Single Electron Transfer-nitroxide Radical Coupling Research Articles

Tadpole-shaped polymers based on UV-induced strain promoted azide-alkyne cycloaddition reaction

In the present study, we synthesized well-defined tadpole-shaped polystyrene (PS) via the combination of atom transfer radical polymerization (ATRP) and UV-induced strain promoted azide-alkyne cycloaddtion (SPAAC) reaction. A di-bromo ATRP initiator (Br-ini-Br) containing cyclopropenone-masked dibenzocyclooctyne group was used to prepare the linear PS with a cyclopropenone-masked dibenzocyclooctyne in the middle of the chain and bromo groups at both ends (Br-PS-Br). Then we used the single electron transfer-nitroxide radical coupling (SET-NRC) reaction to transfer the bromo end groups to azide groups (N3-PS-N3). After UV irradiation, the dibenzocyclooctyne group was quantitatively released, and intramolecularly reacted with alternative azide end group to produce the tadpole-shaped PS based on SPAAC reaction.

A Tandem Controlled Radical Polymerization Technique for the Synthesis of Poly(4‐vinylpyridine) Block Copolymers: Successive ATRP, SET‐NRC, and NMP

Poly(methyl methacrylate)‐block‐poly(4‐vinylpyridine), polystyrene‐block‐poly(4‐vinyl pyridine), and poly(ethylene glycol)‐block‐poly(4‐vinylpyridine) block copolymers are synthesized by successive atom transfer radical polymerization (ATRP), single‐electron‐transfer nitroxide‐radical‐coupling (SET‐NRC) and nitroxide‐mediated polymerization (NMP). This paper demonstrates that this new approach offers an efficient method for the preparation of 4‐vinylpyridine‐containing copolymers. image

Methods for Synthesizing the Macromolecular Constituents of Smart Nanosized Carriers for Controlled Drug Delivery

Smart multifunctional polymeric nanocarriers able to respond to physicochemical changes in their environment or to external stimuli represent a new paradigm in the field of pharmaceutical formulations for controlled drug delivery. The introductory part of the present review deals with this new concept and presents the main advantages resulting from the use of such nanovehicles instead of conventional, much larger drug delivery systems. The access to drug nanocarriers based on smart supramolecular polymeric materials is primarily limited by the available polymerization methods capable to produce polymers with low polydispersity index, as well as much more complex macromolecular architectures with strictly controlled chemical composition, such as block copolymers and star or graft polymers or copolymers. This article reviews the state-of-the art in controlled/"living" free radical polymerization techniques as well as ring opening polymerization methods. Nitroxide mediated free radical polymerization (NMP), atom transfer radical polymerization (ATRP), reversible addition-fragmentation chain-transfer polymerization (RAFT), single electron transfer-living radical polymerization (SET-LRP), single electron transfer-nitroxide radical coupling reaction (SET-NRC), cationic ring opening polymerization (CROP), anionic ring opening polymerization (AROP), and metal catalyzed ring opening polymerization are described, highlighting their mechanistic details and their synthetic potential as well as their limitations. The final part of the article is dedicated to a special type of unimolecular, monodisperse nanocarriers - the dendrimers. Both divergent and convergent approaches to dendrimer synthesis are described along with the therapeutic applications taking advantage of the unique branched tree-like globular structure of dendrimers to treat cancer.

ATNRC/SET-NRC synthesis of graphene/polyisobutylene nanocomposites

Two polyisobutylene-grafted graphene nanocomposites were prepared by CuBr-catalyzed atom transfer nitroxide radical coupling (ATNRC) and Cu-catalyzed single electron transfer-nitroxide radical coupling (SET-NRC) chemistry under mild conditions, respective

One-pot synthesis of chitosan-g-(PEO-PLLA-PEO) via “click” chemistry and “SET-NRC” reaction

For the development of biocompatible and degradable biomaterials, a kind of well-defined graft copolymer consisting of chitosan back-bone and amphiphilic PEO-PLLA-PEO branch chains was synthesized by Cu(0) catalyzed one-pot strategy combining “click” chemistry and single electron transfer-nitroxide radical coupling (SET-NRC) reaction. First, the precursors of 6-azide-N-phthaloyl-chitosan, TEMPO-PEO-alkyne and mPEO-PLLA-Br were designed and produced. Then, the one-pot coupling reactions between these precursors were performed in the presence of nanosized Cu and PMDETA. The efficiencies of the coupling reactions were greater than 90% determined by the FTIR and ESR spectra. The structure of graft copolymer with 43% of the grafting ratio was confirmed by the spectral analysis. This work provided a route to prepare chitosan graft copolymer.

Synthesis and characterization of amphiphilic heterograft copolymers with PAA and PS side chains via “Grafting from” approach

AbstractThe amphiphilic heterograft copolymers poly(methyl methacrylate‐co‐2‐(2‐bromoisobutyryloxy)ethyl methacrylate)‐graft‐(poly(acrylic acid)/polystyrene) (P(MMA‐co‐BIEM)‐g‐(PAA/PS)) were synthesized successfully by the combination of single electron transfer‐living radical polymerization (SET‐LRP), single electron transfer‐nitroxide radical coupling (SET‐NRC), atom transfer radical polymerization (ATRP), and nitroxide‐mediated polymerization (NMP) via the “grafting from” approach. First, the linear polymer backbones poly(methyl methacrylate‐co‐2‐(2‐bromoisobutyryloxy)ethyl methacrylate) (P(MMA‐co‐BIEM)) were prepared by ATRP of methyl methacrylate (MMA) and 2‐hydroxyethyl methacrylate (HEMA) and subsequent esterification of the hydroxyl groups of the HEMA units with 2‐bromoisobutyryl bromide. Then the graft copolymers poly(methyl methacrylate‐co‐2‐(2‐bromoisobutyryloxy)ethyl methacrylate)‐graft‐poly(t‐butyl acrylate) (P(MMA‐co‐BIEM)‐g‐PtBA) were prepared by SET‐LRP of t‐butyl acrylate (tBA) at room temperature in the presence of 2,2,6,6‐tetramethylpiperidin‐1‐yloxyl (TEMPO), where the capping efficiency of TEMPO was so high that nearly every TEMPO trapped one polymer radicals formed by SET. Finally, the formed alkoxyamines via SET‐NRC in the main chain were used to initiate NMP of styrene and following selectively cleavage of t‐butyl esters of the PtBA side chains afforded the amphiphilic heterograft copolymers poly(methyl methacrylate‐co‐2‐(2‐bromoisobutyryloxy)ethyl methacrylate)‐graft‐(poly(t‐butyl acrylate)/polystyrene) (P(MMA‐co–BIEM)‐g‐(PtBA/PS)). The self‐assembly behaviors of the amphiphilic heterograft copolymers P(MMA‐co–BIEM)‐g‐(PAA/PS) in aqueous solution were investigated by AFM and DLS, and the results demonstrated that the morphologies of the formed micelles were dependent on the grafting density. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011

Synthesis of H‐shaped A3BA3 copolymer by methyl‐2‐nitrosopropane induced single electron transfer nitroxide radical coupling

AbstractAmphiphilic H‐shaped [poly(ethylene oxide)]3‐polystyrene‐[poly(ethylene oxide)]3(PEO3‐PS‐PEO3) copolymer was synthesized by 2‐methyl‐2‐nitrosopropane (MNP) induced single electron transfer nitroxide radical coupling (SETNRC) using PEO3‐(PS‐Br) as a single precursor. First, the A3B star‐shaped precursor PEO3‐(PS‐Br) was synthesized by atom transfer radical polymerization (ATRP) using three‐arm star‐shaped PEO3‐Br as macro‐initiator. Then, in the presence of Cu(I)Br/Me6TREN, the bromide group at PS end was sequentially transferred into carbon‐centered radical by single electron transfer and then nitroxide radical by reacting with MNP in mixed solvents of dimethyl sulfoxide (DMSO)/tetrahydrofuran (THF), and in situ generated nitroxide radical could again capture another carbon‐centered radical by fast SETNRC to form target PEO3‐PS‐PEO3 copolymer. The MNP induced SETNRC could reach to a high efficiency of 90% within 60 min. After the product PEO3‐PS‐PEO3 was cleaved by ascorbic acid, the SEC results showed that there was about 30% fraction of product formed by single electron transfer radical coupling (SETRC) between carbon‐centered radicals. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011

Copper(0)‐catalyzed one‐pot synthesis of ABC triblock copolymers via the combination of single electron transfer nitroxide radical coupling reaction and “click” chemistry

AbstractThe synthesis of ABC triblock copolymers were accomplished by Cu(0)‐catalyzed one‐pot strategy combining single electron transfer‐nitroxide radical coupling (SET‐NRC) reaction with “click” chemistry. First, the precursors α,ω‐heterofunctionalized poly(ethylene oxide) (PEO) with a 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) group and an alkyne group, polystyrene (PS), and poly(tert‐butyl acrylate) (PtBA) with bromine or azide end group were designed and synthesized, respectively. Then, the one‐pot coupling reactions between these precursors were carried out in the system of Cu(0)/Me6TREN: The SET‐NRC reaction between bromine group and nitroxide radical group, subsequently click coupling between azide and alkyne group. It was noticeable that Cu(I) generated from Cu(0) by SET mechanism was utilized to catalyze click chemistry. To estimate the effect of Cu(0) on the one‐pot reaction, a comparative analysis was performed in presence of different Cu(0) species. The result showed that Cu(0) with more active surface area could accelerate the one‐pot reaction significantly. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011

Synthesis of macrocyclic molecular brushes with amphiphilic block copolymers as side chains

AbstractMacrocyclic molecular brushes c‐PHEMA‐g‐(PS‐b‐PEO) consisting of macrocyclic poly(2‐hydroxylethyl methacrylate) (c‐PHEMA) as backbone and polystyrene‐b‐poly(ethylene oxide) (PS‐b‐PEO) amphiphilic block copolymers as side chains were synthesized by the combination of atom transfer radical polymerization (ATRP), click chemistry, and single‐electron transfer nitroxide radical coupling (SET‐NRC). First, a linear α‐alkyne‐ω‐azido heterodifunctional PHEMA (l‐HCC‐PHEMA‐N3) was prepared by ATRP of HEMA using 3‐(trimethylsilyl)propargyl 2‐bromoisobutyrate as initiator, and then chlorine end groups were transformed to N3 group by nucleophilic substitution reaction in DMF in the presence of an excess of NaN3. The 3‐trimethylsilyl groups could be removed in the presence of tetrabutylammonium fluoride, and the product was cyclized by “click” chemistry in high dilution conditions. The hydroxyl groups on c‐PHEMA were transferred into bromine groups by esterification with 2‐bromoisobutyryl bromide and then initiate the ATRP of styrene. The formed macrocyclic molecular brushes c‐PHEMA‐g‐PS were coupled with the TEMPO‐PEO to afford the target macrocyclic molecular brushes c‐PHEMA‐g‐(PS‐b‐PEO) by SET‐NRC, and the efficiency is as high as 80∼85%. All of the intermediates and final product were characterized with 1H NMR, Fourier transform infrared (FTIR), and gel permeation chromatography in details © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011

Synthesis of starlike PtBA‐g‐PEO amphiphilic graft copolymer via highly efficient Cu‐catalyzed SET‐NRC reaction at ambient temperature

AbstractTwo new amphiphilic star graft copolymers bearing hydrophobic poly(tert‐butyl acrylate) backbone and hydrophilic poly(ethylene oxide) (PEO) side chains with different molecular weights were synthesized by sequential reversible addition fragmentation chain transfer (RAFT) polymerization and single electron transfer‐nitroxide radical coupling (SET‐NRC) reaction under mild conditions. RAFT homopolymerization of tert‐butyl 2‐((2‐bromopropanoyloxy)methyl)acrylate was mediated by a four‐armed chain transfer agent in a controlled way to afford a well‐defined starlike backbone with a narrow molecular weight distribution (Mw/Mn = 1.26). The target poly(tert‐butyl acrylate)‐g‐PEO (PtBA‐g‐PEO) star graft copolymers were synthesized by SET‐NRC reaction between Br‐containing PtBA‐based starlike backbone and PEO end functionalized with 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) group using copper/N,N,N′,N′,N″‐pentamethyldiethylenetriamine as catalytic system at ambient temperature via grafting‐onto strategy. The critical micelle concentration values of the obtained amphiphilic star graft copolymers in aqueous media and brine were determined by fluorescence probe technique using pyrene as probe. Diverse micellar morphologies were formed by varying the content of hydrophilic PEO segment as well as the initial concentration of stock solution. In addition, poly(acrylic acid)‐g‐PEO double hydrophilic star graft copolymers were obtained by selective acidic hydrolysis of hydrophobic PtBA starlike backbone without affecting PEO side chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010

Star‐like PAA‐g‐PPO well‐defined amphiphilic graft copolymer synthesized by ATNRC and SET‐NRC reaction

AbstractA series of well‐defined amphiphilic star graft copolymers consisting of hydrophilic poly(acrylic acid) backbone and hydrophobic poly(propylene oxide) side chains were synthesized by the sequential reversible addition‐fragmentation chain transfer (RAFT) polymerization and atom transfer nitroxide radical coupling (ATNRC) or single electron transfer‐nitroxide radical coupling (SET‐NRC) reaction followed by the selective hydrolysis of poly(tert‐butyl acrylate) backbone. A Br‐containing acrylate monomer, tert‐butyl 2‐((2‐bromopropanoyloxy)methyl)acrylate, was first homopolymerized via RAFT polymerization using a new star‐like chain‐transfer agent with four arms in a controlled way to give a well‐defined star‐like backbone with a narrow molecular weight distribution (Mw/Mn = 1.23). The grafting‐onto strategy was used to synthesize the well‐defined PtBA‐g‐PPO star graft copolymers with narrow molecular weight distributions (Mw/Mn = 1.14–1.25) via ATNRC or SET‐NRC reaction between the Br‐containing PtBA‐based star‐like backbone and poly(propylene oxide) with 2,2,6,6‐tetramethylpiperidine‐1‐oxyl end group using CuBr/PMDETA or Cu/PMDETA as catalytic system. PAA‐g‐PPO amphiphilic star graft copolymers were obtained by the selective acidic hydrolysis of star‐like PtBA‐based backbone in acidic environment without affecting the side chains. The critical micelle concentrations in aqueous media and brine were determined by the fluorescence probe technique. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2084–2097, 2010

Ultrafast and Reversible Multiblock Formation by the SET-Nitroxide Radical Coupling Reaction

The single electron transfer-nitroxide radical coupling (SET-NRC) reaction has been used to produce multiblock polymers with high molecular weights in under 3 min at 50°C by coupling a difunctional telechelic polystyrene (Br-PSTY-Br) with a dinitroxide. The well known combination of dimethyl sulfoxide as solvent and Me6TREN as ligand facilitated the in situ disproportionation of CuIBr to the highly active nascent Cu0 species. This SET reaction allowed polymeric radicals to be rapidly formed from their corresponding halide end-groups. Trapping of these carbon-centred radicals at close to diffusion controlled rates by dinitroxides resulted in high-molecular-weight multiblock polymers. Our results showed that the disproportionation of CuI was critical in obtaining these ultrafast reactions, and confirmed that activation was primarily through Cu0. We took advantage of the reversibility of the NRC reaction at elevated temperatures to decouple the multiblock back to the original PSTY building block through capping the chain-ends with mono-functional nitroxides. These alkoxyamine end-groups were further exchanged with an alkyne mono-functional nitroxide (TEMPO–≡) and ‘clicked’ by a CuI-catalyzed azide/alkyne cycloaddition (CuAAC) reaction with N3–PSTY–N3 to reform the multiblocks. This final ‘click’ reaction, even after the consecutive decoupling and nitroxide-exchange reactions, still produced high-molecular-weight multiblocks efficiently. These SET-NRC reactions would have ideal applications in re-usable plastics and possibly as self-healing materials.

Single-Electron-Transfer Nitroxide-Radical-Coupling Reaction at Ambient Temperature: Application in the Synthesis of Block Copolymers

Single-Electron-Transfer Nitroxide-Radical-Coupling Reaction at Ambient Temperature: Application in the Synthesis of Block Copolymers