest on enteric emissions and diverted attention away from those from manure management. Official calculations about manure management emissions factors are more varied than those for enteric emissions and evidence from field measurements suggests inventories may be underestimating manure management emissions especially in the dairy sector. This paper has three objectives. First, it reviews the science underpinning the international framework for estimating methane emissions from manure management. Second, it presents data from two dairy farms in south-west England where measured emissions of methane from slurry storage facilities are found to be four to five times greater than the assumptions in the UK’s inventory. If these measurements were representative of the UK, the implication is that total methane emissions from the UK dairy herd would be over 40% greater than the level reported to the UNFCCC and the proportion of total methane emissions from dairy cows arising from manure management would be almost a half rather than less than a quarter. Finally, the paper assesses the potential value if methane were captured from slurry storage facilities. Its value as a biogas is estimated to be £500 million per year for the UK dairy industry (at forecourt diesel prices). The paper concludes that the scale of emissions and the potential economic value of lost biogas are sufficient to warrant urgent research and action to reduce emissions from manure management with the beneficial prospect that a valuable new income stream for farm businesses could also be realised.

Rapid prediction of flow and concentration fields in solid-liquid suspensions of slurry electrolysis tanks

Rapid prediction of flow and concentration fields in solid-liquid suspensions of slurry electrolysis tanks

Reducing Methane, Carbon Dioxide, and Ammonia Emissions from Stored Pig Slurry Using Bacillus-Biological Additives and Aeration

This study delves into the innovative application of a novel bacterial and enzyme mixture alone or combined with aeration in mitigating emissions from pig slurry storage and explores their impacts on the methane (CH4), carbon dioxide (CO2), and ammonia (NH3) emissions from stored pig slurry. A dynamic chamber was used in this research to assess the efficacy of the treatments. Biological additives (HIPO-PURÍN) of specific microbial strains were tested (a mixture ofof Bacillus subtilis, Bacillus megaterium, Bacillus licheniformis, Bacillus amyloliquefacien, and Bacillus thuringiensis) alone and combined with an aeration system (OXI-FUCH). Controlled experiments simulated storage conditions, where emissions of ammonia, methane, and carbon dioxide were measured. By analyzing the results statistically, the treatment with HIPO-PURÍN demonstrated a significant reduction in CH4 emissions by 67% and CO2 emissions by 60% with the use of biological additives, which was increased to 99% and 87%, respectively, when combined with OXI-FUCH aeration, compared to untreated slurry. Ammonia emissions were substantially reduced by 90% with biological additives alone and by 76% when combined with aeration. The study was driven by the need to develop sustainable solutions for livestock waste management, particularly in reducing emissions from pig slurry. It introduces techniques that significantly lower greenhouse gases, aligning with circular economy goals and setting a new standard for sustainable agriculture. Furthermore, there is a need to validate that farmers can independently manage pig slurry using simple and effective treatments techniques with profound environmental benefits, encouraging broader adoption of climate-conscious practices.

Mitigation of ammonia and methane emissions with manure amendments during storage of cattle slurry.

This study aimed at assessing the efficacy of manure amendments in abating ammonia (NH3) and methane (CH4) emissions during storage. Two experiments were carried out. Experiment 1 was conducted using 20 L of slurry for 98 days. Treatments were: aluminium sulphate (alum), lactogypsum, zeolite, actiglene, ammonium thiosulphate, biochar, dairy processing waste, Digest-IT and control (without amendment). Experiment 2 was conducted using 660 L of slurry in underground storage tanks for 77 days. Treatments were: sulphuric acid, gypsum, biochar and control (without amendment). NH3 measurements for experiment 1 and experiment 2 were conducted using the photoacoustic gas monitor and dynamic chamber techniques, respectively. CH4 was measured using the static chamber technique in both experiments. The effect of amendments on slurry composition was determined at the end of the experiments. Experiment 1 showed a significant reduction in NH3 emissions in the alum (82%), lactogypsum (46%) and zeolite (32%) treatments relative to the control (100.3% total ammoniacal nitrogen (TAN)). CH4 was reduced significantly in the alum (87%), ammonium thiosulphate (64%) and lactogypsum (67%) relative to the control (291.9 g m-2). Experiment 2 showed a significant reduction (32%) in NH3 emissions in the sulphuric acid relative to the control (4.4% TAN). CH4 was reduced significantly in the sulphuric acid (46%), gypsum (39%) and biochar (15%) treatments relative to the control (291.9 g m-2). In general, amendments altered slurry composition such as dry matter, volatile solids, carbon and nitrogen contents at the end of storage. Lactogypsum, alum and sulphuric acid were effective in abating both NH3 and CH4 emissions and can contribute to improving air quality.

Manure temperature prediction for slurry storage in Sweden: Model validation including effects of shading, snow cover and mixing

Measuring and modelling manure temperatures are crucial for estimating greenhouse gas emissions from liquid manure storage. The manure temperature was recorded at various depths in two swine slurry storage tanks situated in Vallentuna (VA) and Örsundsbro (OR) in Sweden. These data were used to assess the effectiveness of a revised mechanistic model for estimating manure temperatures, which incorporates the effects of wall shading, snow cover, and manure input mixing. The average manure temperatures were higher than air temperatures in the summer and fall. This indicated that using air temperature would result in an underestimation of methane emissions when applying the 2019 IPCC Refinement methodology. The revised model estimated manure temperatures for spring, summer, fall, and winter as 4.8, 16.1, 7.8, and 2.6 °C at the VA tank and 11.6, 17.1, 9.5, and 3.6 °C at the OR tank. The root mean square errors between daily simulated and observed temperatures in the summer decreased in both tanks due to incorporating shadow effect into the revised model. Fall estimates did not improve, possibly because of uncertainties from slurry removal and higher precipitation inputs. Sensitivity analysis indicated that solar radiative heat input was reduced with higher tank walls and smaller tank diameters when applying the revised model. Wall shading may influence manure temperatures in tanks with small diameters at high-latitude locations. This study offers insights into understanding the relationship between manure temperatures and its thermal balance influenced by latitude, storage design, snow cover and mixing, and its implications for accurately estimating methane emissions.

Working with cattle slurry on farms: emission and dispersion of hydrogen sulfide gas during stirring.

Over the past 15 years, there have been numerous fatalities related to working with animal slurry. Working with cattle slurry releases toxic gases, in particular, hydrogen sulphide (H2S), which can cause acute central nervous system toxicity, breathing difficulties, and death if exposed to high concentrations. Real-time measurements of H2S gas were taken over distance and time, during the stirring of cattle slurry on farms. Gas was measured at eight slurry stores with differing typical configurations of indoor or outdoor stores and with or without slatted flooring. Highest H2S gas levels were measured from indoor stores under slatted floors, and generally at positions closest to the stirrer or the point of maximum stirring, with levels decreasing with distance from source. Most of the data indicate H2S gas levels increase very rapidly after stirring starts, and mostly decline to baseline levels within 30 min post start of stirring. There were, however, circumstances where gas levels remained high and only started to decline once the stirrer had stopped. H2S gas levels at all farms, at all positions measured were consistently below 10 ppm within 30 min of the stirrer being stopped. The current data highlight areas of the farm and ways of working that have the potential for workers and others to be at risk of exposure to toxic slurry gases. The area should be left to ventilate naturally for at least 30 min after the stirrer has been stopped before re-entering buildings. Influencing the design of stirring equipment and future slurry stores would likely reduce the risk of worker exposure to slurry gases.

Understanding and mitigating temperature-induced agglomeration in silica-based chemical mechanical planarization (CMP) slurry storage

This study explores the impact of temperature on silica particle agglomeration in Chemical Mechanical Planarization (CMP) slurries during storage. Slurries were stored at 15 °C, room temperature, and 45 °C, and analyzed. ATR-FTIR, RAMAN, SEM, zeta potential, and LPC were employed providing qualitative and quantitative data on slurry stability and agglomeration tendencies. Elevated temperature storage significantly increased agglomeration and large particle counts with particle counts value of ∼1.2×107 Part./ml, likely due to water molecule dehydration leading to destabilization. Low-temperature storage also induced agglomeration but to a lesser extent with particle counts the value of ∼4.0×106 Part./ml compared with the RT (∼2.0×106 Part./ml). Short-term storage yielded soft agglomerates with LPC of ∼(2.0–4.0)×106 Part./ml, while long-term high-temperature storage led to hard agglomerates with LPC of ∼3.0×107 Part./ml. The ATR-FTIR and Raman analysis indicate that the spectroscopic features of the original slurry exhibited changes upon variation of storage temperature from RT to 15 and 45 °C. The study also explored the reversibility of agglomeration post-treatment, indicating a potential mitigation pathway. The results demonstrated an inverse relationship between temperature and dissolved oxygen (DO) in silica slurries. For example. the curves depict a decrease in oxygen content from ∼10 ppm at RT to 7 ppm at 45 °C with increasing aging time. A mechanism outlining the temperature and aging-induced agglomeration was proposed, linking temperature fluctuations and thermodynamic aspects to colloidal stability. These findings offer a robust understanding of temperature-induced agglomeration in silica-based CMP slurry storage, paving the way for developing strategies to alleviate these issues and ensuring consistent CMP performance in semiconductor manufacturing.

Triaxial testing response of compacted iron ore tailings considering a broad spectrum of confining pressures

The filtered tailings disposal (dry stacking) up to 300 m high is an alternative to overcome the drawbacks related to the slurry tailings storage in large impoundments as it is safer and demands smaller portions of the existing landform. Even so, the understanding of the denser and dewatered material response over a broad range of confining pressures is essential to safely design tall dry stacking tailings facilities. Accordingly, the present research assesses the mechanical behavior of compacted iron ore tailings through triaxial tests. A series of compression and extension drained and undrained triaxial tests were conducted over a wide spectrum of confinements (σ́3 ranging from 75 to 8,000 kPa) to check possible particle breakage occurrence and effects. The influence of the initial density due to compaction was, as well, evaluated since the tests were performed using specimens molded at distinct dry unit weight values. The results were analyzed in the light of the critical state soil mechanics and have indicated the existence of a curvilinear critical state line in the ν: log ṕ plane. Small particle breakage has occurred and can be associated with reduction in surface roughness, breakage of asperities, and reduction in particle angularity. Moreover, a tendency for static liquefaction was observed amongst the loosest specimens sheared under the lowest confining levels.

Developing a novel technology for slurry management by project-based learning

Farming is responsible for 30% of global anthropogenic emissions. A novel technology, aligning with current regulations of covering slurry stores, has been developed for processing anaerobic digestate liquor, which is obtained from the screw press stage. Instead of using hazardous chemicals, such as sulfuric acid, to capture ammonia and greenhouse gases, the artifact contains calcium chloride as deliquescent salt. Preliminary simulations in Aspen Plus® v12 showed that the absorption of NH3 and carbon dioxide during the solid–liquid separation was feasible and the resulting clean brine could be used as chemical amendment of untreated slurry. The characterization of the performance of the artifact was organized following a project-based learning active teaching method, for a group of 3 students (17-year-olds) of secondary education, as part of the In2ScienceUK program. The collection of empirical data allowed the contents of the curriculum to be contextualized, enhancing environmental awareness of participants. A titrimetric method was employed to determine the content of NH3 and CO2 in the brine, and the granulation of the dewatered liquor with the fibers of anaerobic digestate was investigated by determining the compression strength required to break the pellets. The operation capacity of the prototype was found to be 250 m3 of liquor per year, at a cost of £1/m3. The use of the filtered brine as chemical amendment also represented an additional 5.60 grams of ammoniacal nitrogen and 0.96 grams of inorganic carbon per cubic meter of unprocessed slurry. The concentrated liquor was a good binding agent that provided the pellets with a compressive strength of 207.00 ± 26.36 N, which was above the threshold value for commercialization purposes (50 N). The advances in the development of the prototype enhanced the suitability of the technology for industrial scale applications but hindered the adoption of subsequent editions of this pedagogic tool.

Performance Assessment of Solar Ice Slurry Cold Storage System for Solar Refrigerated Vehicle

This article mainly analyzes the ice slurry cold storage system in solar refrigerated vehicles, calculates and studies the thermal properties of the ice slurry, the cold load of the refrigerated vehicle, and the solar photovoltaic panels, and calculates the fuel savings of using solar power generation. Study the demand for ice slurry in ice slurry storage systems under different energy utilization efficiencies, analyze the economy of solar ice slurry generation systems, and calculate the recovery period of the system in this paper. The daily power generation of solar photovoltaic panels can run the electric motor for 2.93 hours. The solar refrigerated truck can save 7.91 liters of oil per day and reduce carbon dioxide emissions by 1.25×107 liters per day. The average annual electricity cost savings are 4026.67 CNY. Based on the total cost of the photovoltaic energy storage hybrid quality system, it will take 3.89 years to recover the cost. Calculate the density and enthalpy of the ice slurry based on the thermophysical model of the ice slurry, and provide different utilization amounts for the ice slurry mass generated by the ice slurry generation system at different efficiencies. Calculate the total weight of the ice slurry system.

Mitigation of gaseous emissions from dairy livestock: A farm-level method to examine the financial implications

Feeding the world's population while minimising the contribution of agriculture to climate change is one of the greatest challenges facing modern society. This challenge is particularly pronounced for dairy production where the carbon footprint of products and the mitigation costs are high, relative to other food stuffs. This paper reviews a number of mitigation measures that may be adopted by dairy farmers to reduce greenhouse gas emissions from their farms. A simulation model is developed to assess the cost-benefit of a range of mitigation measures. The model is applied to data from Ireland, a country with a large export-oriented dairy industry, for a range of farms including top, middle and bottom performing farms from a profitability perspective. The mitigation measures modelled included animal productivity, grass production and utilisation, better reproductive performance, early compact calving, reduced crude protein, decreased fertiliser N, protected urea, white clover, slurry tank cover and low emission slurry spreading (LESS). The results show that over half of the greenhouse gas abatement potential and most of the ammonia abatement potential were realised with cost-beneficial measures. Animal and feed-related measures that increased efficiency drove the abatement of GHG emissions. Low-emission slurry spreading was beneficial for the bottom and middle one-third of farms, while protected urea and reducing nitrogen use accounted for most of the ammonia abatement potential for the most profitable farms. Results showed that combining mitigation measures resulted in a decrease of 23%, 19%, and 12% in GHG emissions below 2020 levels for the bottom, middle, and top performing dairy farms, respectively. The findings imply that top dairy farms, that are already managed efficiently and optimally, may struggle to achieve the national and international GHG reduction targets with existing technologies and practices.

Thermally enhanced nanocomposite phase change material slurry for solar-thermal energy storage

This paper investigates the photothermal conversion performance of an innovative heat transfer fluid containing nano-encapsulated phase change material (PCM) with metallic shell materials in a solar thermal energy storage system. The influences of shell thickness, core size, shell material type, PCM mass and shell volume concentrations on the thermal performance of the heat storage medium are investigated and compared. The results show that the heat transfer rates of water-based Ag, Au, Cu and Al nanofluids are 6.89, 5.86, 7.05 and 6.99 W, respectively, while slurries formed by adding paraffin@Ag, Au, Cu and Al nano capsules to pure water enhance heat transfer by 6.18, 13.38, 10.8 and 11.33 %, respectively. The metallic nanoparticle-based shell materials further augment the temperature and energy storage gains by enhancing the solar radiation capture capability of the heat storage medium. Specifically, depending on the mass concentration of PCM, the storage capacity of paraffin@Cu slurry is augmented by up to 290 %. As the shell thickness of the Ag particles also decreases from 8 to 2 nm, it augments the slurry's storage ability for thermal energy by 7 %. The enhancement in the dimensions of the nano capsules, however, causes the surface area-to-volume ratio (SA:V) to reduce the photothermal conversion of the slurry by clustering. Therefore, the thermal energy storage behaviour of the Paraffin@Cu slurry is diminished by 5 % as the core size enhances from 10 to 40 nm. Further, the augmentation in the volume concentration of Al particles in the shell surprisingly reduces the thermal energy storage by 5 %. Finally, paraffin-based solid PCM is also experimentally tested for validation of the specific heat capacity model at various wind speeds and solar radiation.

Ammonia emission factors from cattle production systems in Ireland – a review

Ammonia (NH3) emissions from livestock production contribute to environmental pollution. To address this challenge, the European Union (EU) National Emission Reduction Commitments Directive 2016/2284 (NECD) sets NH3 reduction targets for EU member states. In order to achieve these targets, several strategies have been evaluated under Irish conditions. A compilation of emission factors (EFs) from studies which evaluated these strategies is necessary to assess their effectiveness. This paper reports NH3 EFs from cattle production under Irish conditions. The results from the review show that the mean EFs from the deposition of dung, urine and urea applied to urine patches on grasslands were 4%, 9% and 8% total nitrogen (TN), respectively. EFs from the application of urea to urine patches were reduced by 28% after the addition of the urease inhibitor N-(n-butyl) thiophosphoric triamide (NBPT) to urea. The mean EF of 28% TN reported for urea fertiliser was almost 7 times higher than calcium ammonium nitrate (CAN). The inclusion of urease inhibitors with urea fertilisation on grassland led to EF reduction of up to 86%. The mean EFs from cattle houses, concrete yards, slurry storage pits and slurry landspreading were approximately 13%, 35%, 60% and 59% total ammoniacal nitrogen (TAN), respectively. The most effective NH3 abatement strategies for concrete yards and slurry storage were immediate cleaning of concrete floors (up to 89% reduction) after excreta deposition and the application of chemical amendments (sulphuric acid, acetic acid, alum and ferric chloride) to slurry in storage pits (up to 98% reduction), respectively. Low-emission spreading strategies and slurry acidification were effective at abating EFs after slurry application to land.

Effects of Long-Term Storage of Pig Slurry on Nitrogen Loss in Different Seasons and Storage Conditions

Highlights The physicochemical properties of the pig slurry in different seasons were different, the contents of COD and total nitrogen of the pig slurry in the summer were significantly higher than the pig slurry in the other seasons. The slurry temperature varied greatly in different seasons, which affected the changes of indicators in pig slurry during long-term storage. Storing pig slurry under sealed conditions was significantly more beneficial in reducing N loss, which was 47%–56% lower than that in the open treatments. Abstract. Pig slurry (PS) can be applied to farmland only in certain periods during the year, so long-term storage is required before field application. The effects of the long-term storage of the PS on N loss in different seasons and under different storage conditions (open and sealed storage) were investigated in this study. The physicochemical properties and slurry temperature varied greatly in different seasons. The electrical conductivity, chemical oxygen demand, ammonium nitrogen, nitrate nitrogen, total nitrogen (TN), and heavy metals (Cu, Zn, Pb, As, and Cd) decreased after 150 days of storage, while the pH value increased, and all these indicators (except for the heavy metals) were affected by the slurry temperature, exhibiting a larger decrease at higher slurry temperatures. The decrease in the N loss was 47%–56% lower in the sealed treatments than in the open treatments. The As, Pb, and Cd contents of the stored PS (except for the AU-OP treatment) met the requirements specified for GB/T 40750-2021. Overall, storing PS under sealed and lower temperature conditions was conducive to reducing N loss and improving the N content of the stored PS. Keywords: Heavy metal, Nitrogen loss, Open storage, Pig slurry, Sealed storage, Temperature.

Assessment of a Novel Real-Time Bio-Liquor Circulation System for Manure Management and Mitigation of Odor Potential in Swine Farming.

Recently, circulating biologically treated manure in slurry pits has been used as an odor reduction technology, but few successful results have been reported, due to the lack of proper control strategies for bioreactors. This study was conducted to investigate the performance of the developed real-time controlled bio-liquor circulation system (BCS) at farm scale. The BCS was operated sequentially as per swine manure inflow (anoxic, aerobic, and settling) circulation to the slurry pit. Each operational phase was self-adjusted in real-time using a novel algorithm for detecting the control point on the oxidation reduction potential (ORP) and pH (mV)-time profiles, the nitrogen break point (NBP), and the nitrate knee point (NKP) in the aerobic and anoxic phases, respectively. The NH4-N in the slurry manure was thoroughly removed (100%) in the bioreactor, optimizing the duration of each operational phase by accurately detecting real-time control points. The newly developed real-time BCS decreased the nitrogen and organic matter in the slurry pit by >70%, and the potential ammonia and methane emissions by 75% and 95%, respectively. This study highlights that improved BCS that utilizes ORP tracking and pH (mV)-time profiles can effectively optimize BCS operation, and thereby reduce malodor and GHG emissions from swine farms.

The effects of incorporating renewable energy into the environmental footprint of beef production

This study quantifies the influence of the on-farm implementation of different energy mitigation systems, anaerobic digestion (AD) for biogas production and rooftop photovoltaics (PV), and assesses the environmental and energy impact on beef cattle production. Data on technical aspects were collected and a cradle-to-farm gate life cycle assessment approach was adopted. Two baseline production scenarios, with conventional manure and slurry management (considering different slurry storage: open or covered), were compared with three alternatives: (i) with the implementation of AD plant only; (ii) with the implementation of a PV system only; and (iii) with both. Impacts on the infrastructure and operation of AD plant and PV systems were considered, as well as their influence on emissions and electricity generation. The latter was managed with a system expansion, considering an environmental credit. The results, expressed per 1 kg of live weight of beef cattle produced, showed widespread improvements across the impact categories assessed. The AD scenario presented larger mitigations than the PV system alone, but the best result is achieved when both energy systems are implemented, with global warming potential reduced by 12 % and fossil resource scarcity by 35 %. This work represents a benchmark for future life cycle analysis of renewable energy system implementation for livestock.

Factors influencing the carbon footprint of milk production on dairy farms with different feeding strategies in western Europe

Greenhouse gas emissions from dairy production represent a major source of emissions especially in Western Europe where the sector has grown over the past decade. Different feeding strategies have evolved and there is a need to identify effective mitigation measures. Life cycle assessment (LCA) was used to examine carbon footprints (CFs) of milk production across 71 commercial dairy farms in Ireland, Northern Ireland, England, Spain (Galicia and Basque regions), Portugal and France based on monthly data collection over two years. Emissions up to the farm gate were calculated within a global boundary with both higher tier emission factors (HTEF) applicable in respective countries, and default emission factors (DEF). The global warming potential (GWP) used was the GWP100 metric, however results were also calculated using GWP20 for comparison. Functional units were: (i) one tonne fat and protein corrected milk (FPCM); (ii) 1 ha of on-farm agricultural area (FAA); (iii) 1 ha of global agricultural area (GAA). Farms were categorised based on the proportion of time that cows spent grazing. Mean CF per tonne FPCM (FPCM-CF) were 1,129, 1237 and 1519 kg CO2e for grazing (>220d grazing; n = 16), mixed (up to 219d grazing; n = 17) and housed farms (0d grazing; n = 38), respectively. housed had the widest range, from 884 to 2494 kg CO2e/tonne FPCM, and included the farm with the overall lowest FPCM-CF. housed also had the highest mean CF per ha FAA: 44.1 tonne CO2e, followed by mixed (15.2 tonne) and grazing (11.6 tonne). CF (tonne CO2e) per ha GAA followed the same ranking: housed (15.1), mixed (9.8) and grazing (9.2). There was no difference in ranking of the feeding strategies using DEF in comparison with HTEF. A stepwise regression analysis identified feed efficiency and age at first calving as important factors in determining FPCM-CF for all farms. Furthermore, N surplus was important for grazing &mixed farms. The proportion of uncovered slurry storage, milk yield per cow and the amount of bought in concentrate per cow were important for housed farms. Wide variation in CFs implies considerable potential for lowering emissions per tonne FPCM and per ha FAA and GAA, but it is imperative that mitigation measures are tailored to feeding strategy.