Single Inertial Measurement Unit Research Articles

A Triangular Structure Constraint for Pedestrian Positioning with Inertial Sensors Mounted on Foot and Shank

To suppress pedestrian positioning drift, a velocity constraint commonly known as zero-velocity update (ZUPT) is widely used. However, it cannot correct the error in the non-zero velocity interval (non-ZVI) or observe heading errors. In addition, the positioning accuracy will be further affected when a velocity error occurs in the ZVI (e.g., foot tremble). In this study, the foot, ankle, and shank were regarded as a triangular structure. Consequently, an angle constraint was established by utilizing the sum of the internal angles. Moreover, in contrast to the traditional ZUPT algorithm, a velocity constraint method combined with Coriolis theorem was constructed. Magnetometer measurements were used to correct heading. Three groups of experiments with different trajectories were carried out. The ZUPT method of the single inertial measurement unit (IMU) and the distance constraint method of dual IMUs were employed for comparisons. The experimental results showed that the proposed method had high accuracy in positioning. Furthermore, the constraints built by the lower limb structure were applied to the whole gait cycle (ZVI and non-ZVI).

Accurate detection of gait events using neural networks and IMU data mimicking real-world smartphone usage

Wearable technologies such as inertial measurement units (IMUs) can be used to evaluate human gait and improve mobility, but sensor fixation is still a limitation that needs to be addressed. Therefore, aim of this study was to create a machine learning algorithm to predict gait events using a single IMU mimicking the carrying of a smartphone. Fifty-two healthy adults (35 males/17 females) walked on a treadmill at various speeds while carrying a surrogate smartphone in the right hand, front right trouser pocket, and right jacket pocket. Ground-truth gait events (e.g. heel strikes and toe-offs) were determined bilaterally using a gold standard optical motion capture system. The tri-dimensional accelerometer and gyroscope data were segmented in 20-ms windows, which were labelled as containing or not the gait events. A long-short term memory neural network (LSTM-NN) was used to classify the 20-ms windows as containing the heel strike or toe-off for the right or left legs, using 80% of the data for training and 20% of the data for testing. The results demonstrated an overall accuracy of 92% across all phone positions and walking speeds, with a slightly higher accuracy for the right-side predictions (∼94%) when compared to the left side (∼91%). Moreover, we found a median time error <3% of the gait cycle duration across all speeds and positions (∼77 ms). Our results represent a promising first step towards using smartphones for remote gait analysis without requiring IMU fixation, but further research is needed to enhance generalizability and explore real-world deployment.

Minimum data sampling requirements for accurate detection of terrain-induced gait alterations change with mobile sensor position

Human gait is a key biomarker for health, independence and quality of life. Advances in wearable inertial sensor technologies have paved the way for out-of-the-lab human gait analysis, which is important for the assessment of mobility and balance in natural environments and has applications in multiple fields from healthcare to urban planning. Automatic recognition of the environment where walking takes place is a prerequisite for successful characterisation of terrain-induced gait alterations. A key question which remains unexplored in the field is how minimum data requirements for high terrain classification accuracy change depending on the sensor placement on the body. To address this question, we evaluate the changes in performance of five canonical machine learning classifiers by varying several data sampling parameters including sampling rate, segment length, and sensor configuration. Our analysis on two independent datasets clearly demonstrate that a single inertial measurement unit is sufficient to recognise terrain-induced gait alterations, accuracy and minimum data requirements vary with the device position on the body, and choosing correct data sampling parameters for each position can improve classification accuracy up to 40% or reduce data size by 16 times. Our findings highlight the need for adaptive data collection and processing algorithms for resource-efficient computing on mobile devices.

Real-Time Forward Head Posture Detection and Correction System Utilizing an Inertial Measurement Unit Sensor

Forward head posture (FHP) has become a prevailing health issue in modern society as people spend more time on computers and smartphones. FHP is a posture where the head is forward and the anterior and posterior curvatures of the lower cervical and upper thoracic spines are both, respectively, exaggerated. FHP is often associated with neck pain, bad static balance, and hunched shoulders or back. To prevent this, consciously maintaining good posture is important. Therefore, in this study, we propose a system that gives users real-time, accurate information about their neck posture, and it also encourages them to maintain a good posture. This inexpensive system utilizes a single inertial measurement unit sensor and a Raspberry Pi system to detect the changes in state that can progress to an FHP. It retrieves data from the sensor attached to the user’s cervical spine to indicate their real-time posture. In a real-world office environment experiment with ten male participants, the system accurately detected the transition to the FHP state for more than 10 s, with a delay of less than 0.5 s, and it also provided personalized feedback to encourage them to maintain good posture. All ten participants recognized that their average craniovertebral angle had to be increased after receiving visual alerts regarding their poor postures in real time. The results indicate that the system has potential for widespread applications.

Alterations In Gait Parameters During A Timed Ruck March Using A Single Inertial Measurement Unit

Alterations In Gait Parameters During A Timed Ruck March Using A Single Inertial Measurement Unit

Linear jerk variability evaluation in measurements of motor control trainability: Could kinematic variables encompass information about strength and dynamic balance?

As the natural conclusion of talent identification in sports, talent development is the process that involves improving biomechanical capacities and bio-motor abilities. The development progress can be objectively assessed and monitored through measurements of trainability. This study introduces a practical methodology to assess motor control as a trainable factor using kinematic data. The study focused on establishing the relationship between kinematic data and changes in muscle strength and dynamic balance. It illustrates how wearable technology can assess trainability during a functional training programme. Twenty-six female university students were selected and divided into intervention and control groups to investigate motor control trainability. The intervention group performed step aerobics exercises for 24 sessions. A single inertial measurement unit (IMU) mounted on S1 captured the oscillatory motion profiles of the centre of mass during these rhythmic exercises. Analysis revealed that the amplitude of linear jerk variability in different anatomical planes could reflect core and lower limb muscle strengthening caused by training. Furthermore, the results indicated that the dynamic balance adaptation to the changing tempo throughout the training programme was dictated primarily by step width. The mediolateral linear jerk variability reflected this adaptation. The minimum instrumentation approach proposed by this study could prove very practical for the talent development monitoring. The methodology illustrates how the recorded kinematic data from an appropriately placed single IMU could become an information-rich source for the coach to monitor, assess and quantify the trainee's progress during long-term athletic development.

Handrim Reaction Force and Moment Assessment Using a Minimal IMU Configuration and Non-Linear Modeling Approach during Manual Wheelchair Propulsion.

Manual wheelchair propulsion represents a repetitive and constraining task, which leads mainly to the development of joint injury in spinal cord-injured people. One of the main reasons is the load sustained by the shoulder joint during the propulsion cycle. Moreover, the load at the shoulder joint is highly correlated with the force and moment acting at the handrim level. The main objective of this study is related to the estimation of handrim reactions forces and moments during wheelchair propulsion using only a single inertial measurement unit per hand. Two approaches are proposed here: Firstly, a method of identification of a non-linear transfer function based on the Hammerstein-Wiener (HW) modeling approach was used. The latter represents a typical multi-input single output in a system engineering modeling approach. Secondly, a specific variant of recurrent neural network called BiLSTM is proposed to predict the time-series data of force and moments at the handrim level. Eleven subjects participated in this study in a linear propulsion protocol, while the forces and moments were measured by a dynamic platform. The two input signals were the linear acceleration as well the angular velocity of the wrist joint. The horizontal, vertical and sagittal moments were estimated by the two approaches. The mean average error (MAE) shows a value of 6.10 N and 4.30 N for the horizontal force for BiLSTM and HW, respectively. The results for the vertical direction show a MAE of 5.91 N and 7.59 N for BiLSTM and HW, respectively. Finally, the MAE for the sagittal moment varies from 0.96 Nm (BiLSTM) to 1.09 Nm for the HW model. The approaches seem similar with respect to the MAE and can be considered accurate knowing that the order of magnitude of the uncertainties of the dynamic platform was reported to be 2.2 N for the horizontal and vertical forces and 2.24 Nm for the sagittal moments. However, it should be noted that HW necessitates the knowledge of the average force and patterns of each subject, whereas the BiLSTM method do not involve the average patterns, which shows its superiority for time-series data prediction. The results provided in this study show the possibility of measuring dynamic forces acting at the handrim level during wheelchair manual propulsion in ecological environments.

A Statistical Approach for Functional Reach-to-Grasp Segmentation Using a Single Inertial Measurement Unit.

The aim of this contribution is to present a segmentation method for the identification of voluntary movements from inertial data acquired through a single inertial measurement unit placed on the subject's wrist. Inertial data were recorded from 25 healthy subjects while performing 75 consecutive reach-to-grasp movements. The approach herein presented, called DynAMoS, is based on an adaptive thresholding step on the angular velocity norm, followed by a statistics-based post-processing on the movement duration distribution. Post-processing aims at reducing the number of erroneous transitions in the movement segmentation. We assessed the segmentation quality of this method using a stereophotogrammetric system as the gold standard. Two popular methods already presented in the literature were compared to DynAMoS in terms of the number of movements identified, onset and offset mean absolute errors, and movement duration. Moreover, we analyzed the sub-phase durations of the drinking movement to further characterize the task. The results show that the proposed method performs significantly better than the two state-of-the-art approaches (i.e., percentage of erroneous movements = 3%; onset and offset mean absolute error < 0.08 s), suggesting that DynAMoS could make more effective home monitoring applications for assessing the motion improvements of patients following domicile rehabilitation protocols.

Seasonal Comparison of Pre-Adolescent Soccer Players' Physical Performance Using an Objective Physical Test Battery.

Soccer is a multifactorial sport, requiring physical, psychological, technical, and tactical skills to succeed. Monitoring and comparing physical characteristics over time is essential to assess players' development, customize training, and prevent injury. The use of wearable sensors is essential to provide accurate and objective physical data. In this longitudinal study, 128 male adolescent soccer players (from Under 12 to Under 19) were evaluated at two time points (pre- and post-season). Participants completed the Euleria Lab test battery, including stability, countermovement and consecutive jumps, agility, and quick feet tests. A single Inertial Measurement Unit sensor provided quantitative data on fifteen performance metrics. Percentage changes were compared to the Smallest Worthwhile Changes to assess significant changes over time. The results showed significant improvements in most variables, including a 19.7% increase in quick feet, 10.9% in stability, and 9.6% in countermovement jumps. In principal component analysis, we identified four principal components-strength-power, balance, speed-agility, and stiffness-that explained over 80% of the variance. These findings align with previous studies assessing seasonal changes in adolescent soccer players, showing that the proposed test battery seems to be adequate to highlight physical performance changes and provide coaches with meaningful data to customize training and reduce injury rates.

Automatic Detection of Fatigued Gait Patterns in Older Adults: An Intelligent Portable Device Integrating Force and Inertial Measurements with Machine Learning.

This study aimed to assess the feasibility of early detection of fatigued gait patterns for older adults through the development of a smart portable device. The smart device incorporated seven force sensors and a single inertial measurement unit (IMU) to measure regional plantar forces and foot kinematics. Data were collected from 18 older adults walking briskly on a treadmill for 60min. The optimal feature set for each recognition model was determined using forward sequential feature selection in a wrapper fashion through fivefold cross-validation. The recognition model was selected from four machine learning models through leave-one-subject-out cross-validation. Five selected characteristics that best represented the state of fatigue included impulse at the medial and lateral arches (increased, p = 0.002 and p < 0.001), contact angle and rotation range of angle in the sagittal plane (increased, p < 0.001), and the variability of the resultant swing angular acceleration (decreased, p < 0.001). The detection accuracy based on the dual signal source of IMU and plantar force was 99%, higher than the 95% accuracy based on the single source. The intelligent portable device demonstrated excellent generalization (ranging from 93 to 100%), real-time performance (2.79ms), and portability (32g). The proposed smart device can detect fatigue patterns with high precision and in real time. The application of this device possesses the potential to reduce the injury risk for older adults related to fatigue during gait.

Three-Dimensional Human Posture Recognition by Extremity Angle Estimation with Minimal IMU Sensor.

Recently, posture recognition technology has advanced rapidly. Herein, we present a novel posture angle calculation system utilizing a single inertial measurement unit and a spatial geometric equation to accurately identify the three-dimensional (3D) motion angles and postures of both the upper and lower limbs of the human body. This wearable system facilitates continuous monitoring of body movements without the spatial limitations or occlusion issues associated with camera-based methods. This posture-recognition system has many benefits. Providing precise posture change information helps users assess the accuracy of their movements, prevent sports injuries, and enhance sports performance. This system employs a single inertial sensor, coupled with a filtering mechanism, to calculate the sensor's trajectory and coordinates in 3D space. Subsequently, the spatial geometry equation devised herein accurately computed the joint angles for changing body postures. To validate its effectiveness, the joint angles estimated from the proposed system were compared with those from dual inertial sensors and image recognition technology. The joint angle discrepancies for this system were within 10° and 5° when compared with dual inertial sensors and image recognition technology, respectively. Such reliability and accuracy of the proposed angle estimation system make it a valuable reference for assessing joint angles.

Digital-analog hybrid control of an inverted pendulum robot based on memristor

Abstract Single inertial measurement unit sensor signals are inaccurate, and traditional digital processing systems with separate storage and computation architectures cannot directly handle analog sensor signals, leading to significant delays and high power consumption. In that case, the control capability for self-balancing robots has been limited. In this work, a three-terminal MoS2-based memristor device was fabricated and successfully integrated into a memristor-based hybrid control inverted pendulum robot system. This system achieved continuous multi-sensor analog data fusion computations and analog PD control computations by combining the least squares method and a gradient descent algorithm based on a reward mechanism in digital circuits to control the memristors dynamically. Additionally, simulation testing and real, inverted pendulum robot control confirmed the efficacy of its data fusion and the accuracy of its PD control. The comparative experiments demonstrated that the hybrid control system based on memristors was approximately 86.41 mJ lower than the digital system. This system holds significant importance for the processing of large-scale sensor data and robot control.

An Inertial-Based Wearable System for Monitoring Vital Signs during Sleep.

This study explores the feasibility of a wearable system to monitor vital signs during sleep. The system incorporates five inertial measurement units (IMUs) located on the waist, the arms, and the legs. To evaluate the performance of a novel framework, twenty-three participants underwent a sleep study, and vital signs, including respiratory rate (RR) and heart rate (HR), were monitored via polysomnography (PSG). The dataset comprises individuals with varying severity of sleep-disordered breathing (SDB). Using a single IMU sensor positioned at the waist, strong correlations of more than 0.95 with the PSG-derived vital signs were obtained. Low inter-participant mean absolute errors of about 0.66 breaths/min and 1.32 beats/min were achieved, for RR and HR, respectively. The percentage of data available for analysis, representing the time coverage, was 98.3% for RR estimation and 78.3% for HR estimation. Nevertheless, the fusion of data from IMUs positioned at the arms and legs enhanced the inter-participant time coverage of HR estimation by over 15%. These findings imply that the proposed methodology can be used for vital sign monitoring during sleep, paving the way for a comprehensive understanding of sleep quality in individuals with SDB.

EmoWear: Wearable Physiological and Motion Dataset for Emotion Recognition and Context Awareness

The EmoWear dataset provides a bridge to explore Emotion Recognition (ER) via Seismocardiography (SCG), the measurement of small cardio-respiratory induced vibrations on the chest wall through Inertial Measurement Units (IMUs). We recorded Accelerometer (ACC), Gyroscope (GYRO), Electrocardiography (ECG), Blood Volume Pulse (BVP), Respiration (RSP), Electrodermal Activity (EDA), and Skin Temperature (SKT) data from 49 participants who watched validated emotionally stimulating video clips. They self-assessed their emotional valence, arousal, and dominance, as well as extra questions about the video clips. Also, we asked the participants to walk, talk, and drink, so that researchers can detect gait, voice, and swallowing using the same IMU. We demonstrate the effectiveness of emotion stimulation with statistical methods and verify the quality of the collected signals through signal-to-noise ratio and correlation analysis. EmoWear can be used for ER via SCG, ER during gait, multi-modal ER, and the study of IMUs for context-awareness. Targeted contextual information include emotions, gait, voice activity, and drinking, all having the potential to be sensed via a single IMU.

Seven Things to Know About Exercise Classification With Inertial Sensing Wearables.

Exercise monitoring with low-cost wearables could improve the efficacy of remote physical-therapy prescriptions by tracking compliance and informing the delivery of tailored feedback. While a multitude of commercial wearables can detect activities of daily life, such as walking and running, they cannot accurately detect physical-therapy exercises. The goal of this study was to build open-source classifiers for remote physical-therapy monitoring and provide insight on how data collection choices may impact classifier performance. We trained and evaluated multi-class classifiers using data from 19 healthy adults who performed 37 exercises while wearing 10 inertial measurement units (IMUs) on the chest, pelvis, wrists, thighs, shanks, and feet. We investigated the effect of sensor density, location, type, sampling frequency, output granularity, feature engineering, and training-data size on exercise-classification performance. Exercise groups (n = 10) could be classified with 96% accuracy using a set of 10 IMUs and with 89% accuracy using a single pelvis-worn IMU. Multiple sensor modalities (i.e., accelerometers and gyroscopes), high sampling frequencies, and more data from the same population did not improve model performance, but in the future data from diverse populations and better feature engineering could. Given the growing demand for exercise monitoring systems, our sensitivity analyses, along with open-source tools and data, should reduce barriers for product developers, who are balancing accuracy with product formfactor, and increase transparency and trust in clinicians and patients.

Effects of static exercises on hip muscle fatigue and knee wobble assessed by surface electromyography and inertial measurement unit data

Hip muscle weakness can be a precursor to or a result of lower limb injuries. Assessment of hip muscle strength and muscle motor fatigue in the clinic is important for diagnosing and treating hip-related impairments. Muscle motor fatigue can be assessed with surface electromyography (sEMG), however sEMG requires specialized equipment and training. Inertial measurement units (IMUs) are wearable devices used to measure human motion, yet it remains unclear if they can be used as a low-cost alternative method to measure hip muscle fatigue. The goals of this work were to (1) identify which of five pre-selected exercises most consistently and effectively elicited muscle fatigue in the gluteus maximus, gluteus medius, and rectus femoris muscles and (2) determine the relationship between muscle fatigue using sEMG sensors and knee wobble using an IMU device. This work suggests that a wall sit and single leg knee raise activity fatigue the gluteus medius, gluteus maximus, and rectus femoris muscles most reliably (p < 0.05) and that the gluteus medius and gluteus maximus muscles were fatigued to a greater extent than the rectus femoris (p = 0.031 and p = 0.0023, respectively). Additionally, while acceleration data from a single IMU placed on the knee suggested that more knee wobble may be an indicator of muscle fatigue, this single IMU is not capable of reliably assessing fatigue level. These results suggest the wall sit activity could be used as simple, static exercise to elicit hip muscle fatigue in the clinic, and that assessment of knee wobble in addition to other IMU measures could potentially be used to infer muscle fatigue under controlled conditions. Future work examining the relationship between IMU data, muscle fatigue, and multi-limb dynamics should be explored to develop an accessible, low-cost, fast and standardized method to measure fatiguability of the hip muscles in the clinic.

Deep Learning Approach for Gait Detection for Precise Stimulation of FES to Correct Foot Drop

Automatic detection of foot lift is one of the most important events of Functional Electrical Stimulation (FES). The FES system is used for the correction of Foot Drop (FD). FD is a condition where a person is unable to lift their foot from the ground due to complications that may arise after a stroke or spinal cord injury. It is crucial to accurately detect the patient’s foot lift event when correcting FD through FES as the pulse should only be applied when the person lifts their foot. The FES system applies the electrical pulse based on the input of the foot-lift detection sensor. A conventional FES system employs a sensor that is affixed on the heel to detect the lifting of the foot, but the connecting cables make the patient uncomfortable. To address this problem, IMU (Inertial Measurement Unit)-based sensors have been used, but they have some disadvantages, such as false triggering, low accuracy, and calibration. In this paper, we have presented an algorithm for detecting foot-lift events with high accuracy using a single IMU sensor through the application of deep learning techniques. We have recorded data from 10 healthy people and 10 foot drop patients. We have implemented Artificial Neural Network (ANN), K-Nearest Neighbour (KNN), and Convolutional Neural Network (CNN) models on these data and compared the results of these three models. The proposed algorithm aims to improve the precision of stimulation in the FES system.

Error Compensation Method for Pedestrian Navigation System Based on Low-Cost Inertial Sensor Array.

In the pedestrian navigation system, researchers have reduced measurement errors and improved system navigation performance by fusing measurements from multiple low-cost inertial measurement unit (IMU) arrays. Unfortunately, the current data fusion methods for inertial sensor arrays ignore the system error compensation of individual IMUs and the correction of position information in the zero-velocity interval. Therefore, these methods cannot effectively reduce errors and improve accuracy. An error compensation method for pedestrian navigation systems based on a low-cost array of IMUs is proposed in this paper. The calibration method for multiple location-free IMUs is improved by using a sliding variance detector to segment the angular velocity magnitude into stationary and motion intervals, and each IMU is calibrated independently. Compensation is then applied to the velocity residuals in the zero-velocity interval after zero-velocity update (ZUPT). The experimental results show a significant improvement in the average noise performance of the calibrated IMU array, with a 3.01-fold increase in static noise performance. In the closed-loop walking experiment, the average horizontal position error of a single calibrated IMU is reduced by 27.52% compared to the uncalibrated IMU, while the calibrated IMU array shows a 2.98-fold reduction in average horizontal position error compared to a single calibrated IMU. After compensating for residual velocity, the average horizontal position error of a single IMU is reduced by 0.73 m, while that of the IMU array is reduced by 64.52%.

Assessing Angular Momentum, Kinetics, and Energetics of a Rigid Body Using a Single Inertial Measurement Unit

Assessing Angular Momentum, Kinetics, and Energetics of a Rigid Body Using a Single Inertial Measurement Unit

Differences in kinematic parameters during gait between the patients with knee osteoarthritis and healthy controls using an insole with a single inertial measurement unit: A case-control study

BackgroundAn inertial measurement unit is small and lightweight, allowing patient measurements without physical constraints. This study aimed to determine the differences in kinematic parameters during gait using an insole with a single inertial measurement unit in healthy controls and on both sides in patients with knee osteoarthritis. MethodsTwenty patients with knee osteoarthritis and 13 age-matched controls were included in this study. The participants walked at a self-selected speed and foot kinematics were measured during gait using an insole with a single inertial measurement unit. The right side of the healthy controls and both the affected and contralateral sides of patients with KOA were analyzed separately. FindingsThe foot extension angular velocity at toe-off was significantly reduced on the affected side than on the contralateral side (P < 0.001) and in healthy controls (P < 0.001). During the swing phase, foot posterior-anterior acceleration was significantly lower on the affected side than on the healthy controls (P = 0.005). Furthermore, despite a decrease in walking speed, foot superior-inferior acceleration at initial contact in patients was significantly lower on the contralateral side than in healthy controls (P = 0.0167), but not on the affected side (P = 0.344). InterpretationAn insole with a single inertial measurement unit can detect differences in foot kinematics during gait between healthy controls and patients with knee osteoarthritis. Our findings indicate that patients with knee osteoarthritis exhibit dysfunction of push-off at toe-off and shock absorption at initial contact on the affected side.