Single C60 Molecule Research Articles

Charge-transfer dipole low-frequency vibronic excitation at single-molecular scale.

Scanning tunneling microscopy (STM) vibronic spectroscopy, which has provided submolecular insights into electron-vibration (vibronic) coupling, faces challenges when probing the pivotal low-frequency vibronic excitations. Because of eigenstate broadening on solid substrates, resolving low-frequency vibronic states demands strong decoupling. This work designs a type II band alignment in STM junction to achieve effective charge-transfer state decoupling. This strategy enables the successful identification of the lowest-frequency Hg(ω1) (Raman-active Hg mode) vibronic excitation within single C60 molecules, which, despite being notably pronounced in electron transport of C60 single-molecule transistors, has remained hidden at submolecular level. Our results show that the observed Hg(ω1) excitation is "anchored" to all molecules, irrespective of local geometry, challenging common understanding of structural definition of vibronic excitation governed by Franck-Condon principle. Density functional theory calculations reveal existence of molecule-substrate interfacial charge-transfer dipole, which, although overlooked previously, drives the dominant Hg(ω1) excitation. This charge-transfer dipole is not specific but must be general at interfaces, influencing vibronic coupling in charge transport.

C60 fullerene nanoparticles permeability through the model lipid envelope of coronavirus and their anticoronavirus effect in the in ovo system

Background: An urgent problem of modern biomedicine is the search for potential ways to reduce the spread of coronavirus infections in human and animal populations and eliminate the impact of coronavirus on their bodies. Aim of the work was to determine the structural organization of C60 fullerenes in a model cell medium, to assess their potential ability to penetrate the model lipid envelope of a coronavirus, thus destroying its integrity, as well as the effectiveness of the anticoronavirus action in the in ovo system. Methods: The research was conducted using the Gromacs 2020 software package and the Charmm36 force field. The CHARMM-GUI web resource was used to construct the lipid envelope of a coronavirus. Virological and toxicological methods were used in the in ovo experiments. Results: It is shown that at the initial stages of molecular dynamics C60 fullerene forms small nanoclusters in the amount of 7–16 molecules, which is affected by the initial concentration of C60 fullerene in a model cell medium. At the same time, the shape of nanostructures for the number of molecules over 16 may differ from the correct spherical shape. It was established that C60 fullerene and its nanoclusters are able to penetrate inside the lipid envelope of a coronavirus. In particular, a single C60 molecule can migrate, completely embed itself in the lipid envelope, or move within it. It was found that C60 fullerene aqueous solution, at the maximum permissible concentration (MPC) of 30 μg/embryo, reduces the infectious activity of the chicken infectious bronchitis (CIB) coronavirus when it is used 1, 2 and 4 h after the infection of a sensitive biological system with a coronavirus. Conclusions: It is shown that aggregation of C60 fullerene in a model cell medium can occur in different ways: either before penetration into the lipid envelope of a coronavirus, or inside it. C60 fullerenes, both individually and as part of nanoclusters, are able to form pores in the envelope of a coronavirus, destroying its integrity, which possibly leads to disruption of the corresponding stages of its replication cycle and attachment to cell receptors. It was established that C60 fullerene aqueous solution, when used in the MPC value, shows antiviral activity against the CIB coronavirus in its early stages of interaction with the cell (1–4 h).

Effects of electron charging and magnetization configuration on the electronic properties of Ni/C60/Ni single molecule transistors

We report charge-state-dependent electron transport through single C60 molecule transistors with ferromagnetic Ni electrodes. We have found that the addition of an extra electron onto the C60 molecule in its equilibrium state leads to strong enhancement in the coupling between the C60 molecule and the Ni electrodes. Furthermore, even the magnetization configuration of the Ni electrodes modulates the hybridization in this strong coupling region, giving rise to a very large conductance change upon magnetization reversal. This work demonstrates great potentiality of ferromagnetic metal electrodes in controlling transport characteristics of single molecule transistors through modulation of charge states and/or magnetization configurations.

Joule Heating in Single-Molecule Point Contacts Studied by Tip-Enhanced Raman Spectroscopy.

Heating and cooling in current-carrying molecular junctions is a crucial issue in molecular electronics. The microscopic mechanism involves complex factors such as energy inputs, molecular properties, electrode materials, and molecule-electrode coupling. To gain an in-depth understanding, it is a desired experiment to assess vibrational population that represents the energy distribution stored within the molecule. Here, we demonstrate the direct observation of vibrational heating in a single C60 molecule by means of tip-enhanced Raman spectroscopy (TERS). The heating of respective vibrational modes is monitored by anti-Stokes Raman scattering in the TERS spectra. The precise control of the gap distance in the single-molecule junction allows us to reveal a qualitatively different heating mechanism in distinct electron transport regimes, namely, the tunneling and single-molecule point contact (SMPC) regimes. Strong Joule heating via inelastic electron-vibration scattering occurs in the SMPC regime, whereas optical heating is predominant in the tunneling regime. The strong Joule heating at the SMPC also leads to a pronounced red shift of the Raman peak position and line width broadening. Furthermore, by examining the SMPC with several types of contact surfaces, we show that the heating efficiency is related to the current density at the SMPC and the vibrational dissipation channels into the electrode.

Thermally Stable Array of Discrete C60s on a Two-Dimensional Crystalline Adlayer of Macrocycles both in Vacuo and under Ambient Pressure.

A periodic monolayer array of discrete C60s was generated on an atomically flat Au(111) surface with the aid of a template adlayer. The template was a two-dimensional (2D) array of molecular pits prepared on an Au(111) surface through 2D crystallization of shape-persistent macrocycles composed of four carbazole and four salphens/Ni-salphens with a 1 nm hollow. Scanning tunneling microscopy imaging under ultra-high vacuum revealed that the square-shaped macrocycles, with 1.5 nm sides, were arranged with a periodic spacing of approximately 4.0 nm on the Au(111) surface, where the orientation and periodicity of the macrocycles were dependent on their chemical structures. After sublimation of C60s onto the adlayer, a single C60 molecule was entrapped in each pit, and an ordered molecular array of C60s was attained with a pattern similar to that of the macrocycles. The periodic pattern of C60s on the surface was thermally stable up to approximately 200 °C, even under ambient pressure. Scanning tunneling spectroscopy suggested the existence of an electronic interaction between the C60s and the Au(111) surface that was influenced by the macrocycle template on the surface.

Charge Transfer-Mediated Dramatic Enhancement of Raman Scattering upon Molecular Point Contact Formation.

Charge-transfer enhancement of Raman scattering plays a crucial role in current-carrying molecular junctions. However, the microscopic mechanism of light scattering in such nonequilibrium systems is still imperfectly understood. Here, using low-temperature tip-enhanced Raman spectroscopy (TERS), we investigate how Raman scattering evolves as a function of the gap distance in the single C60-molecule junction consisting of an Ag tip and various metal surfaces. Precise gap-distance control allows the examination of two distinct transport regimes, namely tunneling regime and molecular point contact (MPC). Simultaneous measurement of TERS and the electric current in scanning tunneling microscopy shows that the MPC formation results in dramatic Raman enhancement that enables one to observe the vibrations undetectable in the tunneling regime. This enhancement is found to commonly occur not only for coinage but also transition metal substrates. We suggest that the characteristic enhancement upon the MPC formation is rationalized by charge-transfer excitation.

Abnormally High-Lithium Storage in Pure Crystalline C60 Nanoparticles.

Li+ intercalates into a pure face-centered-cubic (fcc) C60 structure instead of being adsorbed on a single C60 molecule. This hinders the excess storage of Li ions in Li-ion batteries, thereby limiting their applications. However, the associated electrochemical processes and mechanisms have not been investigated owing to the low electrochemical reactivity and poor crystallinity of the C60 powder. Herein, a facile method for synthesizing pure fcc C60 nanoparticles with uniform morphology and superior electrochemical performance in both half- and full-cells is demonstrated using a 1 m LiPF6 solution in ethylene carbonate/diethyl carbonate (1:1 vol%) with 10% fluoroethylene carbonate. The specific capacity of the C60 nanoparticles during the second discharge reaches ≈750 mAh g-1 at 0.1 A g-1 , approximately twice that of graphite. Moreover, by applying in situ X-ray diffraction, high-resolution transmission electron microscopy, and first-principles calculations, an abnormally high Li storage in a crystalline C60 structure is proposed based on the vacant sites among the C60 molecules, Li clusters at different sites, and structural changes during the discharge/charge process. The fcc of C60 transforms tetragonal via orthorhombic Lix C60 and back to the cubic phase during discharge. The presented results will facilitate the development of novel fullerene-based anode materials for Li-ion batteries.

Delocalized exciton formation in C60 linear molecular aggregates.

Organic semiconducting materials containing C60 molecules are efficient acceptors for planar perovskite solar cells. In this work, we theoretically investigate the optical and excitonic properties of C60 linear molecular aggregates (composed of 1 to 7 C60 molecules) via the real-time-propagation rt-TDDFT technique. In the case of a single C60 molecule, the photoabsorption peaks are dominated by localized molecular excitons. We furthermore demonstrate that, in the case of linear molecular aggregates, the photoabsorption peaks are contributed by localized molecular excitons, charge transfer excitons, and Wannier-like delocalized excitons. This result is different to the accepted theory that only localized molecular excitons or charge transfer excitons can be produced in organic semiconducting materials. This work provides additional insights into the exciton formation in C60 molecular aggregates and may help in the rational design of efficient solar cells.

Glycofullerenes Inhibit Particulate Matter Induced Inflammation and Loss of Barrier Proteins in HaCaT Human Keratinocytes.

Exposure to particulate matter (PM) has been linked to pulmonary and cardiovascular dysfunctions, as well as skin diseases, etc. PM impairs the skin barrier functions and is also involved in the initiation or exacerbation of skin inflammation, which is linked to the activation of reactive oxygen species (ROS) pathways. Fullerene is a single C60 molecule which has been reported to act as a good radical scavenger. However, its poor water solubility limits its biological applications. The glyco-modification of fullerenes increases their water solubility and anti-bacterial and anti-virus functions. However, it is still unclear whether it affects their anti-inflammatory function against PM-induced skin diseases. Hence, glycofullerenes were synthesized to investigate their effects on PM-exposed HaCaT human keratinocytes. Our results showed that glycofullerenes could reduce the rate of PM-induced apoptosis and ROS production, as well as decrease the expression of downstream mitogen-activated protein kinase and Akt pathways. Moreover, PM-induced increases in inflammatory-related signals, such as cyclooxygenase-2, heme oxygenase-1, and prostaglandin E2, were also suppressed by glycofullerenes. Notably, our results suggested that PM-induced impairment of skin barrier proteins, such as filaggrin, involucrin, repetin, and loricrin, could be reduced by pre-treatment with glycofullerenes. The results of this study indicate that glycofullerenes could be potential candidates for treatments against PM-induced skin diseases and that they exert their protective effects via ROS scavenging, anti-inflammation, and maintenance of the expression of barrier proteins.

The Unconventional Influence of a Nearby Molecule onto Transport of Single C60 Molecule Transistor**Supported by the National Key R&D Program of China (2016YFA0200800), the Strategic Priority Research Program of Chinese Academy of Sciences under Grant Nos XDB30000000 and XDB07030100, the Sinopec Innovation Scheme (A-381), and the Rise-Sinopec Fund (No 10010104-18-ZC0609-0003).

We study the transport property of single C60 molecular transistors with special focus on the situation that other molecules are in vicinity. The devices are prepared using electromigration and thermal deposition techniques. Pure single C60 molecule transistors show typical coulomb blockade behavior at low temperature. When we increase the coverage of molecules slightly by extending the deposition time, the transport spectrum of devices displays a switching behavior in the general coulomb blockade pattern. We attribute this unconventional phenomenon to the influence from a nearby C60 molecule. By analyzing this transport behavior quantitatively based on the parallel-double-quantum-dot model, the interaction from the nearby molecule is proved to be of capacity and tunneling coupling. Thermal stimulation is also applied to the device to investigate the effect of local charging environment variation on intermolecular interaction.

Adsorption geometries and interface electronic structure of C60 on Si(100)2 × 1 reconstruction surface

The adsorption geometries and interface electronic structure of C60 adsorbed on the Si(100)2 × 1 reconstruction surface have been investigated. Twelve adsorption geometries with different adsorption sites and molecular orientations are taken into account. The adsorption energy calculations discover more favorable adsorption geometries of a single C60 molecule. Simulated scanning tunneling microscope (STM) images distinctly show the intramolecular features, which depend only on the molecule orientation. Charge density difference (CDD) analysis and surface work function calculations confirm the negative charge transfers from Si(100)2 × 1 substrate to C60. The orbital hybridization and chemical bonding of interface C and Si atoms are clarified by density of states (DOS) and partial DOS (PDOS) analysis.

Self-Assembled and Nonassembled Alkylated-Fullerene Materials.

Fullerene (C60), a π-conjugated cage molecule consisting of 60 sp2-hybridized carbon atoms that are arranged into perfect icosahedral symmetry, is one of the most extensively studied nanocarbon materials by virtue of its characteristic spherical structure, fascinating optoelectronic properties, and widespread applications in material science. To implement practical applications, C60 is generally used as a building motif to assemble into various ordered superstructures. Unlike the controllable face-to-face π-π interactions of planar π-conjugated molecules, the π-π interactions between the three-dimensional spherical C60 units are random and directionless, which generally lead to complicated aggregated structures and unpredictable properties. The primary target of our research is to produce a robust design strategy for functional C60 materials, by which the single C60 molecules can be engineered into desirable self-organized architectures with optimized functions. To this end, we focused on alkylated fullerene (alk-C60) derivatives, a simple molecular system whose two components, alkyl chains and C60, exhibit both hydrophobicity yet different affinities to organic solvents. As a result, the alk-C60 derivatives present an unusual "hydrophobic amphiphile" system. Through systematic tuning of the substitution pattern of a series of alkyl side chains (number, length, branching, and substitution position) and external experimental conditions, the factors influencing alk-C60 self-assembly behaviors were determined. In addition, the feasibility of forming hybrid coassemblies with alk-C60 and other nanocarbon materials was demonstrated. By taking full advantage of the hydrophobic nature and active optoelectronic properties of these self- or hybrid-assemblies, various superhydrophobic materials and/or optoelectronic devices were developed. However, supported only by weak noncovalent interactions, these ordered superstructures are intrinsically fragile under various external stimuli. To improve the structural stability and achieve consistent optoelectronic performance of these novel materials, we strengthened the ordered structures via metallization and plasticization. Both approaches gave rise to robust and endurable materials with functions inherited from the pristine assemblies but at the cost of their former softness and facile processability. Thereafter, we focused on amorphous materials in view of their consistent and predictable optoelectronic properties that are independent of their geometry and physical environment. Unexpectedly, the amorphous materials obtained were liquids at room temperature, whose excellent deformability might enable applications in flexible/wearable optoelectronic devices. However, the lack of sufficient molecular order impaired their optoelectronic performance. To address this, we devised a straightforward strategy toward the directed ordered self-assembly of the alk-C60 liquids by adding molecular cofactors (n-alkanes or C60) into the liquids. Using this strategy, the balance between intermolecular order and material softness can be readily adjusted to meet different application requirements. Through iterative refinements to our novel alk-C60 system, we have demonstrated its power in generating numerous self-assembled, hybrid-assembled, and nonassembled materials toward versatile applications. We believe such a comprehensive description of these alk-C60-based functional materials provides deep insights into these still-evolving materials, which will underpin more advanced applications in near future.

Theoretical Investigation of Molecular and Electronic Structures of Buckminsterfullerene-Silicon Quantum Dot Systems.

Density functional theory (DFT) and density functional tight binding (DFTB) molecular dynamics (DFTB/MD) simulations of embedding and relaxation of buckminsterfullerene C60 molecules chemisorbed on (001) and (111) surfaces and inside bulk silicon lattice were performed. DFT calculations of chemisorbed fullerenes on both surfaces show that the C60 molecule deformation was very small and the C60 binding energies were roughly ∼4 eV. The charge analysis shows that the C60 molecule charges on (001) and (111) surfaces were between -2 and -3.5 electrons, respectively, that correlates well with the number of C-Si bonds linking the fullerene molecule and the silicon surface. DFT calculations of the C60 molecule inside bulk silicon confirm that the C60 molecule remains stable with the deformation energy values of between 11 and 15 eV for geometries with different C60 configurations. The formation of some C-Si bonds causes local silicon amorphization and corresponding electronic charge uptake on the embedded fullerene cages. Charge analysis confirms that a single C60 molecule can accept up to 20 excessive electrons that can be used in practice, wherein the main charge contribution is located on the fullerene's carbon atoms bonded to silicon atoms. These DFT calculations correlate well with DFTB/MD simulations of the embedding process. In this process, the C60 molecule was placed on the top of the Si(111) surface, and it was further exposed by a stream of silicon dimers, resulting in subsequent overgrowth by silicon.

The peculiar behavior of fullerene C60 in mixtures of ‘good’ and polar solvents: Colloidal particles in the toluene–methanol mixtures and some other systems

The state of C60 in toluene–methanol mixtures and some other solvents was studied within the range of fullerene concentrations from 4×10−7 to 4×10−5M. The variations in the particle size from ca. 200–500 to ca. 1nm, as followed up using the dynamic light scattering (DLS) method, were compared with the UV–vis absorption spectra. The threshold composition of the mixed solvent, which corresponds to the disappearance of single C60 molecules, depends on the fullerene concentration. In toluene–methanol systems, small amounts of large aggregates were detected via the DLS even under conditions of substantial predominance of single molecules. The examination of the fullerene in several other binary organic solvents reveals the specific features of the formation and behavior of the negatively charged colloidal particles.

A robust molecular probe for Ångstrom-scale analytics in liquids.

Traditionally, nanomaterial profiling using a single-molecule-terminated scanning probe is performed at the vacuum–solid interface often at a few Kelvin, but is not a notion immediately associated with liquid–solid interface at room temperature. Here, using a scanning tunnelling probe functionalized with a single C60 molecule stabilized in a high-density liquid, we resolve low-dimensional surface defects, atomic interfaces and capture Ångstrom-level bond-length variations in single-layer graphene and MoS2. Atom-by-atom controllable imaging contrast is demonstrated at room temperature and the electronic structure of the C60–metal probe complex within the encompassing liquid molecules is clarified using density functional theory. Our findings demonstrates that operating a robust single-molecular probe is not restricted to ultra-high vacuum and cryogenic settings. Hence the scope of high-precision analytics can be extended towards resolving sub-molecular features of organic elements and gauging ambient compatibility of emerging layered materials with atomic-scale sensitivity under experimentally less stringent conditions.

Charge Transfer Complexation of Ta-Encapsulating Ta@Si16 Superatom with C60

The tantalum-encapsulating Si16 cage nanocluster superatom (Ta@Si16) has been a promising candidate for a building block of nanocluster-based functional materials. Its chemical states of Ta@Si16 deposited on an electron acceptable C60 fullerene film were evaluated by X-ray and ultraviolet photoelectron spectroscopies (XPS and UPS, respectively). XPS results for Si, Ta, and C showed that Ta@Si16 combines with a single C60 molecule to form the superatomic charge transfer (CT) complex, (Ta@Si16)+C60–. The high thermal and chemical robustness of the superatomic CT complex has been revealed by the XPS and UPS measurements conducted before and after heat treatment and oxygen exposure. Even when heated to 720 K or subjected to ambient oxygen, Ta@Si16 retained its original framework, forming oxides of Ta@Si16 superatom.

Transport properties of the H2O@C60-dimer-based junction

Theoretical predictions play an important role in finding potential applications in molecular electronics. Fullerenes have a number of potential applications, and the charge flow from a single C60 molecule to another becomes more versatile and more interesting after doping. Here, we report the conductance of two H2O@C60 molecules in series order and how the number of encapsulated water molecules influences the transport properties of the junction. Encapsulating an H2O molecule into one of the C60 cages increases the conductance of the dimer. Negative differential resistance is found in the dimer systems, and its peak-to-valley current ratio depends on the number of encapsulated H2O molecules. The conductance of the C60 dimer and the H2O@C60 dimer is two orders of magnitude smaller than that of the C60 monomer. Furthermore, we demonstrate that the conductance of the molecular junctions based on the H2O@C60 dimer can be tuned by moving the encapsulated H2O molecules. The conductance is H2O-position dependent. Our findings indicate that H2O@C60 can be used as a building block in C60-based molecular electronic devices and sensors.

Inelastic Electron Tunneling of C60 on Gold Surfaces from First-Principles Calculations

The simulation of IET spectra of a single C60 molecule placed between two gold electrodes has evidenced the high sensitivity of IET spectroscopy to the C60 orientation and also to the molecule–electrode distance. When considering a small molecule–electrode distance (d = 2.0 Å) the dominant peaks are associated with longitudinal displacements of the contact moieties. For d = 2.8 Å, depending on the adsorption configuration the dominant signatures are not associated with the same atomic motions, while for larger distances (d = 4.0 Å) the four configurations only exhibit peaks corresponding to C–C stretching modes. The best agreement between experimental measurements and our theoretical calculations has been found when considering a molecular junction characterized by two hexagons of the C60 molecule aligned parallel to the Au(111) surfaces and centered on a hcp site, with a distance between the center of the hexagon aligned parallel to the Au(111) surface and the hcp site of the source (drain) reservoir of 2.8 Å (3.4 Å). Our approach can therefore be of great help in understanding, beside the intrinsic vibrational behavior of one compound, the small structural variations induced by the proximity to the metal electrodes.

Nanojunction between fullerene and one-dimensional conductive polymer on solid surfaces.

Bottom-up creation of huge molecular complexes by covalently interconnecting functional molecules and conductive polymers is a key technology for constructing nanoscale electronic circuits. In this study, we have created an array of molecule-polymer nanojunctions from C60 molecules and polydiacetylene (PDA) nanowires at designated positions on solid surfaces by controlling self-assemblies and intermolecular chemical reactions of molecular ingredients predeposited onto the surfaces. In the proposed method, the construction of each nanojunction spontaneously proceeds via two types of chemical reactions: a chain polymerization among self-assembled diacetylene compound molecules for creating a single PDA nanowire and a subsequent cycloaddition reaction between the propagating forefront part of the PDA backbone and a single C60 molecule adsorbed on the surface. Scanning tunneling microscopy has proved that the C60 molecule is covalently connected to each end of the π-conjugated PDA backbone. Furthermore, the decrease in the energy gap of the C60 molecule in nanojunctions is observed as compared with that of pristine C60 molecules, which is considered to be due to the covalent interaction between the PDA edge and the C60 molecule.

Spectroscopy of transmission resonances through a C60 junction

Electron transport through a single C60 molecule on Cu(1 1 1) has been investigated with a scanning tunnelling microscope in tunnelling and contact ranges. Single-C60 junctions have been fabricated by establishing a contact between the molecule and the tip, which is reflected by a down-shift in the lowest unoccupied molecular orbital resonance. These junctions are stable even at elevated bias voltages enabling conductance measurements at high voltages and nonlinear conductance spectroscopy in tunnelling and contact ranges. Spectroscopy and first principles transport calculations clarify the relation between molecular orbital resonances and the junction conductance. Due to the strong molecule–electrode coupling the simple picture of electron transport through individual orbitals does not hold.