Site-specific Chemical Modification Research Articles

Copper assisted sequence-specific chemical protein conjugation at a single backbone amide

Direct, site-specific methods of protein functionalization are highly desirable for biotechnology. However, such methods are challenging due to the difficulty of chemically differentiating a single site within a large protein. Herein, we propose “metal binding targeting” strategy and develop a Copper Assisted Sequence-specific conjugation Tag (CAST) method to achieve rapid (second order rate 8.1 M−1 s−1), site-specific protein backbone chemical modification with pinpoint accuracy. We demonstrate the versatility of CAST conjugation by preparing various on-demand modified recombinant proteins, including a homogeneous antibody-drug conjugate with high plasma stability and potent efficacy in vitro and in vivo. Thus, CAST provides an efficient and quantitative method to site-specifically attach payloads on large, native proteins.

Synthetic α-Helical Nanopore Reactor for Chemical Sensing.

The use of nanopores for the single-molecule sensing of folded proteins and biomacromolecules has recently gained attention. Here, we introduce a simplified synthetic α-helical transmembrane pore, pPorA, as a nanoreactor and sensor that exhibits functional versatility comparable to that of engineered protein and DNA nanopores. The pore, built from the assembly of synthetic 40-amino-acid-long peptides, is designed to contain cysteine residues within the lumen and at the pore terminus for site-specific chemical modification probed using single-channel electrical recordings. The reaction of the pore with differently charged activated thiol reagents was studied, wherein positively charged reagents electrophoretically driven into the pore resulted in pore blocking in discrete steps upon covalent bond formation. The asymmetric blockage patterns resulting from cis and trans-side addition of reagents reveal the pore orientation in the lipid membrane. Furthermore, activated PEG thiols covalently blocked the pores over a longer duration in a charge-independent manner, establishing the large diameter and orientation of the formed pores. While the covalent binding of thiol reagents caused a drop in the pore conductance, cationic cyclic octasaccharides produced time-resolved translocation events, confirming the structural flexibility and tunability of the pores. The ability of the pore to accommodate large analytes and the considerable current amplitude variation following bond formation events are promising for developing platforms to resolve multistep chemical reactions at the single-molecule level for applications in synthetic nanobiotechnology.

Site-Specific Chemical Modification of a Cytokine Mimic for Small Molecule-Based Tumor Targeting.

The targeted delivery of bioactive proteins, such as cytokines, for cancer immunotherapy approaches mostly relies on antibodies or antibody fragments. However, fusion proteins may display low tissue penetration due to a large molecular size. Small molecule ligands with high affinity toward tumor-associated antigens provide a promising alternative for the selective delivery of cytokines to tumor lesions. We developed a one-pot procedure for the site-specific thiazolidine formation between an aldehyde bearing small molecule and the in situ generated N-terminal cysteine of a bioactive protein. Thereby, neoleukin-2/15 (Neo-2/15), a computationally engineered interleukin-2 and -15 mimic, was chemically conjugated to acetazolamide plus, a potent carbonic anhydrase IX (CAIX) ligand. The conjugate retained the biological activity of Neo-2/15 and revealed its ability to accumulate in renal cell carcinoma (SK-RC-52) xenografts upon systemic intravenous administration. The results highlight the potential of small molecule targeting moieties to drive the accumulation of a protein cargo to the respective disease site while conserving the small construct size.

Artificial primary-miRNAs as a platform for simultaneous delivery of siRNA and antisense oligonucleotide for multimodal gene regulation.

Self-assembled nucleic acid nanostructures have been widely explored for gene therapy applications due to their unique advantages. Their roles are not limited to offer intracellular delivery platforms but additionally provide a biological function to induce targeted gene regulation. Here, we report a self-assembled artificial primary-miRNA (pri-miRNA) for achieving simultaneous multimodal gene regulation. Artificial pri-miRNAs are designed to play a role as substrate RNAs to recruit and interact with Drosha/DGCR8 (Microprocessor). Incorporation of functional RNA motifs and site-specific chemical modification of the primary miRNA are utilized for the biogenesis of two individual gene-regulating oligonucleotides. Once they are cleaved by the endogenous Drosha/DGCR8 complex, basal strands and pre-miRNA can be generated inside of cells. In this study, we integrated basal strands with either SMN2 ASO or anti-miR21 to induce multimodal gene regulation. Microprocessing and subsequent gene regulation were first evaluated by measuring the activity of reporter pre-miRNA. Chemical modification on the primary miRNA was optimized through a series of in vitro Drosha cleavage tests and targeted gene silencing in cells. Primary miRNA with the basal ASO or anti-miR strands showed a successful in vitro activity and resulted in simultaneous multimodal gene regulation in cells. Artificial primary miRNA may offer synergistic therapeutic effects for treating various diseases, including spinal muscular atrophy and cancer.

Characterization of outcomes of amino acid modifications using a combinatorial approach to reveal physical and structural perturbations: A case study using trastuzumab biosimilar

Biopharmaceuticals, such as monoclonal antibodies, are considered as life-saving drugs for autoimmune diseases, cancer and infectious diseases. However, biotherapeutics tend to undergo chemical degradation during various stages of manufacturing. The conditions of chemical degradation, along with the physical degradation pathways, have a direct influence on the overall stability, safety and efficacy of these therapeutics. While site-specific chemical changes have been well-explored and investigated using various analytical approaches, the resulting conformational and structural changes have not been much studied. Thus, we explored various biophysical techniques for assessing the influence of three representatives forced degradation conditions viz. oxidation, deamidation, and glycation, in a model therapeutic trastuzumab biosimilar. The site-specific modifications caused by these stress conditions were analysed using high resolution mass spectrometry. While their thermodynamic and conformational consequences were investigated by using differential scanning colorimetry (Nano-DSC), circular dichroism (CD) spectroscopy, analytical ultracentrifugation (AUC), and dynamic light scattering (DLS). The investigated stress conditions resulted in reduced thermodynamic stability of mAb, as confirmed using Nano-DSC. Secondary structure analysis performed with CD spectroscopy indicated detectable structural alterations in the beta sheets of stressed samples. DLS and SV-AUC studies demonstrated an enhanced level of aggregation and fragmentation in presence of all stress conditions. Thus, the biophysical analytical toolkits, when used simultaneously, could offer deeper insights into the subtle conformational changes that result from site-specific chemical modifications in mAbs. Hence, these analytical approaches may serve as significant additions to the battery of techniques used for forced degradation analysis of biopharmaceuticals.

Complete Chemical Synthesis of Minimal Messenger RNA by Efficient Chemical Capping Reaction.

Site-specific chemical modification of mRNA can improve its translational efficiency and stability. For this purpose, it is desirable to develop a complete chemical synthesis method for chemically modified mRNA. The key is a chemical reaction that introduces a cap structure into the chemically synthesized RNA. In this study, we developed a fast and quantitative chemical capping reaction between 5'-phosphorylated RNA and N7-methylated GDP imidazolide in the presence of 1-methylimidazole in the organic solvent dimethyl sulfoxide. It enabled quantitative preparation of capping RNA within 3 h. We prepared chemically modified 107-nucleotide mRNAs, including N6-methyladenosine, insertion of non-nucleotide linkers, and 2'-O-methylated nucleotides at the 5' end and evaluated their effects on translational activity in cultured HeLa cells. The results showed that mRNAs with non-nucleotide linkers in the untranslated regions were sufficiently tolerant to translation and that mRNAs with the Cap_2 structure had higher translational activity than those with the Cap_0 structure.

Electric-Field-Induced Solid-Gas Interfacial Chemical Reaction in Carbon Nanotube Ensembles: Route toward Ultra-sensitive Gas Detectors.

The electric field at the sharp pointed tips of single wall carbon nanotube ensembles has been utilized to kinetically accelerate hitherto unobserved chemical reactions at the heterogeneous solid-gas interfaces. The principle of ″action-of-points″ drives specific chemical reactions between the defect sites of single wall carbon nanotubes (CNTs) and ppb levels of gaseous hydrogen sulfide. This is manifested as changes in the electrical conductivity of the conductive CNT-ensemble (cCNT) and visually tracked as enthalpic modulations at the site of the reaction through infrared thermometry. Importantly, the principle has been observed for a variety of analytes such as NH3, H2O, and H2S, leading to distinctly correlatable changes in reactivity and conductivity changes. Theoretical calculations based on the density functional theory in the presence and absence of applied electric field reveal that the applied electric field activates the H2S gas molecules by charge polarization, yielding favorable energetics. These results imply the possibility of carrying out site-specific chemical modifications for nanomaterials and also provide transformative opportunities for the development of miniaturized e-nose-based gas analyzers.

Utilizing a Baculovirus/Insect Cell Expression System and Expressed Protein Ligation (EPL) for Protein Semisynthesis.

Protein semisynthesis has been used for the chemoselective linking of synthetic peptides and recombinant protein fragments to generate complete native proteins in good yield. The ability to site-selectively incorporate multiple post-translational chemical modifications (PTMs) into proteins via this approach shows great potential for enhancing understanding of the molecular basis of protein function and regulation. Protein semisynthesis, however, often requires high expression efficiency of the recombinant protein fragments (i.e., high expression yield and ability to preserve protein biological functions), which can be hard to achieve for some human enzymes when using bacterial expression systems. Here, we describe how to use a baculovirus/insect cell expression system and a protein semisynthesis strategy known as expressed protein ligation (EPL) to produce workable levels of proteins of interest containing site-specific chemical modifications. The protocol provides detailed guidance for generating protein C-terminal thioesters for use with the EPL reaction, performing the EPL reaction, and purifying the protein ligation product. We exemplify the protocols by generating protein kinase Akt1 with site-specific phosphorylations installed into its C-terminal tail, for kinetic kinase assays. We hope these methods will help increase the use of protein semisynthesis for elucidating the post-translational regulation of human enzymes involved in cell signaling. © 2022 Wiley Periodicals LLC Basic Protocol 1: Generation of the N-terminal protein of interest (POI) fragment containing a C-terminal thioester moiety Basic Protocol 2: Expressed protein ligation (EPL) of the protein thioester with a synthetic peptide and purification of the protein ligation product Basic Protocol 3: Semisynthesis and biochemical analysis of site-specifically phosphorylated Akt1.

Site-specific DNA functionalization through the tetrazene-forming reaction in ionic liquids.

Development of multiple chemical tools for deoxyribonucleic acid (DNA) labeling has facilitated wide use of their functionalized conjugates, but significant practical and methodological challenges remain to achievement of site-specific chemical modification of the biomacromolecule. As covalent labeling processes are more challenging in aqueous solution, use of nonaqueous, biomolecule-compatible solvents such as an ionic liquid consisting of a salt with organic molecule architecture, could be remarkably helpful in this connection. Herein, we demonstrate site-specific chemical modification of unprotected DNAs through a tetrazene-forming amine–azide coupling reaction using an ionic liquid. This ionic liquid-enhanced reaction process has good functional group tolerance and precise chemoselectivity, and enables incorporation of various useful functionalities such as biotin, cholesterol, and fluorophores. A site-specifically labeled oligonucleotide, or aptamer interacting with a growth factor receptor (Her2) was successfully used in the fluorescence imaging of breast cancer cell lines. The non-traditional medium-promoted labeling strategy described here provides an alternative design paradigm for future development of chemical tools for applications involving DNA functionalization.

Efficient Human Acute Myeloid Leukemia Targeting By Universal Chimeric Antigen Receptor T-Cells Via Combinatorial Use of Linkers

Chimeric antigen receptor (CAR) T-cells are genetically engineered T-cells with potent biocidal activity against respective target-expressing cells. Recently, CAR T-cells have been successfully used clinically to eradicate B cell-derived malignancies by targeting B-cell lineage specific surface antigens (e.g. CD19, BCMA). However, several limitations of current single-antigen targeting CAR T-cell therapies are becoming evident: a) low target tumor-antigen expression might lead to low CAR T-cell targeting efficacy; b) single antigen-targeting might lead to rapid selection of tumor cells with low or loss of antigen expression; c) single antigen-targeting does frequently not generate a high tumor-selectivity as tumor-antigens are frequently also expressed on healthy tissues; d) production of single-antigen CAR T-cells is time- and resource-consuming but results in effectors that target only one antigen; e) on-target off-tumor as well as off-target side-effects are difficult to control without terminally eliminating CAR T-cells in the recipient. While a-c) might be overcome by combinatorial tumor-antigen targeting, d-e) might be addressed by production of Universal CAR T-cells that recognize a specific tag on selective bridging molecules with short half-life.To address some of these limitations in principle, we have here developed universal CAR T-cells targeting fluorescein, as well as fluorescein-labeled antibody-constructs directed against several cell surface antigens, that would serve as versatile, combinatorial selective linkers and, upon target binding, also CAR T-cells activators. We then tested the system on human acute myeloid leukemia (AML) cell lines and primary patient AML blasts. Specifically, we engineered CAR T-cells, termed FluA-CAR T-cells, to display the anti-fluorescein engineered lipocalin FluA, which mediated recognition of randomly or site-specifically fluorescein-labeled antibodies in IgG or short half-life diabody (Db) format, directed against the frequently AML expressed antigens CD33, CD117 and CD371. Site-specific chemical modification methods and cysteine-tagged Db mediated the strongest AML killing results in vitro over a broad range of antibody concentrations.We then hypothesized that FluA-CAR T-cells, targeting AML cells via combinatorial use of linker molecules adapted to specific AML antigen-expression profiles, would allow to most efficiently eliminate AML cells in a dose- and timely-regulated fashion. To this end, we tested single and combinatorial use of fluoresceinated anti-CD117 Db and anti-CD371 Db on MOLM13 AML cell lines, engineered to be either CD117 highCD371 neg, CD117 negCD371 high, or CD117 highCD371 high. Indeed, combination of anti-CD117 and anti-CD371 Db-linkers, resulted in significantly improved MOLM13 cell lysis compared to equimolar concentrations of single agents in vitro (example figure). We then tested the same approach, targeting CD117 +CD371 + primary AML cells from two different patients, using either patient-derived or allogeneic FluA CAR T-cells. Again, the combinatorial use of linkers generated a significantly higher AML cell lysis than the use of single Db linkers.We thus here provide proof-of-concept for the generation of highly potent universal targeting FluA CAR T-cells from healthy donors and AML patients. By choosing suitable CAR-adaptors with respect to their conjugation chemistry and size, it is possible to tightly regulate CAR-T cell activity against CD33, CD117 and CD371 expressing AML cells and likely any tumor cell expressed antigen. Short half-life small molecule linkers will allow to control FluA CAR T-cell on-off activity and combinatorial use of linkers will allow to maximize anti-tumor activity and to minimize on-target off-tumor toxicity. [Display omitted] DisclosuresMyburgh: University of Zurich: Patents & Royalties: CD117xCD3 TEA. Neri: Philogen S.p.A.: Current Employment, Current equity holder in publicly-traded company, Divested equity in a private or publicly-traded company in the past 24 months, Membership on an entity's Board of Directors or advisory committees, Patents & Royalties: Multiple patents on vascular targeting; ETH Zurich: Patents & Royalties: CD117xCD3 TEA. Manz: CDR-Life Inc: Consultancy, Current holder of stock options in a privately-held company; University of Zurich: Patents & Royalties: CD117xCD3 TEA.

Impact of Ligand Size and Conjugation Chemistry on the Performance of Universal Chimeric Antigen Receptor T-Cells for Tumor Killing.

All Universal Chimeric Antigen Receptor T-cells (UniCAR T-cells) are T-cells which have been engineered to recognize a haptenated ligand. Due to this feature, UniCAR T-cells have the potential to mediate a potent and selective tumor killing only in the presence of a haptenated tumor ligand, thus avoiding the long-lasting biocidal effects of conventional CAR T-cells. We have used fluorescein-labeled versions of small organic ligands and different antibody formats specific to carbonic anhydrase IX (a tumor-associated antigen) in order to assess whether the killing potential of UniCAR T-cells depended on the molecular features of the haptenated molecule. Both small molecule ligands and larger antibody fragments were potent in mediating tumor cell killing over a broad concentration range. Antibodies could be conveniently used both in IgG format and as smaller diabody fragments. Importantly, the use of site-specific chemical modification strategies for the antibody coupling to fluorescein led to a substantial improvement of tumor cell killing performance, compared to the random modification of primary amino groups on the antibody surface.

Genetic Code Expansion, Protein Expression, and Protein Functionalization in Bacillus subtilis.

The site-specific chemical modification of proteins through incorporation of noncanonical amino acids enables diverse applications, such as imaging, probing, and expanding protein functions, as well as to precisely engineer therapeutics. Here we report a general strategy that allows the incorporation of noncanonical amino acids into target proteins using the amber suppression method and their efficient secretion in the biotechnological relevant expression host Bacillus subtilis. This facilitates efficient purification of target proteins directly from the supernatant, followed by their functionalization using click chemistry. We used this strategy to site-specifically introduce norbornene lysine into a single chain antibody and functionalize it with fluorophores for the detection of human target proteins.

A mesophilic cysteine-less split intein for protein trans-splicing applications under oxidizing conditions

Split intein-mediated protein trans-splicing has found extensive applications in chemical biology, protein chemistry, and biotechnology. However, an enduring limitation of all well-established split inteins has been the requirement to carry out the reaction in a reducing environment due to the presence of 1 or 2 catalytic cysteines that need to be in a reduced state for splicing to occur. The concomitant exposure of the fused proteins to reducing agents severely limits the scope of protein trans-splicing by excluding proteins sensitive to reducing conditions, such as those containing critical disulfide bonds. Here we report the discovery, characterization, and engineering of a completely cysteine-less split intein (CL intein) that is capable of efficient trans-splicing at ambient temperatures, without a denaturation step, and in the absence of reducing agents. We demonstrate its utility for the site-specific chemical modification of nanobodies and an antibody Fc fragment by N- and C-terminal trans-splicing with short peptide tags (CysTag) that consist of only a few amino acids and have been prelabeled on a single cysteine using classical cysteine bioconjugation. We also synthesized the short N-terminal fragment of the atypically split CL intein by solid-phase peptide synthesis. Furthermore, using the CL intein in combination with a nanobody-epitope pair as a high-affinity mediator, we showed chemical labeling of the extracellular domain of a cell surface receptor on living mammalian cells with a short CysTag containing a synthetic fluorophore. The CL intein thus greatly expands the scope of applications for protein trans-splicing.

Autonomously Assembled Synthetic Transmembrane Peptide Pore.

The porinACj is an α-helical porin that spans the mycolic acid outer membrane of Gram-positive mycolate, Corynebacterium jeikeium. Here, we report that a 40-aminoacid, synthetic peptide, pPorA corresponding to porin PorACj, inserts into the lipid bilayers and forms well-defined pores. By electrical recordings, we measured the single-channel properties that revealed the autonomous assembly of large conductance ion-selective synthetic pores. Further, we characterized the functional properties by blocking the peptide pores by cyclodextrins of different charge and symmetry. We deduced the subunit stoichiometry and putative structure of the pore by site-specific chemical modification in single-channel electrical recordings and gel electrophoresis. On the basis of these findings, we suggest that this is a large functional uniform transmembrane pore built entirely from short synthetic α-helical peptides. Accordingly, we propose a model demonstrating structural assembly of large α-helix-based peptide pores for understanding the action of antimicrobial peptides and for the design of pores with applications in biotechnology.

Dinitroimidazoles as bifunctional bioconjugation reagents for protein functionalization and peptide macrocyclization

Efficient and site-specific chemical modification of proteins under physiological conditions remains a challenge. Here we report that 1,4-dinitroimidazoles are highly efficient bifunctional bioconjugation reagents for protein functionalization and peptide macrocyclization. Under acidic to neutral aqueous conditions, 1,4-dinitroimidazoles react specifically with cysteines via a cine-substitution mechanism, providing rapid, stable and chemoselective protein bioconjugation. On the other hand, although unreactive towards amine groups under neutral aqueous conditions, 1,4-dinitroimidazoles react with lysines in organic solvents in the presence of base through a ring-opening & ring-close mechanism. The resulting cysteine- and lysine-(4-nitroimidazole) linkages exhibit stability superior to that of commonly employed maleimide-thiol conjugates. We demonstrate that 1,4-dinitroimidazoles can be applied in site-specific protein bioconjugation with functionalities such as fluorophores and bioactive peptides. Furthermore, a bisfunctional 1,4-dinitroimidazole derivative provides facile access to peptide macrocycles by crosslinking a pair of cysteine or lysine residues, including bicyclic peptides of complex architectures through highly controlled consecutive peptide macrocyclization.

Site-Specific Chemical Conjugation of Antibodies by Using Affinity Peptide for the Development of Therapeutic Antibody Format.

Artificially modified IgG molecules are increasingly utilized in industrial and clinical applications. In the present study, the method of chemical conjugation by affinity peptide (CCAP) for site-specific chemical modification has been developed by using a peptide that bound with high affinity to human IgG-Fc. This method enabled a rapid modification of a specific residue (Lys248 on Fc) in a one-step reaction under mild condition to form a stable amide bond between the peptide and Fc. The monovalent peptide-IgG conjugate not only maintained complete antigen binding but also bound to Fc receptors (FcRn, FcγRI, and FcγRIIIa), indicating that it is a suitable conjugate form that can be further developed into highly functional antibody therapeutics. CCAP was applied for the preparation of an antibody-drug conjugate and a bispecific antibody to demonstrate the usefulness of this method.

Knock-Down of a Novel snoRNA in Tetrahymena Reveals a Dual Role in 5.8S rRNA Processing and Generation of a 26S rRNA Fragment.

In eukaryotes, 18S, 5.8S, and 28S rRNAs are transcribed as precursor molecules that undergo extensive modification and nucleolytic processing to form the mature rRNA species. Central in the process are the small nucleolar RNAs (snoRNAs). The majority of snoRNAs guide site specific chemical modifications but a few are involved in defining pre-rRNA cleavages. Here, we describe an unusual snoRNA (TtnuCD32) belonging to the box C/D subgroup from the ciliate Tetrahymena thermophila. We show that TtnuCD32 is unlikely to function as a modification guide snoRNA and that it is critical for cell viability. Cell lines with genetic knock-down of TtnuCD32 were impaired in growth and displayed two novel and apparently unrelated phenotypes. The most prominent phenotype is the accumulation of processing intermediates of 5.8S rRNA. The second phenotype is the decrease in abundance of a ~100 nt 26S rRNA fragment of unknown function. Sequence analysis demonstrated that TtnuCD32 share features with the essential snoRNA U14 but an alternative candidate (TtnuCD25) was more closely related to other U14 sequences. This, together with the fact that the observed rRNA processing phenotypes were not similar to what has been observed in U14 depleted cells, suggests that TtnuCD32 is a U14 homolog that has gained novel functions.

One-Pot Dual Labeling of IgG 1 and Preparation of C-to-C Fusion Proteins Through a Combination of Sortase A and Butelase 1.

Site-specific chemical modification of proteins can assist in the study of their function. Furthermore, these methods are essential to develop biologicals for diagnostic and therapeutic use. Standard protein engineering protocols and recombinant expression enable the production of proteins with short peptide tags recognized by enzymes capable of site-specific modification. We report here the application of two enzymes of orthogonal specificity, sortase A and butelase 1, to prepare non-natural C-to-C fusion proteins. Using these enzymes, we further demonstrate site-selective installation of different chemical moieties at two sites in a full-size antibody molecule.

Modulation of the Catalytic Properties of Lipase B from Candida antarctica by Immobilization on Tailor-Made Magnetic Iron Oxide Nanoparticles: The Key Role of Nanocarrier Surface Engineering.

The immobilization of biocatalysts on magnetic nanomaterial surface is a very attractive alternative to achieve enzyme nanoderivatives with highly improved properties. The combination between the careful tailoring of nanocarrier surfaces and the site-specific chemical modification of biomacromolecules is a crucial parameter to finely modulate the catalytic behavior of the biocatalyst. In this work, a useful strategy to immobilize chemically aminated lipase B from Candida antarctica on magnetic iron oxide nanoparticles (IONPs) by covalent multipoint attachment or hydrophobic physical adsorption upon previous tailored engineering of nanocarriers with poly-carboxylic groups (citric acid or succinic anhydride, CALBEDA@CA-NPs and CALBEDA@SA-NPs respectively) or hydrophobic layer (oleic acid, CALBEDA@OA-NPs) is described. After full characterization, the nanocatalysts have been assessed in the enantioselective kinetic resolution of racemic methyl mandelate. Depending on the immobilization strategy, each enzymatic nanoderivative permitted to selectively improve a specific property of the biocatalyst. In general, all the immobilization protocols permitted loading from good to high lipase amount (149 < immobilized lipase < 234 mg/gFe). The hydrophobic CALBEDA@OA-NPs was the most active nanocatalyst, whereas the covalent CALBEDA@CA-NPs and CALBEDA@SA-NPs were revealed to be the most thermostable and also the most enantioselective ones in the kinetic resolution reaction (almost 90% ee R-enantiomer). A strategy to maintain all these properties in long-time storage (up to 1 month) by freeze-drying was also optimized. Therefore, the nanocarrier surface engineering is demonstrated to be a key-parameter in the design and preparation of lipase libraries with enhanced catalytic properties.

Production and characterization of a novel site-specific-modifiable anti-OX40-receptor single-chain variable fragment for targeted drug delivery

OX40 receptor (tumor necrosis factor receptor superfamily, member 4; CD134) is a T-cell co-stimulatory molecule that plays an important role in T-cell activation and survival. OX40 receptor is activated by its ligand, OX40L; and modulation of the OX40–OX40L interaction is a promising target for the treatment of autoimmune diseases and cancers. Here, we generated a high-affinity anti-OX40 single-chain variable fragment carrying a C-terminal cysteine residue (scFvC). Physicochemical and functional analyses revealed that the scFvC bound to OX40-expressing cells and was internalized via OX40-mediated endocytosis without inducing phosphorylation of IκBα (nuclear factor of kappa light polypeptide gene enhancer in B-cells inhibitor, alpha), an important complex in the classical NFκB (nuclear factor kappa-light-chain-enhancer of activated B cells) signaling pathway. In addition, mutation of the 36th cysteine residue in variable region of light chain enabled site-specific chemical modification to carboxy terminal cysteine and improved the thermal stability of the scFvC. These results suggest that this novel high-affinity anti-OX40 scFvC may be useful as a transporter for targeted delivery of small compounds, proteins, peptides, liposomes, and nanoparticles, into OX40-expressing cells for the treatment of autoimmune diseases and cancers.