Sliding Clamp Protein Research Articles

Structural Basis for the Interaction Between Yeast Chromatin Assembly Factor 1 and Proliferating Cell Nuclear Antigen

Proliferating cell nuclear antigen (PCNA), the homotrimeric eukaryotic sliding clamp protein, recruits and coordinates the activities of a multitude of proteins that function on DNA at the replication fork. Chromatin assembly factor 1 (CAF-1), one such protein, is a histone chaperone that deposits histone proteins onto DNA immediately following replication. The interaction between CAF-1 and PCNA is essential for proper nucleosome assembly at silenced genomic regions. Most proteins that bind PCNA contain a PCNA-interacting peptide (PIP) motif, a conserved motif containing only eight amino acids. Precisely how PCNA is able to discriminate between binding partners at the replication fork using only these small motifs remains unclear. Yeast CAF-1 contains a PIP motif on its largest subunit, Cac1. We solved the crystal structure of the PIP motif of CAF-1 bound to PCNA using a new strategy to produce stoichiometric quantities of one PIP motif bound to each monomer of PCNA. The PIP motif of CAF-1 binds to the hydrophobic pocket on the front face of PCNA in a similar manner to most known PIP-PCNA interactions. However, several amino acids immediately flanking either side of the PIP motif bind the IDCL or C-terminus of PCNA, as observed for only a couple other known PIP-PCNA interactions. Furthermore, mutational analysis suggests positively charged amino acids in these flanking regions are responsible for the low micromolar affinity of CAF-1 for PCNA, whereas the presence of a negative charge upstream of the PIP prevents a more robust interaction with PCNA. These results provide additional evidence that positive charges within PIP-flanking regions of PCNA-interacting proteins are crucial for specificity and affinity of their recruitment to PCNA at the replication fork.

Subtractive genomics study of Xanthomonas oryzae pv. Oryzae reveals repurposable drug candidate for the treatment of bacterial leaf blight in rice

BackgroundXanthomonas oryzae pv. oryzae is a plant pathogen responsible for causing one of the most severe bacterial diseases in rice, known as bacterial leaf blight that poses a major threat to global rice production. Even though several experimental compounds and chemical agents have been tested against X. oryzae pv. oryzae, still no approved drug is available. In this study, a subtractive genomic approach was used to identify potential therapeutic targets and repurposible drug candidates that could control of bacterial leaf blight in rice plants. ResultsThe entire proteome of the pathogen underwent an extensive filtering process which involved removal of the paralogous proteins, rice homologs, non-essential proteins. Out of the 4382 proteins present in Xoo proteome, five hub proteins such as dnaA, dnaN, recJ, ruvA, and recR were identified for the druggability analysis. This analysis led to the identification of dnaN-encoded Beta sliding clamp protein as a potential therapeutic target and one experimental drug named [(5R)-5-(2,3-dibromo-5-ethoxy-4hydroxybenzyl)-4-oxo-2-thioxo-1,3-thiazolidin-3-yl]acetic acid that can be repurposed against it. Molecular docking and 100 ns long molecular dynamics simulation suggested that the drug can form stable complexes with the target protein over time. ConclusionFindings from our study indicated that the proposed drug showed potential effectiveness against bacterial leaf blight in rice caused by X. oryzae pv. oryzae. It is essential to keep in consideration that the procedure for developing novel drugs can be challenging and complicated. Even the most promising results from in silico studies should be validated through further in vitro and in vivo investigation before approval.

Crystal structure of African swine fever virus pE301R reveals a ring-shaped trimeric DNA sliding clamp

African swine fever virus (ASFV) is an important animal pathogen that is causing a current African swine fever pandemic and affecting pork industry globally. ASFV encodes at least 150 proteins, and the functions of many of them remain to be clarified. The ASFV protein E301R (pE301R) was predicted to be a DNA sliding clamp protein homolog working as a DNA replication processivity factor. However, structural evidence was lacking to support the existence of a ring-shaped sliding clamp in large eukaryotic DNA viruses. Here, we have solved a high-resolution crystal structure of pE301R and identified a canonical ring-shaped clamp comprising a pE301R trimer. Interestingly, this complete-toroidal structure is different from those of the monomeric clamp protein homolog, herpes simplex virus UL42, and the C-shaped dimeric human cytomegalovirus UL44, but highly homologous to that of the eukaryotic clamp homolog proliferating cell nuclear antigen. Moreover, pE301R has a unique N-terminal extension that is important in maintaining the trimeric form of the protein in solution, while specific features in length and surface electrostatic potential of its interdomain connector implies specificity in interactions with binding partners such as the viral DNA polymerase. Thus, our data pave the way for further dissection of the processivity clamp protein structural and functional diversity and ASFV DNA replication mechanisms.

A thermosensitive PCNA allele underlies an ataxia-telangiectasia-like disorder

Proliferating cell nuclear antigen (PCNA) is a sliding clamp protein that coordinates DNA replication with various DNA maintenance events that are critical for human health. Recently, a hypomorphic homozygous serine to isoleucine (S228I) substitution in PCNA was described to underlie a rare DNA repair disorder known as PCNA-associated DNA repair disorder (PARD). PARD symptoms range from UV sensitivity, neurodegeneration, telangiectasia, and premature aging. We, and others, previously showed that the S228I variant changes the protein-binding pocket of PCNA to a conformation that impairs interactions with specific partners. Here, we report a second PCNA substitution (C148S) that also causes PARD. Unlike PCNA-S228I, PCNA-C148S has WT-like structure and affinity toward partners. In contrast, both disease-associated variants possess a thermostability defect. Furthermore, patient-derived cells homozygous for the C148S allele exhibit low levels of chromatin-bound PCNA and display temperature-dependent phenotypes. The stability defect of both PARD variants indicates that PCNA levels are likely an important driver of PARD disease. These results significantly advance our understanding of PARD and will likely stimulate additional work focused on clinical, diagnostic, and therapeutic aspects of this severe disease.

SUMOylation regulates low-temperature survival and oxidative DNA damage tolerance in Botrytis cinerea.

SUMOylation as one of the protein post-translational modifications plays crucial roles in multiple biological processes of eukaryotic organisms. Botrytis cinerea is a devastating fungal pathogen and capable of infecting plant hosts at low temperature. However, the molecular mechanisms of low-temperature adaptation are largely unknown in fungi. Combining with biochemical methods and biological analyses, we report that SUMOylation regulates pathogen survival at low temperature and oxidative DNA damage response during infection in B. cinerea. The heat shock protein (Hsp70) BcSsb and E3 ubiquitin ligase BcRad18 were identified as substrates of SUMOylation; moreover, their SUMOylation both requires a single unique SUMO-interacting motif (SIM). SUMOylated BcSsb regulates β-tubulin accumulation, thereby affecting the stability of microtubules and consequently mycelial growth at low temperature. On the contrary, SUMOylated BcRad18 modulates mono-ubiquitination of the sliding clamp protein proliferating cell nuclear antigen (PCNA), which is involved in response to oxidative DNA damage during infection. Our study uncovers the molecular mechanisms of SUMOylation-mediated low-temperature survival and oxidative DNA damage tolerance during infection in a devastating fungal pathogen, which provides novel insights into low-temperature adaptation and pathogenesis for postharvest pathogens as well as new targets for inhibitor invention in disease control.

Mechanism of sliding clamp loading during DNA replication and repair in atomic detail.

DNA replication is essential for all life. Efficient and fast replication is promoted by ring-shaped sliding clamp proteins. Moreover, the eukaryotic clamp, Proliferating Cellular Nuclear Antigen (PCNA) coordinates several other cellular pathways, including DNA repair. PCNA's role as the central hub for pathways that maintain genome stability makes its proper function important to human health. The main regulator of sliding clamp is the clamp loader AAA+ ATPase. The eukaryotic loader, Replication Factor C (RFC), opens the closed PCNA and loads it onto DNA. Despite years of study, it was unclear how RFC opens PCNA and subsequently binds DNA. To address this, we used single particle cryoEM to reconstruct multiple structures of the RFC:PCNA complex that delineate the steps in the clamp loading reaction, ranging from the first encounter complex to intermediates with PCNA loaded onto primer-template DNA without ATP hydrolysis. We observe that RFC opens PCNA with a ‘crab-claw-like’ motion that enables RFC to prefer PCNA binding before DNA. Furthermore, primer-template DNA, RFC's primary DNA substrate during replication, binds directly to the central chamber of the complex. However, this structure did not tell us how the complex binds to other DNA substrates, such as nicked or gapped DNA for DNA repair. Thus, we also determined structures of RFC:PCNA bound to those DNA and discovered a second DNA binding site. Both DNA binding sites contain ‘separation pins’ that melt DNA without ATP hydrolysis to provide the flexibility required for DNA binding. This is the first structural insight into how PCNA can accomplish its dual roles in DNA repair and replication, and is supported by our biochemical and cellular studies. In all, our study shows how a AAA+ ATPase can load sliding clamps at a variety of DNA architectures.

A second DNA binding site on RFC facilitates clamp loading at gapped or nicked DNA.

Clamp loaders place circular sliding clamp proteins onto DNA so that clamp-binding partner proteins can synthesize, scan, and repair the genome. DNA with nicks or small single-stranded gaps are common clamp-loading targets in DNA repair, yet these substrates would be sterically blocked given the known mechanism for binding of primer-template DNA. Here, we report the discovery of a second DNA binding site in the yeast clamp loader replication factor C (RFC) that aids in binding to nicked or gapped DNA. This DNA binding site is on the external surface and is only accessible in the open conformation of RFC. Initial DNA binding at this site thus provides access to the primary DNA binding site in the central chamber. Furthermore, we identify that this site can partially unwind DNA to create an extended single-stranded gap for DNA binding in RFC's central chamber and subsequent ATPase activation. Finally, we show that deletion of the BRCT domain, a major component of the external DNA binding site, results in defective yeast growth in the presence of DNA damage where nicked or gapped DNA intermediates occur. We propose that RFC's external DNA binding site acts to enhance DNA binding and clamp loading, particularly at DNA architectures typically found in DNA repair.

A turn-on fluorescent PCNA sensor

The solvatochromic amino-acids 4-DMNA or 4-DAPA, were separately introduced at position 147, 150 or 151 of a short p21 peptide (141–155) known to bind sliding clamp protein PCNA. The ability of these peptides, 1a-3a and 1b-3b, to act as a turn-on fluorescent sensor for PCNA was then investigated. The 4-DMNA-containing peptides (1a-3a) displayed up to a 40-fold difference in fluorescence between a polar (Tris buffer) and a hydrophobic solvent (dioxane with 5 mM 18-crown-6), while the 4-DAPA-containing peptides (1b-3b) displayed a significantly enhanced (300-fold) increase in fluorescence from Tris buffer to dioxane with 18-crown-6. SPR analysis of the peptides against PCNA revealed that the 151-substituted peptides 3a and 3b interacted specifically with PCNA, with KD values of 921 nM and 1.28 μM, respectively. Analysis of the fluorescence of these peptides in the presence of increasing concentrations of PCNA revealed a 10-fold change in fluorescence for 3a at 2.5 equivalents of PCNA, compared to only a 3.5-fold change in fluorescence for 3b. Peptide 3a is an important lead for development of a PCNA-selective turn-on fluorescent sensor for application as a cell proliferation sensor to investigate diseases such as cancer.

A cell permeable bimane-constrained PCNA-interacting peptide.

The human sliding clamp protein known as proliferating cell nuclear antigen (PCNA) orchestrates DNA-replication and -repair and as such is an ideal therapeutic target for proliferative diseases, including cancer. Peptides derived from the human p21 protein bind PCNA with high affinity via a 310-helical binding conformation and are known to shut down DNA-replication. Here, we present studies on short analogues of p21 peptides (143–151) conformationally constrained with a covalent linker between i, i + 4 separated cysteine residues at positions 145 and 149 to access peptidomimetics that target PCNA. The resulting macrocycles bind PCNA with KD values ranging from 570 nM to 3.86 μM, with the bimane-constrained peptide 7 proving the most potent. Subsequent X-ray crystallography and computational modelling studies of the macrocyclic peptides bound to PCNA indicated only the high-affinity peptide 7 adopted the classical 310-helical binding conformation. This suggests the 310-helical conformation is critical to high affinity PCNA binding, however NMR secondary shift analysis of peptide 7 revealed this secondary structure was not well-defined in solution. Peptide 7 is cell permeable and localised to the cell cytosol of breast cancer cells (MDA-MB-468), revealed by confocal microscopy showing blue fluorescence of the bimane linker. The inherent fluorescence of the bimane moiety present in peptide 7 allowed it to be directly imaged in the cell uptake assay, without attachment of an auxiliary fluorescent tag. This highlights a significant benefit of using a bimane constraint to access conformationally constrained macrocyclic peptides. This study identifies a small peptidomimetic that binds PCNA with higher affinity than previous reported p21 macrocycles, and is cell permeable, providing a significant advance toward development of a PCNA inhibitor for therapeutic applications.

Binding-Induced Conformational Changes Involved in Sliding Clamp PCNA and DNA Polymerase DPO4.

SummaryCooperation between DNA polymerases and DNA sliding clamp proteins is essential for DNA replication and repair. However, it is still challenging to clarify the binding mechanism and the movements of Y-family DNA polymerase IV (DPO4) on the proliferating cell nuclear antigen (PCNA) ring. Here we develop the simulation models of DPO4–PCNA123 and DPO4–PCNA12 complexes and uncover the underlying dynamics of DPO4 during binding and the binding order of the DPO4 domains. Two important intermediate states are found on the free energy surface before reaching the final bound state. Our results suggest that both PCNA3 and DPO4 can influence the PCNA12 planar conformation, whereas the impact of PCNA3 on PCNA12 is more significant than DPO4. These findings provide the crucial information of the conformational dynamics of DPO4 and PCNA, as well as the clue of the underlying mechanism of the cooperation between DPO4 and PCNA during DNA replication.

A new insight into protein-protein interactions and the effect of conformational alterations in PCNA

The sliding clamp proteins are present in almost all forms of life and participate in various fundamental processes. Many of these proteins accommodate a conserved sequence that interacts with the hydrophobic groove on sliding clamps. The conserved sequence on proteins is known as the PCNA-interacting protein box, and the hydrophobic groove of PCNA contains regions of the inter-domain connecting loop, the central loop, and amino acids from the C-terminal tail of PCNA. We performed molecular dynamics simulation studies (1.0 μs) to analyze the structural changes at the atomic level in native, C22Y, and C81R mutant PCNA. Our study revealed significant changes at sites responsible for a functional trimeric form of PCNA. This study also unveils the dynamic behavior of IDCL, central loop, and the C-terminal tail, which are essential regions for protein binding with PCNA and also sheds light on the effect of mutations on binding with the Cdc9 peptide. The observation of Cdc9 peptide complexed with native and mutants (C22Y and C81R) structures possibly reveals the mechanism by which PCNA recruits different proteins required for various biological processes and also highlights the importance of dynamic behavior of key regions involved in PCNA protein-protein interactions.

Dynamics of the E. coli β-Clamp Dimer Interface and Its Influence on DNA Loading

The ring-shaped sliding clamp proteins have crucial roles in the regulation of DNA replication, recombination, and repair in all organisms. We previously showed that the Escherichia coli β-clamp is dynamic in solution, transiently visiting conformational states in which Domain 1 at the dimer interface is more flexible and prone to unfolding. This work aims to understand how the stability of the dimer interface influences clamp-opening dynamics and clamp loading by designing and characterizing stabilizing and destabilizing mutations in the clamp. The variants with stabilizing mutations conferred similar or increased thermostability and had similar quaternary structure as compared to the wild type. These variants stimulated the ATPase function of the clamp loader, complemented cell growth of a temperature-sensitive strain, and were successfully loaded onto a DNA substrate. The L82D and L82E I272A variants with purported destabilizing mutations had decreased thermostability, did not complement the growth of a temperature-sensitive strain, and had weakened dimerization as determined by native trapped ion mobility spectrometry-mass spectrometry. The β L82E variant had a reduced melting temperature but dimerized and complemented growth of a temperature-sensitive strain. All three clamps with destabilizing mutations had perturbed loading on DNA. Molecular dynamics simulations indicate altered hydrogen-bonding patterns at the dimer interface, and cross-correlation analysis showed the largest perturbations in the destabilized variants, consistent with the observed change in the conformations and functions of these clamps.

Recognition of a Key Anchor Residue by a Conserved Hydrophobic Pocket Ensures Subunit Interface Integrity in DNA Clamps

Sliding clamp proteins encircle duplex DNA and are involved in processive DNA replication and the DNA damage response. Clamp proteins are ring-shaped oligomers (dimers or trimers) and are loaded onto DNA by an ATP-dependent clamp loader complex that ruptures the interface between two adjacent subunits. Here we measured the solution dynamics of the human clamp protein, proliferating cell nuclear antigen, by monitoring the change in the fluorescence of a site-specifically labeled. To unravel the origins of clamp subunit interface stability, we carried out comprehensive comparative analysis of the interfaces of seven sliding clamps. We used computational modeling (molecular dynamic simulations and MM/GBSA binding energy decomposition analyses) to identify conserved networks of hydrophobic residues critical for clamp stability and ring-opening dynamics. The hydrophobic network is shared among clamp proteins and exhibits a “key in a keyhole” pattern where a bulky aromatic residue from one clamp subunit is anchored into a hydrophobic pocket of the opposing subunit. Bioinformatics and dynamic network analyses showed that this oligomeric latch is conserved across DNA sliding clamps from all domains of life and dictates the dynamics of clamp opening and closing.

How Does the Proliferating Cell Nuclear Antigen Modulate Binding Specificity to Multiple Partner Proteins?

Proliferating cell nuclear antigen (PCNA) is a member of the family of sliding clamp proteins that serves as a clamp during DNA repair, DNA replication, cell cycle control, and multiple forms of chromatin modification. PCNA functions as a homotrimer and complexes with multiple proteins in order to carry out each of these varied functions. PCNA binds to different partner proteins in the same region of its structure, called the " interdomain connecting loop", but with different affinities. This interdomain connecting loop is an intrinsically disordered region that takes different conformations when binding to different partner proteins. In this work, we performed all-atom molecular dynamics simulations on PCNA trimer unbound to any partner protein, PCNA bound to peptides from different partner proteins, and PCNA bound to the full Fen 1 protein in two different conformations. Using this massive amount of simulation results, we analyzed whether PCNA in its free trimeric form samples conformations that are similar to those when it is bound to different partner proteins. We observed that PCNA samples many of these peptide-bound conformations even when not bound to the peptides and selects specific conformations when binding to partner proteins. We also identified PCNA-peptide interactions formed in the peptide bound simulation that play a crucial role in complex formation. The calculated binding energies correlate well with the measured binding affinities of various peptides to PCNA. Lastly, we studied the internal dynamics of PCNA and propose a mechanism through which PCNA recruits binding partners. This work highlights the functional role of intrinsically disordered regions in multifunctional proteins such as PCNA.

Dynamics of the E. coli beta clamp and its influence on DNA loading

Sliding clamps are found in all domains of life and are essential for efficient DNA replication, which is required every time a cell divides, as well as for coordinating traffic on DNA. The Escherichia coli (E. coli) beta‐clamp is a ring‐shaped protein consisting of two identical monomers encoded by the dnaN gene that associates with DNA polymerase III and facilitates the high degree of processivity required for DNA replication. Sliding clamp proteins open and are loaded onto specific DNA structures by clamp loaders in the presence of ATP. We aim to gain insights into the contributions of different domains to the function of beta using a linked‐beta‐clamp that constrains the homodimer at one of two interfaces. Usually the homo‐dimeric structure of the beta‐clamp allows it to act as a molecular tool belt, binding more than one protein simultaneously at specific protein interaction sites on the clamp. Thus, a better understanding of the sliding clamps' role in the process of DNA damage tolerance will be gathered by investigating whether one interface or binding site is adequate for DNA loading or for other protein interactions. To create this construct, the linker length and sequence, as well as expression conditions, were optimized. The linked‐beta proteins were characterized through a thermal denaturation assay, and showed comparable thermal stability to wild‐type beta. In an ATPase assay, similar amounts of inorganic phosphate were detected in reactions containing either linked‐beta or wild‐type beta, indicating that the clamp loader can interact with both versions of the beta clamp. Currently, we are investigating whether linked and wild‐type beta improve the processivity of a polymerase in a primer extension assay. We are now constructing and characterizing variants of wild‐type beta and linked‐beta to test the importance of residues at only one of the interfaces or partner protein binding sites.

Identification of β Clamp-DNA Interaction Regions That Impair the Ability of E. coli to Tolerate Specific Classes of DNA Damage.

The E. coli dnaN-encoded β sliding clamp protein plays a pivotal role in managing the actions on DNA of the 5 bacterial DNA polymerases, proteins involved in mismatch repair, as well as several additional proteins involved in DNA replication. Results of in vitro experiments indicate that the loading of β clamp onto DNA relies on both the DnaX clamp loader complex as well as several discrete sliding clamp-DNA interactions. However, the importance of these DNA interactions to E. coli viability, as well as the ability of the β clamp to support the actions of its numerous partner proteins, have not yet been examined. To determine the contribution of β clamp-DNA interactions to the ability of E. coli to cope with different classes of DNA damage, we used alanine scanning to mutate 22 separate residues mapping to 3 distinct β clamp surfaces known or nearby those known to contact the DNA template, including residues P20-L27 (referred to here as loop I), H148-Y154 (loop II) and 7 different residues lining the central pore of the β clamp through which the DNA template threads. Twenty of these 22 dnaN mutants supported bacterial growth. While none of these 20 conferred sensitivity to hydrogen peroxide or ultra violet light, 12 were sensitized to NFZ, 5 were sensitized to MMS, 8 displayed modestly altered frequencies of DNA damage-induced mutagenesis, and 2 may be impaired for supporting hda function. Taken together, these results demonstrate that discrete β clamp-DNA interaction regions contribute to the ability of E. coli to tolerate specific classes of DNA damage.

Reproduction of the FC/DFC units in nucleoli

ABSTRACTThe essential structural components of the nucleoli, Fibrillar Centers (FC) and Dense Fibrillar Components (DFC), together compose FC/DFC units, loci of rDNA transcription and early RNA processing. In the present study we followed cell cycle related changes of these units in 2 human sarcoma derived cell lines with stable expression of RFP-PCNA (the sliding clamp protein) and GFP-RPA43 (a subunit of RNA polymerase I, pol I) or GFP-fibrillarin. Correlative light and electron microscopy analysis showed that the pol I and fibrillarin positive nucleolar beads correspond to individual FC/DFC units. In vivo observations showed that at early S phase, when transcriptionally active ribosomal genes were replicated, the number of the units in each cell increased by 60–80%. During that period the units transiently lost pol I, but not fibrillarin. Then, until the end of interphase, number of the units did not change, and their duplication was completed only after the cell division, by mid G1 phase. This peculiar mode of reproduction suggests that a considerable subset of ribosomal genes remain transcriptionally silent from mid S phase to mitosis, but become again active in the postmitotic daughter cells.

Molecular Dissection of the Homotrimeric Sliding Clamp of T4 Phage: Two Domains of a Subunit Display Asymmetric Characteristics.

Sliding clamp proteins are circular dimers or trimers that encircle DNA and serve as processivity factors during DNA replication. Their presence in all the three domains of life and in bacteriophages clearly indicates their high level of significance. T4 gp45, besides functioning as the DNA polymerase processivity factor, also moonlights as the late promoter transcription determinant. Here we report a detailed biophysical analysis of gp45. The chemical denaturation of gp45 probed by circular dichroism spectroscopy, tryptophan fluorescence anisotropy, and blue-native polyacrylamide gel electrophoresis suggests that the protein follows a three-state denaturation profile and displays an intermediate molten globule-like state. The three-state transition was found to be the result of the sequential unfolding of the two domains, the N-terminal domain (NTD) and the C-terminal domain (CTD), of gp45. The experiments involving Trp fluorescence quenching by acrylamide demonstrate that the CTD undergoes substantial changes in conformation during formation of the intermediate state. Further biophysical dissection of the individual domain reveals contrasting properties of the two domains. The NTD unfolds at low urea concentrations and is also susceptible to protease cleavage, whereas the CTD resists urea-mediated denaturation and is not amenable to protease digestion even at higher urea concentrations. These experiments allow us to conclude that the two domains of gp45 differ in their dynamics. While the CTD shows stability and rigidity, we find that the NTD is unstable and flexible. We believe that the asymmetric characteristics of the two domains and the interface they form hold significance in gp45 structure and function.

A Genetic Selection for dinB Mutants Reveals an Interaction between DNA Polymerase IV and the Replicative Polymerase That Is Required for Translesion Synthesis.

Translesion DNA synthesis (TLS) by specialized DNA polymerases (Pols) is a conserved mechanism for tolerating replication blocking DNA lesions. The actions of TLS Pols are managed in part by ring-shaped sliding clamp proteins. In addition to catalyzing TLS, altered expression of TLS Pols impedes cellular growth. The goal of this study was to define the relationship between the physiological function of Escherichia coli Pol IV in TLS and its ability to impede growth when overproduced. To this end, 13 novel Pol IV mutants were identified that failed to impede growth. Subsequent analysis of these mutants suggest that overproduced levels of Pol IV inhibit E. coli growth by gaining inappropriate access to the replication fork via a Pol III-Pol IV switch that is mechanistically similar to that used under physiological conditions to coordinate Pol IV-catalyzed TLS with Pol III-catalyzed replication. Detailed analysis of one mutant, Pol IV-T120P, and two previously described Pol IV mutants impaired for interaction with either the rim (Pol IVR) or the cleft (Pol IVC) of the β sliding clamp revealed novel insights into the mechanism of the Pol III-Pol IV switch. Specifically, Pol IV-T120P retained complete catalytic activity in vitro but, like Pol IVR and Pol IVC, failed to support Pol IV TLS function in vivo. Notably, the T120P mutation abrogated a biochemical interaction of Pol IV with Pol III that was required for Pol III-Pol IV switching. Taken together, these results support a model in which Pol III-Pol IV switching involves interaction of Pol IV with Pol III, as well as the β clamp rim and cleft. Moreover, they provide strong support for the view that Pol III-Pol IV switching represents a vitally important mechanism for regulating TLS in vivo by managing access of Pol IV to the DNA.

Separation of replication and transcription domains in nucleoli.

In mammalian cells, active ribosomal genes produce the 18S, 5.8S and 28S RNAs of ribosomal particles. Transcription levels of these genes are very high throughout interphase, and the cell needs a special strategy to avoid collision of the DNA polymerase and RNA polymerase machineries. To investigate this problem, we measured the correlation of various replication and transcription signals in the nucleoli of HeLa, HT-1080 and NIH 3T3 cells using a specially devised software for analysis of confocal images. Additionally, to follow the relationship between nucleolar replication and transcription in living cells, we produced a stable cell line expressing GFP-RPA43 (subunit of RNA polymerase I, pol I) and RFP-PCNA (the sliding clamp protein) based on human fibrosarcoma HT-1080 cells. We found that replication and transcription signals are more efficiently separated in nucleoli than in the nucleoplasm. In the course of S phase, separation of PCNA and pol I signals gradually increased. During the same period, separation of pol I and incorporated Cy5-dUTP signals decreased. Analysis of single molecule localization microscopy (SMLM) images indicated that transcriptionally active FC/DFC units (i.e. fibrillar centers with adjacent dense fibrillar components) did not incorporate DNA nucleotides. Taken together, our data show that replication of the ribosomal genes is spatially separated from their transcription, and FC/DFC units may provide a structural basis for that separation.