Single-crystal X-ray Structure Analysis Research Articles

Guest-Responsive Near-Infrared-Luminescent Metal-Organic Cage Organized by Porphyrin Dyes and Yb(III) Complexes.

Metal-organic cages (MOCs) with luminophores have significant advantages for the facile detection of specific molecules based on turn-on or turn-off luminescence changes induced by host-guest complexation. One important challenge is the development of turn-on-type near-infrared (NIR)-luminescent MOCs. In this study, we synthesized a novel MOC consisting of two porphyrin dyes linked by four Yb(III) complexes, which exhibit bimodal red and NIR fluorescence signals upon photoexcitation of the porphyrin π system. Single-crystal X-ray structural analysis and computational molecular modeling revealed that planar aromatic perfluorocarbons were intercalated into the MOC. The tight packing between the MOC and guests enhanced the NIR fluorescence of Yb(III) by suppressing energy transfer from the photoexcited porphyrin to oxygen molecules. Guest-responsive turn-on NIR fluorescence changes in an MOC were successfully demonstrated.

Synthesis of Benzo[e][1,4,3]oxathiazin-3-one 1-Oxides from NH-S-(2-Hydroxyaryl)sulfoximines.

Cyclizations of NH-S-(2-hydroxyaryl)sulfoximines with 1,1'-carbonyldiimidazol (CDI) give unprecedented benzo[e][1,4,3]oxathiazin-3-one 1-oxides in good yields. The standard synthetic protocol involves the use of DCE at an increased temperature for 16 h. Under mechanochemical conditions, a representative product was obtained without a solvent at ambient temperature in only 60 min. X-ray single-crystal structure analysis confirmed the molecular scaffold representing a three-dimensional heterocycle.

An Asymmetric Coumarin-Anthracene Conjugate as Efficient Fullerene-Free Acceptor for Organic Solar Cells.

Asymmetric wide-bandgap fullerene-free acceptors (FFAs) play a crucial role in organic solar cells (OSCs). Here, we designed and synthesized a simple asymmetric coumarin-anthracene conjugate named CA-CN with optical bandgap of 2.1 eV in a single-step condensation reaction. Single crystal X-ray structure analysis confirms various multiple intermolecular non-covalent interactions. The molecular orbital energy levels of CA-CN estimated from cyclic voltammetry were found to be suitable for its use as an acceptor for OSCs. Binary OSCs fabricated using CA-CN as acceptor and PTB7-Th as the donor achieve a power conversion efficiency (PCE) of 11.13%. We further demonstrate that the insertion of 20 wt% of CA-CN as a third component in ternary OSCs with PTB7-Th:DICTF as the host material achieved an impressive PCE of 14.91%, an improvement of ~43% compared to the PTB7-Th:DICTF binary device (10.38%). Importantly, the ternary blend enhances the absorption coverage from 400 to 800 nm and improves the morphology of the active layer. The findings highlight the efficacy of an asymmetric design approach for FFAs, which paves the way for developing high-efficiency OSCs at low cost.

Oxidovanadium(V) complexes with tridentate hydrazone ligands as oxygen atom transfer catalysts

Four isostructural oxovanadium(V) complexes with hydrazone ligands have been synthesised, characterised, and evaluated as epoxidation and sulfoxidation catalysts. The reactions between [VO(acac)2] (acac– = acetylacetonate) and H2Ln (n = 1–4), precursors for monoanionic tridentate hydrazone ligands, afford complexes formulated as [VO(Ln)(bzh)·MeOH] (1–4) when bidentate benzohydroxamic acid (Hbzh) is included as a co-ligand. Single crystal X-ray structure analyses showed that complexes 1–3 have a distorted octahedral coordination geometry with an O5N coordination environment. Cyclic voltammetry showed that all complexes undergo two quasi-irreversible reduction peaks and a single irreversible oxidation peak. The bonding in 1 has been investigated by electronic structure calculations, and these data are discussed with respect to the electrochemical results. Complexes 1–4 were tested as catalysts for the epoxidation of cis-cyclooctene at 50 °C and sulfoxidation of methyl-p-tolylsulfide at room temperature using tert-butyl hydroperoxide (tBuOOH) and aqueous H2O2 as the terminal oxidants.

In vitro and in vivo antiproliferative activity on lung cancer of two acylhydrazone based zinc(II) complexes

Two acylhydrazone based zinc(II) complexes [Zn(HL)2Cl2(CH3OH)2] (Zn1) and [ZnL(AC)]2 (Zn2) were synthesized from 3-(1-(salicyloylhydrazono)ethyl) pyridine (HL). Single crystal X-ray structure analyses showed that complexes Zn1 and Zn2 have a zero-dimensional monomer or dimer structure. Antiproliferative activity studies revealed that Zn1 and Zn2 are both more effective against A549 cells than cisplatin. The results of the reactive oxygen species (ROS) generation assay on A549 cells showed that both Zn1 and Zn2 induced apoptosis through ROS accumulation. The apoptosis-inducing and cell cycle arrest effects of Zn1 and Zn2 on A549 cells indicated that the antitumor effect was achieved through apoptosis induction and inhibition of DNA synthesis by blocking the G0/G1 phase of the cell cycle. What’s more, the results of wound-healing assay showed that Zn1 and Zn2 could inhibit the migration of A549 cells. Western blot analysis further demonstrated that Zn1 and Zn2 induced cell apoptosis through the mitochondrial pathway, in which process, the expression level of cytochrome C, cleaved-PARP, cleaved-caspase 3 and cleaved-caspase 9 proteins increased while pro-caspase 3 and pro-caspase 9 expression decreased. In vivo anticancer evaluation demonstrated that both Zn1 and Zn2 complexes effectively inhibited tumor growth without causing significant toxicity in systemic organs.

Crystal structures of biogenic amine derivative Schiff bases, and these compounds modulatory effect on cell cycle arrest and cell death in lung cancer cells

Cancer continues to be a global health problem, and this problem requires the development of targeted anticancer agents. Syntheses of different derivatives of Schiff bases have attracted serious attention in cancer research due to the potential of this group of compounds as anticancer agents. For this purpose, the biogenic amine derivative Schiff bases (Schf 1–3) were synthesised. The solid-state structure and geometry of Schf-2 and Schf-3 were determined using single crystal X-ray structural analysis for the first time in this study. The isolated compounds were characterised by NMR (1H and 13C) spectroscopy, mass analysis, and single crystal X-ray crystallography. The cytotoxic activities of these compounds against lung cancer and normal lung cells were determined by the WST-8 assay. In addition, mRNA expression levels of cell death, cell cycle, and ER stress related genes were determined by qPCR. Besides, ER stress, apoptosis, and related signaling proteins were determined by ELISA. Moreover, necrosis, early and late apoptosis, and cell cycle were determined by Flow cytometry. The most effective % viability activity is Schf-1, and IC50 value are 60.22% (27.73 μM) (LogIC50:1.443) in A549 cells. All compounds increased in MAPK gene expressions, also, gene expressions of HSP27, HSP40, HSP60, HSP70, HSP90 and AKT decreased by these compounds in A549 cells. Moreover, GRP78, Caspase-3, p-AKT, and MAPK protein levels were upregulated by these compounds. Furthermore, cell cycle, necrosis, and apoptosis are regulated by these molecules. Our findings indicate that these compounds have potential properties that suppress HSP genes and activate ER stress related apoptotic cell death and are notable for drug-improving studies.

Dual-Channel Imine-Amine Photoisomerization in a Benzoimidazole and Benzothiazole Coupled System: Photophysics and Applications.

A molecule, namely 2-(1H-benzo[d]imidazol-2-yl)-6-(benzo[d]thiazol-2-yl)-4-bromophenol (BIBTB), having a two-way proton transfer unit of thiazole and imidazole moieties was synthesized and characterized by NMR, electrospray ionization mass spectrometry (ESI-MS), and single-crystal diffraction studies. Steady state and time-resolved spectral studies of BIBTB support excited state intramolecular proton transfer (ESIPT), causing imine-amine tautomerization through a two-way 6-membered H-bonded ring, where the N atoms of benzothiazole and the benzoimidazole unit are involved as proton acceptor sites. Interestingly, in a nonpolar and moderately polar solvent, photoisomerization in BIBTB is found to be favored toward the thiazole ring, whereas in a highly polar solvent, it is favored toward the imidazole ring. A spectral comparison of BIBTB with judicially designed molecules 2-(benzo[d]thiazol-2-yl)-4-bromophenol (HBT) and 2-(1H-benzo[d]imidazol-2-yl)-4-bromophenol (BIB) supports these inferences. Theoretical calculation using the Density Functional Theory (DFT) at CAM-B3LYP/6-311+G(d,p) level supports the existence of two low-energy 6-membered hydrogen-bonded planar conformers in the ground state in the gas phase and in solvents of different dielectrics. The potential energy curves (PECs) calculated along the proton transfer (PT) coordinate are found to have a high energy barrier in the ground state and to be barrierless or have a low energy barrier in the excited state for both the forms. The calculated vertical excitation and the emission energy from the relaxed excited and PT states show good correlation with the experimental spectral data. Aggregation of BIBTB in water with red shifted emission was established from X-ray single-crystal structure analysis, solid state emission, and Dynamic Light Scattering (DLS) measurement. The molecule BIBTB also acts as a fluorescence probe for sensing the explosive picric acid in the subnano scale and can be used to determine the proportion of water in dimethyl sulfoxide (DMSO) solvent.

Spin-Flip via Subtle Electronic Perturbation in Axially Ligated Diiron(III) Porphyrin Dimer.

Spin state switching in the metal center is a crucial phenomenon in many enzymatic reactions in biology. The spin state alteration, a critical step in cytochrome P450 catalysis, is driven most likely through a weak perturbation upon substrate binding in the enzyme, which is still not well clarified. In the current work, the spin state transition of iron(III) from high to intermediate via an admixed state is observed upon a subtle electronic perturbation to the sulphonate moieties coordinated axially to a diiron(III)porphyrin dimer. While electron-donating substituents stabilize the high-spin state of iron(III), strongly electron-withdrawing groups stabilize an intermediate-spin state, whereas the moderate electron-withdrawing nature of axial ligands resulted in an admixed state. Confirmation of the molecular structures and their spin states have been made utilizing single-crystal X-ray structure analysis, Mössbauer, magnetic, EPR, and 1H NMR spectroscopic investigations. The position of the signals of the porphyrin macrocycle in the paramagnetic 1H NMR is found to be very characteristic of the spin state of the iron center in solution. The Curie plot for the pure high-spin complexes shows the signals' temperature dependency in line with the Curie law. Conversely, the pure intermediate-spin state of iron exhibits an anti-Curie temperature dependence, whereas the admixed-spin state of iron displays significant curvature of the lines in the Curie plot. An extensive DFT analysis displays a linear dependence between the energy difference between d and d orbital versus Fe-Npor distance for the complexes reported here. Furthermore, a strong linear correlation between the Fe-O distance and the spin density over the oxygen atom, as well as the Fe-Npor distance for the complexes, has been observed. Thus, a slight electronic perturbation at the axial ligand of the diheme resulted in a large change in the electronic structures with a spin-flip. This is at par with the metalloenzymes, which employ minute perturbations around the periphery of the active sites, leading to spin state transitions.

Exploring the physicochemical properties of a new mixed halide 1D hybrid material Zn(C2H8N2)Br1.41Cl0.59 with a non-centrosymmetric structure: Promising material for nonlinear applications

Colorless crystals of a new mixed halide hybrid material, Zn(C2H8N2)Br1.41Cl0.59, were synthesized by the slow evaporation method at room temperature. The crystal structure, thermal behavior, and optical analysis were analyzed to characterize this complex. The crystal structure study revealed that this compound adopts the orthorhombic system and crystallizes in the non-centrosymmetric space group Ima2. Its one-dimensional structure is built from infinite wavy chains of [Zn(C2H8N2)Br1.41Cl0.59]n propagating along the crystallographic a-axis, which are interconnected through NH···Br/Cl hydrogen bonds. Thermogravimetric analysis indicated that this complex remains stable up 251 °C, decomposing in a single step to yield zinc oxide (ZnO) as final product. Differential scanning calorimetry (DSC) revealed an endothermic peak at 195 °C, indicating that the title compound undergoes a phase transition at this temperature. Additionally, the material's suitability for optical application was assessed through UV–Visible absorption and non-linear optical (NLO) techniques. The determined band gap energy of 4.5 eV suggests that this new complex can be classified as a semiconductor material closely resembling an insulator. Furthermore, the second harmonic generation (SHG) efficiency of the grown crystal was analyzed using the Kurtz-Perry powder technique. The IR and Raman spectra confirm the results obtained from X-ray single-crystal structural analyses.

Tl7]7- Clusters in Mixed Alkali Metal Thallides Cs7.29K5.71Tl13 and Cs3.45K3.55Tl7.

Investigations in the ternary system Cs-K-Tl resulted in the unexpected formation of new ternary thallides Cs7.29K5.71Tl13 and Cs3.45K3.55Tl7. Single crystal X-ray structure analyses of both compounds reveal the presence of isolated Tl cluster units. Cs7.29K5.71Tl13 crystallizes in the monoclinic space group C2/c (a = 30.7792(9) Å, b = 11.000(2) Å, c = 14.0291(4) Å, β = 112.676(4)°, Z = 4) and contains [Tl6]6- and [Tl7]7- clusters as thallium subunits. Cs3.45K3.55Tl7 crystallizes in the tetragonal space group I41/a (a = 13.6177(2) Å, c = 25.5573(8) Å, Z = 8) and contains [Tl7]7- clusters exclusively. The formation of Cs7.29K5.71Tl13 is obtained after slow cooling in addition to that of Cs3.45K3.55Tl7 and can be suppressed by quenching the stoichiometric mixture. First dissolution experiments in liquid ammonia suggest thallium and amide as final oxidation products. Full relativistic band structure calculations of Cs4K3Tl7 and Cs8K5Tl13 showed a (pseudo) band gap around EF for both compounds.

Hexakispyrazolylethane: New Strategy for Stabilization of Hexaarylethane.

Hexakis(4-trimethylsilylpyrazol-1-yl)ethane was synthesized by the oxidative dimerization of tris(4-trimethylsilylpyrazol-1-yl)methane. Single-crystal X-ray structural analysis of hexakis(4-trimethylsilylpyrazol-1-yl)ethane showed that the ethane C-C bond (1.623(4) Å) is shorter than that in hexaphenylethane (1.67(3) Å). In solution, hexakis(4-trimethylsilylpyrazol-1-yl)ethane existed as a single species, contrastive that conventional hexaphenylethanes can keep the central C-C bond only by the aid of additional bridges between the two triarylmethyl units. Theoretical calculations indicated that the tris(pyrazol-1-yl)methyl radical, which is anticipated to be under equilibrium with hexakis(pyrazol-1-yl)ethane, is less stable than trityl radicals due to lack of delocalization of the radicals. Furthermore, introduction of pyrazole groups allowed additional bridging between the two triarylmethyl moieties through metal coordination to the adjacent N atoms: hexakis(4-trimethylsilylpyrazol-1-yl)ethane exhibited unique coordination to three Ag atoms affording a hexaarylethane analog bearing three N-Ag-N bridges.

Tuning Reactivities of tert-Butyllithium by the Addition of Stoichiometric Amounts of Tetrahydrofuran.

In alkyllithium chemistry the highest reactivity has historically been linked to the smallest degree of aggregation possible. Since tert-butyllithium is known to form a monomer in tetrahydrofuran solution, using just stoichiometric amounts of the lewis base to selectively form a dimeric species seemed irrational. In this study, we showed a considerable increase of the reactivity of t-BuLi when using stoichiometric amounts of THF in the non-polar solvent n-pentane in order to enable the deprotonation of simple methyl silanes and other low C-H-acidic substrates. In this context, we were able to obtain the corresponding aggregates of t-BuLi with the ligand THF in suspension and as crystalline solids and investigate them by single crystal X-ray structural analysis, in situ FTIR spectroscopy and quantum chemical calculations. Furthermore, we were able to explain the enhanced reactivity of t-BuLi with stoichiometric amounts of THF on the basis of structural features of the bridged dimer obtained under these conditions. With these findings, we present a new target in the aggregation of alkyllithium reagents: the selectively formed "frustrated" aggregates!

Heterometallic AuI 6 AgI 6 Macrocyclic Cluster Templated by a Supramolecular Melamine Dimer.

The application of supramolecular templates in aligning atomically precise heterometal arrays is important for pursuing functional materials. Herein, we report that a bilayered supramolecular tri-deprotonated melamine dimer functions as an effective template in the construction of a heterometallic gold(I)-silver(I) macrocyclic cluster [μ6 -(C3 N6 H3 )3- ]2 -AuI 6 AgI 6 . X-ray single crystal structural analysis showed that a crown-like AuI 6 AgI 6 macrocycle is aligned around two parallelly stacked μ6 -(C3 N6 H3 )3- moieties hold together with π-π interactions. Theoretical calculations revealed that the [μ6 -(C3 N6 H3 )3- ]2 motif dominantly contributes to the near-occupied orbitals in the electronic structure, which is closely related to its luminescence properties. This work demonstrates that the supramolecular templates containing multiple symmetric binding sites may present a facile approach in the construction of functional metal clusters.

A Metal-Free Triazacoronene-Based Bimodal VOC Sensor.

Developing suitable sensors for selective and sensitive detection of volatile organic compounds (VOCs) is crucial for monitoring indoor and outdoor air quality. VOCs are very harmful to our health upon inhalation or contact. Bimodal sensor materials with more than one transduction capability (optical and electrical) offer the ability to extract complementary information from the individual analyte, thus improving detection accuracy and performance. The privilege of manipulating the optoelectronic properties of the polycyclic aromatic hydrocarbon-based semiconducting materials offers rapid signal transduction in multimodal sensing applications. A thiophene-functionalized triazacoronene (TTAC) donor-acceptor-donor (D-A-D) type sensor is reported here for VOC sensing. The single-crystal X-ray structure analysis of the TTAC revealed that a distinctive supramolecular polymer architecture was formed because of cooperative π-π and intermolecular D-A interactions and exhibited rapid signal transduction upon exposure to specific VOCs. The TTAC-embedded green luminescent paper-based test strip exhibited an on-off fluorescence response upon nitrobenzene vapor exposure for 120 s. The selective and rapid response is due to the fast photoinduced electron transfer, as is evident from the time-resolved excited-state dynamics and density functional theory studies. The thick-film-based prototype chemiresistive sensor detects harmful VOCs in a custom-made gas sensing system including benzene, toluene, and nitrobenzene. The TTAC sensor rapidly responds (200 s) at relatively low temperatures (180 οC) compared to other reported metal-oxide-based sensors.

Bimetallic nickel complexes containing imidazole-based phenolate ligands as efficient catalysts for the copolymerization of carbon dioxide with epoxides.

The utilization of hexadentate imidazole-derived diamine-bisphenolate ligands to construct structurally well-defined bimetallic nickel catalysts that enable the mediation of the copolymerization of carbon dioxide with alicyclic epoxides was reported for the first time. A series of dinickel carboxylate/nitrophenolate complexes were facilely prepared through a one-pot procedure and their structures were fully determined by single crystal X-ray structural analysis. Dinickel complexes 1-10 were used as single-component catalysts, and were evaluated for the copolymerization of CO2 and cyclohexene oxide (CHO), for which acetato-incorporated complex 1 was proved to exhibit the best activity. Not only has the controllability of binickel catalyst 1 for CO2/CHO copolymerization been demonstrated, but also an "immortal" character for the same polymerization has been realized. Furthermore, detailed kinetic studies of polymerization catalysis of this type were undertaken, and the kinetics results revealed a first-order dependence on both Ni complex 1 and CHO concentrations. This is a successful example of the introduction of the easily accessible nitrogen-heterocycle group, the imidazole moiety, into phenolate ligands for the development of high-performance homogeneous catalysts towards the bimetallic complex-catalyzed copolymerization of CO2 and epoxides.

Synthetic, structural and reactivity studies of a boryl-ethynyl Silylene.

The salt metathesis of a boryl-ethynyl lithium salt {[(HCDipN)2]B-CC-Li} with a monochlorosilylene [LSi(:)Cl; L = PhC(NtBu)2] produced an isolable boryl-ethynyl silylene {1; [(HCDipN)2]B-CC-Si(L)}. The Si(II) center in 1 possesses a nonbonding lone pair and forms a covalent bond with the ethynyl group. The characterization of 1 was carried out by multinuclear NMR spectroscopy, single-crystal X-ray structure analysis and DFT calculations. Additionally, a reactivity study of 1 was conducted towards oxygen-containing and aryl C-F substrates.

Photochromism of phenazine-2,3-diol derivatives through excited state intermolecular proton transfer based on keto-enol tautomerization.

Photochromism through excited-state intermolecular proton transfer (ESInterPT) processes based on keto-enol tautomerization was found in phenazine-2,3-diol PD1 and its monoalkoxy derivative PD2 in a glassy matrix at 77 K: the colorless solutions of enol forms PD1-E and PD2-E at 298 K transformed into orange-colored solutions of keto forms PD1-K and PD2-K upon photoirradiation (λ = 385 nm) at 77 K. Furthermore, this report is the first to achieve the single-crystal X-ray structural analyses of phenazine-2,3-diol PD1 and its monoalkoxy derivative PD2, since the report on the synthesis of PD1 70 years ago. Indeed, it was found that PD1 and PD2 molecules exist in the keto form (PD1-K) and the enol form (PD2-E), respectively, in the crystal, and the neighboring PD1-K and PD2-E molecules are linked by one-dimensional intermolecular NH⋯O and OH⋯N hydrogen bonding, respectively. The fact suggests strongly that for PD1 and PD2, the formation of continuous intermolecular hydrogen bonding in aggregates such as in a glassy matrix at 77 K is involved in the keto-enol tautomerization of phenazine-2,3-diol derivatives based on ESInterPT. More interestingly, the color and the photoabsorption spectrum of the solids obtained by sublimation of crystals of PD2-E are similar to those for the crystals of PD1-K, indicating that the PD2 molecule exists in the keto form (PD2-K) in the solid of the sublimate. Therefore, this study provides a valuable insight for a greater understanding of the keto-enol tautomerization of diazaacene-diol derivatives and their photophysical properties in the solution and in the solid state.

A dysprosium(III)-based triple helical-like complex as a turn-on/off fluorescence sensor for Al(III) and 4,5-dimethyl-2-nitroaniline.

A novel triple helical-like complex [Dy2K2L3(NO3)2]·3DMF (1) based on a designed Schiff base N'1,N'3-bis((E)-3-ethoxy-2-hydroxybenzylidene)-malonohydrazide (H4L) was synthesized with good chemical and thermal stabilities. Single-crystal X-ray structural analysis showed that 1 presents a tetranuclear triple helical-like structure via the coordination mode of Dy : K : L with 2 : 2 : 3 stoichiometry. Fluorescence measurements showed that 1@EtOH has excellent fluorescence turn-on/off response ability for aluminium ions and 4,5-dimethyl-2-nitroaniline (DMNA) with outstanding selectivity, sensitivity, and anti-interference ability. The calculated limit of detection (LOD) values for 1@EtOH to Al3+ and DMNA were found to be 0.53 and 3.33 μM, respectively. Density functional theory (DFT) calculation showed that the fluorescence response mechanism can be explained by the photoinduced electron transfer (PET) mechanism; meanwhile, the inner filter effect (IFE) of DMNA can also affect the emission of 1@EtOH.

Stereoselective synthesis of different cyclic tetrasiloxane isomers depending on the superacid catalyst employed.

In this study, we investigated the hydrolytic condensation of 3-aminopropyldiethoxymethylsilane over different superacid catalysts. We found that cyclic tetrasiloxanes with different stereostructures (Am-CyTS-NNf2 and Am-CyTS-NHf2) could be selectively prepared in high yields (>95%) depending on the superacid catalyst employed (bis(nonafluorobutanesulfonyl)imide or cyclohexafluoropropane-1,3-bis(sulfonyl)imide). The single-crystal X-ray structural analyses of compounds in which amino groups of Am-CyTS-NNf2 and Am-CyTS-NHf2 were protected by the tert-butoxycarbonyl group revealed the formation of all-cis and cis-trans-cis cyclic tetrasiloxanes, respectively.

A novel nickel(II) complex with N,S donor Schiff base: Structural characterisation, DFT, TD-DFT study and catalytic investigation.

One new mononuclear nickel(II) thiosemicarbazone complex (1), has been synthesised from the Schiff base ligand derived from p-anisaldehyde and thiosemicarbazide. Complex 1 is characterized by using different spectroscopic techniques and single crystal X-ray structure analysis. Time dependent density functional theory (TD-DFT) was performed to simulate the electronic spectra of the complex 1 with the help of Polarizable Continuum Model (PCM) model. Complex 1 acts as functional models. The catalytic property has been evaluated from Lineweaver-Burk plot using the Michaelis-Menten approach of enzyme catalysis with a kcat value of the order of 708 h-1.