Slow Phase Research Articles

The Utility of Contrast-Enhanced Ultrasound (CEUS) in Assessing the Risk of Malignancy in Thyroid Nodules.

Ultrasonography is a primary method used in the evaluation of thyroid nodules, but no single feature of this method predicts malignancy with high accuracy. Therefore, this paper aims to assess the utility of contrast-enhanced ultrasound (CEUS) in the differential diagnosis of thyroid nodules. The study group comprised 188 adult patients (155 women and 33 men) who preoperatively underwent CEUS of a thyroid nodule classified as Bethesda categories II-VI after fine-needle aspiration biopsy. During the CEUS examination, 1.5 mL of SonoVue contrast was injected intravenously, after which 15 qualitative CEUS enhancement patterns were analysed. The histopathologic results comprised 65 benign thyroid nodules and 123 thyroid carcinomas. The dominant malignant CEUS features, such as hypo- and heterogeneous enhancement and slow wash-in phase, were evaluated, whereas high enhancement, ring enhancement, and a slow wash-out phase were assessed as predictors of benign lesions. Two significant combinations of B-mode and CEUS patterns were noted, namely, hypoechogenicity with heterogeneous enhancement and non-smooth margins with hypo- or iso-enhancement. The preliminary results indicate that CEUS is a useful tool in assessing the risk of malignancy of thyroid lesions. The combination of the qualitative enhancement parameters and B-mode sonographic features significantly increases the method's usefulness.

Temperature compensation through kinetic regulation in biochemical oscillators

Nearly all circadian clocks maintain a period that is insensitive to temperature changes, a phenomenon known as temperature compensation (TC). Yet, it is unclear whether there is any common feature among different systems that exhibit TC. From a general timescale invariance, we show that TC relies on the existence of certain period-lengthening reactions wherein the period of the system increases strongly with the rates in these reactions. By studying several generic oscillator models, we show that this counterintuitive dependence is nonetheless a common feature of oscillators in the nonlinear (far-from-onset) regime where the oscillation can be separated into fast and slow phases. The increase of the period with the period-lengthening reaction rates occurs when the amplitude of the slow phase in the oscillation increases with these rates while the progression speed in the slow phase is controlled by other rates of the system. The positive dependence of the period on the period-lengthening rates balances its inverse dependence on other kinetic rates in the system, which gives rise to robust TC in a wide range of parameters. We demonstrate the existence of such period-lengthening reactions and their relevance for TC in all four model systems we considered. Theoretical results for a model of the Kai system are supported by experimental data. A study of the energy dissipation also shows that better TC performance requires higher energy consumption. Our study unveils a general mechanism by which a biochemical oscillator achieves TC by operating in parameter regimes far from the onset where period-lengthening reactions exist.

Dramatically Accelerating II-I Crystal Phase Transition of Polybutene‑1 by In Situ Incorporation of H-Shape Long-Chain-Branching Structures.

This communication reports an effective strategy helping address the long-troubling melt processing issue of isotactic polybutene-1 (i-PB) caused by its extremely slow II-I crystal phase transition. The solution lies in a facile synthesis of i-PB containing H-shape long-chain-branching structures (LCB-i-PB) by applying a so-called ω-alkenylmethyldichlorosilane copolymerization-hydrolysis (ACH) chemistry to butene-1 polymerization with Ziegler-Natta or metallocene catalysts. It is evident that the H-shape LCB structures effectively enhance chain entanglements of i-PB and induce an over-the-board acceleration of the overall melt crystallization process including nucleation, form II crystallization, and form II-form I phase transition. As i-PB usually requires up to a week to reach equilibrium of the II-I phase transition, it is found that with LCB-i-PB such a transition is almost finished within as short as 24 h to even higher degrees.

Miniaturized leaky-wave antenna with backward-to-forward beam scanning and suppressed open stop-band based on substrate-integrated plasmonic waveguide

This work presents a theoretical design and experimental demonstration of a novel miniaturized leaky-wave antenna (LWA) using composite waveguide based on substrate-integrated plasmonic waveguide (SIPW). The SIPW is designed by embedding hybrid dual spoof surface plasmon polariton (SSPP) structure into a three-layer substrate integrated waveguide (SIW). Due to the slow-wave effect of SIPW, the proposed miniaturized composite waveguide forms slowed phase velocity and decreased lower cutoff frequency. To excite backward-to-forward beam scanning mode and suppress the open stop-band, an asymmetric sinusoidal modulated structure is introduced to the surface of the composite waveguide. The experimental results indicate that the proposed SIPW-based LWA can achieve continuous beam scanning from the backward to the forward direction within the bandwidth of 10.6-13.7 GHz, passing through the broadside at 11.6 GHz.

Physical insight into turn‐on transient of silicon carbide gate turn‐off thyristor

AbstractSilicon Carbide (SiC) Gate Turn‐off (GTO) thyristor is regarded as a promising option for pulsed power applications; however, the formation of high di/dt has been constrained by the slow current rise transient phase and the turn‐on current heterogeneity over the chip device. In this paper, a practical integrated multi‐cell simulation is performed to physically characterize the turn‐on transient of SiC GTO thyristor. Through examining electrical coupling between adjacent cells caused by both parasitics of electrode metallization and carrier travelling via SiC, the current distributions are observed, and the carrier transport dynamics are analyzed in detail. Furthermore, physical mechanisms dominating the current heterogeneity among multi‐cells are discovered in depth. It is revealed that the current heterogeneity during the turn‐on transient is primarily resulted from the Gate signal delay caused by the Gate Runner metallization, and the lateral interaction from adjacent semiconductor regions adds to this inhomogeneity; however, this situation can be improved once the electrical distance between each Anode contact and the Anode electrode gets lowered. Design method for turn‐on performance improvement is also proposed accordingly. Besides, based on the analysis conducted on the multi‐cell simulation results, the possible reason of the extremely slow current rise transient phase is speculated and experimentally verified. The improvement in the comprehension of SiC GTO's turn‐on transient, which cannot be obtained from the traditional investigation from the viewpoint of one elementary cell, will provide guiding principles helping in directing future efforts to advance the improvement of device design technology.

Multi-heterostructured MXene/NiS2/Co3S4 with S-Vacancies to Promote Polysulfide Conversion in Lithium-Sulfur Batteries.

The severe shuttle effect of polysulfides (LiPSs) and the slow liquid-solid phase conversion are the main obstacles hindering the practical application of lithium-sulfur (Li-S) batteries. Separator modification with a high-activity catalyst can boost LiPSs conversion and suppress their shuttle effect. In this work, multi-heterostructured MXene/NiS2/Co3S4 with rich S-vacancies was constructed facilely with a hydrothermal and high-temperature annealing strategy for separator modification. The MXene sheet not only provides a physical barrier but also ensures a high conductivity and adsorption capacity of the catalyst; the dual active centers of NiS2 and Co3S4 catalyze LiPSs conversion. In addition, the vacancies and heterostructures can modulate the electronic structure of the catalyst, improve its intrinsic activity, and reduce the polysulfides reaction barrier, thus facilitating ion/electron transport and inhibiting the shuttle effect. Benefiting from these advantages, the Li-S battery with MXene/NiS2/Co3S4 modified separator exhibits exciting discharge capacities (1495.4 mAh g-1 at 0.1C and 549.0 mAh g-1 at 6C) and an excellent ultra-long cycle life (average capacity decay rate of 0.026% for 2000 cycles at 2C); at a high sulfur loading of 10.0 mg cm-2, the battery operates for nearly 80 cycles at 0.2C, giving a capacity retention rate of 75.76%. This work provides a high-activity catalyst for Li-S batteries.

Study on the Failure Process and Acoustic Emission Characteristics of Freeze–Thawed Sandstone under Cyclic Loading and Unloading

In order to investigate freeze–thawed red sandstone failure processes under cyclic loading and unloading conditions, real-time acoustic emission (AE) and scanning electron microscopy (SEM) techniques were used to reveal the fracture process of the saturated red sandstone after cyclic loading and unloading tests using uniaxial compression. The results show that the stress–strain curves of the freeze–thawed sandstones show signs of hysteresis and exhibit a two-stage evolution of “sparse → dense”. In the cyclic loading and unloading process, the modulus of elasticity in the loading process is always larger than that in the unloading process, while the Poisson’s ratio is the opposite, and the radial irreversible strain and cumulative irreversible strain are larger than those in the axial direction. As the number of freeze–thaw cycles increases, the rock specimens need more cycles of loading and unloading to make the crack volume compressive strain Δεcv+ reach the maximum value and tend to stabilize, while the crack volume extensional strain Δεcv− tends to decrease gradually. This study also shows that the growth phase of the cyclic loading and unloading process has more ringing counts and a shorter duration, while the slow degradation phase has more ringing counts with loading and less with unloading. In addition, the F-T cycle gradually changes the internal microcracks of the red sandstone from shear damage, which is dominated by shear cracks, to tensile damage, which is dominated by tensile cracks. This study’s findings contribute to our knowledge of the mechanical characteristics and sandstone’s degradation process following F-T treatment, and also serve as a guide for engineering stability analyses conducted in the presence of multiphysical field coupling.

Vestibular Hypofunction Screening in Older Cochlear Implant Candidates.

Vestibular loss is associated with increasing age and hearing loss. Cochlear implantation (CI) may be performed in these patients; however, CI can induce vestibular hypofunction (VH) postoperatively. If CI is performed in the "better balancing ear," patients may experience vestibulopathy from new bilateral VH. The objective of this study was to evaluate the rates of VH in older CI candidates, thereby helping to identify patients at increased risk for bilateral VH after CI. Retrospective cohort study from 2019 to 2022 of patients age 60 to 80 years old who underwent videonystagmography (VNG). Tertiary care neurotology practice. VNG, including spontaneous nystagmus, cervical vestibular evoked myogenic potential (cVEMP), caloric stimulation, and rotary chair, was reviewed and stratified by CI candidacy. Patients with prior CI or known vestibular diagnosis were excluded. Thirty-three patients were CI candidates and 184 patients were controls. cVEMP demonstrated a significantly greater rate of unilateral VH in CI candidates (P = .018). Caloric stimulation demonstrated an elevated rate of bilateral VH and presbyvestibulopathy in CI candidates (P = .057 and P = .036, respectively). Rotary chair demonstrated a significantly higher rate of bilateral VH and incomplete vestibular compensation based on reduced gain and gain asymmetry, respectively, in CI candidates (P < .001 and P = .043, respectively). Mean bithermal slow phase velocity sum and rotary chair gain were significantly lower in the CI candidate group (P = .002 and P < .001, respectively). Preoperative identification of VH determined the side of implantation in 4 patients (15%). VH and incomplete vestibular compensation are common and more frequently seen in CI candidates compared to age-matched controls. Vestibular screening can play a role in surgical counseling and planning, and should be considered in older patients undergoing CI.

Proton Domino Reactions at an Imidazole Relay Control the Oxidation of a TyrZ-His190 Artificial Mimic of Photosystem II.

A close mimic of P680 and the TyrosineZ-Histidine190 pair in photosystem II (PS II) has been synthesized using a ruthenium chromophore and imidazole-phenol ligands. The intramolecular oxidation of the ligands by the photoproduced Ru(III) species is characterized by a small driving force, very similar to PS II where the complexity of kinetics was attributed to the reversibility of electron transfer steps. Laser flash photolysis revealed biphasic kinetics for ligand oxidation. The fast phase (τ < 50 ns) corresponds to partial oxidation of the imidazole-phenol ligand, proton transfer within the hydrogen bond, and formation of a neutral phenoxyl radical. The slow phase (5 - 9 µs) corresponds to full oxidation of the ligand which is kinetically controlled by deprotonation of the distant 1-nitrogen of the imidazolium. These results show that imidazole with its two protonatable sites plays a special role as a proton relay in a 'proton domino' reaction.

Unveiling the Initiation Route of Coronal Mass Ejections through Their Slow Rise Phase

Understanding the early evolution of coronal mass ejections (CMEs), in particular their initiation, is the key to forecasting solar eruptions and induced disastrous space weather. Although many initiation mechanisms have been proposed, a full understanding of CME initiation, which is identified as a slow rise of CME progenitors in kinematics before impulsive acceleration, remains elusive. Here, with a state-of-the-art thermal magnetohydrodynamics simulation, we determine a complete CME initiation route in which multiple mainstream mechanisms occur in sequence yet are tightly coupled. The slow rise is first triggered and driven by the developing hyperbolic flux tube (HFT) reconnection. Subsequently, the slow rise continues as driven by the coupling of the HFT reconnection and the early development of torus instability. The end of the slow rise, i.e., the onset of the impulsive acceleration, is induced by the start of the fast magnetic reconnection coupled with the torus instability. These results unveil that CME initiation is a complicated process involving multiple physical mechanisms, thus being hardly resolved by a single initiation mechanism.

Naked Forward Shock Seen in the TeV Afterglow Data of GRB 221009A

We explore the implications of the light curve of the early TeV gamma-ray afterglow of GRB 221009A reported by the LHAASO Collaboration. We show that the reported offset of the reference time, T *, allows the determination of the activation time of the main jet component, which occurs approximately 200 s after the Gamma-ray Burst Monitor (GBM) trigger time and closely precedes the moment at which GBM was saturated. We find that while the LHAASO data do not exclude the homogeneous circumburst medium scenario, the progenitor wind scenario looks preferable, finding excellent agreement with the expected size of the stellar bubble. We conclude that the initial growth of the light curve is dominated by processes internal to the jet or by gamma-gamma attenuation on the photons emitted during the prompt phase. Namely, either the activation of the acceleration process or the decrease of internal gamma-gamma absorption can naturally explain the initial rapid flux increase. The subsequent slow flux growth phase observed up to T * + 18 s can be related to the process of particle accumulation in the production region. The duration of this phase allows an almost parameter-independent determination of the jet’s initial Lorentz factor, Γ0 ≈ 600, and magnetic field strength, B′∼0.3G . These values appear to match well those previously revealed through spectral modeling of the GRB emission.

Exploration of the Effects of Cadmium Stress on Photosynthesis in Oenanthe javanica (Blume) DC.

Cadmium ion (Cd2+) stress is a major abiotic stressor affecting plant photosynthesis. However, the impact of sustained high-concentration Cd stress on the photosynthetic electron transport chain of aquatic plants is currently unclear. Here, prompt fluorescence (PF), delayed fluorescence (DF), and P700 signals were simultaneously measured to investigate the effect of Cd stress on photosynthesis in water dropwort [Oenanthe javanica (Blume) DC.]. We aimed to elucidate how Cd stress continuously affects the electron transport chain in this species. The PF analysis showed that with prolonged Cd stress, the FJ, FI and FP steadily decreased, accompanied by a positive shift in the K-band and L-band. Moreover, JIP-test parameters, including TRO/ABS, ABS/CSO, TRO/CSO and PIABS, were significantly reduced. The P700 signals showed that exposure to Cd stress hindered both the fast decrease and slow increase phases of the MR transient, ultimately resulting in a gradual reduction in both VPSI and VPSII-PSI. The DF analysis showed a gradual decrease in the I1 and I2 values as the duration of stress from Cd increased. The above results suggested that Cd stress affected the photosynthetic electron transport in water dropwort by influencing the amount of active PSII and PSI, primarily affecting PSII RCs in the early to mid-stages and PSI reductive activity in the later stage.

Effect of daridorexant on sleep architecture in patients with chronic insomnia disorder - A pooled post hoc analysis of two randomized Phase 3 clinical studies.

Post-hoc analysis to evaluate the effect of daridorexant on sleep architecture in people with insomnia, focusing on features associated with hyperarousal. We studied sleep architecture in adults with chronic insomnia disorder from two randomized Phase 3 clinical studies (Clinicaltrials.gov: NCT03545191 and NCT03575104) investigating 3 months of daridorexant treatment (placebo, daridorexant 25mg, daridorexant 50mg). We analyzed sleep-wake transition probabilities, EEG spectra and sleep spindle properties including density, dispersion, and slow oscillation phase coupling. The Wake EEG Similarity Index (WESI) was determined using a machine learning algorithm analyzing the spectral profile of the EEG. At Month 3, daridorexant 50mg decreased Wake-to-Wake transition probabilities (P<0.05) and increased the probability of transitions from Wake-to-N1 (P<0.05), N2 (P<0.05), and REM sleep (P<0.05), as well as from N1-to-N2 (P<0.05) compared to baseline and placebo. Daridorexant 50mg decreased relative beta power during Wake (P=0.011) and N1 (P<0.001) compared to baseline and placebo. During Wake, relative alpha power decreased (P<0.001) and relative delta power increased (P<0.001) compared to placebo. Daridorexant did not alter EEG spectra bands in N2, N3, and REM stages or in sleep spindle activity. Daridorexant decreased the WESI score during Wake compared to baseline (P=0.004). Effects with 50mg were consistent between Month 1 and Month 3 and less pronounced with 25mg. Daridorexant reduced EEG features associated with hyperarousal as indicated by reduced Wake-to-Wake transition probabilities and enhanced spectral features associated with drowsiness and sleep during Wake and N1.

A customizable cam-typed bistable nonlinear energy sink

A novel cam-typed bistable nonlinear energy sink (CBNES) is first proposed in this paper. The CBNES achieves a customized design of the ideal configuration of BNES by introducing a cam-roller-spring negative stiffness mechanism (CRS-NSM). The design criteria for continuous and smooth bistable cam profiles are studied, and the extreme values of dimensionless stiffness and pre-compression are predicted. Furthermore, the periodic and quasi-periodic dynamics of the system are studied by using the complexification-averaging (CA-X) method. By combining Slow Invariant Manifold (SIM) and phase trajectory, the energy dissipations of different response types of the CBNES are predicted. The SMR and chaotic response have the best and lowest targeted energy transfer (TET) efficiency, respectively. The saddle-node (S-N) and Holf bifurcation characteristics of the periodic fixed points are analyzed to predict the possibility of SMR occurrence. The analysis of the amplitude frequency curve with the variation of system parameters indicates that weak negative stiffness and intermediate cubic stiffness are more beneficial to vibration suppression. The highlight is that the excitation thresholds of SMR are predicted by using analytical and numerical methods, and the influences of system parameters on the thresholds are analyzed. The deviation between the analytical and numerical results will decrease with increasing damping. Finally, the correctness of the analytical results is verified through a series of fixed-frequency experiments. The proposed CBNES provides a valuable potential solution for designing efficient and robust mechanical BNES physical implementations.

Distribution and recovery phase of geomagnetic storms during solar cycles 23 and 24

Abstract Coronal mass ejections (CMEs) and Stream Interaction Regions (SIRs) are the main drivers of intense geomagnetic storms. We study the distribution of geomagnetic storms associated with different drivers during solar cycles 23 and 24 (1996-2019). Although the annual occurrence rate of geomagnetic storms in both cycles tracks the sunspot cycle, the second peak in storm activity lags the second sunspot peak. SIRs contribute significantly to the second peak in storm numbers in both cycles, particularly for moderate to stronger-than-moderate storms. We note semiannual peaks in storm numbers much closer to equinoxes for moderate storms, and slightly shifted from equinoxes for intense and stronger-than-intense storms. We note a significant fraction of multiple-peak storms in both cycles due to isolated ICMEs/SIRs, while single-peak storms from multiple interacting drivers, suggesting a complex relationship between storm steps and their drivers. Our study focuses on investigating the recovery phases of geomagnetic storms and examining their dependencies on various storm parameters. Multiple-peak storms in both cycles have recovery phase duration strongly influenced by slow and fast decay phases with no correlation with the main phase buildup rate and Dst peak. However, the recovery phase in single-peak storms for both cycles depends to some extent on the main phase buildup rate and Dst peak, in addition to slow and fast decay phases. Future research should explore recovery phases of single and multiple-peak storms incorporating in-situ solar wind observations for a deeper understanding of storm evolution and decay processes.

Modulate the impact of the drowsiness on the resting state functional connectivity.

This research explores different methodologies to modulate the effects of drowsiness on functional connectivity (FC) during resting-state functional magnetic resonance imaging (RS-fMRI). The study utilized a cohort of students (MRi-Share) and classified individuals into drowsy, alert, and mixed/undetermined states based on observed respiratory oscillations. We analyzed the FC group difference between drowsy and alert individuals after five different processing methods: the reference method, two based on physiological and a global signal regression of the BOLD time series signal, and two based on Gaussian standardizations of the FC distribution. According to the reference method, drowsy individuals exhibit higher cortico-cortical FC than alert individuals. First, we demonstrated that each method reduced the differences between drowsy and alert states. The second result is that the global signal regression was quantitively the most effective, minimizing significant FC differences to only 3.3% of the total FCs. However, one should consider the risks of overcorrection often associated with this methodology. Therefore, choosing a less aggressive form of regression, such as the physiological method or Gaussian-based approaches, might be a more cautious approach. Third and last, using the Gaussian-based methods, cortico-subcortical and intra-default mode network (DMN) FCs were significantly greater in alert than drowsy subjects. These findings bear resemblance to the anticipated patterns during the onset of sleep, where the cortex isolates itself to assist in transitioning into deeper slow wave sleep phases, simultaneously disconnecting the DMN.

A Proposed Mechanism for Visual Vertigo: Post-Concussion Patients Have Higher Gain From Visual Input Into Subcortical Gaze Stabilization.

Post-concussion syndrome (PCS) is commonly associated with dizziness and visual motion sensitivity. This case-control study set out to explore altered motion processing in PCS by measuring gaze stabilization as a reflection of the capacity of the brain to integrate motion, and it aimed to uncover mechanisms of injury where invasive subcortical recordings are not feasible. A total of 554 eye movements were analyzed in 10 PCS patients and nine healthy controls across 171 trials. Optokinetic and vestibulo-ocular reflexes were recorded using a head-mounted eye tracker while participants were exposed to visual, vestibular, and visuo-vestibular motion stimulations in the roll plane. Torsional and vergence eye movements were analyzed in terms of slow-phase velocities, gain, nystagmus frequency, and sensory-specific contributions toward gaze stabilization. Participants expressed eye-movement responses consistent with expected gaze stabilization; slow phases were fastest for visuo-vestibular trials and slowest for visual stimulations (P < 0.001) and increased with stimulus acceleration (P < 0.001). Concussed patients demonstrated increased gain from visual input to gaze stabilization (P = 0.005), faster slow phases (P = 0.013), earlier nystagmus beats (P = 0.003), and higher relative visual influence over the gaze-stabilizing response (P = 0.001), presenting robust effect sizes despite the limited population size. The enhanced neural responsiveness to visual motion in PCS, combined with semi-intact visuo-vestibular integration, presented a subcortical hierarchy for altered gaze stabilization. Drawing on comparable animal trials, findings suggest that concussed patients may suffer from diffuse injuries to inhibiting pathways for optokinetic information, likely early in the visuo-vestibular hierarchy of sensorimotor integration. These findings offer context for common but elusive symptoms, presenting a neurological explanation for motion sensitivity and visual vertigo in PCS.

PyOKR: A Semi-Automated Method for Quantifying Optokinetic Reflex Tracking Ability.

The study of behavioral responses to visual stimuli is a key component of understanding visual system function. One notable response is the optokinetic reflex (OKR), a highly conserved innate behavior necessary for image stabilization on the retina. The OKR provides a robust readout of image tracking ability and has been extensively studied to understand visual system circuitry and function in animals from different genetic backgrounds. The OKR consists of two phases: a slow tracking phase as the eye follows a stimulus to the edge of the visual plane and a compensatory fast phase saccade that resets the position of the eye in the orbit. Previous methods of tracking gain quantification, although reliable, are labor intensive and can be subjective or arbitrarily derived. To obtain more rapid and reproducible quantification of eye tracking ability, we have developed a novelsemi-automated analysis program, PyOKR, that allows for quantification of two-dimensional eye tracking motion in response to any directional stimulus, in addition to being adaptable to any type of video-oculography equipment. This method provides automated filtering, selection of slow tracking phases, modeling of vertical and horizontal eye vectors, quantification of eye movement gains relative to stimulus speed, and organization of resultant data into a usable spreadsheet for statistical and graphical comparisons. This quantitative and streamlined analysis pipeline, readily accessible via PyPI import, provides a fast and direct measurement of OKR responses, thereby facilitating the study of visual behavioral responses.

Atomistic Simulation Study of Grain Boundary Segregation and Grain Boundary Migration in Ni-Cr Alloys

Using Molecular Dynamics (MD) and Monte Carlo (MC) simulations, we studied the grain boundary (GB) segregation under different temperatures and Cr concentrations in Ni-Cr alloys with two distinct grain-boundary structures, i.e., Σ5(310)[010] and Σ101(200)[100]. Temperature plays a minor influence on Cr segregation for Σ5(310)[010] GB, but Cr segregation rapidly diminishes with elevating temperatures for Σ101(200)[100] GB. We also used the synthetic driving force and corresponding identification methods to investigate the effect of Cr solute segregation on grain boundary stability. All Σ5(310)[010] models have multi-stage grain boundary migration at 800 K. In the first stage, the grain boundary’s slow acceleration time is related to solute concentration. The migration temperature can influence this phenomenon. As temperatures rise, the duration of this slow acceleration phase diminishes. No similar phenomenon was observed in the process of the grain boundary movement of Σ101(200)[100]. The influence of solute concentration on grain boundary migration is complicated. The segregation concentration at the grain boundary cannot be regarded as the only factor affecting the migration of the grain boundary because the Cr atom on the grain boundary does not move with the grain boundary. This work will also discuss the grain boundary migration‘s relationship with lattice distortion and grain boundary atom diffusion. The results and findings of this study provide further insights into the segregation-increase GB stabilization of NC Ni-Cr alloys.

Achieving Ultrahigh Voltage Over 100 V and Remarkable Freshwater Harvesting Based on Thermodiffusion Enhanced Hydrovoltaic Generator

AbstractEvaporative hydrovoltaic generators hold significant potential for alleviating water‐energy crisis, but low output voltage configurations due to the slow phase transition rate of water molecules and the intricate nature of integration limit their applications. Herein, a lotus‐inspired interfacial evaporation‐driven hydrovoltaic generators (IEHVG) is developed for efficient generation of water vapor and electricity from seawater instead of freshwater and achieves an ultrahigh voltage output higher than 100‐volt level through forested IEHVG integration. The biomimetic hydrogel is developed with specific liquid transport channels, graphene quantum dots/MXene nanocomposites, and gradient hydrophobic interface for highly enhanced photothermal evaporation and electricity generation by mimicking the transpiration process of a “stems‐leaves of lotus”. The synergistic thermodiffusion effect leads to the output power density of IEHVG reaches up to 45.6 µW cm−2 and can power electronic devices or charge commercial supercapacitors. The freshwater‐electricity cogeneration integrated system consisting of 192 IEHVG units can harvest a record‐breaking voltage reaching 105 V and a high freshwater harvesting rate up to 2.0 L m−2 h−1 from seawater in a well‐lit outdoor area. This work demonstrates that IEHVG offers a novel concept for modular freshwater and high‐voltage power sources access on offshore work platforms.