Single Crystal Photo-elastic Modulator Research Articles

Influence of the retardation of the multiplexing element in a dual channel Q-switched laser

We present an experimental and numerical analysis, how deviations of the multiplexer-retardation influence the output power of a time-multiplexed dual channel laser. The laser has two different channels, each one with its own gain medium. The channels are time-multiplexed by a single crystal photo-elastic modulator. It enables to double the repetition rate and output power of the laser. However, as multiplexing is based on polarization-switching, the retardation of the modulator should be kept within certain limits. By experimental measurement and theoretical analysis, we determine the operational window within which the retardation should be kept to avoid additional losses into the resonator. The analysis was done for two configurations of the laser setup, namely with and without a quarter-wave plate.

SCPEM-Q-switching of a fiber-rod-laser

We demonstrate high-frequency Q-switching of a fiber rod laser with a Single-Crystal Photo-Elastic Modulator (SCPEM) made of a LiTaO₃₋ crystal. This type of photo-elastic modulator can be driven simultaneously with two different eigenmodes to achieve a shorter rise time, which is essential for high-power operation. When operated in the laser cavity, a pulse repetition frequency of 183.6 kHz with an average power of 47 W, a pulse duration of 26 ns, and a peak power of 10.5 kW was achieved.

Power scaling of AOM-switched lasers with SCPEM-based time-multiplexing

Power Scaling of a Q-switched laser designed for internal frequency conversion is demonstrated by combining two Nd:YVO4-gain-channels with a time-multiplexing scheme based on a single crystal photo elastic modulator (SCPEM). Both channels are coupled with a polarizer and share an output-coupler and acousto-optic modulator (AOM). In order to combine two channels by time multiplexing, the single crystal photo elastic modulator is used which switches between two channels, while the acousto-optic modulator conducts the Q-switching. This allows almost to double the average output power and repetition rate within a given laser resonator design.

Fast ellipsometric measurements based on a single crystal photo-elastic modulator

For quality control in high volume manufacturing of thin layers and for tracking of physical and chemical processes, ellipsometry is a common measurement technology. For such kinds of applications we present a novel approach of fast ellipsometric measurements. Instead of a conventional setup that uses a standard photo-elastic modulator, we use a 92 kHz Single Crystal Photo-Elastic Modulator (SCPEM), which is a LiTaO3 crystal with a size of 28 × 9 × 4 mm. This small, simple, and cost-effective solution also offers the advantage of direct control of the retardation via the current amplitude, which is important for repeatability of the measurements. Instead of a Lock-In Amplifier, an automated digital processing based on a fast analog to digital converter controlled by a highly flexible Field Programmable Gate Array is used. This and the extremely compact and efficient polarization modulation allow fast ellipsometric testing where the upper limit of measurement rates is mainly limited by the desired accuracy and repeatability of the measurements. The standard deviation that is related to the repeatability +/-0.002° for dielectric layers can be easily reached.

Q-switching of a fiber laser with a single crystal photo-elastic modulator

A study of using a single crystal photo-elastic modulator for active Q-switching of a fiber laser is presented. The modulator, which oscillates in a longitudinal eigenmode, was realized with LiTaO(3). This induces due to the photo-elastic effect a modulated artificial birefringence which modulates the polarization of passing light. When used together with a polarizer inside a laser cavity the laser photon life time is strongly modulated and the laser may start to emit laser pulses. We realized this with a fiber laser based on a 5m long double clad Nd-doped fiber. The pulse repetition frequency was 400 kHz and the pulse duration 300ns.