Single Myofibrils Research Articles

Oscillatory work and the step that generates force in single myofibrils from rabbit psoas.

The elementary molecular step that generates force by cross-bridges (CBs) in active muscles has been under intense investigation in the field of muscle biophysics. It is known that an increase in the phosphate (Pi) concentration diminishes isometric force in active fibers, indicating a tight coupling between the force generation step and the Pi release step. The question asked here is whether the force generation occurs before Pi release or after release. We investigated the effect of Pi on oscillatory work production in single myofibrils and found that Pi-attached state(s) to CBs is essential for its production. Oscillatory work is the mechanism that allows an insect to fly by beating its wings, and it also has been observed in skeletal and cardiac muscle fibers, implying that it is an essential feature of all striated muscle types. With our studies, oscillatory work disappears in the absence of Pi in experiments using myofibrils. This suggests that force is generated during a transition between steps of oscillatory work production, and that the states involved in force production must have Pi attached. With sinusoidal analysis, we obtained the kinetic constants around the Pi release steps, established a CB scheme, and evaluated force generated (and supported) by each CB state. Our results demonstrate that force is generated before Pi is released, and the same force is maintained after Pi is released. Stretch activation and/or delayed tension can also be explained with this CB scheme and forms the basis of force generation and oscillatory work production.

Does titin cleavage eliminate passive force and sarcomeric structure integrity in single myofibrils?

Does titin cleavage eliminate passive force and sarcomeric structure integrity in single myofibrils?

Gaining new understanding of sarcomere length non-uniformities in skeletal muscles.

Sarcomere lengths are non-uniform on all structural levels of mammalian skeletal muscle. These non-uniformities have been associated with a variety of mechanical properties, including residual force enhancement and depression, creep, increased force capacity, and extension of the plateau of the force-length relationship. However, the nature of sarcomere length non-uniformities has not been explored systematically. The purpose of this study was to determine the properties of sarcomere length non-uniformities in active and passive muscle. Single myofibrils of rabbit psoas (n = 20; with 412 individual sarcomeres) were subjected to three activation/deactivation cycles and individual sarcomere lengths were measured at 4 passive and 3 active points during the activation/deactivation cycles. The myofibrils were divided into three groups based on their initial average sarcomere lengths: short, intermediate, and long average sarcomere lengths of 2.7, 3.2, and 3.6µm. The primary results were that sarcomere length non-uniformities did not occur randomly but were governed by some structural and/or contractile properties of the sarcomeres and that sarcomere length non-uniformities increased when myofibrils went from the passive to the active state. We propose that the mechanisms that govern the systematic sarcomere lengths non-uniformities observed in active and passive myofibrils may be associated with the variable number of contractile proteins and the variable number and the adjustable stiffness of titin filaments in individual sarcomeres.

Measuring the Contractile Kinetics of Isolated Myofibrils from Human-Induced Pluripotent Stem Cell Derived Cardiomyocyte (hiPSC-CM) Models of Cardiomyopathy.

Isolated myofibrils provide biomechanical data at the contractile organelle level that are independent of cellular calcium handling and signaling pathways. These myofibrils can be harvested from animal tissue, human muscle biopsies, or stem cell-derived striated muscle. Here we present our myofibril isolation and rapid solution switching protocols, which allow for precise measurements of activation (kinetics and tension generation) and a biphasic relaxation relationship (initial slow isometric relaxation followed by a fast exponential decay in tension). This experiment is generated on a custom-built myofibril apparatus utilizing a two-photodiode array to detect micron level deflection of our forged glass tip force transducers. A complete activation/relaxation curve can be produced from a single myofibril in under 30minutes.

Multiscale Passive Mechanical Characterization of Rodent Skeletal Muscle

PurposeTo experimentally measure selected passive properties of skeletal muscle at three different scales (macroscopic scale: whole muscle, microscopic scale: single skinned fiber, and submicron scale: single myofibril) within the same animal model (mice), and to compare a primarily slow-twitch fiber muscle (soleus) and a primarily fast-twitch fiber muscle (extensor digitorum longus, EDL) for each scale. MethodsHealthy 3 months old wild-type C57BL6 mice were used. To characterize each scale, soleus (N = 11), EDL (N = 9), slow fibers (N = 17), fast fibers (N = 16), and myofibrils from soleus (N = 11) and EDL (N = 11) were harvested. Passive mechanical (ramp, relaxation) tests were applied at each scale to compare the passive properties (Young's modulus, static and dynamic stresses) within a given scale, across scales and between muscle types. ResultsThe soleus and EDL showed significant passive mechanical differences at the macroscopic scale while no variation was observed between both tissues at the microscopic and submicron scales. The results highlight the importance of the scale that is used to mechanically characterize a multiscale tissue. ConclusionThe present work will allow for a better understanding of the multiscale passive mechanical properties for two muscles with vastly differing physiological and metabolic properties. This study provides referent data to the body of literature that can be built upon in future work.

Depressed myocardial cross-bridge cycling kinetics in a female guinea pig model of diastolic heart failure.

Cardiac hypertrophy is associated with diastolic heart failure (DHF), a syndrome in which systolic function is preserved but cardiac filling dynamics are depressed. The molecular mechanisms underlying DHF and the potential role of altered cross-bridge cycling are poorly understood. Accordingly, chronic pressure overload was induced by surgically banding the thoracic ascending aorta (AOB) in ∼400 g female Dunkin Hartley guinea pigs (AOB); Sham-operated age-matched animals served as controls. Guinea pigs were chosen to avoid the confounding impacts of altered myosin heavy chain (MHC) isoform expression seen in other small rodent models. In vivo cardiac function was assessed by echocardiography; cardiac hypertrophy was confirmed by morphometric analysis. AOB resulted in left ventricle (LV) hypertrophy and compromised diastolic function with normal systolic function. Biochemical analysis revealed exclusive expression of β-MHC isoform in both sham control and AOB LVs. Myofilament function was assessed in skinned multicellular preparations, skinned single myocyte fragments, and single myofibrils prepared from frozen (liquid N2) LVs. The rates of force-dependent ATP consumption (tension-cost) and force redevelopment (Ktr), as well as myofibril relaxation time (Timelin) were significantly blunted in AOB, indicating reduced cross-bridge cycling kinetics. Maximum Ca2+ activated force development was significantly reduced in AOB myocytes, while no change in myofilament Ca2+ sensitivity was observed. Our results indicate blunted cross-bridge cycle in a β-MHC small animal DHF model. Reduced cross-bridge cycling kinetics may contribute, at least in part, to the development of DHF in larger mammals, including humans.

Slower Calcium Handling Balances Faster Cross-Bridge Cycling in Human MYBPC3 HCM.

The pathogenesis of MYBPC3-associated hypertrophic cardiomyopathy (HCM) is still unresolved. In our HCM patient cohort, a large and well-characterized population carrying the MYBPC3:c772G>A variant (p.Glu258Lys, E258K) provides the unique opportunity to study the basic mechanisms of MYBPC3-HCM with a comprehensive translational approach. We collected clinical and genetic data from 93 HCM patients carrying the MYBPC3:c772G>A variant. Functional perturbations were investigated using different biophysical techniques in left ventricular samples from 4 patients who underwent myectomy for refractory outflow obstruction, compared with samples from non-failing non-hypertrophic surgical patients and healthy donors. Human induced pluripotent stem cell (hiPSC)-derived cardiomyocytes and engineered heart tissues (EHTs) were also investigated. Haplotype analysis revealed MYBPC3:c772G>A as a founder mutation in Tuscany. In ventricular myocardium, the mutation leads to reduced cMyBP-C (cardiac myosin binding protein-C) expression, supporting haploinsufficiency as the main primary disease mechanism. Mechanical studies in single myofibrils and permeabilized muscle strips highlighted faster cross-bridge cycling, and higher energy cost of tension generation. A novel approach based on tissue clearing and advanced optical microscopy supported the idea that the sarcomere energetics dysfunction is intrinsically related with the reduction in cMyBP-C. Studies in single cardiomyocytes (native and hiPSC-derived), intact trabeculae and hiPSC-EHTs revealed prolonged action potentials, slower Ca2+ transients and preserved twitch duration, suggesting that the slower excitation-contraction coupling counterbalanced the faster sarcomere kinetics. This conclusion was strengthened by in silico simulations. HCM-related MYBPC3:c772G>A mutation invariably impairs sarcomere energetics and cross-bridge cycling. Compensatory electrophysiological changes (eg, reduced potassium channel expression) appear to preserve twitch contraction parameters, but may expose patients to greater arrhythmic propensity and disease progression. Therapeutic approaches correcting the primary sarcomeric defects may prevent secondary cardiomyocyte remodeling.

Different phosphorylation states of native titin filaments visualized by atomic force microscopy.

During muscle stretch, elastic or “passive” force develops which is mainly determined by the giant protein titin that forms the third filament system of muscle sarcomeres. The magnitude of this force is mainly dependent on the elasticity of the titin filaments, which is primarily determined by the structure of the polypeptide chain. However, it is suggested that post-translational modifications of titin, such as phosphokinase activity, regulate the sarcomeric passive force development. Mechanical studies on single myofibrils revealed that different protein kinases alter the passive tension of muscle, surprisingly, in opposite ways. This suggests that phosphorylation of sarcomeric proteins by various kinases is an essential regulatory mechanism of passive force. However, the extrapolation of these findings to titin's phosphorylation has not been studied so far at the single-molecule level. To reveal titin's structural alterations due to phosphorylation, single-molecule experiments must be carried out on individual titin molecules, where the effect of phosphorylation can be tested individually. In our work, we isolated individual titin molecules from rabbit and mouse skeletal muscle. The isolated native titin molecules showed high levels of phosphorylation, when stained with phosphoprotein gel stain. The isolated molecules were treated with lambda protein phosphatase to decrease the in situ phosphorylation level of the polymer. To investigate the effect of the treatment on titin's structure, we visualized surface-bound titin molecules by atomic force microscope and found that the C-terminal region of dephosphorylated titins collapses into a compact, coiled structure. Our findings suggest that the structure of the A-band region of titin is highly sensitive for phospohrylation which might play a role in controlling protein-titin interactions in the A-band.

Myofibril relaxation with mavacamten is modified by cMyBP-c.

cMyBP-C regulates contractile function through interactions with both thin and thick filaments. Mutations in cMyBP-C are linked to hypertrophic cardiomyopathy (HCM) which is characterized by impaired relaxation. We previously showed that the HCM L348P mutation increased binding affinity of cMyBP-C for actin and significantly prolonged cardiac relaxation in transgenic mice. Here we used single myofibril mechanics and our SpyC “cut and paste” system to study relaxation at high resolution. We first measured relaxation kinetics following ablation of the N-terminal part of cMyBP-C (C0-C7) and its replacement with recombinant C0-C7 domains. We also applied 1 μM mavacamten (Mava), a myosin inhibitor, during relaxation to determine whether effects of Mava depend on cMyBP-C. Results showed that acute ablation of N-terminal C0-C7 of cMyBP-C had no effect on activation kinetics at saturating Ca2+, but slightly increased the fast exponential phase of relaxation. In general, 1 μM Mava slowed the rate of force development and improved relaxation, in particular Mava accelerated the isometric linear phase of myofibril relaxation. Next, we measured effects of the L348P mutation as well as a shorter recombinant protein containing only the C0-C2 domains. Both proteins prolonged the time of isometric linear phase of relaxation. Relaxation in the presence of Mava reduced a new level of passive force relative to baseline in the absence of Mava and the magnitude of the reduction was greater in the presence of the L348P mutation. Interestingly, this effect was blunted in myofibrils in the absence of cMyBP-C or in the presence of C0-C2. We propose that effects of Mava depend on the presence of full-length cMyBP-C and HCM mutations may modulate these effects.

Residual force enhancement is reduced in permeabilized fiber bundles from mdm muscles.

Residual force enhancement (RFE) is the increase in steady-state force after active stretch relative to the force during isometric contraction at the same final length. The muscular dystrophy with myositis (mdm) mutation in mice, characterized by a small deletion in N2A titin, has been proposed to prevent N2A titin-actin interactions so that active mdm muscles are more compliant than wild type (WT). This decrease in active muscle stiffness is associated with reduced RFE. We investigated RFE in permeabilized soleus (SOL) and extensor digitorum longus (EDL) fiber bundles from WT and mdm mice. On each fiber bundle, we performed active and passive stretches from an average sarcomere length of 2.6-3.0 µm at a slow rate of 0.04 µms-1, as well as isometric contractions at the initial and final lengths. One-way ANOVA showed that SOL and EDL fiber bundles from mdm mice exhibited significantly lower RFE than WT mice (P<0.0001). This result is consistent with previous observations in single myofibrils and intact muscles. However, it contradicts the results from a previous study that appeared to show that compensatory mechanisms could restore titin force enhancement in single fibers from mdm psoas. We suggest that RFE measured previously in mdm single fibers was an artifact of the high variability in passive tension found in degenerating fibers, which begins after ∼24 days of age. The results are consistent with the hypothesis that RFE is reduced in mdm skeletal muscles owing to impaired Ca2+-dependent titin-actin interactions resulting from the small deletion in N2A titin.

What Can We Learn from Single Sarcomere and Myofibril Preparations?

Sarcomeres are the smallest functional contractile unit of muscle, and myofibrils are striated muscle organelles that are comprised of sarcomeres that are strictly aligned in series. Furthermore, passive forces in sarcomeres and myofibrils are almost exclusively produced by the structural protein titin, and all contractile, regulatory, and structural proteins are in their natural configuration. For these mechanical and structural reasons single sarcomere and myofibril preparations are arguably the most powerful to answer questions on the mechanisms of striated muscle contraction. We developed and optimized single myofibril research over the past 20 years and were the first to mechanically isolate and test single sarcomeres. The results from this research led to the uncovering of the crucial role of titin in muscle contraction, first molecular explanations for the origins of the passive and the residual force enhancement properties of skeletal and cardiac muscles, the discovery of sarcomere length stability on the descending limb of the force-length relationship, and culminating in the formulation of the three-filament theory of muscle contraction that, aside from actin and myosin, proposes a crucial role of titin in active force production. Aside from all the advantages and possibilities that single sarcomere and myofibril preparations offer, there are also disadvantages. These include the fragility of the preparation, the time-consuming training to master these preparations, the limited spatial resolution for length and force measurements, and the unavailability of commercial systems for single sarcomere/myofibril research. Ignoring the mechanics that govern serially linked systems, not considering the spatial resolution and associated accuracies of myofibril systems, and neglecting the fragility of myofibril preparations, has led to erroneous interpretations of results and misleading conclusions. Here, we will attempt to describe the methods and possible applications of single sarcomere/myofibril research and discuss the advantages and disadvantages by focusing on specific applications. It is hoped that this discussion may contribute to identifying the enormous potential of single sarcomere/myofibril research in discovering the secrets of muscle contraction.

Force Measurements From Myofibril to Filament.

Contractility, the generation of force and movement by molecular motors, is the hallmark of all muscles, including striated muscle. Contractility can be studied at every level of organization from a whole animal to single molecules. Measurements at sub-cellular level are particularly useful since, in the absence of the excitation-contraction coupling system, the properties of the contractile proteins can be directly investigated; revealing mechanistic details not accessible in intact muscle. Moreover, the conditions can be manipulated with ease, for instance changes in activator Ca2+, small molecule effector concentration or phosphorylation levels and introducing mutations. Subcellular methods can be successfully applied to frozen materials and generally require the smallest amount of tissue, thus greatly increasing the range of possible experiments compared with the study of intact muscle and cells. Whilst measurement of movement at the subcellular level is relatively simple, measurement of force is more challenging. This mini review will describe current methods for measuring force production at the subcellular level including single myofibril and single myofilament techniques.

Sarcomere length measurement reliability in single myofibrils

Sarcomere length non-uniformities occur at all structural levels of skeletal muscles and have been associated with important mechanical properties. Changes in sarcomere length non-uniformities in the nano- and sub-nanometer range have been used to explain muscle properties and contractile mechanisms. Typically, these measurements rely on light microscopy with a limited spatial resolution. One critical aspect in sarcomere length determination is the relatively arbitrary choice of intensity thresholds used to delineate sarcomere structures, such as A-bands or Z-lines. In experiments, these structures are typically distorted, intensity profiles vary, and baselines drift, resulting in asymmetric intensity patterns, causing changes in the centroid location of these structures depending on threshold choice, resulting in changes of sarcomere lengths. The purpose of this study was to determine the changes in (half-) sarcomere lengths associated with small changes in the A-band threshold choice. Sarcomere and half-sarcomere length changes for minute variations in A-band threshold were 28 nm (±28 nm) and 18 nm (±22 nm), respectively, and for the entire feasible range of thresholds across A-bands were 123 nm (±88 nm) and 99 nm (±105 nm), respectively. We conclude from these results that (half-) sarcomere lengths in the nanometer range obtained with light microcopy are noise, and the functional implications associated with such data should be discarded. We suggest that a functional resolution for sarcomere length of 100 nm (0.1 µm) is reasonable and 50 nm (0.05 µm) might be possible under ideal conditions.

Residual force enhancement is reduced in permeabilized fiber bundles from mdm muscles

Residual Force enhancement (RFE) is defined as the increase in steady state force after active stretch compared with force after isometric contraction at the same final length. Recent studies have demonstrated a pivotal role for titin in RFE. In myofibrils stretched beyond overlap of thick and thin filaments, Ca2+ activated myofibrils had a higher titin-based force and a steeper increase with force with stretch than passively stretched myofibrils at the same average sarcomere length. These results suggest higher titin-based stiffness in active myofibrils, perhaps due to N2A titin-actin interactions in active wild type (WT) muscle. Mdm mice carry a small deletion in titin that includes 53 amino acids in Ig83 in the N2A region. It has been proposed that the mdm mutation prevents N2A titin-actin interactions so that active mdm muscles are more compliant than WT muscles. This decrease in active muscle stiffness should be associated with a reduction in RFE. Based on this rationale, we investigated RFE in permeabilized soleus (SOL) and extensor digitorum longus (EDL) fiber bundles from 20-30 day old mdm mice (n=5), harvested at a young age to diminish the effects of degeneration and regeneration, and 30-60 day old WT mice (n=5). Contractile stress and RFE of EDL (mdm n=19 and WT n=20) and SOL fibers (WT n=19 and mdm n=16) was analyzed using JMP and Graph pad (PRISM) software. Statistics included Shapiro-Wilk (normality), Levene's and Bartlett (homogeneity of variances), Welch's one-way ANOVA (unequal variances), Dunnett's T3 (multiple comparisons), and T-tests with Welch's correction (unpaired). To investigate differences in RFE between genotypes, we performed isometric contractions, as well as active and passive stretch from an average sarcomere length of 2.6 - 3.0 µm on each fiber. This stretch amplitude, within the physiological range, resulted in no observable breakage or slipping of fibers during experiments. We predicted that mdm fiber bundles would show reduced RFE compared to WT fibers. Contractile stress when activated at 2.6 µm was significantly greater in WT EDL (Welch's one-way ANOVA; P<0.05) bundle and SOL (Welch's one-way ANOVA; P<0.05) compared to fiber bundles. Our results showed that mdm muscles exhibit significantly lower RFE than WT for both SOL (Welch's one-way ANOVA; P<0.0001) and EDL (Welch's one-way ANOVA; P<0.0001). This result is consistent with previous observations in single myofibrils and intact muscles. The data support the hypothesis that titin contributes to RFE. We suggest that RFE is reduced in mdm muscles due to impaired Ca2+ dependent titin-actin interactions, resulting from the small deletion in titin that includes 53 amino acids in Ig83 in the N2A region.

Phosphate has dual roles in cross-bridge kinetics in rabbit psoas single myofibrils.

In this study, we aimed to study the role of inorganic phosphate (Pi) in the production of oscillatory work and cross-bridge (CB) kinetics of striated muscle. We applied small-amplitude sinusoidal length oscillations to rabbit psoas single myofibrils and muscle fibers, and the resulting force responses were analyzed during maximal Ca2+ activation (pCa 4.65) at 15°C. Three exponential processes, A, B, and C, were identified from the tension transients, which were studied as functions of Pi concentration ([Pi]). In myofibrils, we found that process C, corresponding to phase 2 of step analysis during isometric contraction, is almost a perfect single exponential function compared with skinned fibers, which exhibit distributed rate constants, as described previously. The [Pi] dependence of the apparent rate constants 2πb and 2πc, and that of isometric tension, was studied to characterize the force generation and Pi release steps in the CB cycle, as well as the inhibitory effect of Pi. In contrast to skinned fibers, Pi does not accumulate in the core of myofibrils, allowing sinusoidal analysis to be performed nearly at [Pi] = 0. Process B disappeared as [Pi] approached 0 mM in myofibrils, indicating the significance of the role of Pi rebinding to CBs in the production of oscillatory work (process B). Our results also suggest that Pi competitively inhibits ATP binding to CBs, with an inhibitory dissociation constant of ∼2.6 mM. Finally, we found that the sinusoidal waveform of tension is mostly distorted by second harmonics and that this distortion is closely correlated with production of oscillatory work, indicating that the mechanism of generating force is intrinsically nonlinear. A nonlinear force generation mechanism suggests that the length-dependent intrinsic rate constant is asymmetric upon stretch and release and that there may be a ratchet mechanism involved in the CB cycle.

Extraction of Thick Filaments in Individual Sarcomeres Affects Force Production by Single Myofibrils

It has been accepted that the force produced by a skeletal muscle myofibril depends on its cross-sectional area but not on the number of active sarcomeres because they are arranged in series. However, a previous study performed by our group showed that blocking actomyosin interactions within an activated myofibril and depleting the thick filaments in one sarcomere unexpectedly reduced force production. In this study, we examined in detail how consecutive depletion of thick filaments in individual sarcomeres within a myofibril affects force production. Myofibrils isolated from rabbit psoas were activated and relaxed using a perfusion system. An extra microperfusion needle filled with a high-ionic strength solution was used to erase thick filaments in individual sarcomeres in real time before myofibril activation. The isometric forces were measured upon activation. The force produced by myofibrils with intact sarcomeres was significantly higher than the force produced by myofibrils with one or more sarcomeres lacking thick filaments (p < 0.0001) irrespective of the number of contractions imposed on the myofibrils and their initial sarcomere length. Our results suggest that the myofibril force is affected by intersarcomere dynamics and the number of active sarcomeres in series.

Impact of Mavacamten on Force Generation in Single Myofibrils from Rabbit Psoas and Human Cardiac Muscle

Impact of Mavacamten on Force Generation in Single Myofibrils from Rabbit Psoas and Human Cardiac Muscle

The relation between sarcomere energetics and the rate of isometric tension relaxation in healthy and diseased cardiac muscle

Full muscle relaxation happens when [Ca2+] falls below the threshold for force activation. Several experimental models, from whole muscle organs and intact muscle down to skinned fibers, have been used to explore the cascade of kinetic events leading to mechanical relaxation. The use of single myofibrils together with fast solution switching techniques, has provided new information about the role of cross-bridge (CB) dissociation in the time course of isometric force decay. Myofibril’s relaxation is biphasic starting with a slow seemingly linear phase, with a rate constant, slow kREL, followed by a fast mono-exponential phase. Sarcomeres remain isometric during the slow force decay that reflects CB detachment under isometric conditions while the final fast relaxation phase begins with a sudden give of few sarcomeres and is then dominated by intersarcomere dynamics. Based on a simple two-state model of the CB cycle, myofibril slow kREL represents the apparent forward rate with which CBs leave force generating states (gapp) under isometric conditions and correlates with the energy cost of tension generation (ATPase/tension ratio); in short slow kREL ~ gapp ~ tension cost. The validation of this relationship is obtained by simultaneously measuring maximal isometric force and ATP consumption in skinned myocardial strips that provide an unambiguous determination of the relation between contractile and energetic properties of the sarcomere. Thus, combining kinetic experiments in isolated myofibrils and mechanical and energetic measurements in multicellular cardiac strips, we are able to provide direct evidence for a positive linear correlation between myofibril isometric relaxation kinetics (slow kREL) and the energy cost of force production both measured in preparations from the same cardiac sample. This correlation remains true among different types of muscles with different ATPase activities and also when CB kinetics are altered by cardiomyopathy-related mutations. Sarcomeric mutations associated to hypertrophic cardiomyopathy (HCM), a primary cardiac disorder caused by mutations in genes encoding sarcomeric proteins, have been often found to accelerate CB turnover rate and increase the energy cost of myocardial contraction. Here we review data showing that faster CB detachment results in a proportional increase in the energetic cost of tension generation in heart samples from both HCM patients and mouse models of the disease.

Physiological Biomimetic Culture System for Pig and Human Heart Slices.

Preclinical testing of cardiotoxicity and efficacy of novel heart failure therapies faces a major limitation: the lack of an in situ culture system that emulates the complexity of human heart tissue and maintains viability and functionality for a prolonged time. To develop a reliable, easily reproducible, medium-throughput method to culture pig and human heart slices under physiological conditions for a prolonged period of time. Here, we describe a novel, medium-throughput biomimetic culture system that maintains viability and functionality of human and pig heart slices (300 µm thickness) for 6 days in culture. We optimized the medium and culture conditions with continuous electrical stimulation at 1.2 Hz and oxygenation of the medium. Functional viability of these slices over 6 days was confirmed by assessing their calcium homeostasis, twitch force generation, and response to β-adrenergic stimulation. Temporal transcriptome analysis using RNAseq at day 2, 6, and 10 in culture confirmed overall maintenance of normal gene expression for up to 6 days, while over 500 transcripts were differentially regulated after 10 days. Electron microscopy demonstrated intact mitochondria and Z-disc ultra-structures after 6 days in culture under our optimized conditions. This biomimetic culture system was successful in keeping human heart slices completely viable and functionally and structurally intact for 6 days in culture. We also used this system to demonstrate the effects of a novel gene therapy approach in human heart slices. Furthermore, this culture system enabled the assessment of contraction and relaxation kinetics on isolated single myofibrils from heart slices after culture. We have developed and optimized a reliable medium-throughput culture system for pig and human heart slices as a platform for testing the efficacy of novel heart failure therapeutics and reliable testing of cardiotoxicity in a 3-dimensional heart model.

On sarcomere length stability during isometric contractions before and after active stretching.

Sarcomere length (SL) instability and SL non-uniformity have been used to explain fundamental properties of skeletal muscles, such as creep, force depression following active muscle shortening and residual force enhancement following active stretching of muscles. Regarding residual force enhancement, it has been argued that active muscle stretching causes SL instability, thereby increasing SL non-uniformity. However, we recently showed that SL non-uniformity is not increased by active muscle stretching, but it remains unclear if SL stability is affected by active stretching. Here, we used single myofibrils of rabbit psoas muscle and measured SL non-uniformity and SL instability during isometric contractions and for isometric contractions following active stretching at average SLs corresponding to the descending limb of the force-length relationship. We defined isometric contractions as contractions during which mean SL remained constant. SL instability was quantified by the rate of change of individual SLs over the course of steady-state isometric force and SL non-uniformity was defined as deviations of SLs from the mean SL at an instant of time. We found that whereas the mean SL remained constant during isometric contraction, by definition, individual SLs did not. SLs were more stable in the force-enhanced, isometric state following active stretching compared with the isometric reference state. We also found that SL instability was not correlated with the rate of change of SL non-uniformity. Also, SL non-uniformity was not different in the isometric and the post-stretch isometric contractions. We conclude that since SL is more stable but similarly non-uniform in the force-enhanced compared with the corresponding isometric reference contraction, it appears unlikely that either SL instability or SL non-uniformity contribute to the residual force enhancement property of skeletal muscle.