Slippery Surfaces Research Articles

Functionalized porous 316 L stainless-steel with oil reservoir against ice adhesion

Slippery liquid-infused porous surfaces (SLIPSs) are used in anti-fouling, anti-icing and anti-corrosion, but lack of long-term durability is a challenge due to lubricant depletion. SLIPS with self-lubricating properties can achieve extended durability without reapplying the lubricant. Generally, lubricant is stored close to surface, thus lubricant reservoir is limited. Here bulk of porous material acts as lubricant reservoir in 316L stainless-steel SLIPS with self-lubricating properties for lowering ice adhesion. The reservoir was fabricated by using a space holder technique in metal injection molding (MIM) with lubricant reservoir volume up to 17.3%. Surface was activated with vinyltrimethoxysilane (VTMS) to attract lubricant. Ice adhesion strength was increased up to three times against non-porous reference in ice adhesion testing using porous surface without lubrication. The best performing SLIPS showed 6.7 times lower ice adhesion against counterpart porous surface without lubricant and 1.7 times lower than non-porous reference. This self-lubrication was achieved on mechanically durable structure having an adjustable lubricant storage capacity by temperature-driven phenomenon during de-icing.

Anticorrosion strategy for magnesium alloys through a superhydrophobic approach utilizing slippery liquid-infused porous surface coating

Anticorrosion strategy for magnesium alloys through a superhydrophobic approach utilizing slippery liquid-infused porous surface coating

Slippery Liquid-Infused Porous Surfaces Containing UiO-66 Incorporated with 8-Hydroxyquinoline for Excellent Corrosion Protection of AZ31 Mg Alloys.

The conventional slippery liquid-infused porous surfaces (SLIPSs) provide relatively limited corrosion protection and self-healing performance for AZ31 Mg alloys. To this end, 8-hydroxyquinoline (8-HQ) was incorporated into a zirconium-based metal-organic framework UiO-66 through coordination (8-HQ@UiO-66), which was then dispersed into silicone oil to fabricate nanoparticle-enhanced-SLIPSs (8-HQ@UiO-66-SLIPSs). Especially, the influences of 8-HQ@UiO-66 concentration on the surface morphology, surface hydrophobicity, and corrosion resistance were studied. It was found that the surface hydrophobicity first increased and then decreased with increasing concentration, showing the highest water contact angle of 121.2° at a concentration of 1 mg mL-1 (8-HQ@UiO-66-SLIPS-1). This was attributed to the development of well-constructed hierarchical micro/nanostructures. Moreover, it also exhibited the best anticorrosion property, with the lowest corrosion current density of 1.24 × 10-10 A cm-2 and the highest impedance modulus of 9.88 × 108 Ω cm2 at 0.01 Hz, primarily associated with the synergistic interaction of 8-HQ and UiO-66. Further, the self-healing performance was evaluated using the scanning vibration electrode technique (SVET), verifying the superior self-healing performance of 8-HQ@UiO-66-SLIPS-1. Hence, the nanoparticle-enhanced-SLIPSs exhibit considerable potential in the corrosion protection of Mg alloys, thereby accelerating their extensive applications in industry.

A Novel-Potential Wave-Bump Yarn of Plain Weave Fabric for Fog Harvesting

With the variety of fibers and fabrics, the studies of the surface structure of the textile yarns, the weave fabric, and their surface wettability are still potential factors to improve and optimize the fog harvesting efficiency. In this work, inspired by the fog harvesting behavior of the desert beetle dorsal surface, a wavy–bumpy structure of post-weave yarn (obtained from woven fabric) was reported to improve large droplet growth (converge) efficiency. In which, this study used tetrabutyl titanate (Ti(OC4H9)4) to waterproof, increase hydrophobicity, and stabilize the surface of yarns and fabric (inspired by the feather structure and lotus leaf surface). Moreover, PDMS oil was used (lubricated) to increase hydrophobicity and droplet shedding on the yarns (inspired by the slippery surface of the pitcher plant) and at the same time, enhance the fog harvesting efficiency of the warp yarn woven fabric (Warp@fabric). In addition, a three-dimensional adjacent yarn structure was arranged by two non-parallel fabric layers. The yarns of the inner and outer layers were intersected at an angle decreasing to zero (mimicking the water transport behavior of Shorebird’s beaks). This method helped large droplets quickly form and shed down easily. More than expected, the changes in fabric texture and fiber surface yielded an excellent result. The OBLWB-Warp@fabric’s water harvesting rate was about 700% higher than that of the original plain weave fabric (Original@fabric). OBLWB-Warp@fabric’s water harvesting rate was about 160% higher than that of Original–Warp@fabric. This shows the great practical application potential of woven fabrics with a low cost and large scale, or you can make use of textile wastes to collect fog, suitable for the current circular economy model. This study hopes to further enrich the materials used for fog harvesting.

Bionic Fluorine-Free Multifunctional Photothermal Surface for Anti/de/Driving-Icing and Droplet Manipulation.

Due to safety concerns associated with ice accumulation, there is a need to develop a durable surface with anti/de-icing properties. Inspired by Gecko skin and Nepenthes, a superhydrophobic photothermal surface (SH-PS) with micro-nano hierarchical structure based on carbon nanotube composites is prepared by one-step laser method. It can be switchable to a slippery photothermal surface (S-PS) by injecting silicone oil. S-PS can effectively delay icing at -20 °C/-30 °C, and maintain excellent dynamic anti-icing capabilities following 28 times supercooled droplet impact (-30 °C). Under near-infrared (NIR) irradiation, S-PS exhibits high-efficiency photothermal deicing and excellent ice droplet control capabilities. Furthermore, S-PS also exhibits remarkable droplet manipulation capabilities under NIR irradiation, even anti-gravity transport (8°) and programmable track manipulation. Notably, after 20m abrasion, the S-PS still maintains good performances of anti/de-icing and droplet manipulation after infusing lubricant. All these excellent performances can promote its application in a wider range of fields.

A Biomimetic Adhesive Disc for Robotic Adhesion Sliding Inspired by the Net-Winged Midge Larva.

Net-winged midge larvae (Blephariceridae) are known for their remarkable ability to adhere to and crawl on the slippery surfaces of rocks in fast-flowing and turbulent alpine streams, waterfalls, and rivers. This remarkable performance can be attributed to the larvae's powerful ventral suckers. In this article, we first develop a theoretical model of the piston-driven sucker that considers the lubricated state of the contact area. We then implement a piston-driven robotic sucker featuring a V-shaped notch to explore the adhesion-sliding mechanism. Each biomimetic larval sucker has the unique feature of an anterior-facing V-shaped notch on its soft disc rim; it slides along the shear direction while the entire disc surface maintains powerful adhesion on the benthic substrate, just like the biological counterpart. We found that this biomimetic sucker can reversibly transit between "high friction" (4.26 ± 0.34 kPa) and "low friction" (0.41 ± 0.02 kPa) states due to the piston movement, resulting in a frictional enhancement of up to 93.9%. We also elucidate the frictional anisotropy (forward/backward force ratio: 0.81) caused by the V-shaped notch. To demonstrate the robotic application of this adhesion-sliding mechanism, we designed an underwater crawling robot Adhesion Sliding Robot-1 (ASR-1) equipped with two biomimetic ventral suckers. This robot can successfully crawl on a variety of substrates such as curved surfaces, sidewalls, and overhangs and against turbulent water currents with a flow speed of 2.4 m/s. In addition, we implemented a fixed-wing aircraft Adhesion Sliding Robot-2 (ASR-2) featuring midge larva-inspired suckers, enabling transit from rapid water surface gliding to adhesion sliding in an aquatic environment. This adhesion-sliding mechanism inspired by net-winged midge larvae may pave the way for future robots with long-term observation, monitoring, and tracking capabilities in a wide variety of aerial and aquatic environments.

Making Sticky-Slippery Switchable Fluorogels Through Self-Adaptive Bicontinuous Phase Separation.

Developing gel materials with tunable frictional properties is crucial for applications in soft robotics, anti-fouling, and joint protection. However, achieving reversible switching between extreme sticky and slippery states remains a formidable challenge due to the opposing requirements for energy dissipation on gel surfaces. Herein, a self-adaptive bicontinuous fluorogel is introduced that decouples lubrication and adhesion at varying temperatures. The phase-separated fluorogel comprises a soft fluorinated lubricating phase and a stiff yet thermal-responsive load-bearing phase. At ambient temperature, the fluorogel exhibits a highly slippery surface owing to a low-energy-dissipating lubricating layer, demonstrating an ultralow friction coefficient of 0.004. Upon heating, the fluorogel transitions into a highly dissipating state via hydrogen bond dissociation, concurrently releasing adhesive dangling chains to make the surface highly sticky with an adhesion strength of ≈362kPa. This approach provides a promising foundation for creating advanced adaptive materials with on-demand self-adhesive and self-lubricating capabilities.

Trajectory tracking multi-constraint model predictive control of unmanned vehicles based on sideslip stiffness estimation with XGBoost algorithm

When the vehicle is driving at high speed on a slippery road, the sideslip stiffness of the tire which is closely related to the lateral force of the tire, will vary with the change of road conditions, tire inflation pressure, vertical load, and other factors. If the tire sideslip stiffness is set to a fixed value in the control system based on the model design, the uncertainty of the sideslip stiffness will cause a large error with the actual application. Therefore, in order to improve the trajectory tracking accuracy of the vehicle on the slippery road surface under the premise of ensuring the stability of the vehicle, an intelligent vehicle trajectory tracking control strategy considering the influence of sideslip stiffness is designed in this paper. In order to solve the multiple constraints of the vehicle driving on the low-adhesion road surface, a trajectory tracking controller based on the multi-constraint model predictive control algorithm is designed, and then the tire sideslip stiffness estimation strategy is designed based on the XGBoost algorithm, and the estimated sideslip deviation stiffness is added to the trajectory tracking control model. Carsim and MATLAB/Simulink are used to perform co-simulation to verify the accuracy of the proposed tire sideslip stiffness estimation and the tracking performance of the trajectory tracking controller. In order to further verify the reliability of the research content, the relevant working condition tests are carried out on the hardware-in-the-loop platform based on Carsim and LabVIEW, and the effectiveness of the trajectory tracking controller considering the influence of sideslip stiffness is verified.

Preparation of Super Slippery Surface of Polyimide Composite Microspheres

Preparation of Super Slippery Surface of Polyimide Composite Microspheres

Can Microcavitated Slippery Surfaces Outperform Micropillared and Untextured?

Surface features' morphology is crucial in designing lubricant-infused slippery surfaces (LIS). Microcavities were hypothesized to provide lower physical pinning, reduced droplet normal adhesion, and superior lubricant retention as compared to micropillars and untextured surfaces. Micropillars and microcavities (h = 10 ± 3 μm, d = 8 ± 1 μm, p = 17 ± 3 μm, rw = 1.4 ± 0.2) were replicated on polydimethylsiloxane from Lotus leaf and were coated with 1000 cSt silicone oil films (530 nm-27 μm thick). Water wetting, water-oil thermodynamic stability, droplet's normal adhesion and oil shear drainage properties were investigated to evaluate the relative performance of microcavitated, micropillared and untextured LIS. For ≤7 μm thick oil films, cavitated and untextured LIS displayed superior slippery properties than micropillared LIS (16 ± 1°, 7 ± 1°, 30 ± 4° slide-off angles respectively). Also, normal adhesion is of the order: cavities < untextured < pillars, and smaller than their dry counterparts. Furthermore, the oil retention efficiency under the action of centrifugal forces and continuous shear flow of water is of the order: pillars > cavities > untextured. Thus, it can be concluded that microcavitated LIS can outperform micropillared and untextured LIS.

Multi-Bioinspired Fog Harvesting Structure with Asymmetric Surface for Hydrogen Revolution.

The urgent need for sustainable energy storage drives the fast development of diverse hydrogen production based on clean water resources. Herein, a unique type of multi-bioinspired functional device (MFD) is reported with asymmetric wettability that combines the curvature gradient of cactus spines, the wetting gradient of lotus, and the slippery surface of Nepenthes alata for efficient fog harvesting. The precisely printed MFDs with microscale features, spanning dimensions, and a thin wall are endowed with asymmetric wettability to enable the Janus effects on their surfaces. Fog condenses on the superhydrophobic surface of the MFDs in the form of microdroplets and unidirectionally penetrates its interior due to the Janus effects, and drops onto the designated area with a better fog harvesting rate of 10.64gcm-2 h-1. Most significantly, the collected clean water can be used for hydrogen production with excellent stability and durability. The findings demonstrate that safe, large-scale, high-performance water splitting and gas separation and collection with fog collection based on MFDs are possible.

Multi-hierarchical structured PTFE membrane for liquid desiccant dewatering via membrane distillation

Poly (tetrafluoroethylene) (PTFE) can be used for robust separation membranes owing to its exceptional chemical and thermal stabilities. Simultaneously achieving construction of hierarchical pore structures and re-entrant surface microstructures during the fabrication of PTFE membrane holds significant importance in addressing the issues of low flux and membrane wetting in membrane distillation (MD). Herein, we proposed a flexible method for manufacturing hierarchically structured PTFE membrane by combining electrospinning/spraying with sintering/welding. The present approach facilitated the controlled fabrication of a superhydrophobic PTFE membrane with slippery surface (exhibiting a water contact angle of 153.5°, and an ultralow sliding angle of 7.5°) without using fluoride-based solvents or external nanoparticles. Moreover, the anti-wetting mechanism and performance stability of the PTFE membranes in MD were thoroughly investigated. In liquid desiccant regeneration experiments, the 20 wt% LiCl solution was successfully concentrated to 28.64 wt%. Furthermore, the PTFE membrane demonstrated a stable flux (>30 kg m−2 h−1) and relatively low permeate conductivity (<15 μs cm−1) during treating simulated seawater for 30 h. The present work offers a new approach to fabricate multi-hierarchical structured superhydrophobic membranes for desalination and regeneration of liquid desiccants.

Surface morphology-controlled poly(ε-caprolactone) nanofiber anti-fouling coating: A promising approach for marine applications

Abstract To effectively combat marine biofouling, biomimetic anti-fouling coatings have garnered widespread attention as a novel anti-fouling method. Based on this biomimetic concept, this study adjusted the electrospinning process parameters and selected different solvent systems to effectively modify the surface morphology of poly (ॉ-caprolactone) (PCL) nanofiber coatings, developing a non-toxic anti-fouling smooth surface. These biodegradable slippery liquid-infused porous surfaces (SLIPS) coatings offer a simple way to prepare maritime anti-fouling coatings in an eco-friendly manner. They can withstand a variety of liquid, material, and microbiological contaminations.

Failure mechanism of loess landslide induced by water stagnation on the combined surface

In order to reveal the destructive mechanism of loess landslide induced by stagnant water on the combined surface, and to clarify the influence of the main control factors, this paper takes a typical loess landslide in northern Shaanxi as the research object, analyzes the structure of the rock and soil body, and the excavation and filling construction through the geohazard survey, and analyzes the process of traction sliding caused by the stagnant water on the combined surface at the different stages of the project by combining with the calculation of the stability of the slope body. Further the article analyses the process of traction sliding caused by water on the combined area due to construction by means of a discrete element model, and delves into the mechanism of strength reduction of saturated loess. The results show that: 1) the combined surface stagnant water type loess landslide has the characteristics of sudden sliding and rapid evolution, which is highly hazardous and difficult to prevent and control; 2) the slope destabilization is controlled by the engineering geological conditions, and the slope excavation changes the original mechanical equilibrium conditions of the slope, which provides the dynamic conditions for the traction sliding of the slope; 3) the change of the hydrogeological environment results in the obstruction of the natural drainage channel, which leads to the formation of continuous sliding surface due to stagnant water on the combined surface, and the formation of a continuous sliding surface due to stagnant water on the combined surface. Surface stagnant water to form a continuous slippery surface, inducing the overall destabilization of the slope damage; 4) loess strength index with the increase of saturation and the exponential function form of reduction, and when the saturation degree reaches more than 80%, the strength index of the soil body to reach the basic stability. The article expanding the ideas of landslide control and analysis, and the research results will provide a theoretical basis for the design of junction landslide management in the loess areas of northern Shaanxi.

Amyloid Proteins Adhesive for Slippery Liquid-Infused Porous Surfaces.

Biomimetic slippery liquid-infused porous surfaces (SLIPS) have emerged as a promising solution to solve the limitations of superhydrophobic surfaces, such as inadequate durability in corrosion protection and a propensity for frosting. However, the challenge of ensuring strong, lasting adhesion on diverse materials to enhance the durability of the lubricant layer remains. The research addresses this by leveraging amyloid phase-transitioned lysozyme (PTL) as an adhesive interlayer, conferring stable attachment of SLIPS across a variety of substrates, including metals, inorganics, and polymers. The silica-textured interface robustly secures the lubricant with a notably low sliding angle of 1.15°. PTL-mediated adhesion fortifies the silicone oil attachment to the substrate, ensuring the retention of its repellent efficacy amidst mechanical stressors like ultrasonication, water scrubbing, and centrifugation. The integration of robust adhesion, cross-substrate compatibility, and durability under stress affords the PTL-modified SLIPS exceptional anti-fouling, anti-icing, and anti-corrosion properties, marking it as a leading solution for advanced protective applications.

Ultrahigh Subcooling Dropwise Condensation Heat Transfer on Slippery Liquid-like Monolayer Grafted Surfaces.

Rapid and continuous droplet shedding is crucial for many applications, including thermal management, water harvesting, and microfluidics, among others. Superhydrophobic surfaces, though effective, suffer from droplet pinning at high subcooling temperature (Tsub). Conversely, slippery liquid-like surfaces covalently bonded with flexible hydrophobic molecules show high stability and low droplet adhesion attributed to their dense and ultrasmooth water repellent polymer chains, enhancing dropwise condensation and rapid shedding. In this work, linear poly(dimethylsiloxane) chains of various viscosities are covalently bonded onto silicon substrates to form thin and smooth monolayer coated surfaces. The formation of the monolayer is characterized by cryogenic transmission electron microscopy. On these surfaces a very low contact angle hysteresis is reported within wide surface temperature ranges as well as continuous dropwise condensation at ultrahigh Tsub of 60 K. In particular, one of the highest condensation heat fluxes of 1392.60 kW·m-2 and a heat transfer coefficient of 23.21 kW·m-2·K-1 at ultrahigh Tsub of 60 K is reported. The experimental heat transfer performance is further compared to the theoretical heat transfer via the individual droplets with the droplet distribution elucidated via both macroscopic observations as well as environmental scanning electron microscopy. Finally, only a mild decrease in the heat transfer coefficient of 20.3% after 100 h of condensation test at Tsub of 60 K is reported. Slippery liquid-like surfaces promote droplet shedding and sustain dropwise condensation at high Tsub without flooding empowered by the lower frictional forces, addressing challenges in heat transfer performance and durability.

Preparation of slippery liquid-infused porous surface with high stability by SiO2-assisted polyimide porous membrane

Preparation of slippery liquid-infused porous surface with high stability by SiO2-assisted polyimide porous membrane

Patterned Ultraslippery Surfaces of Stainless Steel Prepared by Femtosecond Laser Ablation for Directional Manipulation of Liquid Droplets.

Slippery liquid-infused porous surfaces (SLIPS) have promising applications in chip laboratories, nanofriction power generation, and microfluidics due to their excellent properties such as good hydrophobicity and low adhesion. However, the self-driven stability of conventionally lubricated surfaces is not high, and the velocity of liquid droplets is difficult to regulate. This greatly limits the potential applications of SLIPS. A strategy is offered to prepare microporous structures of SLIPS directly on a stainless-steel substrate using femtosecond laser processing technology as the main means to realize exhibiting smoothness to liquids. At the same time, the principle of bionics is utilized, the porous structure of SLIPS is combined with the groove structure of rice leaves, or porous structures are combined with the wedge structure of shorebird beak to prepare the three-dimensional structure of SLIPS. Droplets exhibit significant individual anisotropy on three-dimensional (3D) SLIPS of leaf-like groove stripe structure in rice, enabling the precise control of droplet motion direction. When droplets are transported in wedge-shaped SLIPS with an asymmetric structure, the wedge edge can limit the direction of droplet motion while squeezing the droplet to generate Laplace pressure gradient, which achieves continuous self-driven transport of droplets. In addition, based on the above two processing strategies, an information transfer device is designed: the splicing of the self-driven transport surface with anisotropic topological channels enables the differential drive for liquid transport, which provides the conditions for the information transfer of the droplets. This strategy not only is simple and efficient but also provides new ideas for the effective development of multifunctional SLIPS as well as lab-on-a-chip and microfluidic domains.

Effect of lubricant loading in slippery liquid-infused surface for persistent anti-icing performance

Due to the vast applications in biomedical materials and aerospace industry, smart slippery liquid-infused porous surfaces (SLIPSs) have attracted remarkable attention. However, there are still challenges in the fabrication of durable SLIPS. In this work, based on linear polyurea and silicone oil, a series of durable anti-icing surface were fabricated. Based on the long-lasting secretion of lubricant, the ice adhesion strength of 60-PUa was 2.7 ± 0.5 kPa and could remain below 10 kPa even after 30 icing-deicing cycles. And the icing delay time of 60-PUa could be extended up to 870 s at a temperature of −15 °C. The introduction of large numbers of reversible hydrogen bonds in the system and silicone oil made it possible to achieve high self-healing efficiency under natural conditions. The coating system not only improved the ice removal ability, but also had excellent water-sliding properties, the droplet could slide under its own weight on 60-PUa at a tilt angle of 4.7°. This work provides an easy way to fabricate multi-functional SLIPS with durability.

UV-driven self-replenishing liquid-infused surface with promising anti-algal adhesion performance.

Slippery liquid-infused porous surfaces (SLIPSs) inspired by Nepenthes have attracted much attention owing to their potential application in various cutting-edge fields. However, the performance of SLIPSs is impeded by surface damage and lubricant depletion, thereby limiting their further application. Herein, a UV-responsive slippery surface (SMEMG) was fabricated by introducing the UV-responsive functional group coumarin into the polymer side chain through random copolymerization, followed by crosslinking, curing and impregnation with vegetable oil. The self-healing ability and lubricant self-replenishing performance of the SMEMG were investigated. The results show that upon exposure to UV light, the damaged surface substrate can be repaired through a reversible photodimerization reaction between coumarin groups. Meanwhile, the lubricant oil within the bulk of the SMEMG substrate can be extruded to the surface during the photodimerization reaction, facilitating the recovery of surface wettability. The SMEMG exhibited excellent self-cleaning and anti-algal properties as well as durability in a harsh environment, demonstrating its promising application in marine anti-fouling.