Size Distribution Of Microplastics Research Articles

From Sea Water to Salt Crystals: An Onsite Investigation of Microplastics in a Conventional Sea Salt Farming System.

This study investigated microplastic (MP) contamination in conventional sea salt farming systems. Various crude sea salt samples (n = 22) that were traditionally produced were collected from salt farms and local vendors. Salt water (n = 15), macroalgae (n = 6), and clay of pond floors (n = 6) were collected from ponds subjected to different production (stabilization, evaporation, and concentration and crystallization concentration) processes. All samples were analyzed for MP abundance and characteristics. The potential sources of MP contamination in the salt were also investigated. The mean abundance of MPs in the salt water and clay of pond floor increased progressively throughout the production process and reached its highest level in the concentration and crystallization ponds (7400 MP particles/m3 in salt water and 19,336 MP particles/m2 in the clay of the pond floor). A maximum of 26,500 MP particles/kg of macroalgal material indicated the potential sink of MPs on the surface of the algae. Approximately 34-2377 MP particles/kg salt were found in the crude sea salt samples. However, the mean abundance (378 MP particles/kg of salt) indicated nonsignificant impacts of different harvesting processes on MP contamination. Most MP size distributions, shapes and polymer types in the salts were similar to those found in the salt water, macroalgae and clay of the pond floor. Approximately 99% of the MPs were fragments that were suspected to be decomposed from larger plastic debris and plastic machinery and tools used at the salt farm. Similar patterns of polymer distribution, in which PP > PE > PET > PS, were found for all samples studied.

New Insights into Microplastic Contamination in Different Types of Leachates: Abundances, Characteristics, and Potential Sources

Municipal solid waste (MSW) is an important destination for abandoned plastics. During the waste disposal process, large plastic debris is broken down into microplastics (MPs) and released into the leachate. However, current research only focuses on landfill leachates, and the occurrence of MPs in other leachates has not been studied. Therefore, herein, the abundance and characteristics of MPs in three types of leachates, namely, landfill leachate, residual waste leachate, and household food waste leachate, were studied, all leachates were collected from the largest waste disposal center in China. The results showed that the average MP abundances in the different types of leachates ranged from (129 ± 54) to (1288 ± 184) MP particles per liter (particles·L−1) and the household food waste leachate exhibited the highest MP abundance (p < 0.05). Polyethylene (PE) and fragments were the dominant polymer type and shape in MPs, respectively. The characteristic polymer types of MPs in individual leachates were different. Furthermore, the conditional fragmentation model indicated that the landfilling process considerably affected the size distribution of MPs in leachates, leading to a higher percentage (> 80%) of small MPs (20–100 μm) in landfill leachates compared to other leachates. To the best of our knowledge, this is the first study discussing the sources of MPs in different leachates, which is important for MP pollution control during MSW disposal.

Impact of a nanofiltration system on microplastic contamination in Geneva groundwater (Switzerland)

Microplastics (MPs) have been observed in the oceans, fresh waters, karstic water and remote water bodies. However, little is known on groundwater contamination, which is a natural resource of utmost importance for millions of people and is often perceived as a reliable source of water. Moreover, nanofiltration is perceived as a reliable technology to remove contaminants from water. In this study, large sample volumes of a silty-sandy gravel aquifer and the corresponding nanofiltered water were analysed for the presence of MPs (> 20 µm) using Fourier transform infrared (FTIR) microscopy. Concentration in ground water was 8 ± 7 MPs/m3 and increased to 36 ± 11 MPs/m3 in nanofiltered water. All MPs had a maximum Ferret diameter lower than 500 µm. Size distribution of MPs was towards the small size class (20–50 µm). In groundwater, 33% of MPs were detected in the smallest size class (20–50 µm) and 67% in the 50–100-µm-size class. In comparison, around 52% of MPs in nanofiltered water were observed in the 20–50 µm size class. Moreover, 33% of the MPs observed in nanofiltered water were in the 50–100 µm size class and 15% in the 100–500-µm-size class. From a chemical point of view, different plastic polymers were identified in groundwater and in nanofiltered water, such as polypropylene (PP), polyvinyl chloride (PVC), ethylene (vinyl acetate) copolymer (EVA), polyethylene (PE), polyethylene terephthalate (PET), polymethyl methacrylate (PMMA) and other polymer materials (such as polystyrene-based copolymers, vinyl-based copolymers). Fibres were observed in all samples, but only a small number of fibres (near 1%) were identified as PP synthetic fibres in nanofiltered water. Furthermore, no clear difference of fibre concentrations was observed between groundwater (232 ± 127 fibres/m3) and nanofiltered water (247 ± 118 fibres/m3). Groundwater had extremely low levels of microplastics, and although the nanofiltration effectively removes suspended particulate matter, it slightly contaminates the filtered water with MPs.

Migration testing of microplastics from selected water and food containers by Raman microscopy

The migration of microplastics (MPs) from plastic food packaging has received increasing attention. Despite numerous studies quantifying MPs released from food packaging, there is lack of systematic investigation on migration of MPs from food packages under US Food and Drug Administration (FDA)’s guidance for food contact substances. Herein, we aimed to determine the quantity and size distribution of MPs migrating from water and food plastic containers following US Food and Drug Administration (FDA)’s guidance using Raman microscopy. Six commonly used water and food containers made of polypropylene (PP), polyethylene terephthalate (PET), polystyrene (PS) were treated using distilled water and food stimulants (10% and 50% ethanol) under various conditions. A range of 23,702 to 490,330 particles per liter MPs with 77%− 92% smaller than 5 µm were detected, in which the PP food container exhibited the highest release of MPs when incubated with 50% ethanol at 130 °C for 15 min (equivalent to heating fatty food in a microwave). The temperature and food types were key attributes for elevating MP migration in general. Further comparison observed direct microwave (534,109 particles per liter) heating led to a significantly higher release of MPs compared to the FDA-suggested method (155,572 particles per liter). Part of MPs (12–63%) failed to be identified by Raman microscopy due to small particle size. Our estimation suggests that individuals might inhale up to 4511 MPs per kg per day. This research offers vital insights into MP migration from food and water containers, aiding in the development of relevant guidelines and facilitating MPs' risk assessment and management.

Modeling impacts of river hydrodynamics on fate and transport of microplastics in riverine environments

Microplastics pose a significant and growing threat to marine ecosystems and human health. Rivers serve as critical pathways for the entry of inland-produced microplastics into marine environments. In this paper, we developed a numerical modeling scheme using OpenFOAM to investigate the fate and transport of microplastics in a river system. Our simulation results show that microplastics undergo significant aggregation and breakage as they are transported downstream by river flows. This significantly alters the particle size distribution of microplastics. The aggregation-breakage process is mainly controlled by river hydrodynamics and pollution scale. Our findings suggest that a significant extent of particle aggregation occurs at an early stage of the release of microplastics in the river, while the aggregation-breakage process becomes limited as the microplastic plume is gradually dispersed and diluted downstream. Eddy diffusivity drives the dispersion of the microplastic plume in the river, and its spatial patterns affect the aggregation-breakage process.

Detection and characterisation of microplastics in animal feed

Microplastics (MPs) the products of plastic breakdown, are entering the environment as a result of plastic abuse, which are of size less than 5mm. Due to their ubiquitous nature, MPs have become a significant environmental concern. One alarming area of MPs contamination is their potential presence in the feed of edible animal species. Growing research suggests that MPs can enter food products and subsequently move to various trophic levels of food chains. Hence, assessing the threat of MPs contamination in animal feed is important for food security and human health. In this investigation, 36 livestock and poultry feed samples were collected from 12 different farms, MPs were detected using Fourier Transform Infrared Spectroscopy (FTIR) and Differential Scanning Calorimeter (DSC). The Nano particle analyser was used to determine the size distribution, and Pyrolysis-GC/MS was used to quantify MPs. According to the findings, all the feed samples contained a significant amount of Polyethylene terephthalate (PET), Polypropylene (PP), and Polyvinyl chloride (PVC) and the particle size ranged from 2.02 to 10.7 µm. Present study has given detailed information on the size distribution of MPs in animal feed, which is thought to enable them to pass through membrane barriers. From the findings it is evident that there are high chances of MPs entering animal feed due to the continuous contact of the feed with plastic-based materials. These MPs can accumulate in the tissues of animals and potentially be transferred to humans through the consumption of meat, milk, and other animal-derived products. Subsequently these MPs can finally bio-accumulate in humans and cause serious health issues.

A nationwide monitoring of atmospheric microplastic deposition

Plastic production continues to increase every year, yet it is widely acknowledged that a significant portion of this material ends up in ecosystems as microplastics (MPs). Among all the environmental compartments affected by MPs, the atmosphere remains the least well-known. Here, we conducted a one-year simultaneous monitoring of atmospheric MPs deposition in ten urban areas, each with different population sizes, economic activities, and climates. The objective was to assess the role of the atmosphere in the fate of MPs by conducting a nationwide quantification of atmospheric MP deposition. To achieve this, we deployed collectors in ten different urban areas across continental Spain and the Canary Islands. We implemented a systematic sampling methodology with rigorous quality control/quality assurance, along with particle-oriented identification and quantification of anthropogenic particle deposition, which included MPs and industrially processed natural fibres. Among the sampled MPs, polyester fibres were the most abundant, followed by acrylic polymers, polypropylene, and alkyd resins. Their equivalent sizes ranged from 22 μm to 398 μm, with a median value of 71 μm. The particle size distribution of MPs showed fewer large particles than expected from a three-dimensional fractal fragmentation pattern, which was attributed to the higher mobility of small particles, especially fibres. The atmospheric deposition rate of MPs ranged from 5.6 to 78.6 MPs m−2 day−1, with the higher values observed in densely populated areas such as Barcelona and Madrid. Additionally, we detected natural polymers, mostly cellulosic fibres with evidence of industrial processing, with a deposition rate ranging from 6.4 to 58.6 particles m−2 day−1. There was a positive correlation was found between the population of the study area and the median of atmospheric MP deposition, supporting the hypothesis that urban areas act as sources of atmospheric MPs. Our study presents a systematic methodology for monitoring atmospheric MP deposition.

Abundance and characteristics of microplastics in a freshwater river in northwestern Himalayas, India - Scenario of riverbank solid waste disposal sites

Microplastics (MPs) are one of the challenging and established contaminants that have adverse implications on human health. The focus of this study was to quantify and analyze the contribution of unscientific municipal solid waste (MSW) disposal sites to the MPs in the Jhelum River and the risk associated with it. Quantitative analysis of our study showed a mean MP concentration of 1474 ± 1026 particles/m3 for the entire stretch of the river. All the sites confirmed the presence of MPs with the concentration ranging from 600 particles/m3 to 2500 particles/m3. The size distribution of MPs suggested that 34 % of the microplastics ranged between 300 μm to 75 μm while 66 % of the particles varied between 300 μm to 5 mm. The concentrations of MPs downstream of unscientific disposal sites were found to increase threefold to that of upstream. The Fourier Transform Infrared Spectroscopy (FT-IR) confirmed the presence of polyethylene (PE) in the majority followed by polyvinyl chloride (PVC) and polypropylene (PP). The flakes were dominant throughout the river followed by filaments, fragments, and spherules. Count based Pollution level indexing (PLI) estimated 3–14 times MP contamination in the river with respect to contamination in glacial runoffs. The risk assessment study of the MPs indicated an increase of around 10.2 % in ingestion rates of MPs due to the unscientific disposal of MSW on the banks of the freshwater body. The values of polymer hazard index (PHI) and potential ecological risk index (PERI) were in the extreme case of pollution (PHI>1000 and PERI>1200). This study manifests the adversities of unscientific municipal solid waste disposal for timely waste management.

Occurrence and size distribution study of microplastics in household water from different cities in continental Spain and the Canary Islands

The purpose of this study was to investigate the occurrence of microplastics (MPs) in drinking water in Spain by comparing tap water from different locations using common sampling and identification procedures. We sampled tap water from 24 points in 8 different locations from continental Spain and the Canary Islands by means of 25 μm opening size steel filters coupled to household connections. All particles were measured and spectroscopically characterized including not only MPs but also particles consisting of natural materials with evidence of industrial processing, such as dyed natural fibres, referred insofar as artificial particles (APs). The average concentration of MPs was 12.5 ± 4.9 MPs/m3 and that of anthropogenic particles 32.2 ± 12.5 APs/m3. The main synthetic polymers detected were polyamide, polyester, and polypropylene, with lower counts of other polymers including the biopolymer poly(lactic acid). Particle size and mass distributions were parameterized by means of power law distributions, which allowed performing estimations of the concentration of smaller particles provided the same scaling parameter of the power law applies. The calculated total mass concentration of the identified MPs was 45.5 ng/L. The observed size distribution of MPs allowed an estimation for the concentration of nanoplastics (< 1 µm) well below the ng/L range; higher concentrations are not consistent with scale invariant fractal fragmentation. Our findings showed that MPs in the drinking water sampled in this work do not represent a significant way of exposure to MPs and would probably pose a negligible risk for human health.

Correlation of Microplastic Size Distribution and Water Quality Parameters in the Upstream Brantas River

Microplastics are contaminants resulting from plastic fragmentation with a size &lt;5 mm. The spread of microplastics threatens the imbalance of the environment and organisms in the waters. So it is necessary to know the abundance, size distribution, and correlation between microplastic abundance and water quality parameters. This study used a quantitative descriptive method with purposive sampling. The study parameters included total microplastic abundance, microplastic abundance based on size characteristics, type of microplastic polymer, water quality parameters, and correlation between microplastic abundance and water quality. Calculating the total abundance of microplastics obtained a value range of 3311.11 – 18111.11 particles/m3. The results of the microplastic size distribution got the highest abundance percentage value in the class with a size &lt;50 µm, which was 84.39%. There were eight types of polymers identified, including Polyethylene (PE), Polyvinyl chloride (PVC), Polypropylene (PP), High-density polyethylene (HDPE), Low-density polyethylene (LDPE, Polyethylene terephthalate (PET), Polycarbonate (PC), and Nylon. Water quality measurements obtained temperature range of 17.37-26.63 °C, pH value range of 6.66-8.51, current velocity value range of 0.13-0.8 m/s, DO value range of 4, 32-6.103 ppm, BOD value range of 4.69-6.07 ppm and TSS value range 0.005-0.019 ppm. Correlation analysis using the Canonical Correlation Analysis (CCA) statistical method. The study showed that water quality parameters such as temperature, current velocity, and DO have a high score of 0.95, 0.83, and 0.8.

Urban stormwater microplastic size distribution and impact of subsampling on polymer diversity.

Understanding not only microplastic (MP) concentration but also size distribution, morphology, and polymer profiles is desirable for stormwater, which is an important pathway of entry for MP into the aquatic environment. A challenge is that subsampling is often required for analysis of environmental samples and the impact of subsampling on the stormwater MP concentration determined and the polymer types identified is poorly characterized. To address this, MP were extracted from urban and suburban stormwater, including from green infrastructure. Fourier Transform Infrared microscopy was performed to characterize MP. In addition, particle dimensions and morphology were recorded. Varying the number of 63-250 μm particles subsampled per sample demonstrated the coefficient of variation for concentration (standard deviation/mean) for most samples was <0.3 when 20 particles (0.8-15% of total particles) or <0.2 when 30 particles (1.2-24% of total particles) per sample were analyzed. MP concentrations in the 63-250 μm size class ranged from 15 to 303 MP/L, one to two orders of magnitude greater than observed in previously reported paired samples from the 250-500 or 500-2000 μm size classes. A total of 25 plastic polymer types were observed across samples, more than observed in the large size classes. Spectral signatures of surface oxidation indicative of weathering were observed on most polyethylene, polypropylene, and polystyrene particles, which were the most abundant polymer types. Fragments were the dominant morphology with an average maximum length of 158 ± 92 μm. Overall, these results may help inform subsampling methods and be useful in future exposure assessments for aquatic organisms or design of MP removal technologies for urban and suburban stormwater.

Quantification analysis of microplastics released from disposable polystyrene tableware with fluorescent polymer staining

Ingesting microplastics (MPs) from plastic tableware is an important source of health risk to human bodies. However, the comprehensive information of MPs released from disposable tableware has not been explored. Herein, a new visual quantification method for polystyrene MPs is proposed with carbon nitride fluorescent polymers staining, which can overcome the disadvantages of high signal background and photobleaching derived from organic dyes staining. Combining with fluorescence microscope and ImageJ software, the quantity, shape, and size distribution of MPs carried by the brand-new disposable polystyrene tableware (DPT) samples before usage and released from the clean DPT samples in different simulated usage scenes were studied. The brand-new DPT samples were found to carry a large number of MPs particles and the clean DPT samples could release MPs during usage. Fiber and fragment are the main morphology of the detected MPs and fiber accounts for 45–52 %. The particles with size <50 μm are the majority of the detected MPs and the distribution fraction of MPs particles is gradually decreased with the raising of particle size within 50 μm. The released MPs particles are increased with the raising of contact time and temperature, and greatly boosted for the DPT samples with cracks. The DPT samples are more like to release MPs in weak acidic condition (pH 4.0) than in weak alkaline (pH 8.3) and neutral (pH 7.0) conditions. The obtained results help to assess the food safety of tack-out food and the health risk of MPs exposure to human.

Microplastics Concentrations in Soil Along a Racetrack

Motorsport is known for its high tire wear due to speed, cornering, and high acceleration/deceleration activities. However, studies on the generation of microplastics from racetracks are rare. This study aimed at quantifying microplastics concentrations in topsoil (0–5 cm) along a racetrack. The results showed that rubber materials (RM) and tire reinforcement microplastics (TRMP) were deposited in the soil along the racetrack. Concentrations of the two microplastics were affected by the distance from the edge of the racetrack (highest concentrations within 20 cm from the track) and track alignment (highest concentrations at the start/finish area). In addition, a weak correlation was observed between the concentrations of the two microplastics, suggesting the effect of track alignment on the type of microplastics abraded. The results also showed that coarser microplastics (1000–5000 μm) dominate the size distribution of microplastics along a racetrack. The findings of this study may provide racetrack managers with basic information for designing microplastic-controlling solutions. While additional studies are required to map environmental effects and policy measures, our initial results suggest that motorsport is of concern in terms of microplastics release to the environment.

Abundance and distribution of microplastics in surface waters of the Kattegat/ Skagerrak (Denmark)

Microplastics (MPs) are ubiquitous pollutants in the ocean, and there is a general concern about their persistence and potential effects on marine ecosystems. We still know little about the smaller size-fraction of marine MPs (MPs <300 μm), which are not collected with standard nets for MPs monitoring (e.g., Manta net). This study aims to determine the concentration, composition, and size distribution of MPs down to 10 μm in the Kattegat/Skagerrak area. Surface water samples were collected at fourteen stations using a plastic-free pump-filter device (UFO sampler) in October 2020. The samples were treated with an enzymatic-oxidative method and analyzed using FPA-μFTIR imaging. MPs concentrations ranged between 11 and 87 MP m−3, with 88% of the MPs being smaller than 300 μm. The most abundant shape of MPs were fragments (56%), and polyester, polypropylene, and polyethylene were the dominant synthetic polymer types. The concentration of MPs shows a significant positive correlation to the seawater density. Furthermore, there was a tendency towards higher MPs concentrations in the Northern and the Southern parts of the study area. The concentration of MPs collected with the UFO sampler was several orders of magnitude higher than those commonly found in samples collected with the Manta net due to the dominance of MP smaller size fractions. Despite the multiple potential sources of MPs in the study area, the level of MPs pollution in the surface waters was low compared (<100 MP m−3) to other regions. The concentrations of MPs found in the studied surface waters were six orders of magnitude lower than those causing negative effects on pelagic organisms based on laboratory exposure studies, thus is not expected to cause any impact on the pelagic food web.

Contamination of sea surface water offshore the Tokai region and Tokyo Bay in Japan by small microplastics.

A nested double neuston net was prepared and used to collect samples from the surface of coastal waters around Japan to obtain information about the properties of both small microplastics (SMPs; <350μm) and large microplastics (LMPs; >350μm). The SMP concentrations ranged from 1000 to 5900 pieces m-3 in the open ocean and averaged approximately 3000 pieces m-3 in the inner part of Tokyo Bay. The SMP concentrations were around 20-60 times greater than the LMP concentrations. By analyzing the seawater, we obtained a microplastic size distribution that spanned 50-5000μm. The LMPs mainly comprised packaging-related plastics, such as polyethylene (PE) and polypropylene, while the SMPs were dominated by paint-related plastics. SMPs derived from packaging materials (e.g., PE) may have gradually sank down from the sea surface when they were smaller than 600μm.

Abundance, Composition, and Potential Ecological Risks of Microplastics in Surface Water at Different Seasons in the Pearl River Delta, China

In this study, microplastics in the surface water in the Pearl River Delta during different seasons were studied to analyze their temporal and spatial distribution, morphological characteristics, related socio-economic indicators, and potential ecological risks. Based on an analysis of surface water samples from 13 sampling sites, we found that the temporal and spatial distribution of microplastics in the Pearl River Delta were unbalanced. The microplastic abundances at the Qingqi, Chencun, Zuotan, and Beijiao sites were tremendously higher than those at other sites. Nevertheless, the abundance of microplastics at most sites was tremendously higher in the rainy season than dry season. Meanwhile, the morphological characteristics of microplastics had a strong correlation with the changes of season and site location. During the rainy season, the major color, shape, and size distribution of microplastics were gray (38.64%), strip (78.29%), and 100–500 μm (57.38%), respectively. The most usual color, shape, and size distribution of microplastics in the dry season were black (38.64%), granular (78.29%), and 0–100 μm (70.29%), respectively. As for the socio-economic indicators, including the degree of afforestation as well as the extent of industrial, transportation, and other human activities, all had varying degrees of impact on microplastic abundances. The potential ecological risk assessments demonstrated that most sites in the Pearl River Delta had a high potential for ecological risk related to microplastic pollution, which should be given more attention in the future. In summary, our investigations offer a theoretical basis for research related to microplastics in the Pearl River Delta and can further improve our understanding of the need to protect aquatic environments by exploring the overall ecological risks posed by microplastics.

A quantitative and qualitative assessment of microplastics collected at two public beaches along the east and south-east coast of Mauritius.

Microplastics had been collected at two sites namely Trou d'eau Douce (TD) and La Cambuse (LC) public beaches, lying in the east coast and south-east coast of Mauritius, respectively, over 6months from September 2019 to February 2020. The sizes of the latter varied from 180µm to 4mm. A higher amount of microplastics collected/6-kg sand sample was recorded at LC. Two-way ANOVA revealed that (1) there was a considerable gap in the variability regarding quantity and size distribution of microplastics on the two beaches. The post-hoc analysis showed that the majority of the microplastics at LC were > 1.40mm, whereas the smaller plastic fragments < 1.40mm were more dominant at TD. (2) There was a significant interaction between location and event (p value = 0.025). The post-hoc analysis showed that the torrential rain hitting the island prior to sampling week 7 had decreased the microplastic counts at both TD and LC, but not significantly. Interestingly, the two hurricanes, prior to weeks 8 and 9, had appreciably reduced the microplastic counts at TD and, on the other hand, there was an increase in the amount of microplastics at LC, but not to a significant effect. The chemical nature (qualitative analysis) of microplastics was determined by density flotation and FTIR spectroscopy. Microplastics at TD were exclusively high-density polyethylene (HDPE) in origin, whereas, at LC, microplastics were both HDPE and polypropylene (PP) in origin.

Relative exposure to microplastics and prey for a pelagic forage fish

In the global ocean, more than 380 species are known to ingest microplastics (plastic particles less than 5 mm in size), including mid-trophic forage fishes central to pelagic food webs. Trophic pathways that bioaccumulate microplastics in marine food webs remain unclear. We assess the potential for the trophic transfer of microplastics through forage fishes, which are prey for diverse predators including commercial and protected species. Here, we quantify Northern Anchovy (Engraulis mordax) exposure to microplastics relative to their natural zooplankton prey, across their vertical habitat. Microplastic and zooplankton samples were collected from the California Current Ecosystem in 2006 and 2007. We estimated the abundance of microplastics beyond the sampled size range but within anchovy feeding size ranges using global microplastic size distributions. Depth-integrated microplastics (0–30 m depth) were estimated using a depth decay model, accounting for the effects of wind-driven vertical mixing on buoyant microplastics. In this coastal upwelling biome, the median relative exposure for an anchovy that consumed prey 0.287–5 mm in size was 1 microplastic particle for every 3399 zooplankton individuals. Microplastic exposure varied, peaking within offshore habitats, during the winter, and during the day. Maximum exposure to microplastic particles relative to zooplankton prey was higher for juvenile (1:23) than adult (1:33) anchovy due to growth-associated differences in anchovy feeding. Overall, microplastic particles constituted fewer than 5% of prey-sized items available to anchovy. Microplastic exposure is likely to increase for forage fishes in the global ocean alongside declines in primary productivity, and with increased water column stratification and microplastic pollution.

Validation of sample preparation methods for small microplastics (≤10 µm) in wastewater effluents

The interest to monitor microplastics in various environmental matrices has grown substantially in recent years. However, monitoring microplastics remains a challenge due to interactions with complex environmental matrices, especially those rich in natural organic matter (NOM) like wastewater effluents. Therefore, sample preparation methods are needed to remove NOM and ensure minimal interference during analysis. So far, there have been only a few attempts to standardize and validate the effects of sample preparation methods on microplastics. However, no efforts exist that validated the impacts of sample preparation methods on small microplastic particles (≤10 µm). Those smaller particles might be more susceptible to adverse effects after chemical digestion as a result of the increased surface area to mass ratio, compared to their larger counterparts. In this study, pellets from six polymers were successfully tagged with a fluorescent dye and subsequently fractured using ultrasound treatment to produce small particles of tagged microplastic. The generated microplastics (≤10 µm) were then subjected to two sample preparation methods that were previously validated for wastewater effluents, namely Fenton and hydrogen peroxide oxidation. The effects on microplastics were assessed using size distribution changes, which were measured via fluorescence microscopy. Results revealed some large changes in the size distribution of microplastics (≤10 µm) after applying Fenton and hydrogen peroxide. However, these changes were largely reduced when excluding particles < 1 µm. The results indicated that, for the most part, both sample preparation methods can be used for small microplastic particles (1–10 µm), whereas hydrogen peroxide is more suitable if nanoplastics (<1µm) are to be investigated.

Sources, concentrations, distributions, fluxes and fate of microplastics in a hypersaline lake: Maharloo, south-west Iran

Hypersaline lakes support unique ecosystems and biogeochemistries but are often subject to anthropogenic pressures from pollution, water abstraction-diversion and climate change. Less understood, however, are the inputs, distributions and impacts of microplastics (MPs) in hypersaline environments. In this study, MPs are determined in water and sediment cores of Maharloo Lake, south-west Iran, and in the anthropogenically-impacted rivers that recharge the lake. MP concentrations in river water ranged from 0.05 MP L−1 in the headwaters to about 2 MP L−1 downstream of industrial effluents, with intermediate (but elevated) concentrations observed in the lake. The maximum surface concentration in lake sediment cores was about 860 MP kg−1, and concentrations displayed a progressive reduction with increasing depth down to 50 cm that are qualitatively consistent with temporal changes in plastic production. The size distribution of MPs was skewed towards the finest fraction (< 100 μm) and the most abundant polymer types were polyethylene terephthalate, polyethylene and nylon. Flux calculations using river water data and published atmospheric deposition data for the region reveal that the atmosphere is, by at least an order of magnitude, the more important source. MPs added to the lake appear to be maintained in suspension by high density water but are subsequently deposited to sediments by encapsulation and nucleation as salts precipitate. In addition, it is proposed that direct atmospheric deposition to sediment takes place on areas that seasonally dry out and are subsequently inundated. The impacts of MPs on hypersaline ecosystems and biomass resources are unknown but warrant investigation.