Single-walled Nanotubes Research Articles

Dynamic magnetic properties and magnetocaloric effect of a nanotube encapsulated with X36

Abstract Using Monte Carlo simulation, the dynamic magnetic properties and magnetocaloric effect of a mixed-spin (3/2, 2) single-walled nanotube encapsulated with X36 was studied, where X denotes the magnetic atom. The effects of intrinsic parameters on dynamic order parameters, magnetic susceptibility, internal energy, and specific heat were considered. The phase diagrams were obtained. The results indicate that the critical temperature can be increased by decreasing the absolute values of the anisotropies (D a , D b ), increasing the exchange couplings (|J ab |, J bb ), and decreasing the amplitude h 0 and the period τ of the external magnetic field. And under the influence of these parameters, the magnetocaloric effect is generated.

New Polymorphic Varieties of Boron Nitride with Diamond-Like TA-Type Phases

In this work, a theoretical study of new polymorphic varieties of boron nitride, which have diamond-like structures with boron and nitrogen atoms in equivalent structural positions, was carried out. The model construction of new phases of boron nitride was performed in the process of crosslinking precursor nanostructures. Single-walled boron nitride nanotubes with chirality indices (3;0), (4;0), and (6;0) were chosen as precursors for the model construction of diamond-like phases. Using the density functional theory method in the generalized gradient approximation, the possibility of stable existence of three new structural varieties of boron nitride with a diamond-like structure was established: BN-TA4, BN-TA5, BN-TA6. The structure of the BN-TA7 diamond-like phase turned out to be unstable and, in the process of geometric optimization, was transformed into the initial structure, a boron nitride nanotube (6;0). As a structural characteristic, the bulk density of the new polymorphs was determined, which is in the range from 2.613 to 3.0836 g/cm3. The sublimation energy of new polymorphic varieties ranges from 17.16 to 17.63 eV/(BN). The value of the band gap near the Fermi energy varies from 5.37 to 5.74 eV.

Functionalization of single-walled aluminum nitride nanotube with amino acids using the first principle's study

In this study, we investigate the functionalization of aluminum nitride nanotube (AlNNT) with amino acids (Phenylalanine, Arginine, and Glutamine) using first-principle density functional theory (DFT) calculations. DFT methods were applied to model the interactions between amino acids and AlNNT, exploring the structural and electronic features of the functionalized systems, and examining various aspects of the structures, including their geometry and electronic properties, such as bond lengths, bond angles, total energy, formation energy, band structure, chemical potential, density of states (DOS), projected density of states (PDOS), charge transfer, and electron difference density. The (5, 5) AlNNT exhibits an energy bandgap value of 3.31 eV, implying its semiconducting nature. Furthermore, the pure system's chemical potential was -4.12 eV. The DOS examination shows that the pristine system's band structure profile and energy states match well. Notably, the valence band displays a more pronounced level of energy hybridization compared to the conduction band, which is reflected in the band structure. Functionalization of AlNNT with amino acids enhances the p character and polar covalency, thereby increasing the percentage ionic character and Gibb's free energy of solvation which are essential parameters to determine the aqueous solubility.

First-principles study of aromatic amino acid encapsulation in single-walled BN and AlN nanotubes

Aromatic molecules exhibit strong non-covalent interactions with nanotubes, influencing their encapsulation properties. This study uses DFT calculations to explore the encapsulation of aromatic amino acids within zigzag (ZZ), chiral (R/S), and armchair (AC) single-walled aluminum nitride nanotubes (AlNNTs) and boron nitride nanotubes (BNNTs). The results reveal that zigzag AlNNTs exhibit the highest encapsulation affinity compared to other chiralities, while chiral BNNTs show enhanced encapsulation. Encapsulation energy decreases with increasing nanotube radius, indicating reduced affinity. Overall, the studied BNNTs demonstrate stronger encapsulation energy compared to AlNNTs. The bandgap energy of the encapsulated structures varies significantly with nanotube diameter and chirality. The physisorption process plays a major role in encapsulation, affecting the geometric and electronic properties of the nanotubes and enhancing the stability and efficacy of the encapsulated amino acids. These findings highlight the potential of these nanostructures for advanced applications, including targeted drug delivery and molecular sensing.

Quantum-mechanical understanding on structure dependence of image potentials of single-walled boron nitride nanotubes

Quantum-mechanical understanding on structure dependence of image potentials of single-walled boron nitride nanotubes

Electronic structure of ultrathin single-walled platinum nanotubes

Using Density Functional Theory based on the plane wave method and linearized augmented cylindrical wave method, and taking into account the spin–orbit interaction, the structural, electronic and spin properties of ultrathin single-walled nanotubes consisting of six platinum rows are obtained. The nanotubes are found to possess metallic electronic mobility, including the nonchiral Pt(6,0) with the largest number (15G0) of ballistic channels. Analysis of the density of electronic states at Fermi level revealed that the chiral Pt(5,1) has a difference in concentration of mobile electrons with opposite spins of 1.42 times, and up to 3–4 times under a weak torsional strain.

Synthesis Route to Single-Walled Zeolite Nanotubes Enabled by Tetrabutylammonium Hydroxide.

Single-walled zeolite nanotubes (ZNT) were recently synthesized in a narrow compositional window. ZNT structural features-thin zeolitic walls and large mesopores-can allow for easy access of small molecules to zeolite micropores, but they also impart processing limitations for these materials, such as challenges with conventional aqueous ion-exchange conditions. Conventional solid- and liquid-phase ion exchange of calcined NaOH-derived ZNT (NaH-ZNT) results in structural degradation to either 2D sheet-like phases, 3D nanocrystals, or amorphous phases, motivating different direct synthesis routes and unconventional ion-exchange procedures of uncalcined ZNT precursors. Here, a modified synthesis route for ZNT synthesis is introduced that facilitates facile ion exchange as well as incorporation of additional non-Al heteroatoms in the zeolite framework. Tetrabutylammonium hydroxide (TBAOH) is used as a hydroxide source and co-OSDA, enabling synthesis of new compositions of ZNT, otherwise unachievable by post-modification of previously reported NaH-ZNT. By varying the gel composition, synthesis temperature, crystallization time, hydroxide source, silicon source, and aluminum source, productive conditions for the new TBAOH synthesis are developed, leading to increased strong acid site density in the ZNT. The collected results demonstrate the sensitivity of the ZNT synthesis to many key parameters and show that the ZNT forms only when Si/(Al + T) ∼ 30 in these synthesis gels and with specific Si and Al sources, and always in the presence of trace Na+. Catalytic testing, via the tandem CO2 hydrogenation to methanol and methanol to aromatics reaction, shows that ZNTs provide adequate catalytic activity (acidity), relative to their conventional 3D counterparts in converting methanol to aromatic compounds.

First-principles study of electronic and magnetic properties of Ag- and Au-doped single-walled (6,0) SiC nanotubes: DFT study

First-principles study of electronic and magnetic properties of Ag- and Au-doped single-walled (6,0) SiC nanotubes: DFT study

(Invited) Is the [5,5] C120-D5d Fullertube a Metal?

Single-walled nanotubes (SWNTs) with a roll-up vector (n = m) have long been predicted to exhibit metallic behavior at infinite nanotube lengths.1 Moreover, in contrast with normal metals, armchair nanotubes e.g., [5,5] should result in exceptional ballistic transport properties.2 However, the question remains at what finite length of a SWNT or fullertube does metallic character begin, if at all. From a computational viewpoint, Cioslowski has shown that the HOMO-LUMO bandgap decreases to ~1 eV in an oscillatory fashion in approaching [5,5] C200 fullertubes.3 Although the HOMO-LUMO gap has been extensively used to predict the kinetic stability of fullerenes and metallofullerenes with less than 100 carbon atoms, Fowler has argued that the HOMO-LUMO gap can not be used to predict the kinetic stability of large fullerenes.4 More recently, Lilijeroth and coworkers have measured the experimental and DFT HOMO-LUMO gap for graphene nanoribbons (GNR) and find that GNRs with lengths of 5 nm have bandgaps of ~0.1 eV.5 These workers also point out that DFT calculated HOMO-LUMO bandgaps are always overestimated relative to experimental values. In this presentation, I will present the evidence in support of metallic character for [5,5] C120-D5d.6,7

Boosting electrochemical performance of single-walled carbon nanotube three-dimensional architectures through appropriate selection of organic dispersant

The choice of organic dispersant in the fabrication of 3D carbon nanotube architectures affects their macroscopic properties. Binder-free papers (referred to as buckypapers, BPs) consisting of single-walled nanotubes (SWCNTs) fabricated by vacuum filtration of nanotube suspensions in isopropanol, ethanol, benzoic acid dissolved in ethanol and lemon oil show a work of adhesion of water that varies from 25.7 to 112.2 mJ·m−2. Bulk electrical resistivity also changes significantly from 145 to 1010 mΩ cm. Raman and FTIR spectra of pristine SWCNTs and BPs show evidence of permanent adsorption of organic molecules on SWCNTs. Heterogeneous electron transfer (HET) standard rate constants, k0, for ferro/ferricyanide and hexaammineruthenium(II)/(III) redox probes estimated from cyclic voltammetry measurements on BP electrodes vary from 12.6×10−4cms−1 to 32.7×10−4cms−1 and 12.8×10−4cms−1 to 26.0×10−4cms−1, respectively, depending on the dispersant used. Calculations using the Gerischer-Marcus model show that molecules adsorbed act as electron donors that boost HET kinetics and cause a shift in the reaction half-wave potential. The level of doping of nanotubes depends on the dipole moment of the dispersant molecules and proton affinity. Thus, the electrocatalytic activity of three-dimensional architectures composed of nanotubes can be adjusted by selecting an appropriate dispersant.

Nanotubes from Transition Metal Dichalcogenides: Recent Progress in the Synthesis, Characterization and Electrooptical Properties.

Inorganic layered compounds (2D-materials), particularlytransition metal dichalcogenide (TMDC), are the focus of intensive research in recent years. Shortly after the discovery of carbon nanotubes (CNTs) in 1991, it was hypothesized that nanostructures of 2D-materials can also fold and seam forming, thereby nanotubes (NTs). Indeed, nanotubes (and fullerene-like nanoparticles) of WS2 and subsequently from MoS2 were reported shortly after CNT. However, TMDC nanotubes received much less attention than CNT until recently, likely because they cannot be easily produced as single wall nanotubes with well-defined chiral angles. Nonetheless, NTs from inorganic layered compounds have become a fertile field of research in recent years. Much progress has been achieved in the high-temperature synthesis of TMDC nanotubes of different kinds, as well as their characterization and the study of their properties and potential applications. Their multiwall structure is found to be a blessing rather than a curse, leading to intriguing observations. This concise minireview is dedicated to the recent progress in the research of TMDC nanotubes. After reviewing the progress in their synthesis and structural characterization, their contributions to the research fields of energy conversion and storage, polymer nanocomposites, andunique optoelectronic devices are being reviewed. These studies suggest numerous potential applications for TMDC nanotubes in various technologies, which are briefly discussed.

The adsorption of CO and CO2 gases on (6,4) and (7,7) AlN nanotubes for enhanced sensor applications: A DFT approach

We perform total energy and electronic structure calculations to analyse the adsorption of Carbon dioxide and Carbon monoxide molecules on Si-doped single-walled aluminium nitride nanotubes (AlNNTs) of (7,7) and (6,4) chirality using local density approximation (LDA) in the framework of density functional theory (DFT). The results reveal that doped Si-(7,7) AlNNT system show highest sensing potential of approximately 80% of gas adsorption for both CO2 and CO. However, Si-(6,4) indicates a recovery time of 1.68 sec, and 6-fold better compared with Si-(7,7). We find that pristine (6,4) adsorbs both gases with longer recovery times, making it unsuitable as gases sensor and suggest that strong bonding exist between them making it difficult to dissociate. These findings demonstrate potential application of Si-doped aluminium nitride nanotubes as highly effective sensor for detecting CO2 and CO greenhouse gases and paving the way for the development of advance sensing technologies at the nanoscale.

Nanotube-mediated storage of methane and hydrogen: Insights from molecular simulation

We investigate the storage of methane (CH4) and hydrogen (H2) within single-walled nanotubes carbon, boron nitride (BN), and molybdenum disulfide (MoS2) nanotubes using Grand Canonical Monte Carlo (GCMC) algorithm. We observed that BN nanotubes exhibit the highest weight adsorption capacity for CH4 at 298 K, reaching up to 0.441 g/g at 8 MPa, closely aligning with the Department of Energy (DOE) target of 0.5 g/g. In contrast, MoS2 nanotubes, despite their larger radius, demonstrated the lowest weight adsorption capacity due to their higher atomic mass, with a value of 0.096 g/g at the same pressure. Volumetric adsorption capacity for CH4 was notably highest in (10,10) BN nanotubes, achieving 244 cm3/cm3 at 8 MPa, although this was still below the DOE target of 330 cm3/cm3. For hydrogen storage at 77 K, (30,30) BN nanotubes outperformed the 2025 DOE benchmarks of 5.5 wt% and 0.04 kg/L, with a weight adsorption of 12.19 wt% and a volumetric adsorption of 0.051 kg/L at 8 MPa, respectively. The adsorption heat within nanotubes showed a complex relationship with adsorption quantity, highlighting the interplay between fluid-wall and fluid-fluid interactions. The study also examines the impact of material structure on gas release, revealing a linear relationship between gas release and porosity or pore volume. The Ideal Adsorbed Solution Theory (IAST) was validated for predicting CH4/H2 mixture separations on amorphous carbon materials, and further reveals that the (30,30) BN nanotubes identified as the most suitable candidate for CH4/H2 separation, offering a balance of high CH4 adsorption capacity (20.2 mmol/g) and selectivity of 15 at 8 MPa.

Highly selective sensing of toxic NOx gases for environmental monitoring using Ru-doped single walled TiO2 nanotube: A density functional theory study

Applying density functional theory simulations, in this study, we examine the sensing properties of Ru-TNT surface towards NOx molecules such as NO and NO2. The obtained results show that Ru doping creates a large-spin density over the Ru-TNT surface, which hints at an increase in the adsorption energy of NOx molecules. The electronic properties of the Ru-TNT surface are significantly altered after NO and NO2 molecule adsorption, as proven by the larger change in the energy gap values. Moreover, the selectivity study indicates that the Ru-TNT is capable of selectively sensing the NOx molecules in the presence of other gases, e.g., CO2, CO, NH3 and H2O. Using an external positive electric field can resist the strong anchoring of NOx molecules over the Ru-TNT surface, suggesting that material recovery is feasible. Thus, the Ru-TNT structure can be applied as a selective, sensitive, and promising ambient temperature gas sensor for NOx molecules.

Effect of vacancy defect on the structural and electrical properties of single-walled silicon nanotube

The effect of vacancy defects on zigzag and armchair single-walled silicon nanotubes (SiNTs) has been investigated using the self-consistent charge density functional tight-binding (SCC-DFTB) method. The findings indicate that the introduction of defects leads to the inability of the smaller-diameter tube to uphold its tubular structure and cluster. Conversely, the larger-diameter tube undergoes an elliptical transformation, yet retains tubular characteristics and hexagonal structures displaying specific symmetry. The double vacancy defect alters the atomic arrangement on the side opposite the defect. The stability of single-walled SiNTs is related to defect type and chiral index. In addition, the single vacancy defect increases the binding energy and stability of the zigzag tube, while causing a rapid decrease in stability of the armchair tube (7,7). The spin polarization phenomenon manifests within the defect tube, resulting in the splitting of the initial degenerate energy band and a significant decrease in its degeneracy. The existence of electronic interaction, results in a prominent manifestation of vacancy-induced magnetism in armchair and zigzag defect tubes. This phenomenon gives rise to localized spin-up bands situated below the Fermi level, as well as localized spin-down bands positioned above the Fermi level. In the energy band structure of most nanotubes, there are conduction bands or valence bands passing through the Fermi level, leading to a transition from semiconductor to semimetal or metal properties.

Tuning the potentials of aluminum phosphide nanotube photocatalyst for wastewater treatment through band gap engineering: a DFT study

The photocatalytic properties of semiconductor materials, which are controllable through the design of the bandgap structure, make them a promising catalyst for wastewater treatment. This work investigated the photocatalytic properties of single-walled aluminum phosphide nanotube (SWAlPNT) doped with different concentrations of boron (B) atoms for wastewater treatment. Analysis of the structural, electronic and optical properties of the SWAlPNT photocatalyst was performed using the density functional theory approach in terms of plane wave basis set and pseudopotential. SWAlPNT was found to be stable to B doping with 3.6% and 7.1% concentrations. The obtained formation energy values of 12.33 eV, 12.00 eV and 11.98 eV and also cohesive energies of −0.82, eV, −0.75 eV and 0.79 eV for pristine, 3.6% and 7.1% B-doped SWAlPNTs, revealed the systems’ well mechanical and thermodynamic stabilities. Results also revealed that cohesive energy decreases with an increase in concentration of B dopant, which significantly enhances efficient thermal stability. Electronic band gap calculations revealed that pristine SWAlPNT demonstrated a direct band gap value of 0.2 eV. Due to B doping, an indirect band gap value of 1.4 eV was obtained with 3.6% B-doped SWAlPNT, which agreed well with band gaps of other photocatalysts used for wastewater purification. Analysis using optical absorption spectra revealed that 3.6% B-doped system absorbs visible light while 7.1% doped system absorbs both visible and ultraviolet light. This study found both 3.6% and 7.1% B-doped SWAlPNT as suitable photocatalysts for wastewater treatment under solar irradiation, with the 3.6% B-doped system demonstrating relatively better performance for wastewater treatment.

Analyze the temperature-dependent elastic properties of single-walled boron nitride nanotubes by a modified energy method

The elastic properties of boron nitride nanotubes (BNNTs) were investigated utilizing an enhanced energy method. By considering small deformations and applying the principle of minimum potential energy, the variations in atomic bonds and bond angles within the nanotube structure were determined. The modified model incorporated the contribution of inversion energy to the overall potential energy of the system, leading to the derivation of analytical expressions for the Young's modulus, shear modulus, and strain energy of both armchair and zigzag BNNTs under varying temperatures. The results indicate that compared to zigzag BNNTs, the impact of inversion energy on the elastic constants of armchair BNNTs is more significant, especially at small diameters (<1 nm). In thermal environment, this study demonstrates that the change in Young's modulus of BNNTs is lower than that of carbon nanotubes (CNTs), confirming the superior thermal stability of BNNTs over CNTs. Furthermore, molecular structure mechanics (MSM) and continuum mechanics models were employed to analyze the strain energy of BNNTs. The effects of different bonds, bond angles, and inversion angles on strain energy were analyzed in a thermal environment, revealing distinct differences between the two types of BNNTs. These findings provide more accurate theoretical guidance for thermal applications based on the stretching of BNNTs.

On the Determination of Elastic Properties of Single-Walled Nitride Nanotubes Using Numerical Simulation.

In recent years, tubular nanostructures have been related to immense advances in various fields of science and technology. Considerable research efforts have been centred on the theoretical prediction and manufacturing of non-carbon nanotubes (NTs), which meet modern requirements for the development of novel devices and systems. In this context, diatomic inorganic nanotubes formed by atoms of elements from the 13th group of the periodic table (B, Al, Ga, In, Tl) and nitrogen (N) have received much research attention. In this study, the elastic properties of single-walled boron nitride, aluminium nitride, gallium nitride, indium nitride, and thallium nitride nanotubes were assessed numerically using the nanoscale continuum modelling approach (also called molecular structural mechanics). The elastic properties (rigidities, surface Young's and shear moduli, and Poisson's ratio) of nitride nanotubes are discussed with respect to the bond length of the corresponding diatomic hexagonal lattice. The results obtained contribute to a better understanding of the mechanical response of nitride compound-based nanotubes, covering a broad range, from the well-studied boron nitride NTs to the hypothetical thallium nitride NTs.

Investigation of drug delivery capability of single-walled carbon and boron-nitride nanotubes, boron-nitride (B16N16), and C32 fullerenes as nanocarriers of captopril drug; DFT study

Density functional theory (DFT) calculations were performed on M062X/6-31G (d) and M062X/6-311G (d, p) surfaces to investigate the interaction of captopril molecules with single-walled carbon nanotubes (SWCNT) and C32 nanoclusters. In order to enhance adsorption, a doping method was employed, and structures of single-walled boron nitride nanotubes (SWBNNT) and boron nitride nanoclusters (B16N16) were selected for improved drug delivery purposes in this study. The adsorption energy of captopril on the nanostructures was calculated in both phases. In both phases, captopril adsorption energy on nanostructures was calculated. The negative values of adsorption energy showed that the interaction between captopril and nanostructures is exothermic. The adsorption energy values were higher in the gas phase compared to the aqueous phase, indicating a stronger interaction in the gas phase. The density of states (DOS) study was employed to evaluate the effect of molecular adsorption on the electronic properties of nanostructures. The results revealed that the B16N16 nanocluster approached the Fermi level more closely after drug adsorption compared to other nanostructures. Quantum Theory of Atoms in Molecules (QTAIM) calculations showed that there is a weak interaction between captopril and both nanostructures. Based on the adsorption energy values obtained from both methods, the interaction between captopril and SWCNT was found to be stronger than that between captopril and SWBNNT, whereas the interaction in the B16N16 nanocluster was found to be equal to that in C32-fullerene. Significant changes in ΔEg values were observed for Captopril@SWCNT and Captopril@B16N16-fullerene in each method, indicating the conductivity of these two structures increased more after captopril adsorption compared to other nanostructures. Therefore, SWBNNT and B16N16-fullerene can serve as captopril nanosensors.

Thermoelectric generator and temperature sensor based on polyamide doped n-type single-walled nanotubes toward self-powered wearable electronics

Due to its ability to convert body heat into electricity, organic thermoelectric material is considered a promising and smart maintenance-free power source to charge wearable electronics. However, developing flexible n-type organic thermoelectric materials and wearable p/n junction thermoelectric devices remains challenging. In this work, two insulated polyamides (PA6 and PA66) that have been widely used as fiber materials are employed as novel dopants for converting p-type single-walled carbon nanotubes (SWCNTs) to n-type thermoelectric materials. Because of the electron transferability of the amide group, polyamide-doped SWCNTs exhibit excellent thermopower values as large as −56.0 µV K−1 for PA66, and −54.5 µV K−1 for PA6. Thermoelectric devices with five p/n junctions connected in series are fabricated. The testing device produces a thermoelectric voltage of 43.1 mV and generates 1.85 µW thermoelectric power under temperature gradients of approximately 80 K. Furthermore, they display charming capability for temperature recognition and monitoring human activities as sensors. These promising results suggest that the flexible polyamide-doped SWCNT composites herein have high application potential as wearable thermoelectric electronics.