Single-molecule Speckle Microscopy Research Articles

Force transmission by retrograde actin flow-induced dynamic molecular stretching of Talin

Force transmission at integrin-based adhesions is important for cell migration and mechanosensing. Talin is an essential focal adhesion (FA) protein that links F-actin to integrins. F-actin constantly moves on FAs, yet how Talin simultaneously maintains the connection to F-actin and transmits forces to integrins remains unclear. Here we show a critical role of dynamic Talin unfolding in force transmission. Using single-molecule speckle microscopy, we found that the majority of Talin are bound only to either F-actin or the substrate, whereas 4.1% of Talin is linked to both structures via elastic transient clutch. By reconstituting Talin knockdown cells with Talin chimeric mutants, in which the Talin rod subdomains are replaced with the stretchable β-spectrin repeats, we show that the stretchable property is critical for force transmission. Simulations suggest that unfolding of the Talin rod subdomains increases in the linkage duration and work at FAs. This study elucidates a force transmission mechanism, in which stochastic molecular stretching bridges two cellular structures moving at different speeds.

MTSS1 Regulation of Actin-Nucleating Formin DAAM1 in Dendritic Filopodia Determines Final Dendritic Configuration of Purkinje Cells

Dendritic filopodia of developing neurons function as environmental sensors, regulating the spatial organization of dendrites and proper targeting to presynaptic partners. Dendritic filopodia morphology is determined by the balance of F-actin assembled via two major nucleating pathways, the ARP2/3 complex and formins. The inverse-BAR protein MTSS1 is highly expressed in Purkinje cells (PCs) and has been shown to upregulate ARP2/3 activity. PCs in MTSS1 conditional knockout mice showed dendrite hypoplasia due to excessive contact-induced retraction during development. This phenotype was concomitant with elongated dendritic filopodia and was phenocopied by overactivation of the actin nucleator formin DAAM1 localized in the tips of PC dendritic protrusions. Cell biology assays including single-molecule speckle microscopy demonstrated that MTSS1's C terminus binds to DAAM1 and paused DAAM1-mediated F-actin polymerization. Thus, MTSS1 plays a dual role as a formin inhibitor and ARP2/3 activator in dendritic filopodia, determining final neuronal morphology.

Overview of Single-Molecule Speckle (SiMS) Microscopy and Its Electroporation-Based Version with Efficient Labeling and Improved Spatiotemporal Resolution

Live-cell single-molecule imaging was introduced more than a decade ago, and has provided critical information on remodeling of the actin cytoskeleton, the motion of plasma membrane proteins, and dynamics of molecular motor proteins. Actin remodeling has been the best target for this approach because actin and its associated proteins stop diffusing when assembled, allowing visualization of single-molecules of fluorescently-labeled proteins in a state specific manner. The approach based on this simple principle is called Single-Molecule Speckle (SiMS) microscopy. For instance, spatiotemporal regulation of actin polymerization and lifetime distribution of actin filaments can be monitored directly by tracking actin SiMS. In combination with fluorescently labeled probes of various actin regulators, SiMS microscopy has contributed to clarifying the processes underlying recycling, motion and remodeling of the live-cell actin network. Recently, we introduced an electroporation-based method called eSiMS microscopy, with high efficiency, easiness and improved spatiotemporal precision. In this review, we describe the application of live-cell single-molecule imaging to cellular actin dynamics and discuss the advantages of eSiMS microscopy over previous SiMS microscopy.

An Infrared Actin Probe for Deep-Cell Electroporation-Based Single-Molecule Speckle (eSiMS) Microscopy

Single-molecule speckle (SiMS) microscopy is a powerful method to directly elucidate biochemical reactions in live cells. However, since the signal from an individual fluorophore is extremely faint, the observation area by epi-fluorescence microscopy is restricted to the thin cell periphery to reduce autofluorescence, or only molecules near the plasma membrane are visualized by total internal reflection fluorescence (TIRF) microscopy. Here, we introduce a new actin probe labeled with near infrared (NIR) emissive CF680R dye for easy-to-use, electroporation-based SiMS microscopy (eSiMS) for deep-cell observation. CF680R-labeled actin (CF680R-actin) incorporated into actin structures and showed excellent brightness and photostability suitable for single-molecule imaging. Importantly, the intensity of autofluorescence with respect to SiMS brightness was reduced to approximately 13% compared to DyLight 550-labeled actin (DL550-actin). CF680R-actin enabled the monitoring of actin SiMS in actomyosin bundles associated with adherens junctions (AJs) located at 3.5–4 µm above the basal surfaces of epithelial monolayers. These favorable properties of CF680R-actin extend the application of eSiMS to actin turnover and flow analyses in deep cellular structures.

An easy-to-use single-molecule speckle microscopy enabling nanometer-scale flow and wide-range lifetime measurement of cellular actin filaments.

Single-molecule speckle (SiMS) microscopy has been a powerful method to analyze actin dynamics in live cells by tracking single molecule of fluorescently labeled actin. Recently we developed a new SiMS method, which is easy-to-use for inexperienced researchers and achieves high spatiotemporal resolution. In this method, actin labeled with fluorescent DyLight dye on lysines is employed as a probe. Electroporation-mediated delivery of DyLight-actin (DL-actin) into cells enables to label cells with 100% efficiency at the optimal density. DL-actin labels cellular actin filaments including formin-based structures with improved photostability and brightness compared to green fluorescent protein-actin. These favorable properties of DL-actin extend time window of the SiMS analysis. Furthermore, the new SiMS method enables nanometer-scale displacement analysis with a low localization error of ±8-8.5 nm. With these advantages, our new SiMS microscopy method will help researchers to investigate various actin remodeling processes. In this chapter, we introduce the methods for preparation of DL-actin probes, electroporation to deliver DL-actin, the SiMS imaging and data analysis.

New single-molecule speckle microscopy reveals modification of the retrograde actin flow by focal adhesions at nanometer scales

Speckle microscopy directly visualizes the retrograde actin flow, which is believed to promote cell-edge protrusion when linked to focal adhesions (FAs). However, it has been argued that, due to rapid actin turnover, the use of green fluorescent protein-actin, the lack of appropriate analysis algorithms, and technical difficulties, speckle microscopy does not necessarily report the flow velocities of entire actin populations. In this study, we developed a new, user-friendly single-molecule speckle (SiMS) microscopy using DyLight dye-labeled actin. Our new SiMS method enables in vivo nanometer-scale displacement analysis with a low localization error of ±8-8.5 nm, allowing accurate flow-velocity measurement for actin speckles with lifetime <5 s. In lamellipodia, both short- and long-lived F-actin molecules flow with the same speed, indicating they are part of a single actin network. These results do not support coexistence of F-actin populations with different flow speeds, which is referred to as the lamella hypothesis. Mature FAs, but not nascent adhesions, locally obstruct the retrograde flow. Interestingly, the actin flow in front of mature FAs is fast and biased toward FAs, suggesting that mature FAs attract the flow in front and actively remodel the local actin network.

F- and G-actin homeostasis regulates mechanosensitive actin nucleation by formins

Physical force evokes rearrangement of the actin cytoskeleton. Signalling pathways such as tyrosine kinases, stretch-activated Ca(2+) channels and Rho GTPases are involved in force sensing. However, how signals are transduced to actin assembly remains obscure. Here we show mechanosensitive actin polymerization by formins (formin homology proteins). Cells overexpressing mDia1 increased the amount of F-actin on release of cell tension. Fluorescence single-molecule speckle microscopy revealed rapid induction of processive actin assembly by mDia1 on cell cortex deformation. mDia1 lacking the Rho-binding domain and other formins exhibited mechanosensitive actin nucleation, suggesting Rho-independent activation. Mechanosensitive actin nucleation by mDia1 required neither Ca(2+) nor kinase signalling. Overexpressing LIM kinase abrogated the induction of processive mDia1. Furthermore, s-FDAPplus (sequential fluorescence decay after photoactivation) analysis revealed a rapid actin monomer increase on cell cortex deformation. Our direct visualization of the molecular behaviour reveals a mechanosensitive actin filament regeneration mechanism in which G-actin released by actin remodelling plays a pivotal role.

Turnover Dynamics of Diffuse Actin and Regulators At the Leading Edge

The lamellipodium at the leading edge of motile cells is a dynamic structure consisting of a dense network of branched actin filaments. These actin filaments polymerize in a region close to the leading edge and undergo retrograde flow towards the main body of the cell. A large number of experimental techniques have been used to monitor the structural aspects of actin networks at the leading edge. However, the role of concentration gradients and local heterogeneity of soluble actin, actin oligomers, and actin regulators in the crowded filament network is little explored. We combined single molecule fluorescence microscopy with image analysis and modeling to quantify the role of diffuse actin species and their gradients in actin reorganization at the leading edge of motile cells. Actin, capping protein, and Arp 2/3 complex, were marked with fluorescent probes at low concentrations and imaged at high spatiotemporal resolution in XTC fibroblasts. Particle tracking was used to mark the appearance and disappearance of bright spots that correspond to proteins becoming associated to, or dissociated from,the actin network. Image correlation analysis was used to quantify the motion of proteins in the cytoplasm. We developed conditional image correlation methods to study local dynamics prior to assembly and immediately following disassembly. From these data we create a map of the lamellipodium showing the dynamics of lamellipodium proteins and their turnover. Bounds on the fraction of actin that leaves the filament network as oligomers was determined by measuring the distribution of diffusion coefficients which correspond to different oligomer lengths. We used numerical simulations to model these turnover dynamics and to simulate FRAP experiments. These results help resolve apparenty disparities in measurements found through FRAP and single molecule speckle microscopy.

An Order of Magnitude Faster AIP1-Associated Actin Disruption than Nucleation by the Arp2/3 Complex in Lamellipodia

The mechanism of lamellipod actin turnover is still under debate. To clarify the intracellular behavior of the recently-identified actin disruption mechanism, we examined kinetics of AIP1 using fluorescent single-molecule speckle microscopy. AIP1 is thought to cap cofilin-generated actin barbed ends. Here we demonstrate a reduction in actin-associated AIP1 in lamellipodia of cells overexpressing LIM-kinase. Moreover, actin-associated AIP1 was rapidly abolished by jasplakinolide, which concurrently blocked the F-actin-cofilin interaction. Jasplakinolide also slowed dissociation of AIP1, which is analogous to the effect of this drug on capping protein. These findings provide in vivo evidence of the association of AIP1 with barbed ends generated by cofilin-catalyzed filament disruption. Single-molecule observation found distribution of F-actin-associated AIP1 throughout lamellipodia, and revealed even faster dissociation of AIP1 than capping protein. The estimated overall AIP1-associated actin disruption rate, 1.8 µM/s, was one order of magnitude faster than Arp2/3 complex-catalyzed actin nucleation in lamellipodia. This rate does not suffice the filament severing rate predicted in our previous high frequency filament severing-annealing hypothesis. Our data together with recent biochemical studies imply barbed end-preferred frequent filament disruption. Frequent generation of AIP1-associated barbed ends and subsequent release of AIP1 may be the mechanism that facilitates previously observed ubiquitous actin polymerization throughout lamellipodia.

Actin turnover–dependent fast dissociation of capping protein in the dendritic nucleation actin network: evidence of frequent filament severing

Actin forms the dendritic nucleation network and undergoes rapid polymerization-depolymerization cycles in lamellipodia. To elucidate the mechanism of actin disassembly, we characterized molecular kinetics of the major filament end-binding proteins Arp2/3 complex and capping protein (CP) using single-molecule speckle microscopy. We have determined the dissociation rates of Arp2/3 and CP as 0.048 and 0.58 s−1, respectively, in lamellipodia of live XTC fibroblasts. This CP dissociation rate is three orders of magnitude faster than in vitro. CP dissociates slower from actin stress fibers than from the lamellipodial actin network, suggesting that CP dissociation correlates with actin filament dynamics. We found that jasplakinolide, an actin depolymerization inhibitor, rapidly blocked the fast CP dissociation in cells. Consistently, the coexpression of LIM kinase prolonged CP speckle lifetime in lamellipodia. These results suggest that cofilin-mediated actin disassembly triggers CP dissociation from actin filaments. We predict that filament severing and end-to-end annealing might take place fairly frequently in the dendritic nucleation actin arrays.

Probing Actin Polymerization-Driven Cell Motility Machinery by Single-Molecule Imaging

Actin polymerization generates driving force for cell edge protrusion. Single-molecule speckle microscopy is a potent tool for probing association-dissociation kinetics of actin regulators with actin in living cells. The previous study of actin speckle analysis revealed the ceaseless actin filament turnover throughout lamellipodia of cultured fibroblasts. In order to understand how this fast actin filament lifetime is regulated, we are now extending application of single-molecule imaging to major actin end binding proteins. We also describe our discovery of processive actin capping by Formin-homology proteins, and discuss recent progress made on the mechanistic property and the structural feature of Formins’ interaction with the actin filament.