Single-wavelength Anomalous Dispersion Experiment Research Articles

Fast, automated, continuous energy scans for experimental phasing at the BioMAX beamline.

In X-ray macromolecular crystallography (MX), single-wavelength anomalous dispersion (SAD) and multi-wavelength anomalous dispersion (MAD) techniques are commonly used for obtaining experimental phases. For an MX synchrotron beamline to support SAD and MAD techniques it is a prerequisite to have a reliable, fast and well automated energy scan routine. This work reports on a continuous energy scan procedure newly implemented at the BioMAX MX beamline at MAX IV Laboratory. The continuous energy scan is fully automated, capable of measuring accurate fluorescence counts over the absorption edge of interest while minimizing the sample exposure to X-rays, and is about a factor of five faster compared with a conventional step scan previously operational at BioMAX. The implementation of the continuous energy scan facilitates the prompt access to the anomalous scattering data, required for the SAD and MAD experiments.

The signal-to-noise ratio in SAD experiments

ABSTRACTDe novo single-wavelength anomalous dispersion (SAD) determination of macromolecular structures requires accurate measurement of anomalous signal from naturally occurring (S, P, Ca, etc.) or incorporated (Se, Hg, etc.) anomalous scatterers. The quality and the level of the anomalous signal in SAD datasets can be assessed using, as an indicator, the average anomalous signal-to-noise level ⟨|ΔIanom|/σ(ΔI)⟩ based on intensities or ⟨|ΔFanom|/σ(ΔF)⟩ based on amplitudes. The value for the average anomalous signal-to-noise for a successful SAD experiment is a matter of debate given its high variability from one SAD experiment to another. We present a mathematical model relating the ⟨|ΔIanom|/σ(ΔI)⟩ to the overall final ⟨I/σ(I)⟩, necessary for successful SAD phasing. By statistical analysis of the data from 115 successful native SAD experiments, as available in the PDB, we show that the experimental values of ⟨|ΔIanom|/σ(ΔI)⟩ follow a Gamma distribution with an average value of 1.2 ± 0.3. This mathematical model allows a-priori prediction of the overall ⟨I/σ(I)⟩, necessary for successful SAD phasing given the description of the sample expressed. The results reported here are of general applicability to any phasing experiment involving the measurement of anomalous signal from any anomalous scatterer or X-ray source, including X-FEL data.

Purification and crystallographic studies of a putative carbohydrate-binding module from the Ruminococcus flavefaciens FD-1 endoglucanase Cel5A.

Ruminant herbivores meet their carbon and energy requirements from a symbiotic relationship with cellulosome-producing anaerobic bacteria that efficiently degrade plant cell-wall polysaccharides. The assembly of carbohydrate-active enzymes (CAZymes) into cellulosomes enhances protein stability and enzyme synergistic interactions. Cellulosomes comprise diverse CAZymes displaying a modular architecture in which a catalytic domain is connected, via linker sequences, to one or more noncatalytic carbohydrate-binding modules (CBMs). CBMs direct the appended catalytic modules to their target substrates, thus facilitating catalysis. The genome of the ruminal cellulolytic bacterium Ruminococcus flavefaciens strain FD-1 contains over 200 modular proteins containing the cellulosomal signature dockerin module. One of these is an endoglucanase Cel5A comprising two family 5 glycoside hydrolase catalytic modules (GH5) flanking an unclassified CBM (termed CBM-Rf2) and a C-terminal dockerin. This novel CBM-Rf2 has been purified and crystallized, and data from cacodylate-derivative crystals were processed to 1.02 and 1.29 Å resolution. The crystals belonged to the orthorhombic space group P212121. The CBM-Rf2 structure was solved by a single-wavelength anomalous dispersion experiment at the As edge.

Crystallization and preliminary crystallographic studies of a novel noncatalytic carbohydrate-binding module from the Ruminococcus flavefaciens cellulosome.

Microbial degradation of the plant cell wall is a fundamental biological process with considerable industrial importance. Hydrolysis of recalcitrant polysaccharides is orchestrated by a large repertoire of carbohydrate-active enzymes that display a modular architecture in which a catalytic domain is connected via linker sequences to one or more noncatalytic carbohydrate-binding modules (CBMs). CBMs direct the appended catalytic modules to their target substrates, thus potentiating catalysis. The genome of the most abundant ruminal cellulolytic bacterium, Ruminococcus flavefaciens strain FD-1, provides an opportunity to discover novel cellulosomal proteins involved in plant cell-wall deconstruction. It encodes a modular protein comprising a glycoside hydrolase family 9 catalytic module (GH9) linked to two unclassified tandemly repeated CBMs (termed CBM-Rf6A and CBM-Rf6B) and a C-terminal dockerin. The novel CBM-Rf6A from this protein has been crystallized and data were processed for the native and a selenomethionine derivative to 1.75 and 1.5 Å resolution, respectively. The crystals belonged to orthorhombic and cubic space groups, respectively. The structure was solved by a single-wavelength anomalous dispersion experiment using the CCP4 program suite and SHELXC/D/E.

SAD experiment using the wavelength of 2.7 Å or longer

Single-wavelength anomalous dispersion (SAD) experiment with light atoms as anomalous scatterers has been carried out using longer wavelengths up to 2.3 Å. We have been developing a synchrotron beamline dedicated to the SAD experiments where wavelengths longer than 2.7 Å are available to enhance weak anomalous signals. Larger background noise due to the longer wavelength, which is one of the major problems in the experiment, is reduced by introducing a standing helium chamber surrounding both the whole diffractometer and the X-ray detector. The system allows to perform experiments with normal and long waveldngths under the same environment. Helium cold stream is fed into the chamber at the sample position and reused after removing contaminants to keep the temperature of the stream at 30 K or below economically. Capillary-top-mount method [1] was improved to further reduce the background noise and to accommodate with smaller or needle-shape crystals. Several results on de-novo structural solutions with sulfur-SAD phasing will be reported in addition to the current performance of the beamline and its future plan.

Overproduction, purification, crystallization and preliminary X-ray characterization of the family 46 carbohydrate-binding module (CBM46) of endo-β-1,4-glucanase B (CelB) from Bacillus halodurans.

Plant cell-wall polysaccharides offer an abundant energy source utilized by many microorganisms, thus playing a central role in carbon recycling. Aerobic microorganisms secrete carbohydrate-active enzymes (CAZymes) that catabolize this composite structure, comprising cellulose, hemicellulose and lignin, into simple compounds such as glucose. Carbohydrate-binding modules (CBMs) enhance the efficacy of associated CAZYmes. They are organized into families based on primary-sequence homology. CBM family 46 contains more than 40 different members, but has yet to be fully characterized. Here, a recombinant derivative of the C-terminal family 46 CBM module (BhCBM46) of Bacillus halodurans endo-β-1,4-glucanase B (CelB) was overexpressed in Escherichia coli and purified by immobilized metal-ion affinity chromatography. Preliminary structural characterization was carried out on BhCBM46 crystallized in different conditions. The crystals of BhCBM46 belonged to the tetragonal space group I4₁22. Data were collected for the native form and a selenomethionine derivative to 2.46 and 2.3 Å resolution, respectively. The BhCBM46 structure was determined by a single-wavelength anomalous dispersion experiment using AutoSol from the PHENIX suite.

Crystallization and preliminary X-ray diffraction analysis of the N-terminal domain of Mrs2, a magnesium ion transporter from yeast inner mitochondrial membrane

Mrs2 transporters are distantly related to the major bacterial Mg(2+) transporter CorA and to Alr1, which is found in the plasma membranes of lower eukaryotes. Common features of all Mrs2 proteins are the presence of an N-terminal soluble domain followed by two adjacent transmembrane helices (TM1 and TM2) near the C-terminus and of the highly conserved F/Y-G-M-N sequence motif at the end of TM1. The inner mitochondrial domain of the Mrs2 from Saccharomyces cerevisae was overexpressed, purified and crystallized in two different crystal forms corresponding to an orthorhombic and a hexagonal space group. The crystals diffracted X-rays to 1.83 and 4.16 A resolution, respectively. Matthews volume calculations suggested the presence of one molecule per asymmetric unit in the orthorhombic crystal form and of five or six molecules per asymmetric unit in the hexagonal crystal form. The phase problem was solved for the orthorhombic form by a single-wavelength anomalous dispersion experiment exploiting the sulfur anomalous signal.

Cloning, expression, purification, crystallization and preliminary crystallographic studies of UgdG, an UDP-glucose dehydrogenase from Sphingomonas elodea ATCC 31461.

Gellan gum, a commercial gelling agent produced by Sphingomonas elodea ATCC 31461, is a high-value microbial exopolysaccharide. UDP-glucose dehydrogenase (UGD; EC 1.1.1.22) is responsible for the NAD-dependent twofold oxidation of UDP-glucose to UDP-glucuronic acid, one of the key components for gellan biosynthesis. S. elodea ATCC 31461 UGD, termed UgdG, was cloned, expressed, purified and crystallized in native and SeMet-derivatized forms in hexagonal and tetragonal space groups, respectively; the crystals diffracted X-rays to 2.40 and 3.40 A resolution, respectively. Experimental phases were obtained for the tetragonal SeMet-derivatized crystal form by a single-wavelength anomalous dispersion experiment. This structure was successfully used as a molecular-replacement probe for the hexagonal crystal form of the native protein.

A comparison of SAD and two-wavelength MAD phasing for radiation-damaged Se-MET crystals

Although a case has been made that single-wavelength anomalous dispersion (SAD) is the optimal strategy for data collection in the presence of radiation damage, two-wavelength MAD experiments at the inflection and a high-energy remote point of the absorption edge have been shown to be a potentially successful alternative method. In order to further investigate the performance of both data collection strategies, a comparison of SAD and MAD phasing was carried out for increasingly damaged data sets from three different seleno-methionine protein samples collected under similar experimental conditions. In all but one example the MAD phases appeared to be less affected than SAD phases with increasing exposure to X-rays, and had a better overall success rate, indicating that this method should be given serious consideration when dealing with radiation-sensitive crystals. Simultaneous data collection in wedges at all wavelengths seems to be a very important factor in the success of MAD experiments; the decreased absorbed dose resulting from eschewing data collection at the maximum f '' wavelength may play a less important role. Specific radiation damage to the selenium atoms is found to be a minor effect compared with the effect on the anomalous dispersion signal, although potentially large enough to be a useful contribution to phasing in both SAD and MAD experiments.

Overcoming the false-minima problem in direct methods: structure determination of the packaging enzyme P4 from bacteriophage phi13.

The problems encountered during the phasing and structure determination of the packaging enzyme P4 from bacteriophage phi13 using the anomalous signal from selenium in a single-wavelength anomalous dispersion experiment (SAD) are described. The oligomeric state of P4 in the virus is a hexamer (with sixfold rotational symmetry) and it crystallizes in space group C2, with four hexamers in the crystallographic asymmetric unit. Current state-of-the-art ab initio phasing software yielded solutions consisting of 96 atoms arranged as sixfold symmetric clusters of Se atoms. However, although these solutions showed high correlation coefficients indicative that the substructure had been solved, the resulting phases produced uninterpretable electron-density maps. Only after further analysis were correct solutions found (also of 96 atoms), leading to the eventual identification of the positions of 120 Se atoms. Here, it is demonstrated how the difficulties in finding a correct phase solution arise from an intricate false-minima problem.

Structural Basis for Autoinhibition and Mutational Activation of Eukaryotic Initiation Factor 2α Protein Kinase GCN2*[boxs

The GCN2 protein kinase coordinates protein synthesis with levels of amino acid stores by phosphorylating eukaryotic translation initiation factor 2. The autoinhibited form of GCN2 is activated in cells starved of amino acids by binding of uncharged tRNA to a histidyl-tRNA synthetase-like domain. Replacement of Arg-794 with Gly in the PK domain (R794G) activates GCN2 independently of tRNA binding. Crystal structures of the GCN2 protein kinase domain have been determined for wild-type and R794G mutant forms in the apo state and bound to ATP/AMPPNP. These structures reveal that GCN2 autoinhibition results from stabilization of a closed conformation that restricts ATP binding. The R794G mutant shows increased flexibility in the hinge region connecting the N- and C-lobes, resulting from loss of multiple interactions involving Arg794. This conformational change is associated with intradomain movement that enhances ATP binding and hydrolysis. We propose that intramolecular interactions following tRNA binding remodel the hinge region in a manner similar to the mechanism of enzyme activation elicited by the R794G mutation.