Slower Degradation Rate Research Articles

Congruent Long-Term Declines in Carbon and Biodiversity Are a Signature of Forest Degradation.

Recent global policy initiatives aimed at reducing forest degradation require practical definitions of degradation that are readily monitored. However, consistent approaches for monitoring forest degradation over the long term and at broad scales are lacking. We quantified the long-term effects of intensive wood harvest on above-ground carbon and biodiversity at fine resolutions (30 m2) and broad scales (New Brunswick, Canada; 72,908 km2). Model predictions for above-ground biomass were highly correlated with independent data (r = 0.77). After accounting for carbon stored in wood products, net CO2 emissions from forests for the region from 1985 to 2020 were 141 CO2e Tg (4.02 TgCO2e year-1; 32% of all reported emissions). We found strong positive correlations between locations with declines in above-ground carbon and habitats for old-forest bird species, which have lost > 20% habitat over 35 years. High congruence between biodiversity and forest carbon offers potential for policy incentives to conserve both objectives simultaneously and slow rates of forest degradation. These methods could be used to track forest degradation for managed forest regions worldwide.

Poly(lactide)-Based Materials Modified with Biomolecules: A Review.

Poly(lactic acid) (PLA) is characterized by unique features, e.g., it is environmentally friendly, biocompatible, has good thermomechanical properties, and is readily available and biodegradable. Due to the increasing pollution of the environment, PLA is a promising alternative that can potentially replace petroleum-derived polymers. Different biodegradable polymers have numerous biomedical applications and are used as packaging materials. Because the pure form of PLA is delicate, brittle, and is characterized by a slow degradation rate and a low thermal resistance and crystallization rate, these disadvantages limit the range of applications of this polymer. However, the properties of PLA can be improved by chemical or physical modification, e.g., with biomolecules. The subject of this review is the modification of PLA properties with three classes of biomolecules: polysaccharides, proteins, and nucleic acids. A quite extensive description of the most promising strategies leading to improvement of the bioactivity of PLA, through modification with these biomolecules, is presented in this review. Thus, this article deals mainly with a presentation of the major developments and research results concerning PLA-based materials modified with different biomolecules (described in the world literature during the last decades), with a focus on such methods as blending, copolymerization, or composites fabrication. The biomedical and unique biological applications of PLA-based materials, especially modified with polysaccharides and proteins, are reviewed, taking into account the growing interest and great practical potential of these new biodegradable biomaterials.

Evaluation of photocatalytic efficiency of TiO2 applied over cement plaster for mitigating urban air pollutant: TVOC

Photocatalysis emerged as a prominent method for mitigating air pollution stemming from emissions of total volatile organic compounds (TVOCs) in both indoor and outdoor environments. Given the slow degradation rate of certain TVOCs, which pose health risks, including carcinogenicity, there is a pressing need for effective air purification strategies, particularly within built environments where individuals spend substantial amounts of time. This study delves into the efficacy of TiO2 photocatalysis in reducing air pollutants when applied to building surfaces. Cement mortar samples, incorporating varied doses of TiO2 ranging from 7.83E-03 g/cm2 to 4.92E-02 g/cm2, were prepared and examined within batch reactors, both under sunlight exposure and in the absence thereof, to gauge their degradation rates towards TVOCs. Furthermore, surface characterization techniques were employed to explicate the microstructural properties of TiO2-coated plastered samples. The results obtained demonstrated the variation in the rate of degradation from 1.09E-04±0.1 % to 3.1E-4 ± 1.13 % min−1cm−2 for various initial concentrations of total volatile organic compounds (TVOCs) in the range of 600 ppm to 2900 ppm over a period of 100 min. The selected approach demonstrated the maximum degradation rate constant of 5.2E-04 min−1cm−2 corresponding to 15 % of TiO2 dose by weight of cement. These findings underscore the promise of TiO2 in purifying polluted air and advocate for its widespread implementation on building surfaces to enhance air quality.

Exploring the effect of hemp fibers’ addition on the properties of PLA/PPAd biodegradable blends

Poly(lactic acid) (PLA) is a compostable aliphatic polymer with enhanced strength and toughness, and it is a promising material for packaging products. Polymer blending is a financially feasible and easy way to upgrade its properties, such as its slow degradation and crystallization rates and its modest elongation, and thus, make it more adaptable. Furthermore, the use of natural fibers as fillers can reinforce the biobased character of the final composite materials and enhance their antioxidant activity values, a crucial property of polymers that are addressed for active packaging. Herein, the influence of the addition of hemp fibers (HF) on the features of poly(lactic acid)/poly(propylene adipate) blends containing 85/15 w/w PLA/PPAd, was investigated. The utilization of a poly(lactic acid)-co-poly(propylene adipate) block copolymer (cop) as a compatibilizer was also examined. The thermal, morphological and mechanical assets of the composite materials were evaluated with the implementation of multiple techniques. The addition of HF enhanced the hydrophobicity and biodegradation of the composites, render them as candidates for several applications. Furthermore, the introduction of the compatibilizer successfully increases the adhesion between the polymeric matrices and the HF, resulting in enhanced properties.

Microplastics deposition in Arctic sediments of Greenland increases significantly after 1950

Marine sediments are archives of environmental change with pollutants potentially acting as chronographic markers of the Anthropocene. Particularly, the vertical transport and burial, as well as slow degradation rate of microplastics, indicate an eventual incorporation into the geological record. A high-resolution reconstruction of microplastics records requires high sedimentation rates, and in Disko Bay (Greenland), this quality coincides with a need for plastic pollution data. Here, a Greenlandic sediment core dated back to 1930 ± 2 was reconstructed for microplastics accumulation via micro-Fourier transform infrared spectroscopy. We show 85 years of fluctuating microplastics accumulation (987 − 16,645 particles Kg−1) down to 20 µm and diversified into eight polymers. Polyethylene (47%) and polypropylene (32%) were more abundantly present through time. Microplastics accumulation increases significantly after 1950 along with major socio-economic development in the area, suggesting an influence from regional stressors. Regional microplastics reconstructions must therefore be considered in the pursuit of an Anthropocene global plastic horizon.

Solubilization and enhanced degradation of benzene phenolic derivatives-Bisphenol A/Triclosan using a biosurfactant producing white rot fungus Hypocrea lixii S5 with plant growth promoting traits.

Endocrine disrupting chemicals (EDCs) as benzene phenolic derivatives being hydrophobic partition to organic matter in sludge/soil sediments and show slow degradation rate owing to poor bioavailability to microbes. In the present study, the potential of a versatile white rot fungal isolate S5 identified as Hypocrea lixii was monitored to degrade bisphenol A (BPA)/triclosan (TCS) under shake flask conditions with concomitant production of lipopeptide biosurfactant (BS) and plant growth promotion. Sufficient growth of WRF for 5 days before supplementation of 50 ppm EDC (BPA/TCS) in set B showed an increase in degradation rates by 23% and 29% with corresponding increase in secretion of lignin-modifying enzymes compared to set A wherein almost 84% and 97% inhibition in fungal growth was observed when BPA/TCS were added at time of fungal inoculation. Further in set B, EDC concentration stimulated expression of laccase and lignin peroxidase (Lip) with 24.44 U/L of laccase and 281.69 U/L of Lip in 100 ppm BPA and 344 U/L Lip in 50 ppm TCS supplemented medium compared to their respective controls (without EDC). Biodegradation was also found to be correlated with lowering of surface tension from 57.02 mN/m (uninoculated control) to 44.16 mN/m in case of BPA and 38.49 mN/m in TCS, indicative of biosurfactant (BS) production. FTIR, GC-MS, and LC-ESI/MSMS confirmed the presence of surfactin lipopeptide isoforms. The WRF also displayed positive plant growth promoting traits as production of ammonia, indole acetic acid, siderophores, Zn solubilization, and 1-1-aminocyclopropane-1-carboxylate (ACC) deaminase activity, reflecting its soil restoration ability. The combined traits of biosurfactant production, EDC degradation and plant growth promotion displayed by WRF will help in emulsifying the hydrophobic pollutants favoring their fast degradation along with restoration of contaminated soil in natural conditions.

Load frequency control performance enhancement of an electric vehicle integrated time-delay multi-microgrid system

ABSTRACT Frequency control in a microgrid (μG) is problematic due to low inertia of distributed generators (DGs) and uncertainty of the renewable energy source-dependent DGs. Consequently, deploying distributed storage units (DSUs) in a μG is crucial for quickly arresting frequency deviations. The electric vehicle (EV) technology, as DSU, is being preferred over conventional energy storage due to its lower cost and slower degradation rate, facilitating demand side response in a μG. The adoption of the EV technology necessitates an open communication infrastructure in the μG, with a pre-existing communication time delay (CTD). This article explores the impact of EV integration on load frequency control (LFC) performance of a multi-microgrid (MμG) system and determines an optimal CTD value simultaneously. A cyclical parthenogenesis algorithm-optimized 2DOF-FOPID controller is implemented to obtain dynamic responses of the MμG system. Simulation results reveal significant improvements in dynamic responses when integrating EVs in the MμG, with a 97.33% increase in objective function value. The recommended controller also outperforms standard controllers in terms of how quickly frequency and tie-line power variations settle down to zero. Thus, the proposed controller meets the LFC requirements. Robustness of the proposed LFC scheme is tested against parametric variations in the MμG system.

Microbially derived surfactants: an ecofriendly, innovative, and effective approach for managing environmental contaminants.

The natural environment is often contaminated with hydrophobic pollutants such as long-chain hydrocarbons, petrochemicals, oil spills, pesticides, and heavy metals. Hydrophobic pollutants with a toxic nature, slow degradation rates, and low solubility pose serious threats to the environment and human health. Decontamination based on conventional chemical surfactants has been found to be toxic, thereby limiting its application in pharmaceutical and cosmetic industries. In contrast, biosurfactants synthesized by various microbial species have been considered superior to chemical counterparts due to their non-toxic and economical nature. Some biosurfactants can withstand a wide range of fluctuations in temperature and pH. Recently, biosurfactants have emerged as innovative biomolecules not only for solubilization but also for the biodegradation of environmental pollutants such as heavy metals, pesticides, petroleum hydrocarbons, and oil spills. Biosurfactants have been well documented to function as emulsifiers, dispersion stabilizers, and wetting agents. The amphiphilic nature of biosurfactants has the potential to enhance the solubility of hydrophobic pollutants such as petroleum hydrocarbons and oil spills by reducing interfacial surface tension after distribution in two immiscible surfaces. However, the remediation of contaminants using biosurfactants is affected considerably by temperature, pH, media composition, stirring rate, and microorganisms selected for biosurfactant production. The present review has briefly discussed the current advancements in microbially synthesized biosurfactants, factors affecting production, and their application in the remediation of environmental contaminants of a hydrophobic nature. In addition, the latest aspect of the circular bioeconomy is discussed in terms of generating biosurfactants from waste and the global economic aspects of biosurfactant production.

Fabrication and characterization of TPGS-modified chlorogenic acid liposomes and its bioavailability in rats.

Chlorogenic acid (CGA), a polyphenol compound, exhibits excellent anti-oxidative, anti-hypoxic, antibacterial, antiviral, and anti-inflammatory activities, however the bioactivity of it has not been fully utilized in vivo due to its instability and low bioavailability. To address these issues, we prepared and characterized CGA-TPGS-LP, which is a TPGS-modified liposome loaded with CGA. The pharmacokinetics of CGA-TPGS-LP were studied in rats after oral administration. CGA-TPGS-LP was fabricated using a combination of thin film dispersion and ion-driven methods. The liposomes were observed to be uniformly small and spherical in shape. Their membranes were composed of lecithin, cholesterol, and TPGS lipophilic head with a TPGS hydrophilic tail chain coating on its surface. The loading efficiency and encapsulation efficiency were found to be 11.21% and 83.22%, respectively. The physicochemical characterisation demonstrated that the CGA was present in an amorphous form and retained its original structural state within the liposomal formulation. The stability of CGA was significantly improved by fabricating TPGS-LP. CGA-TPGS-LP exhibited good sustained-release properties in both simulated gastric and intestinal fluids. Following oral administration, ten metabolites were identified in rat plasma using UPLC-QTOF-MS. UPLC-QqQ-MS/MS quantitative analysis demonstrated that the oral bioavailability of CGA encapsulated in TPGS-modified liposomes was enhanced by 1.52 times. In addition, the three main metabolites of CGA had higher plasma concentrations and slower degradation rate. These results demonstrate that TPGS-modified liposomes could be a feasible strategy to further enhance the oral bioavailability of CGA, facilitating its clinical use.

Metabolic engineering of Pseudomonas bharatica CSV86T to degrade Carbaryl (1-naphthyl-N-methylcarbamate) via the salicylate-catechol route.

Pseudomonas bharatica CSV86T displays the unique property of preferential utilization of aromatic compounds over simple carbon sources like glucose and glycerol and their co-metabolism with organic acids. Well-characterized growth conditions, aromatic compound metabolic pathways and their regulation, genome sequence, and advantageous eco-physiological traits (indole acetic acid production, alginate production, fusaric acid resistance, organic sulfur utilization, and siderophore production) make it an ideal host for metabolic engineering. Strain CSV86T was engineered for Carbaryl (1-naphthyl-N-methylcarbamate) degradation via salicylate-catechol route by expression of a Carbaryl hydrolase (CH) and a 1-naphthol 2-hydroxylase (1NH). Additionally, the engineered strain exhibited faster growth on Carbaryl upon expression of the McbT protein (encoded by the mcbT gene, a part of Carbaryl degradation upper operon of Pseudomonas sp. C5pp). Bioinformatic analyses predict McbT to be an outer membrane protein, and Carbaryl-dependent expression suggests its probable role in Carbaryl uptake. Enzyme activity and protein analyses suggested periplasmic localization of CH (carrying transmembrane domain plus signal peptide sequence at the N-terminus) and 1NH, enabling compartmentalization of the pathway. Enzyme activity, whole-cell oxygen uptake, spent media analyses, and qPCR results suggest that the engineered strain preferentially utilizes Carbaryl over glucose. The plasmid-encoded degradation property was stable for 75-90 generations even in the absence of selection pressure (kanamycin or Carbaryl). These results indicate the utility of P. bharatica CSV86T as a potential host for engineering various aromatic compound degradation pathways.IMPORTANCEThe current study describes engineering of Carbaryl metabolic pathway in Pseudomonas bharatica CSV86T. Carbaryl, a naphthalene-derived carbamate pesticide, is known to act as an endocrine disruptor, mutagen, cytotoxin, and carcinogen. Removal of xenobiotics from the environment using bioremediation faces challenges, such as slow degradation rates, instability of the degradation phenotype, and presence of simple carbon sources in the environment. The engineered CSV86-MEC2 overcomes these disadvantages as Carbaryl was degraded preferentially over glucose. Furthermore, the plasmid-borne degradation phenotype is stable, and presence of glucose and organic acids does not repress Carbaryl metabolism in the strain. The study suggests the role of outer membrane protein McbT in Carbaryl transport. This work highlights the suitability of P. bharatica CSV86T as an ideal host for engineering aromatic pollutant degradation pathways.

Indicator-enhanced starch-based intelligent film for nondestructive monitoring of beef freshness: Different structural phenolic acids copigment anthocyanin

Intelligent, non-destructive visual monitoring of food freshness is an emerging trend in intelligent food packaging in which highly sensitive, intelligent films are required to achieve monitoring accuracy. Hence, a highly sensitive, pH-responsive, intelligent indicator film for the real-time monitoring of beef freshness was prepared using phenolic acid-copigmented blueberry anthocyanin. UV-scanning spectroscopy confirmed that the phenolic acids exhibited colour-enhancing effects. The specific effect was different due to the different structures. The highest M value (97.98) demonstrated that ferulic acid with methoxylated has the strongest copigmentation effect. Degradation kinetics for the copigmentation of phenolic acids with anthocyanins proved that FA had the slowest degradation rate and the longest half-life (2.89 d/21.13 d) under both light and heating conditions. This proved that FA also had the best stabilizing effect on anthocyanin. FTIR demonstrated that the two bind by hydrogen bonding and π–π stacking interactions. The thermodynamic parameters revealed that different binding energies might be responsible for the differences in colour enhancement. The highest K (5.3672) and negative ΔG (−4.1631 kJ mol−1) provide theoretical support for the optimal copigmentation that can be produced by FA. The results of pH acid-base reversible responsiveness and stability tests show that FA enhanced the colour stability and indication response sensitivity of the intelligent film through copigmentation, and improved the visual identification. The film copigmented by FA was applied to beef monitoring results, which accurately identified sub-fresh portions, indistinguishable to the naked eye, where the beef was at a threshold of spoilage. Intelligent program application further standardises individual visual behaviours and improves film accuracy. This proved that ferulic acid improved the practical application value of the intelligent indicator film loaded with anthocyanin through copigmentation.

Early-life exposure to five biodegradable plastics impairs eye development and visually-mediated behavior through disturbing hypothalamus-pituitary-thyroid (HPT) axis in zebrafish larvae

Biodegradable plastics have been commonly developed and applied as an alternative to traditional plastics, which cause environmental plastic pollution. However, biodegradable plastics still present limitations such as stringent degradation conditions and slow degradation rate, and may cause harm to the environment and organisms. Consequently, in this study, zebrafish was used to evaluate the effects of five biodegradable microplastics (MPs), polyglycolic acid (PGA), polylactic acid (PLA), polybutylene succinate (PBS), polyhydroxyalkanoate (PHA) and polybutylene adipate terephthalate (PBAT) exposure on the early development, retina morphology, visually-mediated behavior, and thyroid signaling at concentrations of 1 mg/L and 100 mg/L. The results indicated that all MPs induced decreased survival rate, reduced body length, smaller eyes, and smaller heads, affecting the early development of zebrafish larvae. Moreover, the thickness of retinal layers, including inner plexiform layer (IPL), outer nuclear layer (ONL), and retinal ganglion layer (RGL) was decreased, and the expression of key genes related to eye and retinal development was abnormally altered after all MPs exposure. Exposure to PBS and PBAT led to abnormal visually-mediated behavior, indicating likely affected the visual function. All MPs could also cause thyroid system disorders, among which alterations in the thyroid hormone receptors (TRs) genes could affect the retinal development of zebrafish larvae. In summary, biodegradable MPs exhibited eye developmental toxicity and likely impaired the visual function in zebrafish larvae. This provided new evidence for revealing the effects of biodegradable plastics on aquatic organism development and environmental risks to aquatic ecosystems.

Permselectivity of Silk Fibroin Hydrogels for Advanced Drug Delivery Neurotherapies.

A promising trend in tissue engineering is using biomaterials to improve the control of drug concentration in targeted tissue. These vehicular systems are of specific interest when the required treatment time window is higher than the stability of therapeutic molecules in the body. Herein, the capacity of silk fibroin hydrogels to release different molecules and drugs in a sustained manner was evaluated. We found that a biomaterial format, obtained by an entirely aqueous-based process, could release molecules of variable molecular weight and charge with a preferential delivery of negatively charged molecules. Although the theoretical modeling suggested that drug delivery was more likely to be driven by Fickian diffusion, the external media had a considerable influence on the release, with lipophilic organic solvents such as acetonitrile-methanol (ACN-MeOH) intensifying the release of hydrophobic molecules. Second, we found that silk fibroin could be used as a vehicular system to treat a variety of brain disorders as this biomaterial sustained the release of different factors with neurotrophic (brain-derived neurotrophic factor) (BDNF), chemoattractant (C-X-C motif chemokine 12) (CXCL12), anti-inflammatory (TGF-β-1), and angiogenic (VEGF) capacities. Finally, we demonstrated that this biomaterial hydrogel could release cholesteronitrone ISQ201, a nitrone with antioxidant capacity, showing neuroprotective activity in an in vitro model of ischemia-reoxygenation. Given the slow degradation rate shown by silk fibroin in many biological tissues, including the nervous system, our study expands the restricted list of drug delivery-based biomaterial systems with therapeutic capacity for both short- and especially long-term treatment windows and has merit for use with brain pathologies.

Characterization of Potential Plastic-Degradation Enzymes from Marine Bacteria.

Polyethylene terephthalate (PET) and polyethylene (PE) are prominent polymer materials that comprise a significant portion of commercial plastic waste. Their durability and slow degradation rate have resulted in significant accumulation of plastic on Earth. In a recent study, macrotranscriptomic profiling of a reconstituted marine bacterial community identified 10 putative enzymes capable of directly acting on PE or PET (PEases or PETases). Among these enzymes, three recombinant proteins were reported to possess PE degradation activity. To select potential plastic degrading enzyme candidates for protein engineering efforts, we expressed and purified eight out of the 10 candidates, excluding two due to poor expression and/or solubility. Notably, several candidate proteins displayed significant esterase activity on p-nitrophenyl butyrate and exhibited unexpected thermostability despite their marine origin. Additionally, we observed dose- and time-dependent hydrolytic activity on the PET trimer substrate. Structural analysis and mutagenesis of a candidate protein confirmed the presence of catalytic triad residues, classifying it as an esterase. Furthermore, we elucidated the structural importance of the two disulfide bonds. Through point mutation experiments, we observed an enhanced hydrolytic activity of a selected enzyme candidate on PET nanoparticles. Our findings challenge the classification of the enzymes directly acting on PE and highlight the significance and complexity of validating PE degradation enzymes identified through metagenomic analysis.

The mechanism of gold nanoparticle-enhanced corrosion acceleration of polylactide (PLA)-coated biodegradable iron and zinc

The commercial application of biodegradable metals (BMs), such as iron (Fe) and zinc (Zn), is hampered by their slow degradation rate. Polylactide (PLA) coatings on BMs have been proven to accelerate the corrosion of Fe and Zn but with limited success. This is the first study exploring the use of gold nanoparticles (Au NPs) to enhance and control the corrosion of polylactide (PLA)-coated Fe and Zn. The Au NPs enhanced the corrosion rate of Fe and Zn by promoting micro-galvanic corrosion after nanoparticle agglomeration. The optimal corrosion acceleration depended on the polymer's molecular weight, coating thickness, and coating structure. The results suggest that the Au-reinforced PLA-based coatings can be used to control Fe and Zn corrosion rates in the physiological environment.

Study of the effect of magnetic fields on static degradation of Fe and Fe-12Mn-1.2C in balanced salts modified Hanks’ solution

Iron and its alloys are attractive as biodegradable materials because of their low toxicity and suitable mechanical properties; however, they generally have a slow degradation rate. Given that corrosion is an electrochemical phenomenon where an exchange of electrons takes place, the application of magnetic fields from outside the body may accelerate the degradation of a ferrous temporary implant. In the present study, we have investigated the effect of alternating and direct low magnetic field (H = 6.5 kA/m) on the corrosion process of pure iron (Fe) and an iron-manganese alloy (FeMnC) in modified Hanks' solution. A 14-day static immersion test was performed on the materials. The corrosion rate was assessed by mass and cross-sectional loss measurements, scanning electron microscopy, X-ray diffractometry, Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy before and after degradation. The results show that the presence of magnetic fields significantly accelerates the degradation rate of both materials, with the corrosion rate being twice as high in the case of Fe and almost three times as high for FeMnC. In addition, a homogenous degradation layer is formed over the entire surface and the chemical composition of the degradation products is the same regardless of the presence of a magnetic field.

Collagen-β-cyclodextrin hydrogels for advanced wound dressings: super-swelling, antibacterial action, inflammation modulation, and controlled drug release

A key strategy in enhancing the efficacy of collagen-based hydrogels involves incorporating polysaccharides, which have shown great promise for wound healing. In this study, semi-interpenetrating polymeric network (semi-IPN) hydrogels comprised of collagen (Col) with the macrocyclic oligosaccharide β-cyclodextrin (β-CD) (20–80 wt.%) were synthesised. Fourier-transform infrared (FTIR) spectroscopy confirmed the successful fabrication of these Col/β-CD hydrogels, evidenced by the presence of characteristic absorption bands, including the urea bond band at ∼1740 cm−1, related with collagen crosslinking. Higher β-CD content was associated with increased crosslinking, higher swelling, and faster gelation. The β-CD content directly influenced the morphology and semi-crystallinity. All Col/β-CD hydrogels displayed superabsorbent properties, enhanced thermal stability, and exhibited slow degradation rates. Mechanical properties were significantly improved with contents higher than β-CD 40 wt.%. These hydrogels inhibited the growth of Escherichia coli bacteria and facilitated the controlled release of agents, such as malachite green, methylene blue, and ketorolac. The chemical composition of the Col/β-CD hydrogels did not induce cytotoxic effects on monocytes and fibroblast cells. Instead, they actively promoted cellular metabolic activity, encouraging cell growth and proliferation. Moreover, cell signalling modulation was observed, leading to changes in the expression of TNF-α and IL-10 cytokines. In summary, the results of this research indicate that these novel hydrogels possess multifunctional characteristics, including biocompatibility, super-swelling capacity, good thermal, hydrolytic, and enzymatic degradation resistance, antibacterial activity, inflammation modulation, and the ability to be used for controlled delivery of therapeutic agents, indicating high potential for application in advanced wound dressings.

Effect of the phosphate and mineralogical composition on the movement and mineralization of glyphosate in clay soils

Glyphosate is one of the most used herbicides worldwide. In rice paddy fields, it is usually applied for weed control during the pre-planting stage. Phosphate fertilizers may enhance herbicide displacement in the soil matrix. The objective of this study was to assess the effect of monoamoniun phosphate and the mineralogical composition on the movement and mineralization of glyphosate in clay soils (CS1; CS2 and CS3) in Colombia. Glyphosate miscible displacement experiments were performed in disturbed soil columns, with and without the addition of phosphate after the application of a pulse of N-(phosphonomethyl-14C) glycine. Simultaneously, 14C-glyphosate mineralization was measured indirectly by quantifying the amount 14C–CO2 released daily. At the end of the experiment, the columns were divided into six horizontal sections and glyphosate-bound residues were determined in the soil. The addition of phosphate decreased glyphosate retention time (in CS1 and CS2) and increased the total leached amount only in CS1 soil. Overall, more than 95% of the applied glyphosate was retained in the soil columns. Glyphosate mineralization half-life adjusted to a bi-exponential model, implying that one fraction degrades rapidly due to being more bioavailable, and the other fraction presents a slow rate of degradation and, that although high contents of kaolinite clays are important in the adsorption and translocation of the herbicide, the presence of calcites and divalent cations modify this process, favoring the persistence of the molecule in the soil. Glyphosate partitions into an easily degradable fraction and a more recalcitrant fraction adsorbed to kaolinite clays, calcites, and divalent cations. This fraction is less available for biodegradation thus favoring glyphosate persistence in soil.

FeMnCSi alloy for degradable pin implants: Surface and in vitro characterization

Biodegradable metals such iron-based materials, are studied as temporary implants in the orthopedic field due to their adequate mechanical properties, non-toxic degradation products, and the possibility of avoiding a second surgical intervention to remove the device. One strategy to overcome the slow degradation rate of pure Fe is the addition of alloying elements. The aim of this work is to characterize the in vitro behavior of a new FeMnCSi alloy (Fe 26.5Mn 0.5C 1.14Si 0.03P 0.01S), and compare it with the performance of pure iron in simulated body fluid. The alloy performance was characterized in terms of chemical composition, microstructure, hemocompatibility and electrochemical responseIt has been found that FeMnCSi alloy presented a marked and progressive degradation in simulated body fluid after 14 days of immersion, significantly larger than pure Fe. The presence of phosphate-based compounds was confirmed on the surface of the alloy after 1 day of immersion while only after 14 days of immersion was detected on Fe. Additionally, the FeMnCSi alloy demonstrates improved blood compatibility compared to pure iron, indicating its suitability for applications in irrigated areas such as bones.

Injectable and high-strength PLGA/CPC loaded ALN/MgO bone cement for bone regeneration by facilitating osteogenesis and inhibiting osteoclastogenesis in osteoporotic bone defects

Osteoporosis (OP) can result in slower bone regeneration than the normal condition due to the imbalance between osteogenesis and osteoclastogenesis, making osteoporotic bone defects healing a significant clinical challenge. Calcium phosphate cement (CPC) is a promising bone substitute material due to its good osteoinductive activity, however, the drawbacks such as fragility, slow degradation rate and incapability to control bone loss restrict its application in osteoporotic bone defects treatment. Currently, we developed the PLGA electrospun nanofiber sheets to carry alendronate (ALN) and magnesium oxide nanoparticle (nMgO) into CPC, therefore, to obtain a high-strength bone cement (C/AM-PL/C). The C/AM-PL/C bone cement had high mechanical strength, anti-washout ability, good injection performance and drug sustained release capacity. More importantly, the C/AM-PL/C cement promoted the osteogenic differentiation of bone marrow mesenchymal stem cells and neovascularization via the release of Mg2+ (from nMgO) and Ca2+ (during the degradation of CPC), and inhibited osteoclastogenesis via the release of ALN in vitro. Moreover, the injection of C/AM-PL/C cement significantly improved bone healing in an OP model with femur condyle defects in vivo. Altogether, the injectable C/AM-PL/C cement could facilitate osteoporotic bone regeneration, demonstrating its capacity as a promising candidate for treatment of osteoporotic bone defects.