Electromagnetic Field Simulation Research Articles

Domain Decomposition and Model Order Reduction for Electromagnetic Field Simulations in Carbon Fiber Composite Materials

Domain Decomposition and Model Order Reduction for Electromagnetic Field Simulations in Carbon Fiber Composite Materials

Analysis of braking performance and heat dissipation characteristics of multi-disc magnetorheological brake with an inner water-cooling mechanism

In order to improve the braking performance and reduce temperature rising of the magnetorheological (MR) brake during working condition, a multi-disc MR brake with an inner water-cooling mechanism is developed in this paper. The effective damping gaps are increased to eight sections by the four brake discs, which enhance the braking performance. An inner water-cooling mechanism is designed in the MR brake to improve the heat dissipation. The structure and working principle of the multi-disc MR brake are introduced, and the mathematical model of the braking torque and transient temperature field are established. The electromagnetic field simulation and the heat-flow coupling simulation are conducted by COMSOL software. A test rig is setup to investigate the braking performance and heat dissipation characteristics. The experimental results indicate the maximum braking torque can reach 96.24 N·m. Additionally, after 20 s of continuous braking, the temperature rise of the MR brake with cooling water input is lower than that without cooling water input. Compared with the braking torque reduction without cooling water input, the braking torque reduction with cooling water input is smaller. It is shown that cooling structures in the MR brake have a positive impact on improving braking performance.

Room temperature optical coupling of neodymium ions to photonic crystal L3 cavity in gallium nitride semiconductor

We demonstrate the optical coupling of implanted neodymium (Nd) ions in a photonic crystal (PhC)-L3 cavity on GaN at RT. The structure of the PhC-L3 cavity is designed by the electromagnetic field simulation to enhance the 4 F 3/2–4 I 9/2 and 4 F 3/2–4 I 11/2 transitions (916 and 1107 nm) in Nd3+. The highest enhancement ratio of 20-fold is achieved under our measurement conditions by the enhancement of spontaneous emission rate due to the Purcell effect in addition to the improvement of light collection efficiency. These results pave the way for the development of Ln-doped GaN based quantum light–matter interface and nanophotonics.

Amorphous/Graphitic carbon phase engineering of Corrosion-Resistant Fe@C Core-Shell nanowires for optimized dipole polarization and enhanced microwave absorption

The study of designing and developing ferromagnetic nanocomposites with both microwave absorption (MA) and corrosion protection properties through microscopic heterogeneous interfacial engineering and crystal phase engineering remains challenging. In this study, Fe@C core–shell nanowires (FCNWs) are obtained by magnetic field-controlled in situ reduction method and annealing process to de-regulate the carbon shell thickness and carbon morphology. The enhancement of Fe-C heterogeneous relative interfacial effects and dielectric/magnetic response is revealed using density functional theory and simulated electromagnetic field distribution, and the modulation of the amorphous carbon/graphitic carbon ratio achieves the enhancement of dipole polarization in the low-frequency region. The FCNWs absorber had a minimum reflection loss (RLmin) of −47.6 dB at a thickness of 4.9 mm, and the maximum effective absorption bandwidth (EABmax) was achieved at 5.5 mm up to 4.0 GHz. In addition, the shielding effect of the graphitic carbon shell on the corrosion medium and the addition of additional electron conduction pathways allow the FCNWs absorber to obtain smaller corrosion currents and larger polarization resistances compared to Fe nanowires. Thus, modulation of atomic-scale heterogeneous interfaces and crystal phases has great potential in modulating the dielectric response.

Electromagnetic field simulation modeling method and distribution characteristics of electric vehicle wireless charging system

In recent years, wireless charging technology for electric vehicles has gained significant attention. To accurately analyze the distribution characteristics of the electromagnetic field during the wireless charging process of electric vehicles, a finite element-based electromagnetic analysis method was employed. Applied in the commercial simulation software, the electromagnetic environment of the resonant coil and electric vehicle model was simulated under high-power charging conditions, resulting in an overall electromagnetic field distribution for the electric vehicle. The results indicated that within the coil region, the magnetic induction intensity in the central area of the coil was zero, and it increased as the distance from the center of the coil grew. Outside the coil region, the magnetic induction intensity gradually decreased. The electric field intensity of the resonant coil was maximum in the central area of the coil, and it weakened as the distance from the center of the coil increased. When a magnetic shielding resonant coil was used, the electromagnetic field was confined between the shielding materials, and the magnetic field rapidly attenuated on both sides of the magnetic shield. The electromagnetic field energy of the electric vehicle body was mainly concentrated at the bottom of the vehicle near the coil. When the coil was located in the front of the car body, the maximum electric field intensity distribution in the car body was 8.50 V/m, and the maximum magnetic induction intensity was 0.024 μT. When the coil was located in the middle of the car body, the maximum electric field intensity was 2.31 V/m, the maximum magnetic induction intensity was 0.019 μT. As the distance from the coil position increased, the energy weakened.

Modelling and validating of constitutive relationship between uniaxial stress and AC electromagnetic field

The phenomenon of stress-induced alteration in the magnetic field of ferromagnetic materials and certain conductive non-ferromagnetic materials is herein referred to as the mechano-electromagnetic effect (MEME). It has great application potential in nondestructive testing of stress. However, the physical mechanism of MEME is still unclear, and most stress-magnetic field correlation models are phenomenological and dependent on testing conditions, making them difficult to apply in measurements. In this paper, a constitutive model of MEME was established by assuming that the underlying physical mechanism of MEME is an intrinsic response of material to stress through changes in permeability and conductivity. Based on the constitutive models of stress–magnetic permeability and stress–conductivity, the uniaxial stress–AC electromagnetic-field constitutive model was proposed and validated. In the uniaxial tensile experiment of Q235 specimen, the prediction results of the model agree well with the experimental findings with satisfactory accuracy and generality. The constitutive model provides a new interpretation of the mechanism of MEME and a new method for simulation of stress-affected electromagnetic field.

Multi-channel vortex beam based on single layer transmission-type metal metasurface

We design a transmission type flexible metasurface which operates at 0.1 THz. The metasurface consists of a polyimide substrate and a metallic copper film. Using the geometric phase principle, four vortex beams with different channels and different topological charges are generated under the linearly polarized beam incident. Through three-dimensional electromagnetic field simulation and experimental tests, it is proved that the designed metasurface can generate multi-channel vortex beams, where the topological charges of the vortex beam are ± 1 and ± 2. The metasurface has high transmittance in the frequency band of 0.092THz to 0.106THz, 0.202THz to 0.283THz, 0.318THz to 0.345THz, and so on, which can generate multi-channel vortex beams at multiple frequency bands. Metasurfaces designed based on this method can be applied in optical communication.

A novel resonator cavity microwave sensor for high-temperature blade tip clearance measurement

The blade tip clearance is the key to efficiency and safety of rotating engines with accurate and real-time measurement. Existing microwave sensors can only withstand 900 °C. This paper introduces a novel resonant cavity sensor, withstanding up to 1300 °C. Using a high-impedance compensation method, the high-temperature section for the sensor has been designed. The sensor’s structure is designed based on the principle of electromagnetic field superposition and optimized by electromagnetic field simulation. A phase compensation method of transmission path based on dual-frequency technology has been proposed. Prototypes are developed and the performance tests are completed. Results show a monotonic relationship between the phase difference measurements and actual blade tip clearance values. The novel sensor is suitable for dynamic measurement of blade tip clearance. Additionally, the sensor operates reliably at high temperatures up to 1300 °C. The measurement deviation of blade tip clearance between high-temperature and room-temperature is always within ±10 %.

Surface dielectric resonator for in vivo EPR measurements

This research report describes a novel surface dielectric resonator (SDR) with a flexible connector for in vivo electron paramagnetic resonance (EPR) spectroscopy. Contrary to the conventional cavity or surface loop-gap resonators, the newly developed SDR is constructed from a ceramic dielectric material, and it is tuned to operate at the L-band frequency band (1.15 GHz) in continuous-wave mode. The SDR is designed to be critically coupled and capable of working with both very lossy samples, such as biological tissues, and non-lossy materials. The SDR was characterized using electromagnetic field simulations, assessed for sensitivity with a B1 field-perturbation method, and validated with tissue phantoms using EPR measurements. The results showed remarkably higher sensitivity in lossy tissue phantoms than the previously reported multisegment surface-loop resonators. The new SDR can provide potential new insights for advancements in the application of in vivo EPR spectroscopy for biological measurements, including clinical oximetry.

Design of Magnetic Coupler for AUV Wireless Charging and Its Electromagnetic Field Simulation

The magnetic coupler is one of the important components of wireless charging system, and its coupling coefficient directly influences the energy transmission efficiency. This paper designs a magnetic coupler for Autonomous Underwater Vehicle(AUV) wireless charging in the marine environment. Firstly, the eddy current effect during energy transmission of the magnetic coupler under seawater conditions is analyzed, and the equivalent model of the wireless charging system is compensated and corrected. Then, the genetic-BP neural network algorithm is used to determine the relevant structural parameters of the magnetic coupler. Finally, the electromagnetic field simulation analysis of the offset phenomenon between the transmitting and receiving sides of the magnetic coupler is carried out based on ANSYS MAXEWLL software.The results show that the coupling coefficient of the magnetic coupler under normal operation is 0.87, and if there is a 10mm radial offset (or 5 ° circumferential offset), the coupling coefficient will decrease to 0.74 (or 0.78), which provides a reference basis for the subsequent offset fault-tolerant design of the AUV wireless charging system.

3-D forward modeling of shale gas fracturing dynamic monitoring using the borehole-to-ground transient electromagnetic method

The borehole-ground transient electromagnetic method enhances the detection range and resolution by placing the transmitter electrode within the borehole, allowing for close-proximity excitation of subsurface targets and compensating for the shortcomings of traditional ground-based methods. Utilizing an unstructured vector finite element method combined with a second-order backward Euler variable time-stepping difference scheme and the MUMPS solver, we have achieved three-dimensional forward modeling simulation of the transient electromagnetic field for a borehole-ground electric source. Based on the validation of its accuracy, we analyzed the effectiveness of this method for dynamic monitoring of shale gas reservoir fracturing. Through forward modeling, we examined the characteristics of the radial electric field response during shale gas reservoir fracturing monitoring and evaluated the effectiveness of the borehole-ground TEM method in dynamic monitoring of shale gas reservoirs. The research results indicate that this method can meet the requirements for reservoir fracturing dynamic monitoring and has a promising application prospect.

Magnetic Design and Electromagnetic Field Simulation of Downhole Turbine Generator

With the increasing difficulty of oil and gas resources exploration and the increase of drilling operations in complex geological environments, the challenges faced by oil drilling operations are also increasing. With the continuous improvement of the intelligence of MWD/LWD drilling technology and downhole instruments, the demand for electric energy is also increasing. In order to ensure the normal operation of the equipment and the accurate acquisition of data, this paper designs a new type of external rotor downhole turbine generator, and designs the structure and parameters of the turbine generator. Finally, Ansoft Maxwell software is used to simulate and analyze the electromagnetic field of the generator. The results show that the induced electromotive force and load current waveform obtained by electromagnetic field simulation analysis have good sinusoidality. At the rated speed of 2500rpm, the effective value of the output line voltage of the turbine generator is about 49.1V, the effective value of the line current is about 10.99A, and the output power is about 841.17W, which meets the design requirements. The research has certain guiding significance for practical engineering.

Propagation Characteristics and Magnetic Field Distribution of Rotating Magnet-Based Mechanical Antenna in the Air-Seawater-Seabed Three-Layer Medium

Aiming at the application requirements of underwater cross-domain communication, based on the equivalent relationship between the rotating permanent magnet and the orthogonal time-varying current loop, this paper establishes an air-seawater-seabed three-layer medium model and analyzes the magnetic field distribution and propagation characteristics of the rotating permanent magnet-based mechanical antenna (RMBMA). Based on the electromagnetic field simulation software FEKO, the influence of vertical rotation and horizontal rotation of RMBMA on the radiation magnetic field is analyzed. The magnetic field distribution and magnetic field attenuation characteristics of RMBMA at different depths are obtained by simulation. The influence of RMBMA operating frequency and magnetic moment on the propagation characteristics is studied. The research shows that the horizontal rotation of the magnetic source is better than the vertical rotation in the long-distance underwater communication. When the magnetic source and the receiving point are close to the interface of the medium, the magnetic field strength and the propagation distance can be relatively increased. With appropriate frequency and magnetic moment, the magnetic field strength and communication distance can be further increased.

Optimal design and experimental study of comb-type disc magnetorheological brake

The magnetic circuit method was adopted in this paper to design a comb-type disc magnetorheological brake for electric vehicles, aiming to solve the problem of the existing magnetorheological brake with large volume and limited braking torque. A mathematical model of braking torque was established. The effects of different structural dimensions on the performance of the brake were investigated through electromagnetic field simulation. The brake structure was optimized using PSO, which reduced the mass by 19.17 % and increased the torque by 6.58 %, and its performance was experimentally verified. The results showed that the brake produced a braking torque of 334 N·m at a saturated current of 3.6 A, with a response time ranging from 134 to 275 ms. After 10 braking cycles, the maximum braking torque remained above 94.5 % of the initial value. The source of heat was mainly located at the comb teeth portion of the brake disc.

A synthetic diagnostics platform for microwave imaging diagnostics in tokamaks

Interpreting experimental diagnostics data in tokamaks, while considering non-ideal effects, is challenging due to the complexity of plasmas. To address this challenge, a general synthetic diagnostics (GSD) platform has been established that facilitates microwave imaging reflectometry and electron cyclotron emission imaging. This platform utilizes plasma profiles as input and incorporates the finite-difference time domain, ray tracing and the radiative transfer equation to calculate the propagation of plasma spontaneous radiation and the external electromagnetic field in plasmas. Benchmark tests for classical cases have been conducted to verify the accuracy of every core module in the GSD platform. Finally, 2D imaging of a typical electron temperature distribution is reproduced by this platform and the results are consistent with the given real experimental data. This platform also has the potential to be extended to 3D electromagnetic field simulations and other microwave diagnostics such as cross-polarization scattering.

Ultra-broadband and wide-angle plasmonic light absorber based on all-dielectric gallium arsenide (GaAs) metasurface in visible and near-infrared region

High-performance and cost-effective broadband light absorbers are crucial for various optical applications, including solar energy harvesting, thermophotovoltaic systems, and integrated photoelectric devices. In this study, an ultra-broadband and wide-angle plasmonic light absorber (PLA) based on an all-dielectric gallium arsenide (GaAs) metasurface in the visible and near-infrared regions is proposed and numerically investigated. The unit-cell of the proposed PLA is consisted of all-dielectric GaAs cylinder resonator (CR) adhered on an ultra-thin GaAs spacer layer backed with a tungsten (W) substrate. Numerical simulation results show that the absorption peak of the proposed PLA is up to 99.85 %, 99.9 % and 99.98 % at 0.452 μm, 0.712 μm and 1.596 μm, respectively. In addition, the ultra-broadband strong absorption of over 90 % also can be achieved from 0.39 μm to 2.09 μm with a relative bandwidth of 137.1 %. The ultrabroadband strong absorption of the proposed PLA is further demonstrated by the equivalent circuit model (ECM), which displays excellent agreement with the results of the full-wave numerical simulation performed using the finite element method (FEM). The simulated electromagnetic (EM) field distributions reveal that the ultra-broadband strong absorption of the designed PLA is mainly from the excited propagating surface plasmon (PSP), located surface plasmon (LSP), cavity resonance modes combined with coupling effect between adjacent CRs. The proposed PLA is also polarization-insensitive and wide incident angles for both transverse electric (TE) and transverse magnetic (TM) modes. The absorption properties of the designed PLA can be adjusted by varying geometric parameters of the unit-cell. The PLA achieves a remarkable short-circuit current density of over 64.75569 mA/cm2 and exhibits nearly perfect solar energy trapping due to the effective coupling of multiple resonances, resulting in enhanced photovoltaic performance. Thus, the proposed PLA can be potential application in the photodetectors, thermal imaging, and solar energy harvesting devices.

Construction of ZnO/Ni@C hollow microspheres as efficient electromagnetic wave absorbers with thin thickness and broad bandwidth

Ingenious microstructure design and rational composition collocation have been proved to be an effective strategy for developing efficient electromagnetic wave (EMW) absorbers. It would be promising to fabricate a hollow structured composite integrating multiple loss mechanisms (conduction, magnetic, and polarization losses) for excellent EMW absorption. Herein, a novel dielectric-magnetic compound of ZnO/Ni@C hollow microsphere was prepared through hydrothermal reactions followed by an in-situ chemical vapor deposition (CVD). In this ternary composite, abundant ZnO/Ni heterostructures formed the hollow microsphere skeletons and provided unique Schottky junctions, which endowed the composite with improved impedance matching and strong polarization loss. Meanwhile, the amorphous-polycrystalline carbon layer deposited on the surface of each microsphere enhanced the conduction and interfacial polarization losses. In addition, the magnetic Ni nanoparticles induced magnetic loss. Benefiting from the synergistic effect of the hollow structure and multiple loss mechanisms, the ternary composite exhibits an effective absorption bandwidth as wide as 6.55 GHz at a thickness of only 1.85 mm, accompanied by a minimum reflection loss of –39.8 dB. Besides, the radar cross-section and the electromagnetic field simulation further verify the superior EMW absorption performance of the composites. Our work provides a new reference for the fabrication of dielectric-magnetic ternary hollow microspheres as EMW absorbers with thin thickness and broad bandwidth.

Coupled Numerical Simulation of Electromagnetic and Flow Fields in a Magnetohydrodynamic Induction Pump

Coupled Numerical Simulation of Electromagnetic and Flow Fields in a Magnetohydrodynamic Induction Pump

Analogy between a moving line source illuminating a metallic wire and Compton scattering experiment

AbstractThis paper presents an electromagnetic analysis of a moving infinitely long line source illuminating an infinitely long metallic wire at rest. The study uses the full‐wave numerical finite difference time domain (FDTD) method, which is based on the spatial and temporal discretization of Maxwell's equations. Movement is computed within the FDTD technique by varying the position of the line source at each time loop. An analogy is proposed between the wavelength spectrum of the simulated electromagnetic field and the Compton scattering experiment. A good agreement is obtained between theoretical analysis, numerical results, and Compton experimental data.

The enhancing energy efficiency in hyperthermia treatment: a frequency-reconfigurable L-Shape antenna design and analysis

The object of research is a frequency-reconfigurable L-Shape antenna. This paper presents an innovative study focusing on the design and analysis of a frequency-reconfigurable L-Shape antenna with a specific application in Hyperthermia Treatment. The antenna, operating in the frequency range of 2.5 to 8 GHz, utilizes a varactor to achieve agility and simplify design, thereby reducing component count. Constructed with a Roggers RT5880 (lossy) substrate, the L-Shape configuration ensures optimal performance. The incorporation of a single varactor, acting as a junction capacitance, not only enables straightforward tuning but also contributes to enhanced energy efficiency by reducing overall power consumption in the reconfigurable antenna system. The study employed CST Microwave Studio's 3D Electromagnetic field simulation software for time domain solver-based simulations, with validation conducted using the frequency domain solver. Results from the simulations showcase the antenna's performance at different frequency states. At the tuning state frequency of 2.7 GHz, the antenna exhibits an impressive gain of 1.905 dB and a directivity of 7.530 dB. Similarly, at the tuning state frequency of 6.89 GHz, the gain is measured at 6.806 dB with a directivity of 7.490 dB. The proposed L-Shape antenna design not only demonstrates significant potential for Hyperthermia Treatment, allowing targeted heating within the 2.5 to 8 GHz frequency range but also aligns with the multidisciplinary focus of medical science. This contribution reflects the commitment to advancing medical science through original research, fostering innovation, and promoting energy-efficient solutions with practical applications in clinical settings.