Single-layer Β-sheet Research Articles

β-Strand-mediated domain-swapping in the absence of hydrophobic core repacking

Domain swapping is a process wherein a portion of a protein is exchanged with its counterpart in another copy of the molecule, resulting in the formation of homo-oligomers with concomitant repacking of a hydrophobic core. Here, we report domain swapping triggered upon modifying a β-hairpin sequence within a single-layer β-sheet (SLB) of a model protein, OspA that did not involve the formation of a reorganized hydrophobic core. The replacement of two β-hairpin sequences with a Gly-Gly and shorteing of a β-hairpin resulted in a protein that formed two distinct crystal structures under similar conditions: one was monomeric, similar to the parental molecule, whereas the other was a domain-swapped dimer, mediated by an intermolecular β-sheet in the SLB portion. Based on the dimer interface structure, we replaced the Gly-Gly sequence with three-residue sequences that enable the formation of a consecutive intermolecular β-sheet, including the Cys-Thr-Cys sequence that formed a stable disulfide-linked dimer. These results provide new insights into protein folding, evolution, and the designability of protein structure.

Residue-Specific Binding Mechanisms of Thioflavin T to a Surface of Flat β-Sheets within a Peptide Self-Assembly Mimic

Thioflavin T (ThT) is a popular fluorescent dye for detecting amyloid, a protein aggregate with a β-sheet-rich structure that causes many neurodegenerative diseases. Despite the dye's popularity, a detailed understanding of its molecular binding mechanism remains elusive. We previously reported a protein model that can bind ThT on a single-layer β-sheet and revealed that a channel formed by aromatic rings with a confined length enhanced ThT binding. One of the mutants of the model system, 5-YY/LL, showed the highest affinity with a low micromolar dissociation constant. Here, we investigate the residue-specific mechanism of binding of ThT to 5-YY/LL. We introduced tyrosine to phenylalanine and tyrosine to histidine mutations into the channel. The mutants revealed that the fifth position of tyrosine (Y5) is important for binding of ThT. Positive charges introduced by histidine under a low-pH condition at the channel repel the binding of cationic ThT. Furthermore, we found a positive to negative conversion in the vicinity of the binding channel increases ThT fluorescence 4-fold. A detailed understanding of the ThT binding mechanism will enhance our ability to develop amyloid-specific small molecules.

Cooperative unfolding of a single-layer β-sheet protein, CPAP G-box

CPAP is a centriolar protein and its C-terminal domain, G-box or TCP, has a very unique structure that comprises a single-layer β-sheet without hydrophobic core packing. Here we characterized its biophysical properties, including its stability against chemical denaturation. Interestingly, upon urea-induced equilibrium unfolding, the CPAP G-box showed cooperative unfolding behavior that is the hallmark of globular proteins. We analyzed the m-value, a measure of the cooperative transition, from the urea-induced unfolding and found that the estimated m-value from surface burial upon folding is consistent with the experimental value, supporting the two-state unfolding. Next, we constructed deletion mutants of the terminal β-strands and found that the mutants showed reduced stability. The unique structure and characteristics of CPAP G-box provides an interesting opportunity to observe how the core-less flat β-sheet protein can be folded in solution.

Structures of single-layer β-sheet proteins evolved from β-hairpin repeats.

Free-standing single-layer β-sheets are extremely rare in naturally occurring proteins, even though β-sheet motifs are ubiquitous. Here we report the crystal structures of three homologous, single-layer, anti-parallel β-sheet proteins, comprised of three or four twisted β-hairpin repeats. The structures reveal that, in addition to the hydrogen bond network characteristic of β-sheets, additional hydrophobic interactions mediated by small clusters of residues adjacent to the turns likely play a significant role in the structural stability and compensate for the lack of a compact hydrophobic core. These structures enabled identification of a family of secreted proteins that are broadly distributed in bacteria from the human gut microbiome and are putatively involved in the metabolism of complex carbohydrates. A conserved surface patch, rich in solvent-exposed tyrosine residues, was identified on the concave surface of the β-sheet. These new modular single-layer β-sheet proteins may serve as a new model system for studying folding and design of β-rich proteins.

β-sheet elasticity of peptide self-assembly mimic, PSAM, with a grafted sequence characterized by comprehensive analyses of isomorphous crystals

Peptides and proteins are self-assembled into β-rich self-assemblies such as amyloids in liquid water environments. Despite its importance, detailed structural analysis of this class is hindered by their insoluble and heterogeneous nature. For circumventing this problem, we designed a peptide self-assembly mimic (PSAM) that consists of a central single-layer β-sheet (SLB) capped by terminal domains. In a previous study, we grafted part of an amyloid forming chameleon sequence into a PSAM (termed PSAM-VLGDV1) and found a β-sheet bending at SLB induced by the grafted sequence using x-ray crystallography (Hori et al., 2019 [1]). Later, we found that another crystal structure of PSAM-VLGDV1 obtained from an isomorphous crystal had a different conformation and we gained an interest in the structural differences of PSAMs within isomorphous crystals. Herein, we report the structural variations trapped within isomorphous crystals by comprehensive structure determinations. Additionally, we demonstrate the structural plasticity of PSAM-VLGDV1 via molecular dynamics simulations. Hydration structure analysis revealed that water molecule locates on the β-sheet surface is important for its plasticity. Our findings suggest that a marginal structural difference can be trapped at the time of crystal core formation, which propagates during crystal growth. Our results suggest that structural plasticity of β-sheet would play an important role in the macroscopic shape formation of peptide self-assemblies.

An Overlapping Region between the Two Terminal Folding Units of the Outer Surface Protein A (OspA) Controls Its Folding Behavior

Although many naturally occurring proteins consist of multiple domains, most studies on protein folding to date deal with single-domain proteins or isolated domains of multi-domain proteins. Studies of multi-domain protein folding are required for further advancing our understanding of protein folding mechanisms. Borrelia outer surface protein A (OspA) is a β-rich two-domain protein, in which two globular domains are connected by a rigid and stable single-layer β-sheet. Thus, OspA is particularly suited as a model system for studying the interplays of domains in protein folding. Here, we studied the equilibria and kinetics of the urea-induced folding–unfolding reactions of OspA probed with tryptophan fluorescence and ultraviolet circular dichroism. Global analysis of the experimental data revealed compelling lines of evidence for accumulation of an on-pathway intermediate during kinetic refolding and for the identity between the kinetic intermediate and a previously described equilibrium unfolding intermediate. The results suggest that the intermediate has the fully native structure in the N-terminal domain and the single layer β-sheet, with the C-terminal domain still unfolded. The observation of the productive on-pathway folding intermediate clearly indicates substantial interactions between the two domains mediated by the single-layer β-sheet. We propose that a rigid and stable intervening region between two domains creates an overlap between two folding units and can energetically couple their folding reactions.

Analysis of O2-binding Sites in Proteins Using Gas-Pressure NMR Spectroscopy: Outer Surface Protein A

Internal cavities in proteins produce conformational fluctuations and enable the binding of small ligands. Here, we report a NMR analysis of O2-binding sites by O2-induced paramagnetic relaxation enhancements (PREs) on amide groups of proteins in solution. Outer surface protein A contains a nonglobular single-layer β-sheet that connects the N- and C-terminal globular domains. Several cavities have been observed in both domains of the crystallized protein structure. The receptor-binding sites are occluded and line the largest cavity of the C-terminal domain. We observed significant O2-induced PREs for amide protons located around the largest cavity and at the central β-sheet. We suggested three potential O2-accessible sites in the protein based on the 1/r6 distance dependence of the PRE. Two sites were in or close to the largest cavity and the third site was in the surface crevice of the central β-sheet. These results provide, to our knowledge, the first evidence of ligand binding to the surface crevice and cavity of the protein in solution. Because O2 generally binds more specifically to hydrophobic rather than hydrophilic cavities within a protein, the results also indicated that the receptor-binding sites lining the largest cavity were in the hydrophobic environment in the ground-state conformation. Molecular dynamics simulations permitted the visualization of the rotational and translational motions of O2 within the largest cavity, egress of O2 from the cavity, and ingress of O2 in the surface crevice of the β-sheet. These molecular dynamics simulation results qualitatively explained the O2-induced changes in NMR observations. Exploring cavities that are sufficiently dynamic to enable access by small molecules can be a useful strategy for the design of stable proteins and their ligands.

The Role of CagA in the Gastric Biology of Helicobacter pylori.

See related article by Blaser et al., [Cancer Res 1995;55:2111–5][1] . Visit the Cancer Research 75th Anniversary [timeline][2]. Helicobacter pylori (H. pylori) was discovered in 1983 by the Australian scientists Warren and Marshall as a gastric pathogen, causing peptic ulcer disease. In 2005,

Aromatic cluster mutations produce focal modulations of β-sheet structure.

Site-directed mutagenesis is a powerful tool for altering the structure and function of proteins in a focused manner. Here, we examined how a model β-sheet protein could be tuned by mutation of numerous surface-exposed residues to aromatic amino acids. We designed these aromatic side chain "clusters" at highly solvent-exposed positions in the flat, single-layer β-sheet of Borrelia outer surface protein A (OspA). This unusual β-sheet scaffold allows us to interrogate the effects of these mutations in the context of well-defined structure but in the absence of the strong scaffolding effects of globular protein architecture. We anticipated that the introduction of a cluster of aromatic amino acid residues on the β-sheet surface would result in large conformational changes and/or stabilization and thereby provide new means of controlling the properties of β-sheets. Surprisingly, X-ray crystal structures revealed that the introduction of aromatic clusters produced only subtle conformational changes in the OspA β-sheet. Additionally, despite burying a large degree of hydrophobic surface area, the aromatic cluster mutants were slightly less stable than the wild-type scaffold. These results thereby demonstrate that the introduction of aromatic cluster mutations can serve as a means for subtly modulating β-sheet conformation in protein design.

Structural insights into Helicobacter pylori oncoprotein CagA interaction with β1 integrin

Infection with the gastric pathogen Helicobacter pylori is a risk factor for the development of gastric cancer. Pathogenic strains of H. pylori carry a type IV secretion system (T4SS) responsible for the injection of the oncoprotein CagA into host cells. H. pylori and its cag-T4SS exploit α5β1 integrin as a receptor for CagA translocation. Injected CagA localizes to the inner leaflet of the host cell membrane, where it hijacks host cell signaling and induces cytoskeleton reorganization. Here we describe the crystal structure of the N-terminal ~100-kDa subdomain of CagA at 3.6 Å that unveils a unique combination of folds. The core domain of the protein consists of an extended single-layer β-sheet stabilized by two independent helical subdomains. The core is followed by a long helix that forms a four-helix helical bundle with the C-terminal domain. Mapping of conserved regions in a set of CagA sequences identified four conserved surface-exposed patches (CSP1-4), which represent putative hot-spots for protein-protein interactions. The proximal part of the single-layer β-sheet, covering CSP4, is involved in specific binding of CagA to the β1 integrin, as determined by yeast two-hybrid and in vivo competition assays in H. pylori cell-culture infection studies. These data provide a structural basis for the first step of CagA internalization into host cells and suggest that CagA uses a previously undescribed mechanism to bind β1 integrin to mediate its own translocation.

Binding Modes of Thioflavin-T to the Single-Layer β-Sheet of the Peptide Self-Assembly Mimics

Although the amyloid dye thioflavin-T (ThT) is among the most widely used tools in the study of amyloid fibrils, the mechanism by which ThT binds to fibrils and other β-rich peptide self-assemblies remains elusive. The development of the water-soluble peptide self-assembly mimic (PSAM) system has provided a set of ideal model proteins for experimentally exploring the properties and minimal dye-binding requirements of amyloid fibrils. PSAMs consist of a single-layer β-sheet (SLB) capped by two globular domains, which capture the flat, extended β-sheet features common among fibril-like surfaces. Recently, a PSAM that binds to ThT with amyloid-like affinity (low micromolar Kd) has been designed, and its crystal structure in the absence of bound ThT was determined. This PSAM thus provides a unique opportunity to examine the interactions of ThT with a β-rich structure. Here, we present molecular dynamics simulations of the binding of ThT to this PSAM β-sheet. We show that the primary binding site for ThT is along a shallow groove formed by adjacent Tyr and Leu residues on the β-sheet surface. These simulations provide an atomic-scale rationale for this PSAM's experimentally determined dye-binding properties. Together, our results suggest that an aromatic–hydrophobic groove spanning across four consecutive β-strands represents a minimal ThT binding site on amyloid fibrils. Grooves formed by aromatic–hydrophobic residues on amyloid fibril surfaces may therefore offer a generic mode of recognition for amyloid dyes.

High-Resolution Structure of a Self-Assembly-Competent Form of a Hydrophobic Peptide Captured in a Soluble β-Sheet Scaffold

β-Rich self-assembly is a major structural class of polypeptides, but still little is known about its atomic structures and biophysical properties. Major impediments for structural and biophysical studies of peptide self-assemblies include their insolubility and heterogeneous composition. We have developed a model system, termed peptide self-assembly mimic (PSAM), based on the single-layer β-sheet of Borrelia outer surface protein A. PSAM allows for the capture of a defined number of self-assembly-like peptide repeats within a water-soluble protein, making structural and energetic studies possible. In this work, we extend our PSAM approach to a highly hydrophobic peptide sequence. We show that a penta-Ile peptide (Ile5), which is insoluble and forms β-rich self-assemblies in aqueous solution, can be captured within the PSAM scaffold in a form capable of self-assembly. The 1.1-Å crystal structure revealed that the Ile5 stretch forms a highly regular β-strand within this flat β-sheet. Self-assembly models built with multiple copies of the crystal structure of the Ile5 peptide segment showed no steric conflict, indicating that this conformation represents an assembly-competent form. The PSAM retained high conformational stability, suggesting that the flat β-strand of the Ile5 stretch primed for self-assembly is a low-energy conformation of the Ile5 stretch and rationalizing its high propensity for self-assembly. The ability of the PSAM to “solubilize” an otherwise insoluble peptide stretch suggests the potential of the PSAM approach to the characterization of self-assembling peptides.

Embryonic Neural Inducing Factor Churchill Is not a DNA-binding Zinc Finger Protein: Solution Structure Reveals a Solvent-exposed β-Sheet and Zinc Binuclear Cluster

Churchill is a zinc-containing protein that is involved in neural induction during embryogenesis. At the time of its discovery, it was thought on the basis of sequence alignment to contain two zinc fingers of the C 4 type. Further, binding of an N-terminal GST-Churchill fusion protein to a particular DNA sequence was demonstrated by immunoprecipitation selection assay, suggesting that Churchill may function as a transcriptional regulator by sequence-specific DNA binding. We show by NMR solution structure determination that, far from containing canonical C 4 zinc fingers, the protein contains three bound zinc ions in novel coordination sites, including an unusual binuclear zinc cluster. The secondary structure of Churchill is also unusual, consisting of a highly solvent-exposed single-layer β-sheet. Hydrogen-deuterium exchange and backbone relaxation measurements reveal that Churchill is unusually dynamic on a number of time scales, with the exception of regions surrounding the zinc coordinating sites, which serve to stabilize the otherwise unstructured N terminus and the single-layer β-sheet. No binding of Churchill to the previously identified DNA sequence could be detected, and extensive searches using DNA sequence selection techniques could find no other DNA sequence that was bound by Churchill. Since the N-terminal amino acids of Churchill form part of the zinc-binding motif, the addition of a fusion protein at the N terminus causes loss of zinc and unfolding of Churchill. This observation most likely explains the published DNA-binding results, which would arise due to non-specific interaction of the unfolded protein in the immunoprecipitation selection assay. Since Churchill does not appear to bind DNA, we suggest that it may function in embryogenesis as a protein-interaction factor.

Hydrophobic Surface Burial Is the Major Stability Determinant of a Flat, Single-layer β-Sheet

Formation of a flat β-sheet is a fundamental event in β-sheet-mediated protein self-assembly. To investigate the contributions of various factors to the stability of flat β-sheets, we performed extensive alanine-scanning mutagenesis experiments on the single-layer β-sheet segment of Borrelia outer surface protein A (OspA). This β-sheet segment consists of β-strands with highly regular geometries that can serve as a building block for self-assembly. Our Ala-scanning approach is distinct from the conventional host-guest method, in that it introduces only conservative, truncation mutations that should minimize structural perturbation. Our results showed very weak correlation with experimental β-sheet propensity scales, statistical β-sheet propensity scales, or cross-strand pairwise correlations. In contrast, our data showed strong positive correlation with the change in buried non-polar surface area. Polar interactions including prominent Glu-Lys cross-strand pairs contribute marginally to the β-sheet stability. These results were corroborated by results from additional non-Ala mutations. Taken together, these results demonstrate the dominant contribution of non-polar surface burial to flat β-sheet stability even at solvent-exposed positions. The OspA single-layer β-sheet achieves efficient hydrophobic surface burial without forming a hydrophobic core by a strategic placement of a variety of side-chains. These findings further suggest the importance of hydrophobic interactions within a β-sheet layer in peptide self-assembly.

Structure-based Design of a Second-generation Lyme Disease Vaccine Based on a C-terminal Fragment of Borrelia burgdorferi OspA

Here, we describe a structure-based approach to reduce the size of an antigen protein for a subunit vaccine. Our method consists of (i) determining the three-dimensional structure of an antigen, (ii) identifying protective epitopes, (iii) generation of an antigen fragment that contains the protective epitope, and (iv) rational design to compensate for destabilization caused by truncation. Using this approach we have successfully developed a second-generation Lyme disease vaccine. Outer surface protein A (OspA) from the Lyme disease spirochete Borrelia burgdorferi elicits protective immunity that blocks transmission of Borrelia from the tick vector to the vaccinated animal, and thus has been a focus of vaccine development. OspA has two globular domains that are connected via a unique single-layer beta-sheet. All anti-OspA monoclonal antibodies that block Borrelia transmission bind to conformational epitopes in the C-terminal domain of OspA, suggesting the possibility of using the C-terminal domain alone as a recombinant protein-based vaccine. The removal of ineffective parts from the OspA antigen may reduce side effects and lead to a safer vaccine. We prepared a C-terminal fragment of OspA by removing approximately 45% of residues from the N terminus. Although the fragment retained the native conformation and affinity to a protective antibody, its vaccine efficacy and conformational stability were significantly reduced with respect to full-length OspA. We successfully stabilized the fragment by replacing amino acid residues involved in buried salt-bridges with residues promoting hydrophobic interactions. The mutations promoted the vaccine efficacy of the redesigned fragment to a level comparable to that of the full-length protein, demonstrating the importance of the antigen stability for OspA's vaccine efficacy. Our strategy should be useful for further refining OspA-based vaccines and developing recombinant vaccines for other diseases.

3P109 単層βシートに基づく安定なβシートペプチドのデザイン(蛋白質 F) 蛋白質工学/進化工学)

3P109 単層βシートに基づく安定なβシートペプチドのデザイン(蛋白質 F) 蛋白質工学/進化工学)

単層シートを基としたβ-sheet構造を持つペプチドのデザイン

単層シートを基としたβ-sheet構造を持つペプチドのデザイン

Backbone Dynamics and Thermodynamics of Borrelia Outer Surface Protein A

Nuclear spin relaxation experiments performed at 298 K, 308 K and 318 K are used to characterize the intramolecular dynamics and thermodynamics of outer surface protein A (OspA), a key protein in the life-cycle of Borrelia burgdorferi, the causative agent of Lyme disease. It has recently been demonstrated that OspA specifically binds to the gut of the intermediate tick host ( Ixodes scapularis), and that this interaction is mediated, at least in part, by residues in the C-terminal domain of OspA that are largely inaccessible to solvent in all X-ray structures of this protein. Our analysis of 15N relaxation parameters in OspA shows that the putative-binding region contains and is surrounded by flexible residues, which could facilitate accessibility to solvent and ligands. In addition, residues with similar activation energies are clustered in a manner that suggests locally collective motions. We have used molecular modeling to show that these collective motions are consistent with a hinge-bending mechanism that exposes residues implicated in binding. Characteristic temperatures describing the energy landscape of the OspA backbone are derived from the temperature dependence of the N–H bond vector order parameters, and a comparison is made between the N and C-terminal globular domains and the unusual single-layer β-sheet connecting them. The average characteristic temperatures in the three regions indicate that, with an increase in temperature, a larger increase in accessible conformational states occurs for N–H bond vectors in the single-layer central β-sheet than for bond vectors in the globular N and C-terminal domains. These conformational states are accessible without disruption of hydrogen bonds, providing a conformational entropic gain, upon increase in temperature, without a significant enthalpic penalty. This increase in heat capacity may help to explain the unexpected thermal stability of the unusual single-layer β-sheet.

Calorimetric dissection of thermal unfolding of OspA, a predominantly beta-sheet protein containing a single-layer beta-sheet.

Outer surface protein A (OspA) from Borrelia burgdorferi is a predominantly beta-sheet protein comprised of beta-strands beta1-beta21 and a short C-terminal alpha-helix. It contains two globular domains (N and C-terminal domains) and a unique single-layer beta-sheet (central beta-sheet) that connects the two domains. OspA contains an unusually large number of charged amino acid residues. To understand the mechanism of stabilization of this unique beta-sheet protein, thorough thermodynamic investigations of OspA and its truncated mutant lacking a part of the C-terminal domain were conducted using calorimetry and circular dichroism. The stability of OspA was found to be sensitive to pH and salt concentration. The heat capacity curve clearly consisted of two components, and all the thermodynamic parameters were obtained for each step. The thermodynamic parameters associated with the two transitions are consistent with a previously proposed model, in which the first transition corresponds to the unfolding of the C-terminal domain and the last two beta-strands of the central beta-sheet, and the second transition corresponds to that of the N-terminal domain and the first beta-strand of the central beta-sheet in the second peak. The ratio of calorimetric and van't Hoff enthalpies indicates that the first peak includes another thermodynamic intermediate state. Large heat capacity changes were observed for both transitions, indicative of large changes in the exposure of hydrophobic surfaces associated with the transitions. This observation demonstrates that hydrophobic parts are buried efficiently in the native structure in spite of the low content of hydrophobic residues in OspA. By decomposing the enthalpy, entropy, and Gibbs free energy into contributions from different interactions, we found that the enthalpy changes for hydrogen bonding and polar interactions are exceptionally large, indicating that OspA maintains its stability by making full use of its unique beta-sheet and high content of polar residues. These thermodynamic analyses demonstrated that it is possible to maintain protein tertiary structure by making effective use of an unusual amino acid composition.

Thermodynamic and kinetic exploration of the energy landscape of Borrelia burgdorferi OspA by native-state hydrogen exchange.

We report a native-state hydrogen-exchange (HX) method to simultaneously obtain both thermodynamic and kinetic information on the formation of multiple excited states in a folding energy landscape. Our method exploits the inherent dispersion and pH dependence of the intrinsic HX rates to cover both the EX2 (thermodynamic) and EX1 (kinetic) regimes. At each concentration of denaturant, HX measurements are performed over a range of pH values. Using this strategy, we dissected Borrelia burgdorferi OspA, a predominantly beta-sheet protein containing a unique single-layer beta-sheet, into five cooperative units and postulated excited states predominantly responsible for HX. More importantly, we determined the interconversion rates between these excited states and the native state. The use of both thermodynamic and kinetic information from native-state HX enabled us to construct a folding landscape of this 28kDa protein, including local minima and maxima, and to discriminate on-pathway and off-pathway intermediates. This method, which we term EX2/EX1 HX, should be a powerful tool for characterizing the complex folding mechanisms exhibited by the majority of proteins.