Single Biofilms Research Articles

Biofilms of Listeria monocytogenes Produced at 12 ° C either in Pure Culture or in Co‐Culture with Pseudomonas aeruginosa Showed Reduced Susceptibility to Sanitizers

The biofilm-forming ability of 21 Listeria monocytogenes isolates, previously pulsotyped and corresponding to 16 strains, from different origins was evaluated using the Calgary Biofilm Device, at 37 °C. Biofilms of 4 selected strains were also produced either on pure cultures or on co-cultures with Pseudomonas aeruginosa (PAO1), at 12 °C and at 37 °C. For these biofilms, the minimum biofilm eradication concentrations (MBECs) of 4 commercial dairy sanitizers (1 alkyl amine acetate based--T99, 2 chlorine based--T66 and DD, and 1 phosphoric acid based--BP) were determined. Listeria monocytogenes biofilms grown, either at 37 °C or 12 °C, were able to achieve similar cell densities by using different incubation periods (24 h and 7 d, respectively). In co-culture biofilms, P. aeruginosa was the dominant species, either at 37 °C or at 12 °C, representing 99% of a total biofilm population of 6 to 7 log CFU/peg. Co-culture biofilms were generally less susceptible than L. monocytogenes pure cultures. More interestingly, the biofilms produced at 12 °C were usually less susceptible to the sanitizers than when produced at 37 °C. Single or co-culture biofilms of L. monocytogenes and PAO1, particularly produced at 12 °C, retrieved MBEC values for agents T99 and BP that were, at times, above the maximum in-use recommended concentrations for these agents. The results presented here reinforce the importance of the temperature used for biofilm formation, when susceptibility to sanitizers is being assessed. Since most food plants have cold wet growth niches in production and storage areas, susceptibility testing should be performed on biofilms produced at refrigeration temperatures. Moreover, the efficiency of the sanitizers used in food industries should be performed on mixed culture biofilms, since in field conditions these will predominate. The results presented here highlight the importance of the temperature used for biofilm formation, when susceptibility to disinfectants is being assessed, as biofilms produced at lower temperature were less susceptible to sanitizers.

In Vitro effect of low-level laser therapy on typical oral microbial biofilms

The aim of this study was to evaluate the effect of specific parameters of low-level laser therapy (LLLT) on biofilms formed by Streptococcus mutans, Candida albicans or an association of both species. Single and dual-species biofilms--SSB and DSB--were exposed to laser doses of 5, 10 or 20 J/cm(2) from a near infrared InGaAsP diode laser prototype (LASERTable; 780 ± 3 nm, 0.04 W). After irradiation, the analysis of biobilm viability (MTT assay), biofilm growth (cfu/mL) and cell morphology (SEM) showed that LLLT reduced cell viability as well as the growth of biofilms. The response of S. mutans (SSB) to irradiation was similar for all laser doses and the biofilm growth was dose dependent. However, when associated with C. albicans (DSB), S. mutans was resistant to LLLT. For C. albicans, the association with S. mutans (DSB) caused a significant decrease in biofilm growth in a dose-dependent fashion. The morphology of the microorganisms in the SSB was not altered by LLLT, while the association of microbial species (DSB) promoted a reduction in the formation of C. albicans hyphae. LLLT had an inhibitory effect on the microorganisms, and this capacity can be altered according to the interactions between different microbial species.

Bacterial Nanotubes for Intimate Sharing

Bacterial Nanotubes for Intimate Sharing

Role of planktonic and sessile extracellular metabolic byproducts on Pseudomonas aeruginosa and Escherichia coli intra and interspecies relationships

Bacterial species are found primarily as residents of complex surface-associated communities, known as biofilms. Although these structures prevail in nature, bacteria still exist in planktonic lifestyle and differ from those in morphology, physiology, and metabolism. This study aimed to investigate the influence of physiological states of Pseudomonas aeruginosa and Escherichia coli in cell-to-cell interactions. Filtered supernatants obtained under planktonic and biofilm cultures of each single species were supplemented with tryptic soy broth (TSB) and used as the growth media (conditioned media) to planktonic and sessile growth of both single- and two-species cultures. Planktonic bacterial growth was examined through OD(640) measurement. One-day-old biofilms were evaluated in terms of biofilm biomass (CV), respiratory activity (XTT), and CFU number. Conditioned media obtained either in biofilm or in planktonic mode of life triggered a synergistic effect on planktonic growth, mainly for E. coli single cultures growing in P. aeruginosa supernatants. Biofilms grown in the presence of P. aeruginosa biofilms-derived metabolites presented less mass and activity. These events highlight that, when developed in biofilm, P. aeruginosa release signals or metabolites able to prejudice single and binary biofilm growth of others species and of their own species. However, products released by their planktonic counterparts did not impair biofilm growth or activity. E. coli, living as planktonic or sessile cultures, released signals and metabolites or removed un-beneficial compounds which promoted the growth and activity of all the species. Our findings revealed that inter and intraspecies behaviors depend on the involved bacteria and their adopted mode of life.

Development of a simultaneous partial nitrification and anaerobic ammonia oxidation process in a single reactor

Up-flow oxygen-controlled biofilm reactors equipped with a non-woven fabric support were used as a single reactor system for autotrophic nitrogen removal based on a combined partial nitrification and anaerobic ammonium oxidation (anammox) reaction. The up-flow biofilm reactors were initiated as either a partial nitrifying reactor or an anammox reactor, respectively, and simultaneous partial nitrification and anammox was established by careful control of the aeration rate. The combined partial nitrification and anammox reaction was successfully developed in both biofilm reactors without additional biomass inoculation. The reactor initiated as the anammox reactor gave a slightly higher and more stable mean nitrogen removal rate of 0.35 (±0.19) kg-N m(-3) d(-1) than the reactor initiated as the partial nitrifying reactor (0.23 (±0.16) kg-N m(-3) d(-1)). FISH analysis revealed that the biofilm in the reactor started as the anammox reactor were composed of anammox bacteria located in inner anoxic layers that were surrounded by surface aerobic AOB layers, whereas AOB and anammox bacteria were mixed without a distinguishable niche in the biofilm in the reactor started as the partial nitrifying reactor. However, it was difficult to efficiently maintain the stable partial nitrification owing to inefficient aeration in the reactor, which is a key to development of the combined partial nitrification and anammox reaction in a single biofilm reactor.

Influence of the Diversity of Bacterial Isolates from Drinking Water on Resistance of Biofilms to Disinfection

Single- and multispecies biofilms formed by six drinking water-isolated bacterial species were used to assess their susceptibilities to sodium hypochlorite (SHC). In general, multispecies biofilms were more resistant to inactivation and removal than single biofilms. Total biofilm inactivation was achieved only for Acinetobacter calcoaceticus single-species biofilms and for those multispecies biofilms without A. calcoaceticus. Biofilms with all bacteria had the highest resistance to SHC, while those without A. calcoaceticus were the most susceptible. A. calcoaceticus formed single biofilms susceptible to SHC; however, its presence in multispecies biofilms increased their resistance to disinfection.

Online assessment of biofilm development, sloughing and forced detachment in tube reactor by means of magnetic resonance microscopy

Magnetic resonance microscopy (MRM) was successfully applied for non-invasive online monitoring of biofilm development, sloughing, and forced detachment. Biofilm cultivation was performed in a tube reactor directly placed in the MRM scanner. Based on the differences in relaxation time of free and bound protons, the distributed water signal was allocated to the bulk and the biofilm phase. The velocity of the flowing water in the tube reactor was measured in all three directions (x, y, and z) at spatial resolutions of 78 microm. From the velocity data, maps of flow gradients (shear rates) were derived. The experiments showed that a more compact biofilm structure is sloughed off in total with nearly no biomass left on the substratum. Continued biofilm cultivation resulted in filamentous biofilm structures, which did not show any sloughing. Experiments at higher Reynolds numbers were performed in order to force biofilm detachment. Continuous measuring of proton velocity and biomass was used to characterize the different stages of biofilm development. The measurements revealed that biofilms are able to resist extremely high local shear stress being raised up to factor of 20 compared to the mean local shear stress acting on the complete biofilm surface. The maximum local shear stress of single biofilm structures exposed to flow was found to be on average seven times higher compared to the mean local shear stress of the entire biofilm surface. MRM was able to visualize and quantify the development of biofilms and interaction of biofilms with the surrounding fluid at the meso-scale. It is suggested that detachment and sloughing depends on both internal and external structural parameters.

Diarrhea-associated biofilm formed by enteroaggregative Escherichia coli and aggregative Citrobacter freundii: a consortium mediated by putative F pili

BackgroundEnteroaggregative Escherichia coli (EAEC) are enteropathogenic strains identified by the aggregative adhesion (AA) pattern that share the capability to form biofilms. Citrobacter freundii is classically considered as an indigenous intestinal species that is sporadically associated with diarrhea.ResultsDuring an epidemiologic study focusing on infantile diarrhea, aggregative C. freundii (EACF) and EAEC strains were concomitantly recovered from a severe case of mucous diarrhea. Thereby, the occurrence of synergic events involving these strains was investigated. Coinfection of HeLa cells with EACF and EAEC strains showed an 8-fold increase in the overall bacterial adhesion compared with single infections (P < 0.001). The synergic effect was mediated by physical interactions among the bacteria and primed in the absence of chemical signaling and without the participation of host cells. Thus, significant increases (2.7-fold on average) in bacterial adhesion were also observed during the formation of mixed biofilms on abiotic surfaces. Bacterial settling assays showed that EAEC strains harboring F-pili genes (traA) were capable of forming bacterial aggregates only in the presence of EACF. Scanning electronic microscopy analyses revealed that bacterial aggregates as well as enhanced biofilms formed by EACF and traA-positive EAEC were mediated by non-bundle forming, flexible pili. Moreover, mixed biofilms formed by EACF and traA-positive EAEC strains were significantly reduced using nonlethal concentration of zinc, a specific inhibitor of F pili. In addition, EAEC strains isolated from diarrheic children frequently produced single biofilms sensitive to zinc.ConclusionsPutative F pili expressed by EAEC strains boosted mixed biofilm formation when in the presence of aggregative C. freundii.

A glimpse under the rim - the composition of microbial biofilm communities in domestic toilets

To determine the microbial composition of biofilms in domestic toilets by molecular means. Genomic DNA was extracted from six biofilm samples originating from households around Düsseldorf, Germany. While no archaeal 16S rRNA or fungal ITS genes were detected by PCR, fingerprinting of bacterial 16S rRNA genes revealed a diverse community in all samples. These communities also differed considerably between the six biofilms. Using the Ribosomal Database Project (RDP) classifier tool, 275 cloned 16S rRNA gene sequences were assigned to 11 bacterial phyla and 104 bacterial genera. Only 15 genera (representing 121 sequences affiliated with Acidobacteria, Actinobacteria, Bacteroidetes, Planctomycetes and Proteobacteria) occurred in at least half of the samples or contributed at least 10% of the sequences in a single biofilm. These sequences were defined as 'typical' for toilet biofilms, and they were examined in more detail. On a 97% sequence similarity level, these sequences represented 56 species. Twelve of these were closely related to well-described bacterial species, and only two of them were categorized as belonging to risk group 2. No 16S rRNA genes of typical faecal bacteria were detected in any sample. Virtually all 'typical' clones were found to be closely related to bacteria or to sequences obtained from environmental sources, implicating that the flushing water is the main source of recruitment. In view of the great diversity of mostly yet-uncultured bacteria and the considerable differences between individual toilets, very general strategies appear to be most suited for the removal and prevention of toilet biofilms. For the first time, a molecular fingerprinting and cloning approach was used to monitor the species composition in biofilm samples taken from domestic toilets. Knowledge about the microbial composition of biofilms in domestic toilets is a prerequisite for developing and evaluating strategies for their removal and prevention.

Oral biofilm models for mechanical plaque removal.

In vitro plaque removal studies require biofilm models that resemble in vivo dental plaque. Here, we compare contact and non-contact removal of single and dual-species biofilms as well as of biofilms grown from human whole saliva in vitro using different biofilm models. Bacteria were adhered to a salivary pellicle for 2 h or grown after adhesion for 16 h, after which, their removal was evaluated. In a contact mode, no differences were observed between the manual, rotating, or sonic brushing; and removal was on average 39%, 84%, and 95% for Streptococcus mutans, Streptococcus oralis, and Actinomyces naeslundii, respectively, and 90% and 54% for the dual- and multi-species biofilms, respectively. However, in a non-contact mode, rotating and sonic brushes still removed considerable numbers of bacteria (24–40%), while the manual brush as a control (5–11%) did not. Single A. naeslundii and dual-species (A. naeslundii and S. oralis) biofilms were more difficult to remove after 16 h growth than after 2 h adhesion (on average, 62% and 93% for 16- and 2-h-old biofilms, respectively), while in contrast, biofilms grown from whole saliva were easier to remove (97% after 16 h and 54% after 2 h of growth). Considering the strong adhesion of dual-species biofilms and their easier more reproducible growth compared with biofilms grown from whole saliva, dual-species biofilms of A. naeslundii and S. oralis are suggested to be preferred for use in mechanical plaque removal studies in vitro.

Adaptive evolution in single species bacterial biofilms

Little is known about the dynamics of cellular growth, death, and evolution within bacterial biofilms. Here we show evidence of evolution within single-species biofilms in real time. Escherichia coli harvested from 22-day-old biofilms express a competitive advantage over cells incubated in biofilms for shorter periods of time. This advantage is manifested as the ability of aged cells to outcompete younger cells in the presence of a pre-existing biofilm, even though cells from older biofilms do not express an increased ability to form initial biofilms on a fresh, unoccupied surface. This phenomenon is similar to the growth advantage in stationary phase, or GASP, phenotype exhibited by planktonically grown cells when incubated under competitive conditions. The ability of bacteria in biofilms to show rapid heritable change has implications for our understanding of the adaptive abilities of biofilms in a wide variety of natural and man-made environments.

Species association increases biofilm resistance to chemical and mechanical treatments

The study of biofilm ecology and interactions might help to improve our understanding of their resistance mechanisms to control strategies. Concerns that the diversity of the biofilm communities can affect disinfection efficacy have led us to examine the effect of two antimicrobial agents on two important spoilage bacteria. Studies were conducted on single and dual species biofilms of Bacillus cereus and Pseudomonas fluorescens. Biofilms were formed on a stainless steel rotating device, in a bioreactor, at a constant Reynolds number of agitation (Re A). Biofilm phenotypic characterization showed significant differences, mainly in the metabolic activity and both extracellular proteins and polysaccharides content. Cetyl trimethyl ammonium bromide (CTAB) and glutaraldehyde (GLUT) solutions in conjunction with increasing Re A were used to treat biofilms in order to assess their ability to kill and remove biofilms. B. cereus and P. fluorescens biofilms were stratified in a layered structure with each layer having differential tolerance to chemical and mechanical stresses. Dual species biofilms and P. fluorescens single biofilms had both the highest resistance to removal when pre-treated with CTAB and GLUT, respectively. B. cereus biofilms were the most affected by hydrodynamic disturbance and the most susceptible to antimicrobials. Dual biofilms were more resistant to antimicrobials than each single species biofilm, with a significant proportion of the population remaining in a viable state after exposure to CTAB or GLUT. Moreover, the species association increased the proportion of viable cells of both bacteria, comparatively to the single species scenarios, enhancing each other's survival to antimicrobials and the biofilm shear stress stability.

Physiology and behavior of Pseudomonas fluorescens single and dual strain biofilms under diverse hydrodynamics stresses

Three selected Pseudomonas fluorescens strains (the type strain and two strains originally isolated from a dairy processing plant — D3-348 and D3-350) were used to form turbulent and laminar flow-generated biofilms under laboratorial conditions using flow cell reactors with stainless steel substrata. The D3-348 and D3-350 strains were also used to form dual biofilms. Biofilm phenotypic characteristics, such as respiratory activity, total and culturable cells, biomass, total and matrix proteins and polysaccharides were compared. Biofilm mechanical stability, as a major feature involved in biofilm persistence, was also assessed using a rotating device system. The results indicate that hydrodynamic conditions have a remarkable impact on biofilm phenotype. Turbulent biofilms were more active, had more mass per adhesion surface area, a higher number of total and culturable cells, a higher amount of total proteins per gram of biofilm, similar matrix proteins and identical (D3-348 and D3-350 single and dual biofilms) or smaller (type strain) total and matrix polysaccharides content than their laminar counterparts. Biofilms formed by the type strain revealed a considerable higher amount of total and culturable cells and a higher amount of total proteins (turbulent biofilms) and total and matrix polysaccharides per gram of biofilm than single and dual biofilms formed by the other strains. Mechanical stability assays disclosed that biofilms formed by both type and D3-348 strains had the highest resistance to removal when exposed to mechanical stress. Dual strain biofilms population analysis revealed an apparent co-existence, evidencing neutral interactions. The overall results provided useful information regarding a broad spectrum of P. fluorescens biofilm phenotypic parameters, which can contribute to control and model biofilm processes in food industry.

Membrane Aerated Biofilm Reactors: A Brief Current Review

Membrane aerated biofilm reactors (MABRs) represent a relatively new biotreatment technology. In a MABR, biofilm is grown on a gas-permeable membrane (often a hollow fiber membrane). Soluble organic compounds in the liquid are supplied to the biofilm from the biofilm-liquid interface whereas oxygen supply to the biofilm is from the biofilm-membrane interface (by oxygen diffusing through the membrane). MABRs can achieve bubble-less aeration and high oxygen utilization efficiency (up to 100%) and the biofilm can be stratified into aerobic/anoxic/anaerobic zones to simultaneously achieve removal of carbonaceous organic pollutants as well as nitrification and denitrification (if needed) in a single biofilm. This article briefly reviews the MABR process, including the characteristics, membrane materials, modular design, operation parameters and the potential applications, from relevant recent patents and literature.

Sodium dodecyl sulfate allows the persistence and recovery of biofilms of Pseudomonas fluorescens formed under different hydrodynamic conditions

The effect of the anionic surfactant sodium dodecyl sulfate (SDS) on Pseudomonas fluorescens biofilms was investigated using flow cell reactors with stainless steel substrata, under turbulent (Re = 5200) and laminar (Re = 2000) flow. Steady-state biofilms were exposed to SDS in single doses (0.5, 1, 3 and 7 mM) and biofilm respiratory activity and mass measured at 0, 3, 7 and 12 h after the SDS application. The effect of SDS on biofilm mechanical stability was assessed using a rotating bioreactor. Whilst high concentrations (7 mM) of SDS promoted significant biofilm inactivation, it did not significantly reduce biofouling. Turbulent and laminar flow-generated biofilms had comparable susceptibility to SDS application. Following SDS exposure, biofilms rapidly recovered over the following 12 h, achieving higher respiratory activity values than before treatment. This phenomenon of post-treatment recovery was more pronounced for turbulent flow-generated biofilms, with an increase in SDS concentration. The mechanical stability of the biofilms increased with surfactant application, except for SDS concentrations near the critical micellar concentration, as measured by biofilm removal due to an increase in external shear stress forces. The data suggest that although SDS exerts antimicrobial action against P. fluorescens biofilms, even if only partial and reversible, it had only limited antifouling efficacy, increasing biofilm mechanical stability at low concentrations and allowing significant and rapid recovery of turbulent flow-generated biofilms.

In vitro anti‐biofilm activity of macelignan isolated from Myristica fragrans Houtt. against oral primary colonizer bacteria

In early dental plaque formation, oral primary colonizers such as Streptococcus mutans, Streptococcus sanguis and Actinomyces viscosus are initially attached to the pellicle-coated tooth surface to form a biofilm. The study aimed to determine the efficacy of macelignan, isolated from nutmeg (Myristica fragrans Houtt.), in removing each single oral primary biofilm in vitro on a polystyrene 96-well microtiter plate. Four biofilm growth phases (4, 12, 20 and 24 h) were evaluated in this study after treatment with macelignan at various concentrations (0.2, 2 and 10 microg/mL) and exposure times (5, 10 and 30 min). Anti-biofilm activity of macelignan was measured as the percentage of the remaining biofilm absorbance after macelignan treatment in comparison with the untreated control. At 24 h of biofilm growth, S. mutans, A. viscosus and S. sanguis biofilms were reduced by up to 30%, 30% and 38%, respectively, after treatment with 10 microg/mL macelignan for 5 min. Increasing the treatment time to 30 min resulted in a reduction of more than 50% of each of the single primary biofilms. The results indicate that macelignan is a potent natural anti-biofilm agent against oral primary colonizers.

Biofilm Interactions between Distinct Bacterial Genera Isolated from Drinking Water

In the environment, multiple microorganisms coexist as communities, competing for resources and often associated as biofilms. In this study, single- and dual-species biofilm formation by, and specific activities of, six heterotrophic intergeneric bacteria were determined using 96-well polystyrene plates over a 72-h period. These bacteria were isolated from drinking water and identified by partial 16S rRNA gene sequencing. A series of planktonic studies was also performed, assessing the bacterial growth rate, motility, and production of quorum-sensing inhibitors (QSI). This constituted an attempt to identify key attributes allowing bacteria to effectively interact and coexist in a drinking-water environment. We observed that in both pure and dual cultures, all of the isolates formed stable biofilms within 72 h, with specific metabolic activity decreasing, in most cases, with an increase in biofilm mass. The largest single- and dual-biofilm amounts were found for Methylobacterium sp. and the combination of Methylobacterium sp. and Mycobacterium mucogenicum, respectively. Evidences of microbial interactions in dual-biofilm formation, associated with appreciable biomass variation in comparison with single biofilms, were found for the following cases: synergy/cooperation between Sphingomonas capsulata and Burkholderia cepacia, S. capsulata and Staphylococcus sp., and B. cepacia and Acinetobacter calcoaceticus and antagonism between S. capsulata and M. mucogenicum, S. capsulata and A. calcoaceticus, and M. mucogenicum and Staphylococcus sp. A neutral interaction was found for Methylobacterium sp.-M. mucogenicum, S. capsulata-Staphylococcus sp., M. mucogenicum-A. calcoaceticus, and Methylobacterium sp.-A. calcoaceticus biofilms, since the resultant dual biofilms had a mass and specific metabolic activity similar to the average for each single biofilm. B. cepacia had the highest growth rate and motility and produced QSI. Other bacteria producing QSI were Methylobacterium sp., S. capsulata, and Staphylococcus sp. However, only for S. capsulata-M. mucogenicum, S. capsulata-A. calcoaceticus, and M. mucogenicum-Staphylococcus sp., dual-biofilm formation seems to be regulated by the QSI produced by S. capsulata and Staphylococcus sp. and by the increased growth rate of S. capsulata. The parameters assessed by planktonic studies did not allow prediction and generalization of the exact mechanism regulating dual-species biofilm formation between the drinking-water bacteria.

An in vitro microbial model for producing caries-like lesions on enamel

This study aimed to develop a low cost in vitro viable microbiological model to produce biofilms to be used in dental researches. Single and multi-species biofilms of S. mutans, S. sobrinus, S. mitis, S. salivarius, S. cricetus and S. sanguinis were grown on bovine enamel slabs during 10 days, in a sterile brain-heart infusion broth, containing 5% sucrose and incubated at 37°C in an atmosphere of 10% CO2. The slabs were transferred to a fresh medium at every 6, 12 or 24 hours. After the experimental period, enamel volume percent mineral was determined by cross-sectional microhardness. Caries-like lesions were found in all bacterial groups when compared with the control group. No statistical significant differences were found between S. mutans and S. sobrinus with respect of their cariogenicity or among the periods of medium change. However, it was found a statistical significant difference among the cariogenicity of S. salivarius and S. sanguinis (ANOVA followed by Tukey test). This model has successfully developed caries-like lesion on enamel and the medium can be changed at every 24 hours utilizing either S. mutans or S. sobrinus.

Microstructural differences between single-species and dual-species biofilms of Streptococcus mutans and Veillonella parvula, before and after exposure to chlorhexidine

Dual-species biofilms of Streptococcus mutans and Veillonella parvula are less susceptible to antimicrobials than single-species biofilms of the same microorganisms. The microstructure of single and dual-species biofilms of S. mutans and/or V. parvula was visualized to find out whether the spatial arrangement of bacteria in biofilms is related to survival strategies against antimicrobials. Biofilms were grown in glass-bottomed 96-well microtiter plates and exposed to chlorhexidine at 48 h. Fluorescent probes were used for staining. The microstructure of biofilms was analyzed by confocal scanning laser microscopy at 48, 96, 192, and 264 h. Spatial arrangement analysis was performed using DAIME software for 48 h biofilms. A decrease in the viability and thickness in all types of biofilms was detected after chlorhexidine treatment in time. In untreated biofilms, clustering was observed. In chlorhexidine-treated single-species biofilms, bacteria were dispersed. However, the most prominent clustering was observed in chlorhexidine-treated dual-species biofilm bacteria, which had a higher survival rate compared with chlorhexidine-treated single-species biofilms. Bacteria in dual-species biofilms establish a specific spatial arrangement, forming clusters within distances below 1.2 microm as a survival strategy against antimicrobials while the same bacteria lack this defensive construction in a single-species biofilm.

The role of hydrodynamic stress on the phenotypic characteristics of single and binary biofilms of Pseudomonas fluorescens

This study investigates the phenotype of turbulent (Re = 5,200) and laminar (Re = 2,000) flow-generated Pseudomonas fluorescens biofilms. Three P. fluorescens strains, the type strain ATCC 13525 and two strains isolated from an industrial processing plant, D3-348 and D3-350, were used throughout this study. The isolated strains were used to form single and binary biofilms. The biofilm physiology (metabolic activity, cellular density, mass, extracellular polymeric substances, structural characteristics and outer membrane proteins [OMP] expression) was compared. The results indicate that, for every situation, turbulent flow-generated biofilms were more active (p < 0.05), had more mass per cm(2) (p < 0.05), a higher cellular density (p < 0.05), distinct morphology, similar matrix proteins (p > 0.1) and identical (isolated strains -single and binary biofilms) and higher (type strain) matrix polysaccharides contents (p < 0.05) than laminar flow-generated biofilms. Flow-generated biofilms formed by the type strain revealed a considerably higher cellular density and amount of matrix polysaccharides than single and binary biofilms formed by the isolated strains (p < 0.05). Similar OMP expression was detected for the several single strains and for the binary situation, not dependent on the hydrodynamic conditions. Binary biofilms revealed an equal coexistence of the isolated strains with apparent neutral interactions. In summary, the biofilms formed by the type strain represent, apparently, the worst situation in a context of control. The results obtained clearly illustrate the importance of considering strain variation and hydrodynamics in biofilm development, and complement previous studies which have focused on physical aspects of structural and density differences.