Sulfur Mustard Simulant Research Articles

Microwave-assisted hydrothermal synthesis of highly dispersed cerium–zirconium solid solution on Ti3C2Tx nanosheets as an efficient decontamination towards sulfur mustard simulants

The microwave-assisted hydrothermal method has facilitated the straightforward and efficient production of nanoscale CexZr1−xO2/Ti3C2Tx composites. This technique has greatly shortened the synthesis time several hours required by conventional hydrothermal method to merely 10 min. Due to the unique mechanism of microwave-hydrothermal synthesis, composites with excellent crystallinity, uniform particle size, and superior degradation capabilities can be obtained without calcination. Our investigation systematically explores the influence of various factors including mineralizer concentration, dispersant types, synthesis duration, cerium-to-zirconium ratio, as well as MXene content on the material properties. Optimal degradation of 2-chloroethyl ethyl sulfide (2-CEES), sulfur mustard simulants, is achieved using PEG1000 as the dispersant, a cerium-to-zirconium ratio of 1:2, along with 15 mL of MXene, resulting in a remarkably short half-life of only 6.5 min. Furthermore, it is confirmed that the incorporation of cerium atoms into ZrO2 lattice, forming a solid solution that is deposited onto the interlayer and surface of Ti3C2Tx nanosheets, with the composite particles measuring approximately 5.01 nm. The reduced size and increased specific surface area, coupled with the synergistic effects of oxygen vacancies and acid-base sites, ultimately contribute to the hydrolysis and elimination reactions occurring on 2-CEES. This research offers fresh perspectives on the development of novel materials for the degradation of chemical warfare agents.

Room Temperature Chemiresistive Sensing of Sulfur Mustard Simulant by 2D Conjugated MOF Surface Modification

Room Temperature Chemiresistive Sensing of Sulfur Mustard Simulant by 2D Conjugated MOF Surface Modification

Effect of wavelength and liquid on formation of Ag, Au, Ag/Au nanoparticles via picosecond laser ablation and SERS-based detection of DMMP.

The present study investigates the effects of input wavelength (1064, 532, and 355 nm) and surrounding liquid environment (distilled water and aqueous NaCl solution) on the picosecond laser ablation on silver (Ag), gold (Au), and Ag/Au alloy targets. The efficacy of the laser ablation technique was meticulously evaluated by analyzing the ablation rates, surface plasmon resonance peak positions, and particle size distributions of the obtained colloids. The nanoparticles (NPs) were characterized using the techniques of UV-visible absorption, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. Furthermore, NPs of various sizes ranging from 6 to 35 nm were loaded onto a filter paper by a simple and effective drop-casting approach to achieve flexible surface-enhanced Raman spectroscopy (SERS) substrates/sensors. These substrates were tested using a simple, portable Raman device to identify various hazardous chemicals (malachite green, methyl salicylate, and thiram). The stability of the substrates was also systematically investigated by determining the decay percentages in the SERS signals over 60 days. The optimized SERS substrate was subsequently employed to detect chemical warfare agent (CWA) simulants such as methyl salicylate (a CWA simulant for sulfur mustard) and dimethyl methyl phosphonate (has some structural similarities to the G-series nerve agents) at different laser excitations (325, 532, and 633 nm). A notably higher SERS efficiency for CWA simulants was observed at a 325 nm Raman excitation. Our findings reveal that a higher ablation yield was observed at IR irradiation than those obtained at the other wavelengths. A size decrease of the NPs was noticed by changing the liquid environment to an electrolyte. These findings have significant implications for developing more efficient and stable SERS substrates for chemical detection applications.

Ultrathin WO3 Nanosheets/Pd with Strong Metal-Support Interactions for Highly Sensitive and Selective Detection of Mustard-Gas Simulants.

Exposure to mustard gas can cause damage or death to human beings, depending on the concentration and duration. Thus, developing high-performance mustard-gas sensors is highly needed for early warning. Herein, ultrathin WO3 nanosheet-supported Pd nanoparticles hybrids (WO3 NSs/Pd) are prepared as chemiresistive sulfur mustard simulant (e.g., 2-chloroethyl ethyl sulfide, 2-CEES) gas sensors. As a result, the optimal WO3 NSs/Pd-2 (2 wt % of Pd)-based sensor exhibits a high response of 8.5 and a rapid response/recovery time of 9/92 s toward 700 ppb 2-CEES at 260 °C. The detection limit could be as low as 15 ppb with a response of 1.4. Moreover, WO3 NSs/Pd-2 shows good repeatability, 30-day operating stability, and good selectivity. In WO3 NSs/Pd-2, ultrathin WO3 NSs are rich in oxygen vacancies, offer more sites to adsorb oxygen species, and make their size close to or even within the thickness of the so-called electron depletion layer, thus inducing a large resistance change (response). Moreover, strong metal-support interactions (SMSIs) between WO3 NSs and Pd nanoparticles enhance the catalytic redox reaction performance, thereby achieving a superior sensing performance toward 2-CEES. These findings in this work provide a new approach to optimize the sensing performance of a chemiresistive sensor by constructing SMSIs in ultrathin metal oxides.

Measuring Mass Transfer of n-Hexane and 2-Chloroethyl Ethyl Sulfide in Sorbent/Polymer Fiber Composites Using a Volumetric Adsorption Apparatus.

The integration of metal-organic frameworks (MOFs) into composite systems serves as an effective strategy to increase the processability of these materials. Notably, MOF/fiber composites have shown much promise as protective equipment for the capture and remediation of chemical warfare agents. However, the practical application of these composites requires an understanding of their mass transport properties, as both mass transfer resistance at the surface and diffusion within the materials can impact the efficacy of these materials. In this work, we synthesized composite fibers of MOF-808 and amidoxime-functionalized polymers of intrinsic microporosity (PIM-1-AX) and measured the adsorption and mass transport behavior of n-hexane and 2-chloroethyl ethyl sulfide (CEES), a sulfur mustard simulant. We developed a new Fickian diffusion model for cylindrical shapes to fit the dynamic adsorption data obtained from a commercial volumetric adsorption apparatus and found that mass transport behavior in composite fibers closely resembled that in the pure PIM fibers, regardless of MOF loading. Moreover, we found that n-hexane adsorption mirrors that of CEES, indicating that it could be used as a structural mimic for future adsorption studies of the sulfur mustard simulant. These preliminary insights and the new model introduced in this work lay the groundwork for the design of next-generation composite materials for practical applications.

{SeO2(OH)} Bridging Lanthanide-Containing Antimono-Seleno-Tungstates.

A series of new trigonal pyramidal {SeO2(OH)} bridging lanthanide-containing antimono-seleno-tungstates [H2N(CH3)2]8Na8Cs4H9[Ln2SeW4O11(OH)(H2O)4(SbW9O33)(SeW9O33)(Se1/2Sb1/2W9O33)]2·32H2O [Ln = Tb (1), Dy (2), Ho (3), Er (4)] have been prepared by the synthetic strategy of simultaneously using the antimonotungstate precursor and simple material in an acidic aqueous solution and structurally characterized by single-crystal X-ray diffraction, powder X-ray diffraction, IR spectrometry, and thermogravimetric analysis. Their molecular structures contain an unprecedented hexameric polyoxoanion [Ln2SeW4O11(OH)(H2O)4(SbW9O33)(SeW9O33)(Se1/2Sb1/2W9O33)]229- constituted by two equivalent trimeric subunits Ln2W4O9(H2O)4(SbW9O33)(SeW9O33)(Se1/2Sb1/2W9O33) bridged via two μ2-{SeO2(OH)} linkers. Furthermore, the catalytic oxidation of various aromatic sulfides and sulfur mustard simulant 2-chloroethyl ethyl sulfide (CEES) by compound 3 as the heterogeneous catalyst has been investigated, exhibiting high conversion and selectivity as well as good stability and recyclability.

One-pot synthesis of a porphyrin functionalized metal-organic frameworks as a recyclable visible-light-driven photosensitizer for efficient detoxification of a sulfur mustard simulant in air

Herein, we report a facile one-pot in situ self-assembly approach that enables a porphyrin photosensitizer, [5,10,15,20-tetrakis(4-methoxycarbonylphenyl)porphyrin]-Zn(II) (ZnTPP), to be enshrouded by a zeolitic imidazolate framework-8 (ZIF-8) to afford a novel visible-light-driven heterogeneous photosensitizer, ZnTPP@ZIF-8 composite. The ZnTTP photosensitizer was well dispersed and fully confined within the ZIF-8 crystals and the framework intactness and porosity were well maintained. The as-prepared ZnTPP@ZIF-8 composite integrates the advantages of ZIF-8 MOFs and ZnTTP photosensitizer. It not only can effectively produce both singlet oxygen (1O2) and superoxide ion (∙O2−) under visible light irradiation, but also exhibit high surface area and excellent stability. The structure characterization of ZnTPP@ZIF-8 composite was first carried out, and then this material can be used as a heterogeneous photosensitizer for the rapid and highly selective detoxification of a sulfur mustard simulant (2-chloroethyl ethyl sulfide) into the corresponding much less toxic sulfoxide product with a half-life of only 1.5 min under visible light irradiation at room temperature in air atmosphere. This catalyst can be readily recycled and reused at least six times without obvious loss of catalytic activity. This study will provide us a new strategy for the facile, rapid and environmentally friendly preparation of photosensitizer@MOFs composites and the rapid detoxification of sulfur mustard under ambient conditions in the future.

Donor‐Acceptor Truxene‐Based Porous Polymers: Synthesis, Optoelectronic Characterization and Defense‐Related Applications

AbstractFour donor‐acceptor (D‐A) polymers are synthesized by combining two different electron donors (truxene and its more electron rich triaza analogue, triindole) with an electron‐deficient monomer (benzothiadiazole) through two different positions (2,7,13 or 3,8,13) and their optoelectronic properties are studied by theoretical and experimental methods. One of the polymers exhibits remarkable sensing capabilities for explosive nitraoaromatics while another demonstrated efficient photocatalytic activity in the aerobic sulfoxidation of the sulfur mustard simulant 2‐chloro‐ethyl ethyl sulfide (MGS) sulfoxidation. These results highlight their potential applications in defense‐related areas. Moreover, the structure‐performance relationships observed among the four polymers have enabled us to deepen the understanding of the mechanisms underlying the performance of these polymers in the aforementioned applications, thereby providing valuable insights to further improve their properties.

Single-Chain Conjugated Polymer Guests Confined inside Metal-Organic Frameworks (MOFs): Boosting the Detection and Degradation of a Sulfur Mustard Simulant.

Real-time detection and effective degradation of toxic gases have attracted considerable attention in environmental monitoring and human health. Here, we demonstrate a solvent-assisted dynamic assembly strategy to strongly enhance the detection and degradation performance for 2-chloroethyl ethyl sulfide (CEES, as a sulfur mustard simulant) via confinement of a conjugated polymer in metal-organic frameworks (MOFs). The conjugated polymer poly(9,9-di-n-octylfluorene-altbenzothiadiazole) (F8BT) is infiltrated into one-dimensional nanochannels of the Zr-based topological MOF NU-1000 in a single-chain manner, which is caused by the nanoconfinement effect and the steric hindrance between 9,9-dioctylfluorene units and benzothiadiazole units. The obtained F8BT⊂NU-1000 composites provide a high specific surface area and abundant active sites. Based on the cooperative effect of F8BT and NU-1000, rapid and sensitive detection of CEES has been achieved. Moreover, the F8BT⊂NU-1000 composites can selectively oxidize CEES into 2-chloroethyl ethyl sulfoxide (CEESO) under mild photooxidation conditions. Overall, this study opens a new avenue for the fabrication of conjugated polymer/MOF hybrid materials that show great potential for the sensitive detection and effective removal of hazardous chemicals.

Detection of sulfur mustard simulant by trisaryl phosphoric triamide-based resin using a quartz crystal microbalance sensor.

Chemical warfare agents (CWAs) pose a persistent threat to human safety, and bis(2-chloroethyl) sulfide, or sulfur mustard (SM) is one of the most dangerous substances and is able to cause serious harm. Detecting SM gas is vital, but current methods have high-temperature requirements and limited selectivity, mainly because of the lack of CWA receptor development, and this makes them challenging to use. To address this issue, we present a trisaryl phosphoric triamide-based resin receptor that preferentially interacts with a SM simulant 2-chloroethyl ethyl sulfide (2-CEES) through dipole interactions. The receptor was synthesized through a facile process using an amine and a triethyl phosphate and the properties of its coating were enhanced using epoxy chemistry. The receptor's superior triamide structure was evaluated using a quartz crystal microbalance and reactivity was confirmed by observing the variations in reactivity according to the number of phosphoramides. The receptor showed better reactivity to 2-CEES vapor than to the known poly(epichlorohydrin) and showed selectivity to other volatile organic compounds. Moreover, its durability was evident even 30 days post-coating. The applicability of this receptor extends to array sensors, sound acoustic wave sensors, and chemo-resistive and chemo-capacitive sensors, and it promises advances in chemical warfare agent detection.

A miniaturized ozonolysis flow platform for expeditious sulfur mustard warfare simulant neutralization

DFT-guided development of a compact flow ozone platform for the neutralization of sulfur mustard simulants.

Metalloporphyrinic metal-organic frameworks for enhanced photocatalytic degradation of a mustard gas simulant.

Four metalloporphyrinic metal-organic frameworks (MOFs) were successfully synthesized and exhibited enhanced activities for the photooxidation of a sulfur mustard simulant, 2-chloroethyl ethyl sulfide (CEES). Among them, a Sn-porphyrin functionalized 2D MOF, namely CSLA-21-NH2(Sn), showed a half-life of 1.5 min for CEES oxidation under blue LED, featuring as one of the fastest photocatalysts for CEES degradation.

A giant Ce-containing poly(tungstobismuthate): Synthesis, structure and catalytic performance for the decontamination of a sulfur mustard simulant

A novel Ce-containing poly(tungstobismuthate) Cs18Na8H20[Ce3(H2O)10W8Bi4O28(B-α-BiW9 O33)4]2·64H2O (1) has been synthesized by a facile one-pot self-assembly reaction strategy. Its structural characterization is realized by virtue of single-crystal X-ray diffraction, infrared spectroscopy, powder X-ray diffraction and thermogravimetric analysis. The polyoxoanion of 1 is an octameric architecture consisting of two tetrameric entities [Ce3(H2O)10W8Bi4O28(B-α-BiW9O33)4]23− linked by two CeOW bonds, and adjacent polyoxoanions are further combined together by means of Ce3+ linkers, resulting in an infinite 1D chain architecture. Compound 1 is the currently largest tungstobismuthate, and also represents the first example of lanthanide-encapsulated tungstobismuthate exhibiting an extended structure. Furthermore, compound 1 as a heterogeneous catalyst, exhibits high activity for the oxidative decontamination of a sulfur mustard simulant, 2-chloroethyl ethyl sulfide (CEES) into 2-chloroethyl ethyl sulfoxide (CEESO).

Two Tetra-Nuclear Ln-Substituted Prazine Dicarboxylic Acid-Functionalized Selenotungstates with Catalytic Oxidation of Thioether Properties.

Two two-dimensional Ln-substituted prazine dicarboxylic acid-functionalized selenotungstates Na3H9[(H2N(CH3)2]2{(Se4W27O100)[Ln4(H2O)8(Hpzdc)2(pzdc)]}·26H2O [Ln = Nd (1) and Ce (2)]; H2pzdc = 2,3-pyrazine dicarboxylic acid) have been synthesized by one-pot self-assembly strategy, in which the basic polyanion [Se4W27O100]22-was composed of two [SeW8O31]10- fragments, a [SeW9O33]8- segment and an intriguing {SeO} group, simultaneously tetra-nuclear Ln3+ ions with H2pzdc pendants were embedded. Compounds 1 and 2 showed excellent catalytic oxidation of thioether properties within a short time (20 min) with high 100% conversion and 98.9% selectivity. In addition, the pioneering Ln-substituted selenotungstates were used as catalysts to degrade sulfur mustard simulant 2-chloroethyl ethyl sulfide at room temperature with 99% conversion and 100% selectivity. The chemical kinetic experiment studies revealed that the catalytic reaction was in compliance with the first-order reaction, and the kinetic half-life (t1/2) values were 3.814 and 3.849 min, respectively.

Photocatalytic Use of Porphyrin Based Functional Materials

Porphyrin-containing materials have been often used in photocatalysis for chemical transformations such as hydrogen evolution, CO2 reduction, purification, sterilization, and photoelectrochemical conversion. Reactive oxygen species (ROS) including free radicals/electrons and singlet oxygen (1O2) generated by photosensitizers are known to undergo secondary reactions such as multiple organic transformations and degradation of a wide variety of contaminants. Specially, they are often used for decomposition of chemical warfare agents (CWAs) such as sulfur mustard gas, which is one of the most notorious and effective chemical weapons. Various photocatalysts have been developed with successful use of ROS in photooxidation reactions. For example, in photodegradation of 2-chloroethyl ethyl sulfide (2-CEES), a sulfur mustard simulant, and demonstrated a selective decomposition to 2-chloroethyl ethyl sulfoxide (2-CEESO). Note that overoxidation of 2-CEESO generates 2-chloroethyl ethyl sulfone (2-CEESO2, fully oxidized product) and becomes a highly toxic material. Therefore, selective oxidation of 2-CEES without generating 2-CEESO2 is considered an important process in the detoxification of sulfur mustard gas.In this presentation, photocatalytic application of porphyrin based materials including PIM, silica, MOF and nanofiber will be demonstrated. Although porphyrins are well-known photosensitizers for effective photocatalytic reactions, they often suffer from self-degradation. Incorporation of porphyrins into nano materials may prevent self-degradation, resulting in effective systems with a long lifetime.

Conductometric sensor for gaseous sulfur-mustard simulant by gold nanoparticles anchored on ZnO nanosheets prepared via microwave irradiation

We report the microwave-assisted synthesis of Au nanoparticles (NPs) anchored porous ZnO nanosheets (Au-ZnO NSs) and their application in the sensitive detection of 2-chloroethyl ethyl sulfide (2-CEES) vapors, which are a simulant of sulfur mustard chemical weapon. Upon microwave irradiation for < 1 min with an annealing, highly crystalline Au NPs with a narrow particle-size distribution (2.32 ± 0.40 nm) are densely formed on the surface of porous ZnO NSs, which increases the density of oxygen vacancies in the ZnO. Under the optimal working temperature (450 °C), the response of the Au-ZnO NS sensor was measured to be 787 for 10 ppm 2-CEES, which is ∼14 times higher than that observed for the bare porous ZnO NSs-based sensor. Moreover, Au-ZnO NSs can detect 2-CEES gas even under high humidity (∼80 %) benefiting from its high sensitivity. The highly reproducible sensing performance was verified by repeated sensing test (20 times for 12 h). According to gas screening data, the Au-ZnO NSs exhibited outstanding selectivity toward sulfide compounds due to the high Au-S affinity. In summary, we have successfully demonstrated a simple and facile approach to form the Au-ZnO heterostructure by microwave irradiation and enhanced the gas-sensing performance by inducing catalytic activity.

Flow detoxification of a sulfur mustard simulant with organometallic compounds enabled by an optimization algorithm

The flow detoxification of the yperite simulant CEES with PhMgBr (&gt;99.5%) was developed at a minimal experimental cost thanks to an optimization algorithm.

A Zr-added Dawson-type poly(polyoxometalate).

A novel Zr-added trimer, [H2N(CH3)2]10H14[(Zr2P2W16O61)3]·7H2O (1), has been made under hydrothermal conditions, and contains the highest number of Zr centers in known Dawson-type poly(POM)s. A remarkable feature of this study is the first discovery of a new type of divacant [α-5,10-P2W16O60]14- fragment, which assembles with Zr4+ ions to form a cyclic trimer. Furthermore, 1 as a heterogeneous catalyst exhibits high activity for the selective oxidative degradation of a sulfur mustard simulant CEES.

Recent advances in oxidative catalytic applications of polyoxovanadate-based inorganic-organic hybrids.

Polyoxovanadates (POVs) have received widespread attention in catalytic applications due to their various structures and remarkable redox properties. By introducing a second transition metal, POV-based inorganic-organic hybrid (POVH) catalysts show increasing stability and more catalytic active sites compared with pure POVs. In this perspective article, POVH materials as oxidative catalysts have been classified into two main categories according to the interactions between transition metal-complex units and POV clusters: (i) hybrids with metal-organic units act as isolated cations and (ii) hybrids with an organic ligand coordinate to the second transition metal, which is further linked to a POV cluster via oxygen bridges directly or indirectly to give zero-, one-, two- or three-dimensional supramolecular structures. The oxidative conversion of organic compounds, including thiophene derivatives, thioethers, alkanes, alcohols, and alkenes, and oxidative detoxification of a sulfur mustard simulant or degradation of lignin, along with the oxidative photo/electrocatalytic transformation of organic compounds catalyzed by POVH materials, are discussed in detail. Furthermore, the challenges and prospects toward the development of POVH catalysts are explored briefly from our perspectives.

Comparison of skin decontamination strategies in the initial operational response following chemical exposures

In mass casualty incidents including hazardous chemical skin exposure, decontamination is the primary intervention to avoid systemic uptake of the toxic compound. The protocol needs to be both simple and efficient to enable a rapid response and avoid delay of patient management. In the present study, decontamination strategies included in the initial operational response were evaluated following human skin exposure in vitro to four different contaminants.Results demonstrated that the efficacy of selected decontamination procedures was highly dependent on the chemical contaminant used. Dry removal of the sulfur mustard simulant methyl salicylate prior to wet decontamination was found beneficial compared to wet decontamination alone. Rapidly initiated wet decontamination was more efficient compared to dry and wet removal of the industrial chemical 2-butoxyethanol and the nerve agent tabun. Following VX-exposure, all wet decontamination procedures resulted in increased agent penetration compared to the control.In conclusion, challenges in establishing simple and efficient decontamination procedures for a broad-spectrum of chemicals have been demonstrated. The impact of including a dry removal step during decontamination was evidently agent specific. Despite the variation in efficacy, immediately initiated dry removal may facilitate patient management until wet decontamination resources are available and to reduce the risk of secondary contamination.