Single-walled Carbon Nanotube Paper Research Articles

A Suggested Vacuum Bagging Process for the Fabrication of Single-Walled Carbon Nanotube/Epoxy Composites That Maximize Electromagnetic Interference Shielding Effectiveness.

We designed and tested a manufacturing process that resulted in the formation of composites with maximized electrical conductivity and optimized electromagnetic interference (EMI) shielding effectiveness (SE) properties. Single-walled carbon nanotube (SWCNT) paper, which is a microscopic aggregate of van der Waals force interaction, was impregnated with semi-cured epoxy to make SWCNT prepregs. These prepregs were completely cured into SWCNT/epoxy composites. Fabricating and curing processes were executed under proper temperature cycle depending on the time. We inspected SWCNT paper and the interfacial state between the SWCNTs and epoxy in the composite with a field emission-scanning electron microscopy and calculated the SWCNT weight fraction through thermogravimetric analysis measurements. Using these observations, electrical conductivity and EMI SE were investigated according to thickness which could be controlled by the suggested manufacturing process as 1-, 5- and 10-layer composites. Finally, we determined ideal composite thickness and the associated number of prepreg layers using skin depth theory.

(Invited) Observation of the Marcus Inverted Region of Electron Transfer from Asymmetric Chemical Doping of Pristine (n,m) Single-Walled Carbon Nanotubes

The concept of electrical energy generation based on asymmetric chemical doping of single-walled carbon nanotube (SWNT) papers is presented. We explore 27 small, organic, electron-acceptor molecules that are shown to tune the output open-circuit voltage (VOC) across three types of pristine SWNT papers with varying (n,m) chirality distributions. A considerable enhancement in the observed VOC, from 80 to 440 mV, is observed for SWNT/molecule acceptor pairs that have molecular volume below 120 Å3 and lowest unoccupied molecular orbital (LUMO) energies centered around −0.8 eV. The electron transfer (ET) rate constants driving the VOC generation are shown to vary with the chirality-associated Marcus theory, suggesting that the energy gaps between SWNT and the LUMO of acceptor molecules dictate the ET process. When the ET rate constants and the maximum VOC are plotted versus the LUMO energy of the acceptor organic molecule, volcano-shaped dependencies, characteristic of the Marcus inverted region, are apparent for three distinct sources of SWNT papers with modes in diameter distributions of 0.95, 0.83, and 0.75 nm. This observation, where the ET driving force exceeds reorganization energies, allows for an estimation of the outer-sphere reorganization energies with values as low as 100 meV for the (8,7) SWNT, consistent with a proposed image-charge modified Born energy model. These results expand the fundamental understanding of ET transfer processes in SWNT and allow for an accurate calculation of energy generation through asymmetric doping for device applications. Reference: J. Am. Chem. Soc., 2017, 139 (43), 15328–15336

Observation of the Marcus Inverted Region of Electron Transfer from Asymmetric Chemical Doping of Pristine (n,m) Single-Walled Carbon Nanotubes.

The concept of electrical energy generation based on asymmetric chemical doping of single-walled carbon nanotube (SWNT) papers is presented. We explore 27 small, organic, electron-acceptor molecules that are shown to tune the output open-circuit voltage (VOC) across three types of pristine SWNT papers with varying (n,m) chirality distributions. A considerable enhancement in the observed VOC, from 80 to 440 mV, is observed for SWNT/molecule acceptor pairs that have molecular volume below 120 Å3 and lowest unoccupied molecular orbital (LUMO) energies centered around -0.8 eV. The electron transfer (ET) rate constants driving the VOC generation are shown to vary with the chirality-associated Marcus theory, suggesting that the energy gaps between SWNT and the LUMO of acceptor molecules dictate the ET process. When the ET rate constants and the maximum VOC are plotted versus the LUMO energy of the acceptor organic molecule, volcano-shaped dependencies, characteristic of the Marcus inverted region, are apparent for three distinct sources of SWNT papers with modes in diameter distributions of 0.95, 0.83, and 0.75 nm. This observation, where the ET driving force exceeds reorganization energies, allows for an estimation of the outer-sphere reorganization energies with values as low as 100 meV for the (8,7) SWNT, consistent with a proposed image-charge modified Born energy model. These results expand the fundamental understanding of ET transfer processes in SWNT and allow for an accurate calculation of energy generation through asymmetric doping for device applications.

Ultrasensitive, Stretchable Strain Sensors Based on Fragmented Carbon Nanotube Papers.

The development of strain sensors featuring both ultra high sensitivity and high stretchability is still a challenge. We demonstrate that strain sensors based on fragmented single-walled carbon nanotube (SWCNT) paper embedded in poly(dimethylsiloxane) (PDMS) can sustain their sensitivity even at very high strain levels (with a gauge factor of over 107 at 50% strain). This record sensitivity is ascribed to the low initial electrical resistance (5-28 Ω) of the SWCNT paper and the wide change in resistance (up to 106 Ω) governed by the percolated network of SWCNT in the cracked region. The sensor response remains nearly unchanged after 10 000 strain cycles at 20% proving the robustness of this technology. This fragmentation based sensing system brings opportunities to engineer highly sensitive stretchable sensors.

Assembled graphene oxide and single-walled carbon nanotube ink for stable supercapacitors

Abstract

Effects of O 2 and N 2/H 2 plasma treatments on the neuronal cell growth on single-walled carbon nanotube paper scaffolds

The O 2 and N 2/H 2 plasma treatments of single-walled carbon nanotube (SWCNT) papers as scaffolds for enhanced neuronal cell growth were conducted to functionalize their surfaces with different functional groups and to roughen their surfaces. To evaluate the effects of the surface roughness and functionalization modifications of the SWCNT papers, we investigated the neuronal morphology, mitochondrial membrane potential, and acetylcholine/acetylcholinesterase levels of human neuroblastoma during SH-SY5Y cell growth on the treated SWCNT papers. Our results demonstrated that the plasma-chemical functionalization caused changes in the surface charge states with functional groups with negative and positive charges and then the increased surface roughness enhanced neuronal cell adhesion, mitochondrial membrane potential, and the level of neurotransmitter in vitro. The cell adhesion and mitochondrial membrane potential on the negatively charged SWCNT papers were improved more than on the positively charged SWCNT papers. Also, measurements of the neurotransmitter level showed an enhanced acetylcholine level on the negatively charged SWCNT papers compared to the positively charged SWCNT papers.

Fabrication and electrochemical properties of free-standing single-walled carbon nanotube film electrodes

An easily manipulative approach was presented to fabricate electrodes using free-standing single-walled carbon nanotube (SWCNT) films grown directly by chemical vapor deposition. Electrochemical properties of the electrodes were investigated. In comparison with the post-deposited SWCNT papers, the directly grown SWCNT film electrodes manifested enhanced electrochemical properties and sensitivity of sensors as well as excellent electrocatalytic activities. A transition from macroelectrode to nanoelectrode behaviours was observed with the increase of scan rate. The heat treatment of the SWCNT film electrodes increased the current signals of electrochemical analyser and background current, because the heat-treatment of the SWCNTs in air could create more oxide defects on the walls of the SWCNTs and make the surfaces of SWCNTs more hydrophilic. The excellent electrochemical properties of the directly grown and heat-treated free-standing SWCNT film electrodes show the potentials in biological and electrocatalytic applications.

Radiation effects in single-walled carbon nanotube papers

The effects of ionizing radiation on the temperature-dependent conductivity of single-walled carbon nanotube (SWCNT) papers have been investigated in situ in a high vacuum environment. Irradiation of the SWCNT papers with 4.2MeV alpha particles results in a steady decrease in the SWCNT paper conductivity, resulting in a 25% reduction in room temperature conductivity after a fluence of 3×1012 alpha particles/cm2. The radiation-induced temperature-dependent conductivity modification indicates that radiation damage causes an increase in the effective activation barrier for tunneling-like conductivity and a concomitant increase in wavefunction localization of charge carriers within individual SWCNTs. The spatial defect generation within the SWCNT paper was modeled and confirms that a uniform displacement damage dose was imparted to the paper. This allows the damage coefficient (i.e., differential change in conductivity with fluence) for alpha particles, carbon ions, and protons to be compared with the corresponding nonionizing energy loss (NIEL) of the incident particle. The resulting nonlinear relationship with NIEL between these parameters is distinct from the more typical linear response observed in many bulk semiconductors and superconductors and indicates that localized radiation damage in the SWCNT papers has a greater impact than distributed damage. Although SWCNT papers behave largely as a bulk material with properties that are a convolution of the underlying SWCNT distribution, the radiation response appears to be largely dominated by degradation in the preferred one-dimensional conduction within these two-dimensionally confined nanostructures.

Debundling of SWCNTs through a simple intercalation technique

An attempt was made to debundle single-walled carbon nanotube (SWCNT) bundle through intercalation techniques as in exfoliation of graphite. For this, SWCNT paper and lithium metal foil were simply short-circuited through electrolytes including lithium ions, and cathodic intercalation of lithium ions together with solvent molecules between the tubes that was expected to enlarge the spaces. It was found that the SWCNT paper could expand greatly through this technique using dimethyl sulfoxide electrolyte, and evidence of the intercalation reaction was confirmed by cyclic voltammetry. The paper after the debundling had some gaps between individual tubes in the bundles in the TEM picture, which were created through the present intercalation technique without any damage to the tubes themselves.

Electrochemical Hydrogen Storage in Single-Walled Carbon Nanotube Paper

Single-walled carbon nanotube (SWNT) papers were successfully prepared by dispersing SWNTs in Triton X-100 solution, then filtered by PVDF membrane (0.22 microm pore size). The electrochemical behavior and the reversible hydrogen storage capacity of single-walled carbon nanotube (SWNT) papers have been investigated in alkaline electrolytic solutions (6 N KOH) by cyclic voltammetry, linear micropolarization, and constant current charge/discharge measurements. The effect of thickness and the addition of carbon black on hydrogen adsorption/desorption were also investigated. It was found that the electrochemical charge-discharge mechanism occurring in SWNT paper electrodes is somewhere between that of carbon nanotubes (physical process) and that of metal hydride electrodes (chemical process), and consists of a charge-transfer reaction (Reduction/Oxidation) and a diffusion step (Diffusion).

Measuring the Adhesion Forces between Alkanethiol-Modified AFM Cantilevers and Single Walled Carbon Nanotubes

Nanotube/polymer composite interfaces are of interest for next generation composites. We have examined the adhesion between thiolated AFM cantilever tips and single walled carbon nanotube paper using chemical force microscopy. We have observed a direct correlation of adhesion force with respect to the thiol terminal group (NH2 > CH3 > OH). Our findings demonstrate that the interfacial interactions between single walled carbon nanotubes and terminally functionalized hydrocarbons can be evaluated with an atomic force microscope, provided that one accounts for variations in contact area caused by tip shape and sample topology.

Direct electron transfer of glucose oxidase on carbon nanotubes

In this report, exploitation of the unique properties of single-walled carbonnanotubes (SWNT) leads to the achievement of direct electron transfer with theredox active centres of adsorbed oxidoreductase enzymes. Flavin adeninedinucleotide (FAD), the redox active prosthetic group of flavoenzymes thatcatalyses important biological redox reactions and the flavoenzyme glucoseoxidase (GOx), were both found to spontaneously adsorb onto carbon nanotubebundles. Both FAD and GOx were found to spontaneously adsorb tounannealed carbon nanotubes that were cast onto glassy carbon electrodesand to display quasi-reversible one-electron transfer. Similarly, GOx wasfound to spontaneously adsorb to annealed, single-walled carbon nanotubepaper and to display quasi-reversible one-electron transfer. In particular,GOx immobilized in this way was shown, in the presence of glucose, tomaintain its substrate-specific enzyme activity. It is believed that thetubular fibrils become positioned within tunnelling distance of the cofactorswith little consequence to denaturation. The combination of SWNT withredox active enzymes would appear to offer an excellent and convenientplatform for a fundamental understanding of biological redox reactions aswell as the development of reagentless biosensors and nanobiosensors.