Sizing Of Distributed Generation Research Articles

A Multi-Objective Approach for Optimal Sizing and Placement of Distributed Generators and Distribution Static Compensators in a Distribution Network Using the Black Widow Optimization Algorithm

This paper presents a new optimization technique for the locations and sizes of Distributed Generators (DGs) and distribution static compensators (DSTATCOMs) in a radial system of a distribution network based on a multi-objective approach. It uses black widow optimization to improve voltage profile and power loss reduction. The black widow optimization simulates the mating behaviour of black widow spiders. The optimum size and placement of DGs and DSTATCOMs are deemed to be decision variables that are defined by using black widow optimization. The proposed technique is implemented in selected IEEE bus systems to evaluate its performance. The simulation results indicate reduced power losses and voltage profile enhancement as sizes and locations of integrated DGs and DSTATCOMs are adjusted based on optimization. The number of DGs and DSTATCOMs required to achieve the objectives is reduced. Furthermore, the results of the black widow algorithm are compared to existing techniques in the literature.

A REVIEW ON OPTIMAL PLACEMENT AND SIZING METHODS OF DISTRIBUTION GENERATION SOURCES

This manuscript outlines various work carried out in the field of Distributed Generation (DG). Increase in power consumption and shortage in transmission capabilities are addressed by DGs. In order to maximize the potential benefits, it is imperative to place the DGs at optimal locations and the DGs should have optimal size pertaining to that location. There are several research works that are carried out on the placement and sizing of DGs. Nonetheless, the methodical principle for this issue is still unsettled. Various optimization strategies can be used to obtain the appropriate placement and sizing of distributed generation (DG) in grids. This study provides a comprehensive overview of several DG placement approaches, including stochastic fractal search algorithms, particle swarm optimization, symbiotic search algorithms, opposition-based tuneable chaotic differential evaluation, and more. The benefits and potential uses of each method are briefly covered in this study. The study sheds light on the efforts made to determine the best location and size of DGs.

Particle Swarm Optimization (PSO) And Evolutionary Programming (EP) Technique for Optimal Placement and Sizing DG for Minimizing Loss in IEEE-30 Bus System

In recent years, most growing nations worldwide have experienced an unavoidably rising demand for electricity, which may result in a dropping of the voltage profile and a reduction in system stability, both of which have the potential to overload the power generation system significantly. One of the ways to reduce loss system network in this study is by distributed generation (DG) allocation, which the DG optimal location and sizing are the two most significant considerations for integration of DG. Improper placement and DG sizing in the power system not only result in increased total power losses but also affect the electrical system’s capability to be function properly. This paper provides a comparative analysis of two meta- heuristic optimization techniques, that is, Particle Swarm Optimization (PSO) and Evolutionary Programming (EP), to examine the optimal placement and sizing of distributed-generation (DG) for photovoltaic systems with the aim of minimizing the losses in interconnected distributed generation, IEEE-30 bus system. The objective function of this study is minimization the power loss with considered some constraints which are voltage limits and DG sizing limits are being covers in this study. The optimization issue has been solved by working with MATLAB/m-files software. The outcomes derived from the simulation results in this study demonstrated that PSO performance of two units of DG is better compared to EP algorithm. The voltage profile was improved drastically, and the power loss was reduced as lowest as 17.4486MW in the first case, 17.4368MW in the second case, and 17.4179MW in the third case.

OPTIMAL LOCATION AND SIZING OF DG IN DISTRIBUTION NETWORK: IMPACT ON OVERCURRENT DISTRIBUTION PROTECTION SCHEME

The integration of distributed generation (DG) into the existing distribution networks minimizes active power losses and improves the voltage profile. The recent improvement in the development of DG technology has caused increase in the penetration of DG from different sources. The optimal location and sizing of DG is very challenging and introduces different protection issues. This is caused by penetration of current flow from different source which is contrary to the principles of operation of the conventional overcurrent scheme. This paper presents optimal method of DG placement and sizing using firefly algorithm and its impact of DG penetration on overcurrent protection scheme. Low voltage distribution network is modelled and simulated in PSCAD/EMTDC and DigSilent power factory software using IEEE 33 and Ayepe 34 standard bus. False tripping of feeders, Nuisance tripping, blinding of the protection scheme and unintentional islanding caused as result of Photovoltaic penetration into the distribution network were simulated. Coordination of overcurrent relays with and without DG penetration were analyzed and possible mitigation algorithm were proposed. The simulation result obtained showed that the proposed methods significantly improve the protection scheme coordination..

Optimal sizing and siting of distributed generation systems incorporating reactive power tariffs via water flow optimization

Distributed generation (DG) systems are gaining popularity because they generate electricity closer to the point of consumption. This reduces transmission and distribution losses and enhances system reliability. For the efficient and cost-effective use of these systems, optimal sizing and siting of DGs is crucial. This paper introduces a Water Flow Optimization (WFO)-based method for the optimal placement and sizing of DG systems capable of injecting both active and reactive power simultaneously. This study assesses both the technical and economic facets of the system, taking into account power losses and the comprehensive annual economic costs, including capital investment, deployment, operation, and maintenance. A significant aspect of this research is the DG units' capability to enhance voltage and minimize losses, factoring in the reactive power tariff. The findings show that the WFO method surpasses other optimization techniques, such as particle swarm optimization, whale optimization algorithm, genetic algorithm and gray wolf optimization. Furthermore, the study emphasizes the cost advantages of injecting reactive power. The minimum annual economic losses (AEL) recorded in this study are $19,207 and $13,852 for IEEE-33 and IEEE-69 bus systems, respectively. In comparison, for DGs only injecting active power, the AEL increases to $24,749 and $41,381 for the corresponding systems.

Effects of integration of distributed generation on reliability in distribution system

The reliability of power supply to consumers is the main factor that is to be considered while designing, planning and operation of a distribution network. This problem can be solved by incorporating distributed generation (DG) at the consumer side itself. In order to enhance service availability, power quality, reliability, and loss reduction, DG is positioned optimally at the consumer end within the system. The optimal DG location and size is to be calculated in such a way that the total loss in the system should be minimal and cost savings should be maximal. In this study, for the investigation of effects of DG on reliability of distribution system, a practical 11 KV feeder with 41-bus, was employed. The selected practical feeder is modelled using the power world simulator (PWS) software and reliability of the system is verified by calculating various reliability indices such as system average interruption frequency index (SAIFI), system average interruption duration index (SAIDI), customer average interruption duration index (CAIDI), average system utility index (ASUI) and average service availability index (ASAI). After applying proposed loss sensitivity factor (LSF) method, the active and reactive power loss reduction are 41.30 % and 38.64 % respectively, least bus voltage is enhanced to 0.9405 pu from 0.8978 pu and the reliability indices are also improved.

Integrating Firefly and Crow Algorithms for the Resilient Sizing and Siting of Renewable Distributed Generation Systems under Faulty Scenarios

This study aimed to optimize the sizing and allocation of renewable distributed generation (RDG) systems, with a focus on renewable sources, under N-1 faulty line conditions. The IEEE 30-bus power system benchmark served as a case study for us to analyze and enhance the reliability and quality of the power system in the presence of faults. The firefly algorithm (FFA) combined with the crow search (CS) optimizer was used to achieve optimal RDG sizing and allocation through solving the optimal power flow (OPF) under the most severe N-1 faulty line. The reason for hybridization lies in leveraging the global search capabilities of the CS optimizer for the sizing and allocation of RDGs and the local search proficiency of the FFA for OPF. Two severe N-1 faulty conditions—F27-29 and F27-30—were separately applied to the IEEE 30-bus distribution system. The most severe N-1 faulty line of these two faulty lines was F27-30, based on a severity ranking index including both the voltage deviation index and the overloading index. Three candidate buses, namely 27, 29, and 30, were considered in the optimization process. Our methodology incorporated techno-economic multi-objectives, encompassing overall costs, power losses, and voltage deviation. The optimizer can eliminate the impractical buses/solutions automatically while remaining the practical one. The results revealed that optimal RDG allocation at bus 30 effectively alleviated line overloading, ensuring compliance with the line flow limit, reducing costs, and enhancing voltage profiles, thereby improving system performance under N-1 faulty conditions compared to the equivalent case without RDGs.

Hybrid Siting and Sizing of Distributed Generators and Shunt Capacitors with System Reconfiguration using Wild Horse Optimizer

Injection of Distributed generators (DGS) and Shunt capacitors (SCS) simultaneously with system reconfiguration significantly promotes smart grid performance. In addition, system reconfiguration increases the injected distributed generation capacity in the system. This work proposes a wild horse optimizer (WHO) for the optimal siting and sizing of DGS and SCS in parallel with network reconfiguration. The proposed method aims to attain single and multi-objectives: minimizing active power loss, maximizing voltage stability index (VSI), and minimizing voltage deviation index (VDI). Five operational cases are introduced to elucidate the superior performance of the proposed method. The five cases are executed on IEEE 33-bus standard radial distribution test system. The single-objective function results are compared with other optimization algorithms. The simulation results belay that the proposed WHO optimizer has the best results for unfixed DGS and SCS locations.

Optimal size and location of dispatchable distributed generators in an autonomous microgrid using Honey Badger algorithm

Optimal size and location of dispatchable distributed generators in an autonomous microgrid using Honey Badger algorithm

Cheetah optimization algorithm for simultaneous optimal network reconfiguration and allocation of DG and DSTATCOM with electric vehicle charging station

The potential of Electric Vehicles (EVs) to decarbonize the transportation industry has attracted a lot of attention in recent years in response to growing environmental concerns. Electric Vehicle Charging Stations (EVCSs) need to be properly located for widespread EV integration. The distribution system is facing additional challenges due to inclusion of EVCS. The adverse impacts of EVCS on the Radial Distribution Network (RDN) may be minimized using Distributed Generations (DGs) or Distribution Static Compensators (DSTATCOMs) or by reconfiguring the network. This paper uses a novel optimization technique to solve the problem of simultaneous optimal placement of EVCS with network reconfiguration and optimal planning (siting and sizing) of DGs and DSTATCOMs. The multiple objective functions are considered in order to minimize the active power losses, the voltage deviation, the investment costs for DGs and DSTATCOMs, and to increase the voltage stability of the system. A novel meta-heuristic Cheetah Optimization Algorithm (COA) is used to solve the optimization problem. To examine the effectiveness of the suggested strategy on 33-bus and 136-bus networks, several scenarios of simultaneous incorporation of EVCS, DG, and DSTATCOM installations with network reconfiguration are taken into consideration. The COA results are also compared to the results of grey wolf optimization and genetic algorithms.

Optimization of Distributed Generation in Radial Distribution Network for Active Power Loss Minimization using Jellyfish Search Optimizer Algorithm

The inclusion of distributed generation (DG) units in the distribution network (DN) effectively cuts down the power losses (PL) and strengthens the voltage profile (VP). This paper examines the effect of allocating different distributed generation (DG) in radial distribution networks (RDN) through an implementation of an optimization technique using a recently introduced bio- inspired algorithm known as a jellyfish search optimizer (JSO). Unlike the other optimization algorithms, the JSO algorithm evades the local optimal trap and reaches the optimal solution in less time. The DG position(s) and size(s) are optimized for active power loss (APL) minimization with respect to several constraints. The effectiveness and robustness of the proposed optimization technique using JSO algorithm is investigated on a balanced IEEE RDNs with 33, 69 and 118-buses. The simulation outcomes are obtained for different types (type I, II and III) of DG placement. Additionally, a comprehensive comparative study has been performed for the JSO and other algorithms. The comparison exemplifies that the proposed JSO optimization approach produces a better optimal solution with steady convergence than other techniques reported in the literature. Also, the simulation findings show the potentiality of JSO optimization method for solving complex optimization problems.

PSO‐based optimal placement of electric vehicle charging stations in a distribution network in smart grid environment incorporating backward forward sweep method

AbstractThe transition from conventional fossil‐fuel vehicles to electric vehicles (EVs) is critical for mitigating environmental pollution. The placement of electric vehicle charging stations (EVCS) significantly impacts the utility operator and electrical network. Inappropriately placed EVCS lead to challenges such as increased load, unbalanced generation, power losses, and reduced voltage stability. Incorporating distributed generation (DG) helps mitigate these issues by maximizing EV usage. This study focuses on optimizing EVCS and DG placement in radial distribution networks. The methodology employs a backward and forward sweep method for load flow analysis and utilizes the particle swarm optimization (PSO) algorithm to determine optimal EVCS and DG locations and sizes. This approach, validated on the IEEE‐33 bus system, outperforms existing methods. Results indicate a 2.5 times greater power loss reduction compared to simulated annealing (SA), 1.6 times better than artificial bee colony, and parity with genetic algorithm (GA). Overall, the PSO algorithm demonstrates superior optimization effectiveness and computational efficiency, showcasing 1–2.5 times better performance than other methodologies. Employing this approach yields significantly improved results, making it a promising technique for optimizing EVCS and DG placement in distribution networks.

A Comprehensive Review of Artificial Intelligence Algorithms Applications for Distributed Generation Sizing and Location Optimization to Enhance Efficiency and Reliability Indices in Radial Distribution Systems

The research aimed to understand radial distribution systems by defining them and exploring their strategies, and to explore methods for applying artificial intelligence algorithms in radial distribution systems, It also aimed to clarify types of indicators in radial distribution systems, highlighting the importance of providing a scientific and applied framework for integrating artificial intelligence in the field of energy distribution. The significance of the research lies in presenting a comprehensive and up-to-date approach based on the applications of artificial intelligence algorithms to improve the design and organization of distributed production systems in radial distribution systems. By employing a descriptive and analytical approach, the researcher was able to reach several conclusions, with the most prominent being that the application of artificial intelligence algorithms in radial distribution systems contributes to improving energy efficiency by directing it more accurately and effectively, the ability of artificial intelligence to provide precise data-dependent analyses enhances decision-making processes in radial distribution systems, The integration of artificial intelligence techniques contributes to improving overall efficiency in radial distribution systems, reducing energy losses, and enhancing energy distribution effectively. The research recommends enhancing integration between artificial intelligence techniques and radial distribution systems to ensure effective and smooth interaction, thereby increasing efficiency, Priority should be given to the safety and protection of data, and effective cybersecurity measures should be implemented to address the growing challenges in this context.

Allocation and sizing of dispatchable distributed generators considering value addition in resiliency and sustainability of power delivery infrastructure

ABSTRACT The increasing power demand growth and extreme weather conditions push utilities to search for a more sustainable and resilient power distribution infrastructure. Dispatchable distributed generators (DGs) can contribute to achieving the goals. This paper reveals a general framework for allocating dispatchable DGs with their suitable location, capacity, and type in the test distribution networks to bring sustainability and resilient planning synergy. A multiobjective optimization approach has been presented to minimize payback year (PBY) for DGs, enhance the network’s operational efficiency, and promote system resiliency by satisfying various operating constraints. The proposed planning model is structured to give the best possible solution in compliance with changes in seasonal peak demands. The efficacy of the proposed scheme has been tested on a 28-bus Indian distribution system and an IEEE 33-bus test system, and results concerning the number of customers served, and priority customers restored are presented.

Optimal placement and sizing of multiple distributed generators in power distribution networks

The primary objective of power systems is to meet the total power requirement, as well as to retain system reliability and security with the economic operation of the system. In recent years, exponential growth in power demand, lack of investments in up-gradation of electrical infrastructure, shortage in power generation and environmental concerns have been the key factors for unreliable and poor operation of the power systems. To tackle these problems, there is a need to rely on supplementary sources of generation and fortification of transmission capacity. Whereas, installation of large scale new generating units is not economical. An adequate number of small generating units incorporated is a more effective solution to meet the growing power demand. This research work focuses on the enhancement of voltage profiles while curtailing power loss by the optimal sizing and optimal placement of multiple distributed generators (DGs) at different buses. Different types of DG sizing and placement are carried out at 100%, 120% and 140% loading conditions.

A PSO-TVAC for optimal installation of multiple distributed generations in a radial distribution system

<span>The integration of distributed generations (DGs) into distribution system networks has seen a significant increase owing to the depletion of conventional energy resources and the growing power demand. However, a high penetration of DGs can adversely affect the stability of the distribution networks due to the intermittent nature of their generation capabilities. Hence, it is crucial to design DGs optimally to support grid voltage regulation and improve distribution networks performance. This study utilizes a particle swarm optimization (PSO) with time-varying acceleration coefficients (PSO-TVAC) technique to optimize the location and size of various distributed generation units while minimizing the total active power loss. The initial system power loss was determined using a distribution load flow analysis based on the backward-forward technique. The PSO-TVAC algorithm was then employed to identify the optimal placement and sizing of DGs within the standard IEEE 33-bus radial distribution network. To assess the proposed algorithm's effectiveness, photovoltaic (PV) and wind turbine (WT) were considered as the DGs. In comparison with other algorithms, PSO-TVAC achieved the lowest power loss, measuring 72.79 [kW] and 12.14 [kW] for <br /> 3-PV and 3-WT installations, respectively. Furthermore, the optimal installation of 3-PV and 3-WT improved the distribution system performance by 65.49% and 94.25%, respectively.</span>

Strategic Sizing and Placement of Distributed Generation in Radial Distributed Networks Using Multiobjective PSO

Distributed generators (DGs) offer significant advantages to electric power systems, including improved system losses, stability, and reduced losses. However, realizing these benefits necessitates optimal DG site selection and sizing. This study proposes a traditional multiobjective particle swarm optimization (PSO) approach to determine the optimal location and size of renewable energy-based DGs (wind and solar) on the Namibian distribution system. The aim is to enhance voltage profiles and minimize power losses and total DG cost. Probabilistic models are employed to account for the random nature of wind speeds and solar irradiances. This is used in an algorithm which eventually optimizes the siting and sizing of DGs using the nearest main substation as reference. The proposed method is tested on the Vhungu-Vhungu 11 kV distribution network in Namibia. Four cases were considered: base case with no DG, solar power, wind power, and a hybrid of both wind and solar. Optimal values for each case are determined and analyzed: 0.69.93 kW at 26 km for solar PV-based DG and 100 kW at 42 km for wind-based DG. These findings will serve as a valuable blueprint for future DG connections on the Namibian distribution network, providing guidance for optimizing system performance.

A new optimal allocation of DGs in distribution networks by using coot bird optimization method

Energy is one of the most important topics in the world today and is considered as one of the most effective factors for the development of countries. Due to the limitation of non-renewable energy sources and undesirable effects of consuming these resources on the environment, the strategy of countries has changed towards the use of renewable energy. Renewable energy sources do not decrease over time and operate independently of price fluctuations and are more available, thus being able to play a greater role in modern power systems. Therefore, the optimal location and use of these resources will have an impact on modifying the parameters of the power grid. In this paper an analytical approach for optimal placement and sizing of distributed generation (DG) in power distribution networks to minimize the power loss, bus voltage limits, DG capacity limits, current limits, and DG penetration limit. In the first step, determines the DG capacity causing maximum benefit at different buses, and then selects the best location for DG placement which corresponds to highest benefit in the buses. This method is applicable for sizing and siting of single as well as multiple DG units. The coot bird optimization method (CBOM) is proposed for solving optimal placement, size, and power factor (PF) of DG in distribution network. The suggested method is tested on the IEEE 33-bus, 69-bus, Distribution Networks. The proposed CBOM method has good performance to find optimal placement, size, and PF of DG and it can be applied for various distribution system.

Optimal Location and Sizing of Photovoltaic-Based Distributed Generations to Improve the Efficiency and Symmetry of a Distribution Network by Handling Random Constraints of Particle Swarm Optimization Algorithm

Distributed generators (DGs) are increasingly employed in radial distribution systems owing to their ability to reduce electrical energy losses, better voltage levels, and increased dependability of the power supply. This research paper deals with the utilization of a Particle Swarm Optimization algorithm by handling its random constraints to determine the most appropriate size and location of photovoltaic-based DG (PVDG) to keep the asymmetries of the phases minimal in the grid. It is thus expected that this algorithm will provide an efficient and consistent solution to improve the overall performance of the power system. The placement and sizing of the DG are done in a way that minimizes power losses, enhances the voltage profile, i.e., bringing symmetry in the voltage profile of the system, and provides maximum cost savings. The model has been tested on an IEEE 33-bus radial distribution system using MATLAB software, in both conditions, i.e., with and without PVDG. The simulation results were successful, indicating the viability of the proposed model. The proposed PSO-based PVDG model further reduced active power losses as compared to the models based on the teaching–learning artificial bee colony algorithm (TLABC), pathfinder algorithm (PFA), and ant lion optimization algorithm (ALOA). With the proposed model, active power losses have reduced to 17.50%, 17.48%, and 8.82% compared to the losses found in the case of TLABC, PFA, and ALOA, respectively. Similarly, the proposed solution lessens the reactive power losses compared to the losses found through existing TLABC, PFA, and ALOA techniques by an extent of 23.06%, 23%, and 23.08%, respectively. Moreover, this work shows cost saving of 15.21% and 6.70% more than TLABC and ALOA, respectively. Additionally, it improves the voltage profile by 3.48% of the power distribution system.

Comparison of Optimal DG Placement Using GA, PSO and BA for Minimum Real Power Loss in Radial Distribution System

The below paper concentrates on the efficient integration of Renewable Energy Systems as Distributed Generators (DGs) within the distribution sector, aiming to minimize losses occurring from their presence in the system. To achieve this objective, the study proposes the strategic placing and sizing of DGs at optimal locations within the distribution network. To tackle this challenge, four heuristic search-based methods have been carefully selected and applied. The primary objectives of the paper are twofold: Firstly, it seeks to find the ideal location and sizing of DGs by loss minimization criteria. Secondly, the study aims to compare the performance of four chosen heuristic search-based methods TO achieve the loss reduction goals. By evaluating these methods' outcomes, researchers can identify the most effective method for DG placement and its sizing in the radial network. For the analysis, the IEEE 33 radial bus test system is utilized as a representative distribution system.