Single-shot Terahertz Research Articles

Single-Shot Direct Transmission Terahertz Imaging Based on Intense Broadband Terahertz Radiation.

There are numerous applications of terahertz (THz) imaging in many fields. However, current THz imaging is generally based on scanning technique due to the limited intensity of the THz sources. Thus, it takes a long time to obtain a frame image of the target and cannot meet the requirement of fast THz imaging. Here, we demonstrate a single-shot direct THz imaging strategy based on a broadband intense THz source with a frequency range of 0.1~23 THz and a THz camera with a frequency response range of 1~7 THz. This THz source was generated from the laser-plasma interaction, with its central frequency at ~12 THz. The frame rate of this imaging system was 8.5 frames per second. The imaging resolution reached 146.2 μm. With this imaging system, a single-shot THz image for a target object with a size of more than 7 cm was routinely obtained, showing a potential application for fast THz imaging. Furthermore, we proposed and tested an image enhancement algorithm based on an improved dark channel prior (DCP) theory and multi-scale retinex (MSR) theory to optimize the image brightness, contrast, entropy and peak signal-to-noise ratio (PSNR).

Ionizing terahertz waves with 260 MV/cm from scalable optical rectification.

Terahertz (THz) waves, known as non-ionizing radiation owing to their low photon energies, can actually ionize atoms and molecules when a sufficiently large number of THz photons are concentrated in time and space. Here, we demonstrate the generation of ionizing, multicycle, 15-THz waves emitted from large-area lithium niobate crystals via phase-matched optical rectification of 150-terawatt laser pulses. A complete characterization of the generated THz waves in energy, pulse duration, and focal spot size shows that the field strength can reach up to 260 megavolts per centimeter. In particular, a single-shot THz interferometer is employed to measure the THz pulse duration and spectrum with complementary numerical simulations. Such intense THz pulses are irradiated onto various solid targets to demonstrate THz-induced tunneling ionization and plasma formation. This study also discusses the potential of nonperturbative THz-driven ionization in gases, which will open up new opportunities, including nonlinear and relativistic THz physics in plasma.

DC electrical conductivity measurements of warm dense matter using ultrafast THz radiation

We describe measurements of the DC electrical conductivity of warm dense matter using ultrafast terahertz (THz) pulses. THz fields are sufficiently slowly varying that they behave like DC fields on the timescale of electron–electron and electron–ion interactions and hence probe DC-like responses. Using a novel single-shot electro-optic sampling technique, the electrical conductivity of the laser-generated warm dense matter was determined with <1 ps temporal resolution. We present the details of the single-shot THz detection methodology as well as considerations for warm dense matter experiments. We, then, provide proof-of-concept studies on aluminum driven to the warm dense matter regime through isochoric heating and shock compression. Our results indicate a decrease in the conductivity when driven to warm dense matter conditions and provide a platform for future warm dense matter studies.

Perspectives on ultraintense laser-driven terahertz radiation from plasmas

High-power terahertz (THz) radiation is fundamental to numerous applications in many fields. Ultraintense laser-produced plasmas have attracted ever-increasing interest as a damage-free medium for generating high-peak-power THz pulses. This article gives the authors' perspectives on how the field of ultraintense laser-driven THz radiation from plasmas developed and where the field is headed. In particular, recent advances and some new ideas are outlined in terms of THz genesis, metrology, and applications. In addition to pushing the limits of achievable THz pulse energies and peak powers, much attention will be paid on the tunability of THz properties. Single-shot THz metrology will develop toward multi-dimensional resolution. The resulting extreme THz radiation offers immense opportunities in the THz control over matter and THz-driven strong-field physics. A selection of illustrative application cases in the field of materials, chemistry, and biology are briefly discussed. In the authors' opinion, the concerted advances in these aspects will propel this field into the bright future.

Recording the angular dispersion of a terahertz beam into its frequency spectrum for fast measurements.

The frequency-dependent divergence angle of terahertz (THz) beams is a crucial aspect in understanding the generation and transmission of broadband THz waves. However, traditional beam profiling methods, such as 1D or 2D translation/rotation scanning detection, are time-consuming and wasteful of THz energy, making them unsuitable for fast measurement applications, such as single-shot THz generation and detection. Here, we proposed a simple solution that involves passing the THz beam through a core-anti-resonant reflective (CARR) cavity (e.g., a paper tube). The spatial information of the beam is then recorded into its frequency spectrum, which can be easily detected by a following traditional THz time-domain spectroscopy (TDS) system or a single-shot sampling setup. Our method enables the acquisition of the angular dispersion without repetitive measurements, and represents a significant step forward in fast and efficient achievement of spatial properties of broadband THz beams.

Single-shot ultrafast terahertz photography

Multidimensional imaging of transient events has proven pivotal in unveiling many fundamental mechanisms in physics, chemistry, and biology. In particular, real-time imaging modalities with ultrahigh temporal resolutions are required for capturing ultrashort events on picosecond timescales. Despite recent approaches witnessing a dramatic boost in high-speed photography, current single-shot ultrafast imaging schemes operate only at conventional optical wavelengths, being suitable solely within an optically-transparent framework. Here, leveraging on the unique penetration capability of terahertz radiation, we demonstrate a single-shot ultrafast terahertz photography system that can capture multiple frames of a complex ultrafast scene in non-transparent media with sub-picosecond temporal resolution. By multiplexing an optical probe beam in both the time and spatial-frequency domains, we encode the terahertz-captured three-dimensional dynamics into distinct spatial-frequency regions of a superimposed optical image, which is then computationally decoded and reconstructed. Our approach opens up the investigation of non-repeatable or destructive events that occur in optically-opaque scenarios.

Pulse-to-pulse detection of terahertz radiation emitted from the femtosecond laser ablation process.

Determining the dynamics of electrons and ions emitted from a target material during laser ablation is crucial for desirable control of laser processing. However, these dynamics are still challenging to understand because of a lack of ubiquitous spectroscopic tools to observe tangled-up dynamics appearing at ultrafast timescales. Here by harnessing highly sensitive single-shot terahertz time-domain spectroscopy using an echelon mirror, we investigate pulse-to-pulse temporal profile of terahertz radiation generated from the material surface. We clearly found that the carrier-envelope phase and the electric field amplitude of the terahertz waveform systematically vary between the pre- and post-ablation depending on the laser fluence and irradiated pulse numbers. Our results provide a stepping-stone towards perception of Coulomb explosion occurring throughout the laser ablation process, which is indispensable for future laser processing applications.

Terahertz-wave decoding of femtosecond extreme-ultraviolet light pulses

In recent years, femtosecond extreme-ultraviolet (XUV) and x-ray pulses from free-electron lasers have developed into important probes to monitor processes and dynamics in matter on femtosecond-time and angstrom-length scales. With the rapid progress of versatile ultrafast x-ray spectroscopy techniques and more sophisticated data analysis tools, accurate single-pulse information on the arrival time, duration, and shape of the probing x-ray and XUV pulses becomes essential. Here, we demonstrate that XUV pulses can be converted into terahertz electromagnetic pulses using a spintronic terahertz emitter. We observe that the duration, arrival time, and energy of each individual XUV pulse is encoded in the waveform of the associated terahertz pulses, and thus can be readily deduced from single-shot terahertz time-domain detection.

Single-shot terahertz polarization detection based on terahertz time-domain spectroscopy

This paper presents a novel design for single-shot terahertz polarization detection based on terahertz time-domain spectroscopy (THz-TDS). Its validity has been confirmed by comparing its detection results with those of the THz common-path spectral interferometer through two separate measurements for the orthogonal components. Our results also show that its detection signal-to-noise ratios (SNRs) are obviously superior to those of the 45° optical bias THz-TDS by electro-optical sampling due to its operation on common-path spectral interference rather than the polarization-sensitive intensity modulation. The setup works without need of any optical scan, which does not only save time, but also efficiently avoids the disturbances from the fluctuations of the system and environment. Its single-shot mode allows it to work well for the applications with poor or no repeatability.

Phase Diversity Electro-optic Sampling: A new approach to single-shot terahertz waveform recording

Recording electric field evolution in single-shot with THz bandwidth is needed in science including spectroscopy, plasmas, biology, chemistry, Free-Electron Lasers, accelerators, and material inspection. However, the potential application range depends on the possibility to achieve sub-picosecond resolution over a long time window, which is a largely open problem for single-shot techniques. To solve this problem, we present a new conceptual approach for the so-called spectral decoding technique, where a chirped laser pulse interacts with a THz signal in a Pockels crystal, and is analyzed using a grating optical spectrum analyzer. By borrowing mathematical concepts from photonic time stretch theory and radio-frequency communication, we deduce a novel dual-output electro-optic sampling system, for which the input THz signal can be numerically retrieved—with unprecedented resolution—using the so-called phase diversity technique. We show numerically and experimentally that this approach enables the recording of THz waveforms in single-shot over much longer durations and/or higher bandwidth than previous spectral decoding techniques. We present and test the proposed DEOS (Diversity Electro-Optic Sampling) design for recording 1.5 THz bandwidth THz pulses, over 20 ps duration, in single-shot. Then we demonstrate the potential of DEOS in accelerator physics by recording, in two successive shots, the shape of 200 fs RMS relativistic electron bunches at European X-FEL, over 10 ps recording windows. The designs presented here can be used directly for accelerator diagnostics, characterization of THz sources, and single-shot Time-Domain Spectroscopy.

High-throughput terahertz spectral line imaging using an echelon mirror.

This work demonstrates terahertz (THz) line imaging that acquires broadband spectral information by combining echelon-based single-shot THz spectroscopy with high-sensitivity phase-offset electrooptic detection. An approximately 40 dB signal-to-noise ratio is obtained for a THz spectrum from a single line of the camera, with a detection bandwidth up to 2 THz at the peak electric-field strength of 1.2 kV/cm. The spatial resolution of the image is confirmed to be diffraction limited for each spectral component of the THz wave. We use the system to image sugar tablets by quickly scanning the sample, which illustrates the capacity of the proposed spectral line imaging system for high-throughput applications.

A compact platform for efficient generation and single-shot measurement of high-field terahertz wave with a broadband naturally synchronized mid-infrared source

High-field terahertz (THz) wave is a powerful tool for investigating ultrafast dynamics such as the motion of electrons, the vibration of crystal lattices, the precession of spin, etc. In this letter, we demonstrate the generation of intense single-cycle THz pulses from an organic crystal DSTMS (4-N, N-dimethylamino-4'-N'-methyl–stilbazolium 2,4,6–trimethylbenzenesulfonate) via optical rectification. The generated THz field is characterized by single-shot electro-optic sampling with a linearly chirped probe beam. Meanwhile, the spectrum of the infrared pump is broadened to an octave which supports a 1.9-cycle pulse duration. The proposed scheme displays a sophisticated platform of efficient high-field THz generation, single-shot THz measurement, and a broadband mid-infrared source which is naturally synchronized with the THz pulses.

Single-shot terahertz spectrometer using a microbolometer camera

We demonstrate a single-shot terahertz spectrometer consisting of a modified Mach–Zehnder interferometer and a microbolometer focal plane array. The spectrometer is simple to use and can measure terahertz field autocorrelations and spectral power with no moving parts and no ultrashort-pulsed laser. It can effectively detect radiation at 10–40 THz when tested with a thermal source. It can also be used to measure the complex refractive index of a sample material. In principle, it can characterize both laser-based and non-laser-based terahertz sources and potentially cover 1–10 THz with specially designed terahertz microbolometers.

Dynamics of a Persistent Insulator-to-Metal Transition in Strained Manganite Films.

Transition metal oxides possess complex free-energy surfaces with competing degrees of freedom. Photoexcitation allows shaping of such rich energy landscapes. In epitaxially strained La_{0.67}Ca_{0.33}MnO_{3}, optical excitation with a sub-100-fs pulse above 2 mJ/cm^{2} leads to a persistent metallic phase below 100K. Using single-shot optical and terahertz spectroscopy, we show that this phase transition is a multistep process. We conclude that the phase transition is driven by partial charge-order melting, followed by growth of the persistent metallic phase on longer timescales. A time-dependent Ginzburg-Landau model can describe the fast dynamics of the reflectivity, followed by longer timescale in-growth of the metallic phase.

Terahertz Faraday and Kerr rotation spectroscopy of Bi1−xSbx films in high magnetic fields up to 30 tesla

We report results of terahertz Faraday and Kerr rotation spectroscopy measurements on thin films of $\text{Bi}_{1-x}\text{Sb}_{x}$, an alloy system that exhibits a semimetal-to-topological-insulator transition as the Sb composition $x$ increases. By using a single-shot time-domain terahertz spectroscopy setup combined with a table-top pulsed mini-coil magnet, we conducted measurements in magnetic fields up to 30~T, observing distinctly different behaviors between semimetallic ($x < 0.07$) and topological insulator ($x > 0.07$) samples. Faraday and Kerr rotation spectra for the semimetallic films showed a pronounced dip that blue-shifted with the magnetic field, whereas spectra for the topological insulator films were positive and featureless, increasing in amplitude with increasing magnetic field and eventually saturating at high fields ($>$20~T). Ellipticity spectra for the semimetallic films showed resonances, whereas the topological insulator films showed no detectable ellipticity. To explain these observations, we developed a theoretical model based on realistic band parameters and the Kubo formula for calculating the optical conductivity of Landau-quantized charge carriers. Our calculations quantitatively reproduced all experimental features, establishing that the Faraday and Kerr signals in the semimetallic films predominantly arise from bulk hole cyclotron resonances while the signals in the topological insulator films represent combined effects of surface carriers originating from multiple electron and hole pockets. These results demonstrate that the use of high magnetic fields in terahertz magnetopolarimetry, combined with detailed electronic structure and conductivity calculations, allows us to unambiguously identify and quantitatively determine unique contributions from different species of carriers of topological and nontopological nature in Bi$_{1-x}$Sb$_x$.

Corrections to “Single-Shot Terahertz Time Profiling Using Curved Wavefront” [Sep 18 528-534

Corrections to “Single-Shot Terahertz Time Profiling Using Curved Wavefront” [Sep 18 528-534

Toward quasi-DC conductivity of warm dense matter measured by single-shot terahertz spectroscopy.

We present an experimental setup capable of measuring the near DC conductivity of laser generated warm dense matter using single-shot terahertz time-domain spectroscopy. The setup uses a reflective echelon and balanced detection to record THz waveforms with a minimum detectable signal of 0.2% in a single laser pulse. We describe details of the experimental setup and the data analysis procedure and present single-shot terahertz transmission data on aluminum that has been laser heated to an electron temperature of 0.5 eV.

Improved common-path spectral interferometer for single-shot terahertz detection

To seek high signal-to-noise ratio (SNR) is critical but challenging for single-shot intense terahertz (THz) coherent detection. This paper presents an improved common-path spectral interferometer for single-shot THz detection with a single chirped pulse as the probe for THz electro-optic (EO) sampling. Here, the spectral interference occurs between the two orthogonal polarization components with a required relative time delay generated with only a birefringent plate after the EO sensor. Our experiments show that this interferometer can effectively suppress the noise usually suffered in a non-common-path interferometer. The measured single-shot SNR is up to 88.85, and the measured THz waveforms are independent of the orientation of the used ZnTe EO sensor, so it is easy to operate and the results are more reliable. These features mean that the interferometer is quite qualified for applications where strong THz pulses, usually with single-shot or low repetition rate, are indispensable.

Common-path spectral interferometry for single-shot terahertz electro-optics detection.

We propose a common-path spectral interferometer for single-shot terahertz (THz) electro-optics (EO) detection, where a probe pulse pair with orthogonal polarizations and a relative time delay are generated by simply using a birefringent plate. One of them, as the object, transmits through a THz EO crystal with THz phase modulation, while the other goes through the crystal without any phase imposed by target the THz field as the reference. The co-axial propagation of the pulse pair can effectively reduce the noises due to mechanical vibrations, air turbulences, and temperature fluctuations in the traditional non-common-path spectral interferometers. Our experiments show that, for a given target THz pulse field, the measured THz signals in a single-shot mode have a signal-to-noise ratio (SNR) of 41.2 with our THz common-path spectral interferometer, but 7.91 with a THz Mach-Zehnder spectral interferometer; thus, our design improves the SNR of the THz signal by about 5.2 times.

Self-referenced single-shot THz detection.

We demonstrate a self-referencing method to reduce noise in a single-shot terahertz detection scheme. By splitting a single terahertz pulse and using a reflective echelon, both the signal and reference terahertz time-domain waveforms were measured using one laser pulse. Simultaneous acquisition of these waveforms significantly reduces noise originating from shot-to-shot fluctuations. We show that correlation function based referencing, which is not limited to polarization dependent measurements, can achieve a noise floor that is comparable to state-of-the-art polarization-gated balanced detection. Lastly, we extract the DC conductivity of a 30 nm free-standing gold film using a single THz pulse. The measured value of σ0 = 1.3 ± 0.4 × 107 S m-1 is in good agreement with the value measured by four-point probe, indicating the viability of this method for measuring dynamical changes and small signals.