Single-atom Alloys Research Articles

Screening of Silver‐Based Single‐Atom Alloy Catalysts for NO Electroreduction to NH3 by DFT Calculations and Machine Learning

AbstractExploring NO reduction reaction (NORR) electrocatalysts with high activity and selectivity toward NH3 is essential for both NO removal and NH3 synthesis. Due to their superior electrocatalytic activities, single‐atom alloy (SAA) catalysts have attracted considerable attention. However, the exploration of SAAs is hindered by a lack of fast yet reliable prediction of catalytic performance. To address this problem, we comprehensively screened a series of transition‐metal atom doped Ag‐based SAAs. This screening process involves regression machine learning (ML) algorithms and a compressed‐sensing data‐analytics approach parameterized with density‐functional inputs. The results demonstrate that Cu/Ag and Zn/Ag can efficiently activate and hydrogenate NO with small Φmax(η), a grand‐canonical adaptation of the Gmax(η) descriptor, and exhibit higher affinity to NO over H adatoms to suppress the competing hydrogen evolution reaction. The NH3 selectivity is mainly determined by the s orbitals of the doped single‐atom near the Fermi level. The catalytic activity of SAAs is highly correlated with the local environment of the active site. We further quantified the relationship between the intrinsic features of these active sites and Φmax(η). Our work clarifies the mechanism of NORR to NH3 and offers a design principle to guide the screen of highly active SAA catalysts.

Origin of unique electronic structures of single-atom alloys unraveled by interpretable deep learning.

We uncover the origin of unique electronic structures of single-atom alloys (SAAs) by interpretable deep learning. The approach integrates tight-binding moment theory with graph neural networks to accurately describe the local electronic structure of transition and noble metal sites upon perturbation. We emphasize the complex interplay of interatomic orbital coupling and on-site orbital resonance, which shapes the d-band characteristics of an active site, shedding light on the origin of free-atom-like d-states that are often observed in SAAs involving d10 metal hosts. This theory-infused neural network approach significantly enhances our understanding of the electronic properties of single-site catalytic materials beyond traditional theories.

Dilute Pd−Ni Alloy through Low‐temperature Pyrolysis for Enhanced Electrocatalytic Hydrogen Oxidation

AbstractDesigning highly active and cost‐effective electrocatalysts for the alkaline hydrogen oxidation reaction (HOR) is critical for advancing anion‐exchange membrane fuel cells (AEMFCs). While dilute metal alloys have demonstrated substantial potential in enhancing alkaline HOR performance, there has been limited exploration in terms of rational design, controllable synthesis, and mechanism study. Herein, we developed a series of dilute Pd−Ni alloys, denoted as x% Pd−Ni, based on a trace‐Pd decorated Ni‐based coordination polymer through a facile low‐temperature pyrolysis approach. The x% Pd−Ni alloys exhibit efficient electrocatalytic activity for HOR in alkaline media. Notably, the optimal 0.5 % Pd−Ni catalyst demonstrates high intrinsic activity with an exchange current density of 0.055 mA cm−2, surpassing that of many other alkaline HOR catalysts. The mechanism study reveals that the strong synergy between Pd single atoms (SAs)/Pd dimer and Ni substrate can modulate the binding strength of proton (H)/hydroxyl (OH), thereby significantly reducing the activation energy barrier of a decisive reaction step. This work offers new insights into designing advanced dilute metal or single‐atom‐alloys (SAAs) for alkaline HOR and potentially other energy conversion processes.

Evolution of Nitrogen-Coordinated Metal Single Atoms Toward Single-Atom Alloys on MgH₂ as Efficient and Stable Hydrogen Spillover Catalysts.

M-N-C catalysts with nitrogen-coordinated metal single-atom active sites have demonstrated high activity for hydrogen storage materials, but their stability in this application remains uncertain. This study addresses this issue by using nickel phthalocyanine (NiPc) molecules on MgH₂ particles as a model system. It is found that the N-coordinated high-valence Ni single atoms in the NiN₄ active site are unstable in the reducing environment of hydrogen storage, spontaneously evolving into zero-valence Ni, forming a Ni₁-Mg single-atom alloy (SAA). The Ni₁-Mg SAA exhibits remarkable stability in catalyzing Mg hydrogen storage reactions. Furthermore, it demonstrates comprehensive catalytic activity for each step of hydrogen absorption and desorption from Mg, surpassing the efficiency of the NiN₄ active site, especially in the critical steps of hydrogenation and dehydrogenation. Overall, the catalytic performance of Ni₁-Mg SAA is superior to most known nickel-based catalysts. This evolutionary process is also observed in FePc, CoPc, and tetraphenylporphyrin nickel (Ni-TPP), suggesting that this reducing transformation is a universal phenomenon for MN₄-type active sites in hydrogen storage catalysis.

Regulating the location relationship between Cu nanoparticles and Pt atoms to enhance the catalytic hydroisomerization performance: Together or apart?

Single atom catalysts have been recently reported as the efficient catalysts for hydroisomerization compared to the conventional nanoparticle catalyst. Despite the fascinating advantage in enhancing the metal activity or reducing the catalyst cost, the long-term stability of the single atom catalyst seemed not that satisfactory, especially when reacting under atmospheric pressure. Herein, Pt single atom catalysts were combined with Cu nanoparticles by different means to explore a new way to improve the catalytic performance. Cu nanoparticles were located away from Pt sites to form a binary catalyst, or acted as the support of Pt atoms to form a single atom alloy (SAA) catalyst. With the binary catalyst Pt1–0.1Cu@CS, the conversion of the n-heptane after time on stream of 50 h increased to 70.3 %, higher than Pt1@CS (47.3 %). Besides, excessive Cu nanoparticles in the binary catalyst were found rather harmful to the catalysis instead. However, the SAA catalyst Pt1Cu@SAPO-11 showed a poor activity in hydroisomerization compared to Pt1@CS, indicating that the alloy structure should go against the activation of reactant. The roles of Pt atoms and Cu nanoparticles in different catalysts were discussed in detail. The reaction mechanism of hydroisomerization was refined with the different functions of the dual metal sites. This work might be instructive for the design of single atom catalysts combined with metal nanoparticles.

Machine Learning-Enhanced Screening of Single-Atom Alloy Clusters for Nitrogen Reduction Reaction.

The electrochemical nitrogen reduction reaction (eNRR) under ambient conditions is a promising method to generate ammonia (NH3), a crucial precursor for fertilizers and chemicals, without carbon emissions. Single-atom alloy catalysts (SAACs) have reinvigorated catalytic processes due to their high activity, selectivity, and efficient use of active atoms. Here, we employed density functional theory (DFT) calculations integrated with machine learning (ML) to investigate dodecahedral nanocluster-based SAACs for analyzing structure-activity relationships in eNRR. Over 300 nanocluster-based SAACs were screened with all the transition metals as dopants to develop an ML model predicting stability and catalytic performance. Facet sites were identified as optimal doping positions, particularly with late group transition metals showing superior stability and activity. Utilizing DFT+ML, we identified 8 highly suitable SAACs for eNRR. Interestingly, the number of valence d-electrons in dopants proved crucial in screening for eNRR activity. These catalysts exhibited low activity in hydrogen evolution reaction, further enhancing their suitability for eNRR. This successful ML-driven approach accelerates catalyst design and discovery, holding significant practical implications.

Atomically dispersed ruthenium single-atom alloy catalysts enabling efficient iodide oxidation reaction electrolysis in acidic media

Single-atom catalysts exhibit immense potential across diverse reactions, yet their synthesis and stability in acidic environments pose significant challenges. Herein, we introduce a facile one-step hydrothermal approach to fabricate Ru single-atom alloy catalysts (Ru SAAC) through the reaction of Ru and Ti precursors, followed by annealing in an argon atmosphere. Analysis via extended X-ray absorption fine structure spectroscopy and aberration-corrected scanning transmission electron microscopy confirms the atomically dispersed Ru alloy catalyst anchored on a TiO2 support. Remarkably, Ru SAAC demonstrates exceptional electrocatalytic performance in the iodide oxidation reaction (IOR), achieving a benchmark current density of 10 mA/cm2 at a mere voltage of 0.64 V in acidic conditions within a three-electrode electrolyzer setup. Surpassing nanoscale Ru/TiO2 and RuO2/TiO2 counterparts, Ru SAAC exhibits the highest voltage efficiency (84.4%), lowest Tafel slope (36 mV/dec), and lowest overpotential (100 mV) under identical experimental conditions. This method enables facile control over Ru morphology. It enhances the kinetics and thermodynamic favorability of Ru SAAC in acidic media, opening avenues for synthesizing diverse transition metal-based single-alloy catalysts for varied applications.

Carbon‐Encapsulated Single‐Atom Platinum Nickel Alloy for Efficient and Durable Alkaline Hydrogen Oxidation Through Enhanced Charge Polarization

AbstractDeveloping efficient and stable non‐noble metal electrocatalysts for fuel cells is pivotal yet challenging. Herein, a dual‐modulation strategy by integrating a single‐atom alloy (SAA) core with carbon encapsulation to fabricate an advanced NiPtSA@NC catalyst is proposed, which exhibits an impressive specific activity of 82.0 µA cm−2 and superior stability for alkaline hydrogen oxidation reaction (HOR). Experimental and theoretical investigations unveil that the superior HOR performance is due to the enhanced water adsorption and optimized hydrogen binding energy over the dual‐modulated Ni active centers with a moderately downshifted d‐band center, which stems from the charge polarization triggered by the introduced Pt atoms, creating an electron‐rich local environment for Pt atoms while electron‐depletion for Ni atoms, as well as inducing electrons transfer from the metallic core to the carbon shell. This study provides an effective dual modulation strategy to construct robust non‐noble metal electrocatalysts for HOR, guiding the catalyst design of other related catalytic reactions.

Establishing a Robust Nonlinear Targeted Switch for C1 Electroproduction in Atomic Alloy Cox/Pd Bimetallenes.

Establishing a targeted switch for CO2 conversion under electric drive is essential for achieving carbon-balance by enabling selective chemicals. However, engineering the topological assembly of active sites to precisely regulate the competing pathways for various intermediates has been plagued by unclear structure-function relationships. To tailor the CO/formate pathways, herein we established a robust nonlinear targeted switch with tunable active Cox sites integrated into Pd metallene, which involves Co1/Pd single-atom alloy (favoring CO) and Co2/Pd diatomic alloy (favoring formate). Transitioning from Co1/Pd to Co2/Pd atomic alloy bimetallenes resulted in a nonlinear, high-contrast flip in selectivity, surpassing 94% for CO and formate productions in both H-cell and flow cell. Furthermore, the superior selectivity and current efficiency for CO (> 80 %) and formate (> 88%) were consistently maintained at -150 mA cm-2 over continuous 200 h. Theoretical simulations and in-situ spectroscopy analyses unveiled that appropriate adjacent metal site combinations (Pd-Pd, Pd-Co and Co-Co) lead to tunable dz2 band center and a nonlinear shift in preferred adsorption configurations of intermediates, dictating the C1 pathways. Our finding reveals a desired switch in C1 selectivity and robust stability within Cox/Pd system, providing a new perspective for fine-tuning energy conversion processes through specific topological assembly.

Bringing Molecules Together: Synergistic Coadsorption at Dopant Sites of Single Atom Alloys.

Bringing molecules together on a catalytic surface is a prerequisite for bimolecular and recombination reactions. However, in the absence of attractive interactions between reactants, such as hydrogen bonds, this poses a challenge. In contrast, based on density functional theory, we show that coadsorption at active sites of single-atom alloys (SAAs) is favored and that coadsorption is a general phenomenon observed for catalytically relevant adsorbates on a broad range of SAAs under temperature and pressure conditions commonly employed for catalysis. Dopants located in both terrace sites and in step edge defects exhibit a preference for coadsorption, displaying similar periodic trends. Using kinetic Monte Carlo simulations, we compare the reactivity of a model reaction on both a pure metal and an SAA and show that the preference for coadsorption significantly alters the overall reaction energy profile, even when the barriers for the rate-determining elementary step are identical. In our models, the coadsorption preference enhances the catalytic activity of the SAA surface by several orders of magnitude compared to the pure metal. We also report infrared (IR) spectroscopic signatures of coadsorption, which facilitate experimental detection. Analysis reveals that in these systems repulsive lateral interactions between nearby molecules are more than compensated for by the enhanced binding at dopant sites. Among the broad range of systems considered, SAAs containing early transition metals (TMs) exhibit the strongest coadsorption preference, which can be rationalized by assuming the existence of an optimal number of electrons involved in binding. The strong coadsorption preference, together with facile product desorption from early TMs, renders these systems attractive candidates for catalysis. Moreover, these SAAs could open new routes for reduction reactions because coadsorption with hydrogen is favored.

Integrating Active Learning and DFT for Fast-Tracking Single-Atom Alloy Catalysts in CO2-to-Fuel Conversion.

Electrocatalytic carbon dioxide reduction (CO2RR) technology enables the conversion of excessive CO2 into high-value fuels and chemicals, thereby mitigating atmospheric CO2 concentrations and addressing energy scarcity. Single-atom alloys (SAAs) possess the potential to enhance the CO2RR performance by full utilization of atoms and breaking linear scaling relationships. However, quickly screening high-performance metal portfolios of SAAs remains a formidable challenge. In this study, we proposed an active learning (AL) framework to screen high-performance catalysts for CO2RR to yield fuels such as CH4 and CH3OH. After four rounds of AL iterations, the ML model attained optimal prediction performance with the test set R2 of approximately 0.94 and successful prediction was achieved for the binding free energy of *CHO, *COH, *CO, and *H on 380 catalyst surfaces with an accuracy within 0.20 eV. Subsequent analysis of the SAA catalysts' activity, selectivity, and stability led to the discovery of eight previously unexplored SAA catalysts for CO2RR. Notably, the surface activity of Ti@Cu(100), Au@Pt(100), and Ag@Pt(100) shines prominently. Utilizing DFT calculations, we elucidated the complete reaction pathway of the CO2RR on the surfaces of these catalysts, confirming their high catalytic activity with limiting potentials of -0.11, -0.34, and -0.46 eV, respectively, which are significantly lower than those of pure Cu catalysts. The results showcase the exceptional predictive prowess of AL, providing a valuable reference for the design of CO2RR catalysts.

Revisiting the role of foreign atoms in [formula omitted] reduction on CuSn single-atom surface alloys

The electrochemical CO2 reduction is a promising process for capturing the emitted carbon dioxide by converting CO2 into value-added chemicals. Although copper-based catalysts have a unique ability to produce multi-carbon products, they suffer from poor selectivity. Copper-based alloys and, in particular, single atom alloys, hold promise for fine-tuning the selectivity of CO2 reduction reaction. In this study, we applied the grand canonical density functional theory in combination with the implicit solvent to model CO2 electroreduction with the formation of CO and HCOO− on copper and highly diluted copper-tin alloys. We demonstrate that the insertion of a substitutional Sn atom introduces a destabilization effect for all intermediates and completely disrupts the adsorption positions of the CO, H, and H/CO2 co-adsorption. However, the influence of Sn on intermediate adsorption energies is primarily localized in its immediate vicinity. We demonstrate that sparsely distributed single Sn atoms do not account for the experimentally observed significant reduction in formate and hydrogen generation across the entire Sn-substituted Cu surface. This discrepancy underscores the need to reevaluate the proposed surface structure and the nature of the active sites on CuSn single-atom surface alloys.

Engineering intricacies of implementing single-atom alloy catalysts for low-temperature electrocatalytic CO2 reduction

Engineering intricacies of implementing single-atom alloy catalysts for low-temperature electrocatalytic CO2 reduction

Single Atom Catalyst for Nitrate-to-Ammonia Electrochemistry.

Various life forms suffer from the negative effects of nitrate when it accumulates in water bodies, which is a major concern in the present day. The removal of nitrate from water bodies is a critical challenge, and the most effective method to achieve that is to change it into ammonia. Ammonia is a clean energy source and a vital input for the fertilizer industry. The Haber-Bosch process, which dominates the industrial production of ammonia, requires a lot of energy. A more sustainable way to produce ammonia is to use nitrate-contaminated water and reduce it to ammonia through electrocatalysis. This review is constituted of amalgamated articles featuring unique conditions that affect the productivity and activity of the transition metal single atom catalyst (TNMSAC) for the electrocatalytic nitrate reduction to ammonia (NRA) reaction. It explores factors such as nitrate ion adsorption, the characteristics of the central electroactive transition metal, the type of coordinating atoms, the impact of potential on stability, and the interplay among single atoms on the selectivity and yield of ammonia gas. In addition, this review also covers advanced concepts such as dual-atom catalysts, dual single atom catalysts, and single atom alloys. The review will provide valuable guidance for enhanced comprehension and strategic designing of TNMSAC for the electrocatalytic conversion of NRA, which will contribute to achieving a green ammonia economy.

Hydrogen activation by rhodium under the cover of a copper oxide thin film

The activation of reactants by catalytically active metal sites at metal-oxide interfaces is important for understanding the effect of metal-support interactions on nanoparticle catalysts and for tuning activity and selectivity. Using a combined experimental and theoretical approach, we studied the activation of H2 and the effect of CO poisoning on isolated Rh atoms completely or partially covered by a copper oxide (Cu2O) thin film. Temperature-programmed desorption (TPD) experiments conducted in ultra-high vacuum (UHV) show that neither a partially nor a fully oxidized Cu2O layer grown on a Rh/Cu(111) single-atom alloy can activate hydrogen in UHV. However, in situ ambient pressure X-ray photoelectron spectroscopy (AP-XPS) experiments performed at elevated H2 pressures reveal that Rh significantly accelerates the reduction of these Cu2O thin films by hydrogen. Remarkably, the fastest reduction rate is observed for the fully oxidized sample with all Rh sites covered by Cu2O. Both TPD and AP-XPS data demonstrate that these covered Rh sites are inaccessible to CO, indicating that Rh under Cu2O is active for H2 dissociation but cannot be poisoned by CO. In contrast, an incomplete oxide film leaves some of the Rh sites exposed and accessible to CO, and hence prone to CO poisoning. Density functional theory calculations demonstrate that unlike many reactions in which hydrogen activation is rate limiting, the rate-determining step in the dissociation of H2 on thin-film Cu2O with Rh underneath is the adsorption of H2 on the buried Rh site, and once adsorbed, the dissociation of H2 is barrierless. These calculations also explain why H2 can only be activated at higher pressures. Together, these results highlight how different the reactivity of atomically dispersed Rh in Cu can be depending on its accessibility through the oxide layer, providing a way to engineer Rh sites that are active for hydrogen activation but resilient to CO poisoning.

Unveiling the Composition-Dependent Catalytic Mechanism of Pt-Ni Alloys for Oxygen Reduction: A First-Principles Study.

Unveiling the composition-dependent catalytic mechanism of Pt-based alloy cathodes for the oxygen reduction reaction (ORR) helps improve the proton exchange membrane fuel cells. Using density functional theory calculations, this study investigates the ORR catalytic performance of the Pt-Ni system with various compositions (1.00, ∼0.99, 0.75, 0.50, 0.25, ∼0.01, and 0.00). The ordered solid solution PtNi3(111) system shows activity comparable to Pt(111) and is cost-effective. The Ni1/Pt(111) system, featuring a single Ni atom on the Pt(111) surface as a surface single-atom alloy (SSAA), demonstrates the highest activity with an overpotential of only 0.28, which could be further reduced to 0.21 V by decreasing the surface Ni concentration to 1/16 monolayer coverage. The predicted high activity of Ni1/Pt(111) is confirmed when considering factors such as the implicit solution environment, constant potential conditions, and protonation capability. Moreover, surface-adsorbed oxygen species driven by reaction conditions stabilize these single Ni atoms of Ni1/Pt(111) by preventing segregation and dissolution processes, thereby exhibiting a dual functionality. This study reveals the composition dependence of Pt-based alloys and highlights the stability mechanisms of SSAA catalysts during the ORR.

Manipulation in local coordination of platinum single atom enables ultrahigh mass activity toward hydrogen evolution reaction

Atomic-engineering of noble metal into single-atom electrocatalysts with well-defined active sites has been considered as an effective approach to enhance the mass-activity towards hydrogen evolution reaction (HER), crucial for the practical implementation of this sustainable technology. Herein, we devise a metallic-coordination strategy via a facile one-step pyrolysis method, for the atomic isolation of a small amount of platinum (Pt, 0.45 wt%) atoms in the surface of nickel (Ni) nanoparticles (Pt1@Ni) encapsulated into nitrogen-doped carbon nanotubes (Pt1@Ni/NCNT). Such a Pt1@Ni/NCNT single-atom alloy catalyst exhibits a record-high and all-round superior HER performance including mass-activity (up to 350.7 A mgPt−1@η150), stability (>50 h at 100 mA cm−2), pH-tolerance by comparison with Pt1@NC. Our density functional theory calculations combined with in situ Raman spectroscopic studies reveal a synergistic dual-active-site catalytic mechanism, involving the fast hydrogen spillover effect on coordinated Ni supports and accelerated water dissociation in acidic and alkaline medium, respectively. A strong electronic hybridization of 5d orbital of alloyed Pt and 3d orbital of Ni atoms modulates the d band center of Pt, which not only boosts HER activity but also stabilizes Pt single atoms. Due to the double protecting strategy from strong anchoring effect in Ni support and chemically stable NCNT shell, a robust stability is achieved for Pt1@Ni/NCNT hierarchal catalyst. Our findings open up a new avenue to substantially tailor the activity of surface Pt atoms for the design of highly efficient and durable noble metal-based catalysts.

Screening of Silver-Based Single-Atom Alloy Catalysts for NO Electroreduction to NH3 by DFT Calculations and Machine Learning.

Exploring NO reduction reaction (NORR) electrocatalysts with high activity and selectivity toward NH3 is essential for both NO removal and NH3 synthesis. Due to their superior electrocatalytic activities, single-atom alloy (SAA) catalysts have attracted considerable attention. However, the exploration of SAAs is hindered by a lack of fast yet reliable prediction of catalytic performance. To address this problem, we comprehensively screened a series of transition-metal atom doped Ag-based SAAs. This screening process involves regression machine learning (ML) algorithms and a compressed-sensing data-analytics approach parameterized with density-functional inputs. The results demonstrate that Cu/Ag and Zn/Ag can efficiently activate and hydrogenate NO with small Φmax(η), a grand-canonical adaptation of the Gmax(η) descriptor, and exhibit higher affinity to NO over H adatoms to suppress the competing hydrogen evolution reaction. The NH3 selectivity is mainly determined by the s orbitals of the doped single-atom near the Fermi level. The catalytic activity of SAAs is highly correlated with the local environment of the active site. We further quantified the relationship between the intrinsic features of these active sites and Φmax(η). Our work clarifies the mechanism of NORR to NH3 and offers a design principle to guide the screen of highly active SAA catalysts.

Electrocatalytic nitrite reduction to ammonia on isolated bismuth alloyed ruthenium

Electrochemical reduction of NO2− to NH3 (NO2−RR) is recognized as an appealing approach for achieving renewable NH3 synthesis and waste NO2− removal. Herein, we report isolated Bi alloyed Ru (Bi1Ru) as an efficient NO2−RR catalyst. Theoretical calculations and in situ electrochemical measurements reveal the creation of Bi1-Ru dual sites which can remarkably promote NO2− activation and suppress proton adsorption, while accelerating the NO2−RR protonation energetics to render a high NO2−-to-NH3 conversion efficiency. Remarkably, Bi1Ru assembled in a flow cell delivers an NH3 yield rate of 1901.4 μmol h−1 cm−2 and an NH3-Faradaic efficiency of 94.3% at an industrial-level current density of 324.3 mA cm−2. This study offers new perspectives for designing and constructing p-block single-atom alloys as robust and high-current-density NO2−RR catalysts toward the ammonia electrosynthesis.

Electrochemical Nitrate Reduction to Ammonia on AuCu Single-atom Alloy Aerogels under Wide Potential Window.

Electrocatalytic nitrate reduction to ammonia (NO3RR) is very attractive for nitrate removal and ammonia production in industrial processes. However, the nitrate reduction reaction is characterized by intense hydrogen competition at strong reduction potentials, which greatly limits the Faraday efficiency at strong reduction potentials. Herein, we reported an AuxCu single-atom alloy aerogels (AuxCu SAAs) with three-dimensional network structure with significant nitrate reduction performance of Faraday efficiency (FE) higher than 90% over a wide potential range (0 ~ -1 VRHE). The FE of the catalyst was close to 100% at a high reduction potential of -0.8 VRHE, accompanying with NH3 yield reaching 6.21 mmol h-1 cm-2. More importantly, the catalyst maintained a long-term operation over 400 h at 400 mA cm-2 for the NO3RR using a continuous flow system in a H-cell. Experimental and theoretical analysis demonstrate that the catalyst can lower the energy barrier for the hydrogenation reaction of *NO2, leading to a rapid consumption of the generated *H, facilitate the hydrogenation process of NO3RR, and inhibit the competitive HER at high overpotentials, which efficiently promotes the nitrate reduction reaction, especially in industrial applications.