Skeletal Muscle Tissue Engineering Research Articles

Thickening tissue by thinning electrospun scaffolds for skeletal muscle tissue engineering

AbstractElectrospun scaffolds with aligned fiber orientation are widely used in tissue engineering, such as muscle, heart, nerve, tendon, and cartilage, due to their ability to guide cell morphology and induce cellular functions. However, the dense fibrous structure of the scaffolds poses a critical obstacle to engineering highly cellular and thick 3D tissues, as it prevents cell infiltration. While many techniques have been developed to increase the pore size of electrospun scaffolds and improve cell infiltration/migration, it often leads to a decrease in direct cell‐cell contact, compromising cell differentiation and tissue maturation. This study presents an alternative approach by reducing the thickness of scaffolds to the cellular scale and stacking or rolling the cell‐scaffold complex into 3D constructs. We devise a series of novel tools to fabricate, characterize, and manipulate ultra‐thin electrospun scaffolds, which demonstrate high reproducibility, resolution, and cellularity. Our study provides a solution to the cell infiltration issue in muscle tissue engineering and is highly versatile, and can be applied to various fields that require structures with high‐resolution gradients in a layered pattern or complex spatial distribution in a rolled pattern.

Biomaterials-Based Technologies in Skeletal Muscle Tissue Engineering.

For many clinically prevalent severe injuries, the inherent regenerative capacity of skeletal muscle remains inadequate. Skeletal muscle tissue engineering (SMTE) seeks to meet this clinical demand. With continuous progress in biomedicine and related technologies including micro/nanotechnology and 3D printing, numerous studies have uncovered various intrinsic mechanisms regulating skeletal muscle regeneration and developed tailored biomaterial systems based on these understandings. Here, the skeletal muscle structure and regeneration process are discussed and the diverse biomaterial systems derived from various technologies are explored in detail. Biomaterials serve not merely as local niches for cell growth, but also as scaffolds endowed with structural or physicochemical properties that provide tissue regenerative cues such as topographical, electrical, and mechanical signals. They can also act as delivery systems for stem cells and bioactive molecules that have been shown as key participants in endogenous repair cascades. To achieve bench-to-bedside translation, the typical effect enabled by biomaterial systems and the potential underlying molecular mechanisms are also summarized. Insights into the roles of biomaterials in SMTE from cellular and molecular perspectives are provided. Finally, perspectives on the advancement of SMTE are provided, for which gene therapy, exosomes, and hybrid biomaterials may hold promise to make important contributions.

Decellularised plant scaffolds facilitate porcine skeletal muscle tissue engineering for cultivated meat biomanufacturing

Cultivated meat (CM) offers a sustainable and ethical alternative to conventional animal agriculture, involving cell maturation in a controlled environment. To emulate the structural complexity of traditional meat, the development of animal-free and edible scaffolds is crucial, providing vital physical and biological support during tissue development. The aligned vascular bundles of the decellularised asparagus scaffold were selected to facilitate the attachment and alignment of murine myoblasts (C2C12) and porcine adipose-derived mesenchymal stem cells (pADMSCs). Muscle differentiation was assessed through immunofluorescence staining with muscle markers, including Myosin heavy chain (MHC), Myogenin (MYOG), and Desmin. The metabolic activity of Creatine Kinase in C2C12 differentiated cells significantly increased compared to proliferated cells. Quantitative PCR analysis revealed a significant increase in Myosin Heavy Polypeptide 1 (MYH1) and MYOG expression compared to Day 0. These results highlight the application of decellularised plant scaffold (DPS) as a promising, edible material conducive to cell attachment, proliferation, and differentiation into muscle tissue. To create a CM prototype with biological mimicry, pADMSC-derived muscle and fat cells were also co-cultured on the same scaffold. The co-culture was confirmed through immunofluorescence staining of muscle markers and LipidTOX staining, revealing distinct muscle fibres and adipocytes containing lipid droplets respectively. Texture profile analysis conducted on uncooked CM prototypes and pork loin showed no significant differences in textural values. However, the pan-fried CM prototype differed significantly in hardness and chewiness compared to pork loin. Understanding the scaffolds’ textural profile enhances our insight into the potential sensory attributes of CM products. DPS shows potential for advancing CM biomanufacturing.

Comparison of skeletal muscle decellularization protocols and recellularization with adipose-derived stem cells for tissue engineering

Decellularization is a novel technique employed for scaffold manufacturing, as a strategy for skeletal muscle (SM) tissue engineering applications. However, poor decellularization efficacy is still a problem for the use of decellularized scaffolds as truly biocompatible biomaterials. For recellularization, adipose-derived stem cells (ASCs) are a good option, due to their immunomodulatory and pro-regenerative capacity, but few studies have described their combination with muscle-decellularized matrices (mDMs). This work aimed to evaluate the efficiency of four multi-step decellularization protocols to produce mDMs and to investigate in vitro biocompatibility with ASCs. Here, we described the different efficacies of muscle decellularization methods, suggesting the need for stricter standardization of the method, considering the large range of applications in SM tissue engineering, which is also a promising platform for preclinical studies with rat disease models using autologous cells.

Generating human skeletal myoblast spheroids for vascular myogenic tissue engineering

Engineered myogenic microtissues derived from human skeletal myoblasts offer unique opportunities for varying skeletal muscle tissue engineering applications, such as in vitro drug-testing and disease modelling. However, more complex models require the incorporation of vascular structures, which remains to be challenging. In this study, myogenic spheroids were generated using a high-throughput, non-adhesive micropatterned surface. Since monoculture spheroids containing human skeletal myoblasts were unable to remain their integrity, co-culture spheroids combining human skeletal myoblasts and human adipose-derived stem cells were created. When using the optimal ratio, uniform and viable spheroids with enhanced myogenic properties were achieved. Applying a pre-vascularization strategy, through addition of endothelial cells, resulted in the formation of spheroids containing capillary-like networks, lumina and collagen in the extracellular matrix, whilst retaining myogenicity. Moreover, sprouting of endothelial cells from the spheroids when encapsulated in fibrin was allowed. The possibility of spheroids, from different maturation stages, to assemble into a more large construct was proven by doublet fusion experiments. The relevance of using three-dimensional microtissues with tissue-specific microarchitecture and increased complexity, together with the high-throughput generation approach, makes the generated spheroids a suitable tool for in vitro drug-testing and human disease modeling.

Stretchable Alginate/GelMA Interpenetrating Network (IPN) hydrogel microsprings based on coaxial microfluidic technique for skeletal muscle tissue engineering

The emulation of the natural organization and contractile properties of native stretchable tissues have crucial implications for skeletal muscle tissue engineering (SMTE). Helical structures, ubiquitous in nature and endowed with unique mechanical characteristics, have recently gained significant traction in SMTE applications. However, developing hierarchical hydrogel-based scaffolds that both replicate exceptional mechanical properties and control cellular organization remains challenging. Herein, we present an interpenetrating network (IPN) hydrogel synthesized from alginate and GelMA materials, to fabricate stretchable helical hydrogel microsprings via a coaxial microfluidic chip, showcasing superior elasticity attributed to helical structures. These hydrogel microsprings showed the micro- and nanoscale patterned groove/ridge helical structures, which microsprings demonstrated the ability to guide myoblast alignment and elongation along the longitudinal axis of the helical structures in vitro. Moreover, when the hydrogel microsprings were tailored into suitable sizes and utilized as injectable micro-scaffolds, they provided a conducive mechanical microenvironment for enhancing cell infiltration and facilitating muscle tissue regeneration in situ in rat models. This study offers a promising strategy for creating stretchable helical hydrogel microsprings that integrate distinctive micro- and nanoscale features, which not only showed the potential as biomimetic elastic scaffolds for guiding 3D cellular orientation in vitro but also as injectable carriers for enhancing skeletal muscle tissue regeneration in vivo.

Repairing Volumetric Muscle Loss with Commercially Available Hydrogels in an Ovine Model.

Volumetric muscle loss (VML) is the loss of skeletal muscle that exceeds the muscle's self-repair mechanism and leads to permanent functional deficits. In a previous study, we demonstrated the ability of our scaffold-free, multiphasic, tissue-engineered skeletal muscle units (SMUs) to restore muscle mass and force production. However, it was observed that the full recovery of muscle structure was inhibited due to increased fibrosis in the repair site. As such, novel biomaterials such as hydrogels (HGs) may have significant potential for decreasing the acute inflammation and subsequent fibrosis, as well as enhancing skeletal muscle regeneration following VML injury and repair. The goal of the current study was to assess the biocompatibility of commercially available poly(ethylene glycol), methacrylated gelatin, and hyaluronic acid (HA) HGs in combination with our SMUs to treat VML in a clinically relevant large animal model. An acute 30% VML injury created in the sheep peroneus tertius (PT) muscle was repaired with or without HGs and assessed for acute inflammation (incision swelling) and white blood cell counts in blood for 7 days. At the 7-day time point, HA was selected as the HG to use for the combined HG/SMU repair, as it exhibited a reduced inflammation response compared to the other HGs. Six weeks after implantation, all groups were assessed for gross and histological structural recovery. The results showed that the groups repaired with an SMU (SMU-Only and SMU+HA) restored muscle mass to greater degree than the groups with only HG and that the SMU groups had PT muscle masses that were statistically indistinguishable from its uninjured contralateral PT muscle. Furthermore, the HA HG, SMU-Only, and SMU+HA groups displayed notable efficacy in diminishing pro-inflammatory markers and showed an increased number of regenerating muscle fibers in the repair site. Taken together, the data demonstrates the efficacy of HA HG in decreasing acute inflammation and fibrotic response. The combination of HA and our SMUs also holds promise to decrease acute inflammation and fibrosis and increase muscle regeneration, advancing this combination therapy toward clinically relevant interventions for VML injuries in humans.

Trends and Future Research in Skeletal Muscle Tissue Engineering in the Past Decade (2012-2022).

To learn about advances in skeletal muscle tissue engineering (SMTE) in recent years, we used VOSviewer and Citespace software to quantitatively analyze and visualize relevant literature in the Web of Science database during the period 2012-2022. By mapping high-frequency keyword relationship networks, keyword time zones, and journal article cocitations, we clarified the areas of great interest, evolutionary paths, and developmental trends in research on SMTE. We conducted an in-depth analysis of highly cited and representative articles at various stages to summarize the mainstream research areas of great interest in SMTE and discussed the future development and challenges in this field, intending to provide a reference for the clinical treatment of skeletal muscle injury repair. We found that a collaborative network of authors has formed in this field; the journals publishing SMTE articles belong to the fields of biomaterials and tissue engineering, and open-access journals have played a key role in the promotion of the development of SMTE; and in the past decade, there has been rapid progress in SMTE research in terms of both depth and breadth. Impact statement Compared with the literature review method, bibliometrics can provide a comprehensive knowledge of a knowledge area based on a huge amount of literature. In this article, based on the Web of Science database, CiteSpace, and Vosviewer visualization tools were used to measure and analyze the literature reports in the field of skeletal muscle tissue engineering (SMTE). The research hotspots and cutting-edge information on SMTE were mined in terms of the number of publications, the number of citations, the keywords, the authors, and the publishing institutions to understand the current status of the research on SMTE in the world, to provide a reference for related researchers, engineering research in the field of SMTE, to comprehensively understand the current status of global research in the field of SMTE, and to provide a reference for related researchers.

Schwann Cells Do Not Promote Myogenic Differentiation in the EPI Loop Model.

In skeletal muscle tissue engineering, innervation and vascularization play an essential role in the establishment of functional skeletal muscle. For adequate three-dimensional assembly, biocompatible aligned nanofibers are beneficial as matrices for cell seeding. The aim of this study was to analyze the impact of Schwann cells (SC) on myoblast (Mb) and adipogenic mesenchymal stromal cell (ADSC) cocultures on poly-ɛ-caprolactone (PCL)-collagen I-nanofibers in vivo. Human Mb/ADSC cocultures, as well as Mb/ADSC/SC cocultures, were seeded onto PCL-collagen I-nanofiber scaffolds and implanted into the innervated arteriovenous loop model (EPI loop model) of immunodeficient rats for 4 weeks. Histological staining and gene expression were used to compare their capacity for vascularization, immunological response, myogenic differentiation, and innervation. After 4 weeks, both Mb/ADSC and Mb/ADSC/SC coculture systems showed similar amounts and distribution of vascularization, as well as immunological activity. Myogenic differentiation could be observed in both groups through histological staining (desmin, myosin heavy chain) and gene expression (MYOD, MYH3, ACTA1) without significant difference between groups. Expression of CHRNB and LAMB2 also implied neuromuscular junction formation. Our study suggests that the addition of SC did not significantly impact myogenesis and innervation in this model. The implanted motor nerve branch may have played a more significant role than the presence of SC.

DEVELOPMENT OF 4D PRINTING STRATEGY FOR SKELETAL MUSCLE TISSUE ENGINEERING

Skeletal muscle tissue engineering has made progress towards production of functional tissues in line with the development in materials science and fabrication techniques. In particular, combining the specificity of 3D printing with smart materials has introduced a new concept called the 4D printing. Inspired by the unique properties of smart/responsive materials, we designed a bioink made of gelatin, a polymer with well-known cell compatibility, to be 3D printed on a magnetically responsive substrate. Gelatin was made photocrosslinkable by the methacrylate reaction (GELMA), and its viscosity was finetuned by blending with alginate which was later removed by alginate lyase treatment, so that the printability of the bioink as well as the cell viability can be finetuned. C2C12 mouse myoblasts-laden bioink was then 3D printed on a magnetic substrate for 4D shape-shifting. The magnetic substrate was produced using silicon rubber (EcoFlex) and carbonyl iron powders. After 3D printing, the bioink was crosslinked on the substrate, and the substrate was rolled with the help of a permanent magnet. Unrolled (Open) samples were used as the control group. The stiffness of the bioink matrix was found to be in the range of 13–45 kPa, which is the appropriate value for the adhesion of C2C12 cells. In the cell viability analysis, it was observed that the cells survived and could proliferate within the 7-day duration of the experiment. As a result of the immunofluorescence test, compared to the Open Group, more cell nuclei were observed overlapping MyoD1 expression in the Rolled Group; this indicated that the cells in these samples had more cell-cell interactions and therefore tended to form more myotubes.Acknowledgements: This research was supported by the TÜBİTAK 2211-A and YÖK 100/2000 scholarship programs.

Assessment of laser-synthesized Si nanoparticle effects on myoblast motility, proliferation and differentiation: towards potential tissue engineering applications.

Due to their biocompatibility and biodegradability and their unique structural and physicochemical properties, laser-synthesized silicon nanoparticles (Si-NPs) are one of the nanomaterials which have been most studied as potential theragnostic tools for non-invasive therapeutic modalities. However, their ability to modulate cell behavior and to promote proliferation and differentiation is still very little investigated or unknown. In this work, ultrapure ligand free Si-NPs of 50 ± 11.5 nm were prepared by femtosecond (fs) laser ablation in liquid. After showing the ability of Si-NPs to be internalized by murine C2C12 myoblasts, the cytotoxicity of the Si-NPs on these cells was evaluated at concentrations ranging from 14 to 224 μg mL-1. Based on these findings, three concentrations of 14, 28 and 56 μg mL-1 were thus considered to study the effect on myoblast differentiation, proliferation and motility at the molecular and phenotypical levels. It was demonstrated that up to 28 μg mL-1, the Si-NPs are able to promote the proliferation of myoblasts and their subsequent differentiation. Scratch tests were also performed revealing the positive Si-NP effect on cellular motility at 14 and 28 μg mL-1. Finally, gene expression analysis confirmed the ability of Si-NPs to promote proliferation, differentiation and motility of myoblasts even at very low concentration. This work opens up novel exciting prospects for Si-NPs made by the laser process as innovative tools for skeletal muscle tissue engineering in view of developing novel therapeutic protocols for regenerative medicine.

Enhancement of mitochondrial energy metabolism by melatonin promotes vascularized skeletal muscle regeneration in a volumetric muscle loss model

Volumetric muscle loss (VML) is a condition that results in the extensive loss of 20 % or more of skeletal muscle due to trauma or tumor ablation, leading to severe functional impairment and permanent disability. The current surgical interventions have limited functional regeneration of skeletal muscle due to the compromised self-repair mechanism. Melatonin has been reported to protect skeletal muscle from exercise-induced oxidative damage and holds great potential to treat muscle diseases. In this study, we hypothesize that melatonin can enhance myoblast differentiation and promote effective recovery of skeletal muscle following VML. In vitro administration of melatonin resulted in a significant enhancement of myogenesis in C2C12 myoblast cells, as evidenced by the up-regulation of myogenic marker genes in a dose-dependent manner. Further experiments revealed that silent information of regulator type 3 (SIRT3) played a critical role in the melatonin-enhanced myoblast differentiation through enhancement of mitochondrial energy metabolism and activation of mitochondrial antioxidant enzymes such as superoxide dismutase 2 (SOD2). Silencing of Sirt3 completely abrogated the protective effect of melatonin on the mitochondrial function of myoblasts, evidenced by the increased reactive oxygen species, decreased adenosine triphosphate production, and down-regulated myoblast-specific marker gene expression. In order to attain a protracted and consistent release, liposome-encapsuled melatonin was integrated into gelatin methacryloyl hydrogel (GelMA-Lipo@MT). The implantation of GelMA-Lipo@MT into a tibialis anterior muscle defect in a VML model effectively stimulated the formation of myofibers and new blood vessels in situ, while concurrently inhibiting fibrotic collagen deposition. The findings of this study indicate that the incorporation of melatonin with GelMA hydrogel has facilitated the de novo vascularized skeletal muscle regeneration by augmenting mitochondrial energy metabolism. This represents a promising approach for the development of skeletal muscle tissue engineering, which could be utilized for the treatment of VML and other severe muscle injuries.

Impact of Human Recombinant Irisin on Tissue-Engineered Skeletal Muscle Structure and Function.

Tissue engineering of exogenous skeletal muscle units (SMUs) through isolation of muscle satellite cells from muscle biopsies is a potential treatment method for acute volumetric muscle loss (VML). A current issue with this treatment process is the limited capacity for muscle stem cell (satellite cell) expansion in cell culture, resulting in a decreased ability to obtain enough cells to fabricate SMUs of appropriate size and structural quality and that produce native levels of contractile force. This study determined the impact of human recombinant irisin on the growth and development of three-dimensional (3D) engineered skeletal muscle. Muscle satellite cells were cultured without irisin (control) or with 50, 100, or 250 ng/mL of irisin supplementation. Light microscopy was used to analyze myotube formation with particular focus placed on the diameter and density of the monotubes during growth of the 3D SMU. Following the formation of 3D constructs, SMUs underwent measurement of maximum tetanic force to analyze contractile function, as well as immunohistochemical staining, to characterize muscle structure. The results indicate that irisin supplementation with 250 ng/mL significantly increased the average diameter of myotubes and increased the proliferation and differentiation of myoblasts in culture but did not have a consistent significant impact on force production. In conclusion, supplementation with 250 ng/mL of human recombinant irisin promotes the proliferation and differentiation of myotubes and has the potential for impacting contractile force production in scaffold-free tissue-engineered skeletal muscle.

Three-Dimensional Bioprinting in Soft Tissue Engineering for Plastic and Reconstructive Surgery.

Skeletal muscle tissue engineering (TE) and adipose tissue engineering have undergone significant progress in recent years. This review focuses on the key findings in these areas, particularly highlighting the integration of 3D bioprinting techniques to overcome challenges and enhance tissue regeneration. In skeletal muscle TE, 3D bioprinting enables the precise replication of muscle architecture. This addresses the need for the parallel alignment of cells and proper innervation. Satellite cells (SCs) and mesenchymal stem cells (MSCs) have been utilized, along with co-cultivation strategies for vascularization and innervation. Therefore, various printing methods and materials, including decellularized extracellular matrix (dECM), have been explored. Similarly, in adipose tissue engineering, 3D bioprinting has been employed to overcome the challenge of vascularization; addressing this challenge is vital for graft survival. Decellularized adipose tissue and biomimetic scaffolds have been used as biological inks, along with adipose-derived stem cells (ADSCs), to enhance graft survival. The integration of dECM and alginate bioinks has demonstrated improved adipocyte maturation and differentiation. These findings highlight the potential of 3D bioprinting techniques in skeletal muscle and adipose tissue engineering. By integrating specific cell types, biomaterials, and printing methods, significant progress has been made in tissue regeneration. However, challenges such as fabricating larger constructs, translating findings to human models, and obtaining regulatory approvals for cellular therapies remain to be addressed. Nonetheless, these advancements underscore the transformative impact of 3D bioprinting in tissue engineering research and its potential for future clinical applications.

Porous biomaterial scaffolds for skeletal muscle tissue engineering.

Volumetric muscle loss is a traumatic injury which overwhelms the innate repair mechanisms of skeletal muscle and results in significant loss of muscle functionality. Tissue engineering seeks to regenerate these injuries through implantation of biomaterial scaffolds to encourage endogenous tissue formation and to restore mechanical function. Many types of scaffolds are currently being researched for this purpose. Scaffolds are typically made from either natural, synthetic, or conductive polymers, or any combination therein. A major criterion for the use of scaffolds for skeletal muscle is their porosity, which is essential for myoblast infiltration and myofiber ingrowth. In this review, we summarize the various methods of fabricating porous biomaterial scaffolds for skeletal muscle regeneration, as well as the various types of materials used to make these scaffolds. We provide guidelines for the fabrication of scaffolds based on functional requirements of skeletal muscle tissue, and discuss the general state of the field for skeletal muscle tissue engineering.

Real‐time and Multichannel Measurement of Contractility of hiPSC‐Derived 3D Skeletal Muscle using Fiber Optics‐Based Sensing

AbstractAs the field of cardiac and skeletal muscle tissue engineering expands, so does the need for accurate and reliable systems to generate in vitro 3D tissues and analyze their functional properties. In this study, the Cuore is introduced, a system that integrates sensors based on optical fibers and uses the principle of light interferometry to detect the contraction of 3D Tissue Engineered Skeletal Muscles (3D‐TESMs). The technology employed in the Cuore allows for reproducible and multichannel force measurements down to a nano‐Newtons resolution while maintaining sterility and permitting continuous non‐invasive recording within and outside standard tissue culture incubators. Thanks to the integrated electrodes for electrical pulse stimulation (EPS), 3D‐TESMs generated from three independent hiPSC‐derived myogenic progenitors (MPs) lines are stimulated and the contractility is recorded over the course of a week. Through the modulation of different EPS parameters, the optimal combination to induce the 3D‐TESMs in producing fully fused tetani without causing damage is determined. Furthermore, 3D‐TESMs from different lines exhibit characteristic signatures of spontaneous contractility and response to caffeine, verapamil, and the β‐agonist clenbuterol. The ease of use, high sensitivity, and the integrated electrodes and sensors make the Cuore an ideal technology to investigate the biology of contractile tissues and their response to drugs.

Tunable Light-Actuated Interpenetrating Networks of Silk Fibroin and Gelatin for Tissue Engineering and Flexible Biodevices.

Soft materials with tunable properties are valuable for applications such as tissue engineering, electronic skins, and human-machine interfaces. Materials that are nature-derived offer additional advantages such as biocompatibility, biodegradability, low-cost sourcing, and sustainability. However, these materials often have contrasting properties that limit their use. For example, silk fibroin (SF) has high mechanical strength but lacks processability and cell-adhesive domains. Gelatin, derived from collagen, has excellent biological properties, but is fragile and lacks stability. To overcome these limitations, composites of gelatin and SF have been explored. However, mechanically robust self-supported matrices and electrochemically active or micropatterned substrates were not demonstrated. In this study, we present a composite of photopolymerizable SF and photogelatin, termed photofibrogel (PFG). By incorporating photoreactive properties in both SF and gelatin, control over material properties can be achieved. The PFG composite can be easily and rapidly formed into free-standing, high-resolution architectures with tunable properties. By optimizing the ratio of SF to gelatin, properties such as swelling, mechanical behavior, enzymatic degradation, and patternability are tailored. The PFG composite allows for macroscale and microscale patterning without significant swelling, enabling the fabrication of structures using photolithography and laser cutting techniques. PFG can be patterned with electrically conductive materials, making it suitable for cell guidance and stimulation. The versatility, mechanical robustness, bioactivity, and electrochemical properties of PFG are shown for skeletal muscle tissue engineering using C2C12 cells as a model. Overall, such composite biomaterials with tunable properties have broad potential in flexible bioelectronics, wound healing, regenerative medicine, and food systems.

Cryopreservation Alters Tissue Structure and Improves Differentiation of Engineered Skeletal Muscle.

Tissue-engineered skeletal muscle can play an important role in regenerative medicine, disease modeling, drug testing, as well as the actuation of biohybrid machines. As the applications of engineered muscle tissues expand, there exists a growing need to cryopreserve and store these tissues without impairing function. In a previous study, we developed a cryopreservation protocol in which engineered skeletal muscle tissues are frozen before myogenic differentiation. In that study, we found that this cryopreservation process led to a three-fold increase in the force generation of the differentiated muscle. Here, we perform further testing to determine the mechanisms by which cryopreservation enhances engineered skeletal muscle function. We found that cryopreservation alters the microstructure of the tissue by increasing pore size and decreasing elastic modulus of the extracellular matrix (ECM), which leads to increased expression of genes related to cell migration, cell-matrix adhesion, ECM secretion, and protease activity. Specifically, cryopreservation leads to the upregulation of many ECM proteins, including laminin, fibronectin, and several types of collagens, as well as integrins and matrix metalloproteinases. These changes to ECM structure and composition were associated with enhanced myogenic differentiation, as evidenced by the upregulation of late-stage myogenic markers and increased force generation. These results highlight the need to understand the effects of cryopreservation on the ECM of other tissues as we strive to advance tissue and organ cryopreservation protocols for regenerative medicine.

Diabetes diminishes muscle precursor cell-mediated microvascular angiogenesis.

The skeletal muscles of Type II diabetic (T2D) patients can be characterized by a reduced vessel density, corresponding to deficiencies in microvascular angiogenesis. Interestingly, T2D also inhibits the function of many myogenic cells resident within skeletal muscle, including satellite cells, which are well-known for the role they play in maintaining homeostasis. The current study was undertaken to gain a better understanding of the mechanisms whereby satellite cell progeny, muscle precursor cells (MPCs), influence microvascular angiogenesis. Network growth and the expression of genes associated with angiogenesis were reduced when microvessels were treated with conditioned media generated by proliferating MPCs isolated from diabetic, as compared to control rat skeletal muscle, a phenomenon that was also observed when myoblasts from control or diabetic human skeletal muscle were used. When only exosomes derived from diabetic or control MPCs were used to treat microvessels, no differences in microvascular growth were observed. An evaluation of the angiogenesis factors in control and diabetic MPCs revealed differences in Leptin, vascular endothelial growth factor (VEGF), IL1-β, interleukin 10, and IP-10, and an evaluation of the MPC secretome revealed differences in interleukin 6, MCP-1, VEGF, and interleukin 4 exist. Angiogenesis was also reduced in tissue-engineered skeletal muscles (TE-SkM) containing microvessels when they were generated from MPCs isolated from diabetic as compared to control skeletal muscle. Lastly, the secretome of injured control, but not diabetic, TE-SkM was able to increase VEGF and increase microvascular angiogenesis. This comprehensive analysis of the interaction between MPCs and microvessels in the context of diabetes points to an area for alleviating the deleterious effects of diabetes on skeletal muscle.

Long-term longitudinal study on swine VML model

BackgroundVolumetric Muscle Loss (VML), resulting from severe trauma or surgical ablation, is a pathological condition preventing myofibers regeneration, since skeletal muscle owns the remarkable ability to restore tissue damage, but only when limited in size. The current surgical therapies employed in the treatment of this pathology, which particularly affects military personnel, do not yet provide satisfactory results. For this reason, more innovative approaches must be sought, specifically skeletal muscle tissue engineering seems to highlight promising results obtained from preclinical studies in VML mouse model. Despite the great results obtained in rodents, translation into human needs a comparable animal model in terms of size, in order to validate the efficacy of the tissue engineering approach reconstructing larger muscle mass (human-like). In this work we aim to demonstrate the validity of a porcine model, that has underwent a surgical ablation of a large muscle area, as a VML damage model.ResultsFor this purpose, morphological, ultrasound, histological and fluorescence analyses were carried out on the scar tissue formed following the surgical ablation of the peroneus tertius muscle of Sus scrofa domesticus commonly called mini-pig. In particular, the replenishment of the damaged area, the macrophage infiltration and the vascularization at different time-points were evaluated up to the harvesting of the scar upon six months.ConclusionHere we demonstrated that following VML damage, there is an extremely poor regenerative process in the swine muscle tissue, while the formation of fibrotic, scar tissue occurs. The analyses performed up to 180 days after the injury revealed the development of a stable, structured and cellularized tissue, provided with vessels and extracellular matrix acquiring the status of granulation tissue like in human.