Sinusoidal Voltage Source Research Articles

Control Performance Assessment of a Zero Harmonic Distortion Grid-Forming Converter for Medium Voltage Islanded Microgrids

The world is currently witnessing a rapid transformation in the production and utilization of electrical energy. The traditional centralized generation model for electric power is swiftly evolving into a more decentralized system, known as Distributed Generation (DG), which incorporates renewable energy sources situated closer to end-users. This shift towards DG has paved the way for the emergence of grid-forming converters, which play a pivotal role in enhancing voltage and frequency stability within microgrids (MGs) and isolated applications. This study focuses on assessing the performance of the Zero Harmonic Distortion (ZHD) in both stand-alone and parallel operation modes. The distinctive feature of this converter lies in its inherent ability to generate a sinusoidal voltage source without the need for capacitive filtering components, which can adversely affect cost, efficiency, and size while potentially contributing to resonance problems. This is achieved through a judicious combination of harmonic cancellation within a three-winding transformer and the utilization of Selective Harmonic Elimination Pulse Width Modulation (SHE PWM) dismissing a closed-loop control structure. Simulation and hardware-in-the-loop results presented in this work demonstrate the satisfactory performance of the ZHD grid-forming converter.

Solving dynamic electric circuit with nonlinear hysteretic inductor using harmonics interpolation method

SummaryThe aim of this paper is to present a methodology for solving а dynamic electric circuit with nonlinear hysteretic inductor without the use of hysteresis model or equivalent circuits. A consideration of nonlinear and hysteretic behaviour of the magnetic core under quasistatic conditions is based on applying harmonics interpolation method (HIM) to the measured magnetising field strength waveforms. A dynamic behaviour of the magnetic core is considered through the application of the statistical theory of losses (STL). A considered electric circuit consists of AC voltage source connected in series with shunt resistor, additional linear resistor and inductor, as well as a nonlinear hysteretic inductor. The solution for electric current of the circuit is obtained by solving equation derived from Kirchhoff's laws through a series of successive iterations. Coupling of electric and magnetic part of the circuit is obtained from fundamental laws of electromagnetism. Methodology is validated for four cases of the considered electric circuit — without additional elements, with one additional or both additional elements, for sinusoidal voltage source amplitudes of 2, 4, 6, 8 and 9 V and frequency of 50 Hz. Validation is repeated for frequencies of 100, 200 and 300 Hz while keeping the ratio of the amplitude to frequency constant. Detailed theoretical approach and methodology, comparisons between measured and calculated results, as well as adequate discussion are presented.

Novel Integrated Zeta Inverter for Standalone Applications

In recent years, distributed generation systems based on renewable energy sources have gained increasing prominence. Thus, the DC/AC converters based on power electronics devices have become increasingly important. In this context, this article presents an integrated Zeta inverter for low-power conditions, which operates in continuous conduction mode (CCM), achieving efficiency greater than 95%. The proposed topology is composed of four power switches, two operating at high frequency and two operating at low frequency, i.e., at the output frequency. Compared with the topologies in the literature, these configurations make it a competitive solution from the point of view of efficiency, number of elements, and, consequently, implementation cost. The proposed converter operates as a sinusoidal voltage source for local loads and is supplied by a DC source, such as batteries or a photovoltaic array. A multi-resonant voltage controller was used to guarantee the sinusoidal voltage provided to the non-linear load while dealing with the complex dynamics of the Zeta converter in the CCM. Experimental results from a 324 W prototype show the converter’s implementation feasibility and the high efficiency of the DC/AC conversion.

Comparative study of a high‐speed permanent magnet motor when powered by different methods

AbstractThe authors present the multi‐physical field performances comparative research for a 30 kW, 30,000 r/min high‐speed permanent magnet motor (HSPMM) when the motor is powered by the sinusoidal pulse width modulation (SPWM) voltage inverter and sinusoidal voltage source, respectively. Firstly, electromagnetic performances including torque, voltage and current of the HSPMM with different driving methods are compared and analysed by the finite element method (FEM). Considering the effects of high operation frequency, power losses of the HSPMM with different driving methods under full‐load conditions are calculated and compared with the skin effect and the proximity effect considered for HSPMM winding copper loss estimation. Based on the above analysis, a prototype driven by the SPWM voltage inverter is manufactured, with its electromagnetic and thermal performances tested and verified. In addition, several influencing factors of the HSPMM rotor eddy current loss are studied, with their effects on the HSPMM under different driving methods further analysed and compared as well. A novel equivalent power supply method is proposed to effectively save the calculation time with a negligible error. Finally, in order to further improve the heat dissipation capacity of the HSPMM, a novel cooling method is intensively studied with its influencing factors further analysed. The cooling effect of the novel cooling method and the temperature of the motor components are verified and calculated by the computational fluid dynamics (CFD) method.

Measuring device for systems of technical vibro-diagnosis of power equipment

RELEVANCE. Among the various methods for assessing the technical condition of power equipment, vibration diagnostics occupies an important place. Therefore, improving the quality of hardware for vibration diagnostics is currently extremely important. THE PURPOSE. To develop a vibration sensor with a new principle of operation for systems of technical vibration diagnostics of power equipment, as well as to theoretically substantiate the performance of the proposed sensor. METHODS. When solving the set goal, the main provisions of the theory of vibration diagnostics were applied. RESULTS. A design of the vibration acceleration sensor has been developed, the peculiarity of which is that it is excited by means of constructive coupling capacitors, the first electrode of which is made in the form of a thin-walled metal split cylinder, the role of the second electrodes is performed by the lower row of the winding of each measuring coil, and the function of the inertial element is performed by a screen made in the form of a metal ring fixed on a suspension in the form of a membrane. Based on the electrical equivalent circuit of the sensor, a theoretical substantiation of its operability and efficiency was made. Variants of circuit solutions for the primary and secondary measuring transducers of the measuring device for vibration diagnostics systems have been developed. The primary measuring transducer contains directly a vibration displacement sensor, a sinusoidal voltage source, an input differential measuring amplifier and an analog filter containing a narrow-band filter, a broadband amplifier and a buffer amplifier. The secondary measuring transducer contains a quadrature detector of information signals, an output buffer amplifier and a quadrature reference voltage driver. A block diagram of the hardware solution for the vibration acceleration registration system is also proposed. CONCLUSION. The developed sensor has improved output characteristics and can be used not only for vibration control of power equipment, but also for measuring mechanical vibrations in technical diagnostic systems of various other machines and mechanisms, as well as for tasks of spectral seismic exploration.

Modelling of an optimized BLDC motor energized by a sinusoidal voltage source

Wydawnictwo SIGMA-NOT wydaje czasopisma fachowe informujące swoich czytelników o najnowszych osiągnięciach naukowych i nowoczesnych rozwiązaniach technicznych w Polsce i na świecie, popularyzuje problemy techniczne oraz poszerza wiedzę i kulturę techniczną.

Simulation Analysis of a Single-Phase AC Circuit with a Nonlinear Load

The IEEE 1459 standard states that: “There is a need to quantify correctly the distortions caused by the nonlinear and parametric loads …” The paper undertakes this problem. The article includes an analysis of selected steady-state properties of a single-phase AC circuit containing a series connection of a resistance, an inductance, and a nonlinear element described by a signum function. The circuit is supplied from a sinusoidal voltage source. The mathematical model of this circuit is described using dimensionless variables. Based on the harmonic balance, a description of the circuit for the fundamental harmonic and the circuit for the remaining harmonics was separated. On the basis of the relationship between the current and voltage waveforms, the solution for all harmonics, the harmonic content coefficients, and the elements of the equivalent scheme of the nonlinear load, were estimated symbolically. Based on the circuit equations, a circuit model and measurement systems were developed in Simulink, as well as a program that controls these models in MATLAB and determines the characteristics of the circuit model. The paper presents selected circuit characteristics as a function of load voltage amplitude and circuit resistance. The conclusions drawn from these studies have practical significance.

Analysis and Power Quality Improvement in Hybrid Distributed Generation System with Utilization of Unified Power Quality Conditioner

This paper presents a comprehensive study that includes the sizing and power flow by series and parallel inverters in a distributed generation system (DGs) that integrates the system of hybrid wind photovoltaic with a unified power quality conditioner (UPQC). In addition to supplying active power to the utility grid, the system of hybrid wind photovoltaic functions as a UPQC, compensating reactive power and suppressing the harmonic load currents. Additionally, the load is supplied with harmonic-free, balanced and regulated output voltages. Since PVWind-UPQC is established on a dual compensation scheme, the series inverter works like a sinusoidal current source, while the parallel inverter works like a sinusoidal voltage source. Consequently, a smooth alteration from interconnected operating modes to island operating modes and vice versa can be achieved without load voltage transients. Since PV-Wind-UPQC inverters handle the energy generated through the hybrid wind photovoltaic system and the energy demanded through the load, the converters should be sized cautiously. A detailed study of the flow of power via the PV-Wind-UPQC is imperative to gain a complete understanding of the system operation and the proper design of the converters. Thus, curves that allow the sizing of the power converters according to the power flow via the converters are presented and discussed. Simulation results are presented to assess both steady state and dynamic performances of the grid connected hybrid system of PV-Wind-UPQC. This investigation is verified by simulating and analyzing the results with Matlab/Simulink.

Reduced Plasma Frequency Calculation Based on Particle-in-Cell Simulations

We propose a scheme to calculate the reduced plasma frequency of a cylindrical-shaped electron beam flowing inside of a cylindrical tunnel, based on results obtained from Particle-in-cell (PIC) simulations. In PIC simulations, we modulate the electron beam using two parallel, non-intercepting, closely-spaced grids which are electrically connected together by a single-tone sinusoidal voltage source. The electron energy and the beam current distributions along the length of the tunnel are monitored after the system is operating at steady-state. We build a system matrix describing the beam's dynamics, estimated by fitting a 2x2 matrix that best agrees with the first order differential equations that govern the physics-based system. Results are compared with the theoretical Branch and Mihran model, which is typically used to compute the plasma frequency reduction factor in such systems. Our method shows excellent agreement with the theoretical model, however, it is also general. Our method can be potentially utilized to determine the reduced plasma frequencies of electron beams propagating in differently-shaped beam tunnels, where no theoretical model yet exists, such as the case of a cylindrical or elliptical electron beam propagating inside of a metallic beam tunnel of cylindrical, square, or elliptical cross-section. It can be applied also to electron beams composed of multiple streams.

Current Oscillator Based on Pyragas Model for Electrical Bioimpedance Applications

Current sources play an essential role in tissue excitation used in bioelectrical impedance spectroscopy. Most investigations use Howland current sources that, despite their practicality and simplified implementation, have operating frequency limitations and dependence on the load impedance due to their narrow output impedance, especially at higher frequencies. The objective of this work is to propose a model for a robust current-controlled sinusoidal oscillator. The oscillator is based on fully analog electronics, which enables controlling the oscillation phase and amplitude by using a voltage reference. The mathematical model is based on Pyragas control application to the classical harmonic oscillator. From the modeling process, an oscillator topology was built based on second-generation current carriers and on transconductance amplifiers. A sinusoidal voltage source having a frequency of 1 MHz and an amplitude of 1Vpp was used as a reference signal to drive the oscillator. The oscillator output current synchronized the oscillations’ phase and amplitude using the reference, regardless of their magnitude before the control signal acted in the circuit at t≈13.5μs. SPICE simulations using ideal components have confirmed the successful operation of the proposed oscillator. This type of oscillator can be implemented in SOIC, then allowing oscillation control interface with logic circuits.

Performance Analysis of Grid-Connected Distributed Generation System Integrating a Hybrid Wind-PV Farm Using UPQC

This work presents a distributed generation system (DG) that combines system of a wind turbine (WT) and photovoltaic (PV) using a unified power quality conditioner (UPQC). Along with providing active power (AP) to the utility grid, Wind-PV-UPQC improves PQ indicators, for example, voltage drops/surges, harmonics of grid voltages, and PF. Since Wind-PV-UPQC depends on dual compensation scheme, the parallel converter works as a sinusoidal voltage source, while the series converter works as a sinusoidal current source. In this way, a smooth transition from grid operation to island operation and vice versa can be achieved without load voltage transitions. In addition, in order to overcome the problems through abrupt solar radiation or wind speed variations, a faster power balance is achieved between the wind turbines, the PV array, and the grid, as FFCL pursue the production of the current references of series converter. Consequently, the dynamic reactions of the converter currents and the voltage of dc bus are enhanced. A comprehensive analysis of flow of the AP through the converters is done to ensure a proper understanding of how Wind-PV-UPQC works. Finally, the simulation results are shown to estimate the dynamic and static performance of Wind-PV-UPQC in conjunction with the power distribution system.

Electrical Method for In Vivo Testing of Exhalation Sensors Based on Natural Clinoptilolite

Natural substances with a complex chemical structure can be advantageously used for functional applications. Such functional materials can be found both in the mineral and biological worlds. Owing to the presence of ionic charge carriers (i.e., extra-framework cations) in their crystal lattice, whose mobility is strictly depending on parameters of the external environment (e.g., temperature, humidity, presence of small gaseous polar molecules, etc.), zeolites can be industrially exploited as a novel functional material class with great potentialities in sensors and electric/electronic field. For fast-responding chemical-sensing applications, ionic transport at the zeolite surface is much more useful than bulk-transport, since molecular transport in the channel network takes place by a very slow diffusion mechanism. The environmental dependence of electrical conductivity of common natural zeolites characterized by an aluminous nature (e.g., chabasite, clinoptilolite, etc.) can be conveniently exploited to fabricate impedimetric water-vapor sensors for apnea syndrome monitoring. The high mechanical, thermal, and chemical stability of geomorphic clinoptilolite (the most widely spread natural zeolite type) makes this type of zeolite the most adequate mineral substance to fabricate self-supporting impedimetric water-vapor sensors. In the development of devices for medical monitoring (e.g., apnea-syndrome monitors), it is very important to combine these inexpensive nature-made sensors with a low-weight simplified electronic circuitry that can be easily integrated in wearable items (e.g., garments, wristwatch, etc.). Very low power square-wave voltage sources (micro-Watt voltage sources) show significant voltage drops under only a minimal electric load, and this property of the ac generator can be advantageously exploited for detecting the small impedimetric change observed in clinoptilolite sensors during their exposition to water vapor coming from the human respiratory exhalation. Owing to the ionic conduction mechanism (single-charge carrier) characterizing the zeolite slab surface, the sensor biasing by an ac signal is strictly required. Cheap handheld multimeters frequently include a very low power square-wave (or sinusoidal) voltage source of different frequency (typically 50 Hz or 1 kHz) that is used as a signal injector (signal tracer) to test audio amplifiers (low-frequency amplifies), tone control (equalizer), radios, etc. Such multimeter outputs can be connected in parallel with a true-RMS (Root-Mean-Square) ac voltmeter to detect the response of the clinoptilolite-based impedimetric sensors as voltage drop. The frequency of exhalation during breathing can be measured, and the exhalation behavior can be visualized, too, by using the voltmeter readings. Many handheld multimeters also include a data-logging possibility, which is extremely useful to record the voltage reading over time, thus giving a time-resolved voltage measurement that contains all information concerning the breathing test. Based on the same principle (i.e., voltage drop under minimal resistive load) a devoted electronic circuitry can also be made.

Electrical Power System Harmonics Analysis Using ETAP

Power generation is normally produced at constant frequencies of 50 Hz or 60 Hz and the generators E.M.F can be considered practically sinusoidal. However, when a source of sinusoidal voltage is applied to a nonlinear device or load, the resulting current is not perfectly sinusoidal. Due to non-linear loads, distortions are produced in the sinusoidal waveform so filters are used to minimize these distortions. This paper aims to build a simulation model of a nine-bus ring system to evaluate characteristics of harmonics in different cases of study using electrical transient and analysis program (ETAP), which is considered one of the best tools to study harmonics in the power system, thus, the harmonic distortion is analyzed in ETAP. To generate harmonic distortion in the power network, a general load is modeled as a source of harmonics. A harmonic load flow analysis was carried out in order to determine the impact of harmonic current on a power network, and the THD% of all types of harmonic models on all the buses was checked and the typical IEEE model that has the highest THD% was chosen and compared with the model that contains low THD indices (one of the best models of IEEE manufacturer).

Extreme Multistability and Its Incremental Integral Reconstruction in a Non-Autonomous Memcapacitive Oscillator

Extreme multistability has frequently been reported in autonomous circuits involving memory-circuit elements, since these circuits possess line/plane equilibrium sets. However, this special phenomenon has rarely been discovered in non-autonomous circuits. Luckily, extreme multistability is found in a simple non-autonomous memcapacitive oscillator in this paper. The oscillator only contains a memcapacitor, a linear resistor, a linear inductor, and a sinusoidal voltage source, which are connected in series. The memcapacitive system model is firstly built for further study. The equilibrium points of the memcapacitive system evolve between a no equilibrium point and a line equilibrium set with the change in time. This gives rise to the emergence of extreme multistability, but the forming mechanism is not clear. Thus, the incremental integral method is employed to reconstruct the memcapacitive system. In the newly reconstructed system, the number and stability of the equilibrium points have complex time-varying characteristics due to the presence of fold bifurcation. Furthermore, the forming mechanism of the extreme multistability is further explained. Note that the initial conditions of the original memcapacitive system are mapped onto the controlling parameters of the newly reconstructed system. This makes it possible to achieve precise control of the extreme multistability. Furthermore, an analog circuit is designed for the reconstructed system, and then PSIM circuit simulations are performed to verify the numerical results.

Experimental Study of Transient Processes in a Coil Capacitor when Connecting to a Source of Sinusoidal Voltage

Experimental Study of Transient Processes in a Coil Capacitor when Connecting to a Source of Sinusoidal Voltage

Transient Current Density in a Pair of Long Parallel Conductors

Two infinitely long parallel conductors of arbitrary cross section connected to a voltage source form a loop. If the source voltage depends on time, then due to induction there is no constant current density in the loop conductors. It is only recently that a method has been published for accurately calculating current density in a group of long parallel conductors. The method has thus far been applied to the calculation of steady-state current density in a loop connected to a sinusoidal voltage source. In the present article, the method is used for an accurate calculation of transient current using transient current density. The transient current is analysed when connecting and short-circuiting the sources of sinusoidal, constant and sawtooth voltages. For circular cross section conductors, the dependences of maximum current density, maximum current and the time of achieving steady state on the source frequency, the distance of the conductors and their resistivity when connecting the source of sinusoidal voltage are examined.

Recurrence analysis and synchronization of two resistively coupled Duffing-type oscillators

In this work, we study the complex dynamics and synchronization of two coupled Duffing-type circuits within the framework of recurrence quantification analysis (RQA). For the case of a Duffing oscillator driven by a sinusoidal voltage source, the behavior of various RQA parameters has been shown to reveal complex chaotic transitions taking place in its oscillatory behavior as the amplitude of forcing term is varied. The problem of synchronization of two identical Duffing oscillators coupled together resistively is further investigated using RQA. The simulated recurrence plot (RP) and plot for the $$\tau $$ -recurrence/recurrence probability, $$p(\tau )$$ , have been used extensively over different control parameter regime to understand the dynamical complexity including chaos synchronization for both one-way and two-way coupled Duffing-type oscillators. The critical parameter beyond which chaos synchronization occurs in such systems is determined.

PV integrated universal active power filter for power quality enhancement and effective power management

This paper presents a new control scheme for solar photo-voltaic (PV) integrated universal active power filter (PV-UAPF). Here, the instantaneous power balance theory (IPBT) is proposed to extract the reference signals for shunt active filter (ShAPF) and series active power filters (SeAPF). Thereby, ShAPF will act as a pure sinusoidal voltage source and SeAPF will act as a pure sinusoidal current source. In the IPBT control scheme, the frequency locked loop (FLL) based modified reduced order generalized integrator (MROGI) is proposed to extract positive and negative sequence components (PNSC) and phase angle during adverse grid conditions. Also, the PV integration at the DC link will reduce demand on the supply system thereby reduces the burden on the utility grid. Hence, the proposed system combines both the benefits of clean energy generation along with power quality improvement. To validate the performance of the proposed system, simulation is developed in MATLAB, and results are verified. Also, the system performance is then verified in the hardware setup under various disturbances such as voltage sag/swell, load distortion, and change in PV power.

Led lamp driver modelling

Currently, there is an increase in the use and production of energy-saving lamps of various types – fluorescent and LED ones. However, it has been found that the use of technologies that have proven themselves in the creation of luminescent sources for LED light sources is ineffective. The use of traditional secondary optics for LED luminaires makes it difficult to create an effective heat sink from LEDs, while the durability of LEDs significantly depends on the heat sink. Another important issue when designing LED luminaires is choosing the right driver. The power consumption of LEDs from the primary network depends on the efficiency of the driver used. The choice of the type of driver also determines the amount of heat that should be removed from its elements. A significant factor influencing the choice of a driver is also the possibility of its operation in conjunction with a voltage regulator – a dimmer, in order to control the illumination. It is also necessary to take into account the IEC recommendations that require manufacturers to use active power factor correctors for devices with switching power supplies and / or electronic ballast with a power of 20 watts or more. Therefore, there is a task of developing a highly efficient driver for use in LED luminaires. In the process of reviewing modern drivers, a driver based on the LT3799 microcircuit from Linear Technology was selected for further research, which is distinguished by high efficiency, working with a large number of produced LEDs, has a built-in active power factor corrector, and allows the use of dimmers. The inclusion of the driver chip recommended by the manufacturer was applied, with the addition of noise suppressing components. The galvanic isolation of the power supply circuits of the LED matrix is provided. Next, the analysis of the characteristics of the selected circuit design solution is carried out using computer simulation. LTSpice EDA was chosen as a modeling tool, which is distinguished by its versatility, ease of use and high reliability of results in comparison with similar software products. The modes of operation are analyzed depending on the requirements for the pulsation of the emitting matrix, the operation of the power factor corrector, and the suppression of interference into the industrial network from the operation of the source is estimated. Various options for the development of the circuitry implementation of the driver based on the LT3799 microcircuit and the operating modes of the most heavily loaded elements are analyzed: an inductor, a key transistor, a damper circuit, a diode in the power supply circuit of an LED matrix. Optimal values of circuit components and parameters of winding elements were selected. It is shown that due to the operation of the power factor corrector, the shape of the current consumption from a sinusoidal voltage source is also almost sinusoidal, which leads to an almost active nature of the load. The modes of operation of the LED matrix for the nominal supply voltage and for the reduced one (with a dimmer) are considered. Methods of implementation of a soft start of an LED matrix are described. Based on the results of the work, conclusions are drawn that summarize the expediency of using the developed driver for an LED device based on the LT3799 microcircuit.

Optical diagnostics of the characteristics of a square unipolar nanosecond pulse-driven atmospheric pressure helium plasma jet

Compared with the traditional sinusoidal voltage source, a short rising nanosecond voltage source can generate a high electron current for a short rising time. This paper investigates how the nanopulse parameters such as the voltage amplitude, pulse duration, and repetition frequency affect the radical generation and the plasma bullet propagation in an atmospheric pressure helium plasma jet. An intensified charge-coupled device was used to observe the bullet propagation in the nanosecond gate mode. The plasma bullet’s propagation speed is mainly affected by the applied voltage and externally biased electrodes rather than the pulse duration or the driving frequency. In contrast, optical emission spectroscopy diagnostics estimate that the radical density inside the atmospheric pressure plasma jet mainly increases with the repetition frequency. At the same time, the population of high-energy electrons can be controlled with the unipolar voltage amplitude. Thus, unipolar nanosecond pulses make it possible to control the emitting charges and the generated radicals independently.