Simple Solution Research Articles

Do nothing, do minimum or do something? Why public project appraisals “always” recommend large projects

PurposeIn the project initiation phase, an appraisal is needed to clarify the strategic problem and alternative solutions. Full-scale construction projects and simple solutions (do-minimum alternatives) should be assessed. The do-nothing alternative is the baseline for the appraisal and an option in itself. The paper explores the role of do-nothing and do-minimum alternatives in public project appraisal, which may significantly impact the attractiveness of a construction project.Design/methodology/approachThe paper presents an empirical study from Norway, which requires external quality assurance (QA) of early project appraisals. The data include an extensive document review of 112 projects and interviews with 41 experts involved in the appraisal processes.FindingsOf 112 appraisals, 110 recommended a major construction project, including cases where the benefits and value were low or uncertain. The do-nothing alternative was generally included as a reference but not treated as a viable option. Do-minimum alternatives were often not explored. By contrast, the external QA reports recommended do-nothing or do-minimum in 28 cases. Interestingly, although political decision-makers rarely reject projects, they may put them on hold indefinitely, implying that the actual outcome in many cases is still do-nothing.Originality/valueThe paper addresses a topic that has been understudied in the literature. The findings contribute to the broader literature on project initiation processes, project appraisal and how to reduce the risk of bias and manipulation in appraisals.

Upgrading Polyolefin Plastic Waste into Multifunctional Porous Graphene using Silicone-Assisted Direct Laser Writing.

The widespread use of plastics, especially polyolefin including polyethylene and polypropylene, has led to severe environmental crises. Chemical recycling, a promising solution for extracting value from plastic waste, however, is underutilized due to its complexity. Here, a simple approach, silicone-assisted direct laser writing (SA-DLW) is developed, to upgrade polyolefin plastic waste into multifunctional porous graphene, called laser-induced graphene (LIG). This method involves infiltrating polyolefins with silicone, which retards ablation during the DLW process and supplies additional carbon atoms, as confirmed by experimental and molecular dynamic results. A remarkable conversion yield of 38.3% is achieved. The upgraded LIG exhibited a porous structure and high conductivity, which is utilized for the fabrication of diverse energy and electronic devices with commendable performance. Furthermore, the SA-DLW technique is versatile for upgrading plastic waste in various types and forms. Upgrading plastic waste in the form of fabric has significantly simplified pre-treatment. Finally, a wearable flex sensor is fabricated on the non-woven fabric of a discarded medical mask, which is applied for gesture monitoring. This work offers a simple but effective solution to upgrade plastic waste into valuable products, contributing to the mitigation of environmental challenges posed by plastic pollution.

Supramolecular Complexation Reinforced Polymer Frustrated Packing: Controllable Dual Porosity for Improved Permselectivity of Coordination Nanocage Mixed Matrix Membranes.

The developments of mixed matrix membranes (MMMs) are severely hindered by the complex inter-phase interaction and the resulting poor utilization of inorganics' microporosity. Herein, a dual porosity framework is constructed in MMMs to enhance the accessibility of inorganics' microporosity to external gas molecules for the effective application of microporosity for gas separation. Nanocomposite organogels are first prepared from the supramolecular complexation of rigid polymers and 2nm microporous coordination nanocages (CNCs). The network structures can be maintained with microporous features after solvent removal originated from the rigid nature of polymers, and the strong coordination and hydrogen bond between the two components. Moreover, the strong supramolecular attraction reinforces the frustrated packing of the rigid polymers on CNC surface, leading to polymer networks' extrinsic pores and the interconnection of CNCs' micro-cavities for the fast gas transportation. The gas permeabilities of the MMMs are 869 times for H2 and 1099 times for CO2 higher than those of pure polymers. The open metal sites from nanocage also contribute to the enhanced gas selectivity and the overall performance surpasses 2008 H2/CO2 Robeson upper bound. The supramolecular complexation reinforced packing frustration strategy offers a simple and practical solution to achieve improved gas permselectivity in MMMs.

Noether symmetries of F(T,X,ϕ)\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$F(T,X,\\phi )$$\\end{document} cosmology

This article explores an analysis via the Noether symmetry approach to investigate an extended teleparallel F(T,X,ϕ)\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$F(T,X,\\phi )$$\\end{document} gravity model in the context of a Friedmann–Robertson–Walker spacetime. The model incorporates the torsion scalar T, scalar field ϕ\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\phi $$\\end{document} and the kinetic term X of the scalar field. This approach allows us to select physically interesting models by restricting arbitrariness in the F(T,X,ϕ)\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$F(T,X,\\phi )$$\\end{document} function. Thus we focus on two types of the function F(T,X,ϕ)\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$F(T,X,\\phi )$$\\end{document}, namely models involving the generalized teleparallel dark energy and the nonlinear function of the kinetic term and analyze the Noether symmetry properties and demonstrate the presence of non-vanishing Noether vectors. In the first model, by specifically considering the X4\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\mathbf{X_{4}}$$\\end{document} Noether symmetry, representing a scaling symmetry, we simplify the field equations and introduce a cyclic variable to enable a more workable formulation. Furthermore, we present a comprehensive graphical analysis, showcasing the time evolution of the scale factor and the scalar field by using the solutions obtained through these new variables. Additionally, we examine some fundamental cosmological parameters. For the second model, which includes the nonlinear form of the kinetic term, Noether symmetry results in obtaining simple power-law solutions for the dynamic variables. Our findings clearly show that the considered models represent an accelerating expansion of the Universe, which is consistent with observations. This study highlights the efficacy of the Noether symmetry approach in defining the functional form of F(T,X,ϕ)\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$F(T,X,\\phi )$$\\end{document} and obtaining precise cosmological solutions. The analytical solutions and graphical analysis offer valuable insights into the dynamic behavior of the models, contributing to understanding the evolving nature of the Universe.

High-Entropy Metal Oxide-Coated Carbon Cloth as Catalysts for Long-Life Li-S Batteries.

Lithium-sulfur (Li-S) batteries with high specific energy density, low cost, and environmental friendliness of sulfur have been regarded as a competitive alternative to replace lithium-ion batteries. However, the shuttle effect and the sluggish conversion rate of lithium polysulfides (LiPSs) have seriously limited the practical application of Li-S batteries. Herein, high-entropy oxides grown on the carbon cloth (CC/HEO) are synthesized by a simple and ultrafast solution combustion method for the sulfur cathode. The as-prepared composites possess abundant HEO active sites for strong interaction with LiPSs, which can significantly promote redox kinetics. Besides, the carbon fiber substrate not only ensures high electrical conductivity but also accommodates large volume change, leading to a stable sulfur electrochemistry. Benefiting from the rational design, the Li-S batteries with CC/HEO as cathode skeleton exhibits good cyclability with a capacity decay rate of 0.057% per cycle after 1000 cycles at 2 C. More importantly, the Li-S batteries with 4.3 mg cm-2 high sulfur loading can still retain a high capacity retention of 78.2% after 100 cycles.

Analysis of Power System Electromagnetic Transients Using the Finite Element Technique

In this paper, a numerical model for the analysis of electromagnetic transients in a power system, based on the finite element technique, was developed. The simplicity of the finite element technique is manifested in the fact that the problem of solving any mathematically described phenomena in an area is reduced to solving those same phenomena in a small part of that area, i.e., finite elements. Based on appropriate mathematical models, numerical models of the synchronous generator and other parts of the power system have been developed. System of differential equations of each power system element have been included in the numerical model in such a way that we employ numerical integration of the differential equations using the generalized trapezoidal rule (ϑ-method) and reduce it to a system of algebraic equations in each time step. In a practical sense, this method enables a very simple solution to the problem of a real power system, i.e., a system with many generators, transformers, transmission lines and other elements. The accuracy of the developed numerical model for the analysis of electromagnetic transients in a power system has been confirmed by comparing the calculated results with the results obtained using the EMTP software (version 3.3) package.

A comprehensive model for predicting populist attitudes

Populist attitudes are multi-causal, but their determinants are often studied separately, in small groups, or in different samples. This study presents a comprehensive model for the prediction of populist attitudes using a single sample. We use an ideological approach and measure of populist attitudes as anti-elitism, popular sovereignty, and homogeneity, while the differences between the elite and the people are Manichean. Analyzing a sample based on a representative quota for gender, age, education and region of Slovakia (N = 254), it was found that relative deprivation, belief in simple solutions, external political efficacy, trust towards experts, and conspiracy mentality were significant predictors of populist attitudes after controlling for other variables. The effect of education and subjective income faded out after adding variables into the model. The model explained 54% of the variance in populist attitudes. The results are discussed in detail with respect to its limitations and country specifics.

Factors associated with the co-utilization of oral rehydration solution and zinc for treating diarrhea among under-five children in 35 sub-saharan Africa countries: a generalized linear mixed effect modeling with robust error variance

IntroductionEven though childhood diarrhea is treated with a simple treatment solution, it continues to be one of the leading causes of under-five child mortality and malnutrition globally. In resource-limited settings such as Sub-Saharan Africa (SSA), the combination of oral rehydration salts (ORS) and zinc is regarded as an effective treatment for diarrhea; however, its utilization is very low. The purpose of this study was to determine the proportion and associated factors of co-utilization of ORS and zinc among under-five children with diarrhea in SSA.MethodsThe proportion and associated factors of co-utilization of ORS and zinc among under-five children with diarrhea in SSA were determined using secondary data analysis of recent Demographic and Health Surveys (DHS) of 35 SSA countries. The study included a total of 44,341 under-five children with diarrhea in weighted samples. A generalized linear mixed-effects model with robust error variance was used. For the variables included in the final model, adjusted prevalence ratios (aPR) with 95% confidence intervals (CI) were estimated. A model with the lowest deviance value were considered as the best-fitted model.ResultThe pooled proportion of co-utilization of ORS and zinc for the treatment of diarrhea among under five children in SSA countries was 43.58% with a 95% CI (43.15%, 44.01%). Sex of the child, maternal age, residence, maternal educational and employment status, wealth index, media exposure, perceived distance to health facility and insurance coverage were statistically significant determinants of ORS and Zinc co-utilization for treating diarrhea among under five children in SSA.ConclusionOnly less than half of under-five children with diarrhea in SSA were treated with a combination of ORS and zinc. Thus, strengthening information dissemination through mass media, and community-level health education programs are important to scale up the utilization of the recommended combination treatment. Furthermore, increasing health insurance coverage, and establishing strategies to address the community with difficulty in accessing health facilities is also crucial in improving the use of the treatment.

Oral In-Situ Nanoplatform with Balanced Hydrophobic-Hydrophilic Property for Transport Across Gastrointestinal Mucosa.

Transport of oral nanocarriers across the GI epithelium necessitates transport across hydrophilic mucus layer and the hydrophobic epithelium. Based on hydrophobic-hydrophilic balance, Curcumin-Lipomer (lipid-polymer hybrid nanoparticles) comprising hydrophobic stearic acid and hydrophilic Gantrez™ AN 119 (Gantrez) were developed, by a radical in-situ approach, to successfully traverse both barriers. A monophasic preconcentrate (Cur-Pre) comprising Cur(Curcumin), stearic acid, Gantrez and stabilizers, prepared by simple solution, was added to an aqueous phase to instantaneously generate Curcumin-Lipomer (Cur-Lipo) of nanosize and high entrapment efficiency (EE). Cur-Lipo size and EE was optimized by Box-Behnken Design. Cur-Lipomers of varying hydrophobic-hydrophilic property obtained by varying the stearic acid: Gantrez ratio exhibited size in the range 200-400nm, EE > 95% and spherical morphology as seen in the TEM. A decrease in contact angle and in mucus interaction, evident with increase in Gantrez concentration, indicated an inverse corelation with hydrophilicity, while a linear corelation was observed for mucopenetration and hydrophilicity. Cur-SLN (solid lipid nanoparticles) which served as the hydrophobic reference revealed contact angle > 90°, maximum interaction with mucus and minimal mucopenetration. The ex-vivo permeation study through chicken ileum, revealed maximum permeation with Cur-Lipo1 and comparable and significantly lower permeation of Cur-Lipo1-D and Cur-SLN proposing the importance of balancing the hydrophobic-hydrophilic property of the nanoparticles. A 1.78-fold enhancement in flux of hydrophobic Cur-SLN, with no significant change in permeation of the hydrophilic Cur-Lipomers (p > 0.05) following stripping off the mucosal layer was observed. This reiterated the significance of hydrophobic-hydrophilic balance as a promising strategy to design nanoformulations with superior permeation across the GI barrier.

A PVDF/MWCNTs/GO@MWCNTs/AgNWs bilayer structured composite film with ultra‐high EMI shielding and conductivity performance

AbstractElectromagnetic interference (EMI) shielding materials with easy processing, high electrical conductivity, and excellent absorption loss are urgently needed in aerospace, military stealth and portable electronic devices. In this study, a polyvinylidene fluoride/multi‐walled carbon nanotubes (PVDF/MWCNTs)‐3 wt% composite film prepared by simple solution mixing and polyethylene terephthalate (PET) nonwoven scraping method was used as the substrate, and the PVDF/MWCNTs/graphene oxide@multi‐walled carbon nanotubes (PVDF/MWCNTs/GO@MWCNTs) and PVDF/MWCNTs/GO@MWCNTs/silver nanowires (PVDF/MWCNTs/GO@MWCNTs/AgNWs) bilayer composite films were prepared by vacuum‐assisted filtration (VAF). When the amount of GO@MWCNTs was 20 mL, the conductivity of PVDF/MWCNTs/GO@MWCNTs film is 3.5 × 101 S m−1, the total EMI shielding effectiveness (EMI SET) was 15.5 dB and the EMI absorption efficiency (EMI SEA) was 10.7 dB, the specific EMI SE (SSE/T) was 539.5 dB/ dB/(cm−2 g). When the amount of AgNWs was 25 mL, the conductivity of PVDF/MWCNTs/GO@MWCNTs/AgNWs film with 0.47 mm thickness was 1.6 × 104 S m−1, the EMI SET was 69.1 dB, the EMI SEA was 61.1 dB, and the SSE/T was 2320.0 dB cm2 g−1. The results show that the absorption was played a dominant role in the EMI shielding mechanism of obtained films. The addition of GO@MWCNTs/AgNWs increases the electrical conductivity and EMI shielding performance of the film more than the addition of GO@MWCNTs. This is mainly because GO， MWCNTs and AgNWs formed a novel three‐dimensional conductive network structure inside the composite film due to their hydrogen bonding and van der Waals forces, which increases the carrier channels and promotes the interaction between the internal microcurrents and the electromagnetic waves, achieving the purpose of attenuating the electromagnetic waves. The obtained PVDF/MWCNTs/GO@MWCNTs/AgNWs film has good potential in EMI shielding in aerospace, military and electronic intelligence applications.Highlights Well‐dispersed and highly conductive GO@MWCNTs were prepared by hydrothermal synthesis. AgNWs with good conductivity and high aspect ratio were prepared. PVDF‐based bilayer composite films with novel 3D conductive network were prepared. The synergistic EMI shielding mechanism of the film is discussed.

Capacity Analysis of Hybrid Satellite-Terrestrial Systems with Selection Relaying.

A hybrid satellite-terrestrial relay network is a simple and flexible solution that can be used to improve the performance of land mobile satellite systems, where the communication links between satellite and mobile terrestrial users can be unstable due to the multipath effect, obstacles, as well as the additional atmospheric losses. Motivated by these facts, in this paper, we analyze a system where the satellite-terrestrial links undergo shadowed Rice fading, and, following this, terrestrial relay applies the selection relaying protocol and forwards the information to the final destination using the communication link subjected to Nakagami-m fading. For the considered relaying protocol, we derive the exact closed-form expressions for the outage probability, outage capacity, and ergodic capacity, presented in polynomial-exponential form for the integer-valued fading parameters. The presented numerical results illustrate the usefulness of the selection relaying for various propagation scenarios and system geometry parameters. The obtained analytical results are corroborated by an independent simulation method, based on the originally developed fading simulator.

The Impact of Replacing Synchronous Generators with Renewable-Energy Technologies on the Transient Stability of the Mangystau Power System: An Introduction to Flexible Automatic Dosage of Exposures

Since the creation of the first parallel electrical power systems around the world, the rotor angle stability of synchronously operating generators has been one of the most crucial and challenging problems. In modern electricity networks, including in Kazakhstan, where renewable energy technologies are rapidly emerging, the issue of stability takes on even greater importance due to the technical shortcomings of inverter-based generation. In this framework, an analysis of rotor angle transient stability was carried out when replacing existing synchronous generators with doubly fed induction generators under a certain pre-emergency mode. A critical proportion of active power generation by DFIG units was identified at which transient stability can still be maintained due to the sufficient stored kinetic energy of the synchronous machines remaining in operation. In addition, two simple solutions were investigated to improve transient stability, such as an increased time of the automatic reclosure operation and the use of special load-shedding automation. Finally, this paper proposes a novel type of flexible smart-grid automation that is capable of monitoring the main operating parameters and issuing control actions depending on inertia, the availability of wind resources, and the load of the system as a whole. For this analysis, a real power system from the Mangystau region in Kazakhstan was considered, and the PowerWorld software 23 was used.

(C8H7N2O2)2[Bi2Br8]·2H2O and (C8H7N2O2)6[Bi2Cl10]Cl2·2H2O: Exploring Birefringent Crystals in Hybrid Halide Systems.

In this study, new hybrid birefringent crystals of (C8H7N2O2)2[Bi2Br8]·2H2O and (C8H7N2O2)6[Bi2Cl10]Cl2·2H2O were successfully synthesized by introducing a new birefringent group [C8H7N2O2]+ by a simple aqueous solution evaporation method. They crystallize in the P21/n space group, and their structure consists mainly of the π-conjugated group [C8H7N2O2]+ and the octahedron centered on Bi3+. By first-principles calculations, the birefringence response comes from the [C8H7N2O2]+ group with a planar π-conjugated structure. Meanwhile, the synthesis, structure, first-principles calculations, and optical properties are reported in this paper.

Slender phoretic loops and knots

We present an asymptotic theory for solving the dynamics of slender autophoretic loops and knots. Our formulation is valid for nonintersecting three-dimensional center lines, with arbitrary chemical patterning and varying (circular) cross-sectional radius, allowing a broad class of slender active loops and knots to be studied. The theory is amenable to closed-form solutions in simpler cases, allowing us to analytically derive the swimming speed of chemically patterned tori, and the pumping strength (stresslet) of a uniformly active slender torus. Using simple numerical solutions of our asymptotic equations, we then elucidate the behavior of many exotic active particle geometries, such as a bumpy uniformly active torus that spins and a Janus trefoil knot, which rotates as it swims forwards. Published by the American Physical Society 2024

High-pressure intrusion of double salt aqueous solution in pure silica chabazite: searching for cation selectivity

Heterogeneous lyophobic systems (HLSs), i.e. systems composed of a nanoporous solid and a non-wetting liquid, have attracted much attention as promising candidates for innovative mechanical energy storage and dissipation devices. In this work, a new HLS based on a pure silica chabazite (Si-CHA) and a ternary electrolyte solution (KCl + CaCl2) is studied from porosimetric and crystallographic points of view. The combined approach of this study has been fundamental in unravelling the properties of the system. The porosimetric experiments allowed the determination of the energetic behaviour, while high-pressure in situ crystallographic analyses helped elucidate the mechanism of intrusion. The results are compared with those obtained for systems involving the same zeolite but intruded with solutions containing only single salts (CaCl2 or KCl). The porosimetric results of the three Si-CHA systems intruded by simple and complex electrolyte solutions (KCl 2 M, CaCl2 2 M and the mixture KCl 1 M + CaCl2 1 M) suggest that the intrusion pressure is mainly influenced by the nature of the cations. The CaCl2 2 M solution shows the highest intrusion pressure and KCl 2 M the lowest, whereas the mixture KCl 1 M + CaCl2 1 M is almost in the middle. These differences are probably related to the higher hydration enthalpy and Gibbs energy of Ca2+ compared with those of K+. It has been demonstrated that partial ion desolvation is needed to promote the penetration of the species, and a higher solvation energy requires higher pressure. The `intermediate' value of intrusion pressure shown by the complex electrolyte solution arises from the fact that, statistically, the second/third solvation cation shells can be assumed to be partially shared between K+ and Ca2+. The stronger interaction of Ca2+ with H2O molecules thus also influences the desolvation of K+, increasing the pressure needed to activate the process compared with the pure KCl 2 M solution. This is confirmed by the structural investigation, which shows that at the beginning of intrusion only K+, Cl− and H2O penetrate the pores, whereas the intrusion of Ca2+ requires higher pressure, in agreement with the hydration enthalpies of the two cations.

Realigning Curriculum to Simplify the Challenges of Multi-Graded Teaching in Government Schools of Karnataka

A comprehensive overview of the perceptions, challenges and advantages related to multigrade classrooms are discussed in detail. Multigrade teaching is more common than what is generally perceived and is considered as a solution for a variety of challenges faced by the education system of a society. A few methods of teaching in multigrade teaching are discussed in detail with advantages and limitations in following these methods. The urgent need for developing and supplying the instructional material specifically designed for teaching in multigrade classrooms is also highlighted in the article. A simple and novel solution that may be followed by teachers of Karnataka is also discussed in detail.

Application of modified kaolinite in improving thermal stability of polydimethylsiloxane

AbstractThis research investigated the chemical structure and morphology of the hydrogenated tallow amine (HTA)‐intercalated kaolinite by XRD, FT‐IR, and TEM measurements. The experimental outcomes show that intercalation of kaolinite by HTA, with an intercalation rate of 63.2%, expands the interlayer distance with a subsequent dominant basal XRD peak at 2θ ≈ 7.9°. Furthermore, a composite was created from the HTA‐intercalated kaolinite and polydimethylsiloxane (PDMS) through a favorable interaction between the end silanol groups of PDMS and the modified kaolinite surface. Thermogravimetry‐differential scanning calorimetry results indicate that introducing the HTA‐intercalated kaolinite into the PDMS matrix increases the thermal stability of the composite from 178 to 343 °C. However, the thermal stability of the composite is lower than that of other published materials. The synthesis of kaolinite/PDMS composite with enhanced structural and thermal stability outcomes has been provided via a simple and effective solution method that should have further applications.

Developing a simple and efficient modeling solution for predicting key phenological stages of table grapes in a non-traditional viticulture zone in south Asia.

Phenological shifts are one of the most visible signs of climatic variability and change in the biosphere. However, modeling plant phenological responses has always been a key challenge due to climatic variability and plant adaptation. Grapevine is a phenologically sensitive crop and, thus, its developmental stages are affected by the increase in temperature. The goal of this study was to develop a temperature-based grapevine phenology model (GPM) for predicting key developmental stages for different table grape cultivars for a non-traditional viticulture zone in south Asia. Experiments were conducted in two vineyards at two locations (Chakwal and Islamabad) in the Pothawar region of Pakistan during the 2019 and 2020 growing seasons for four cultivars including Perlette, King's Ruby, Sugraone and NARC Black. Detailed phenological observations were obtained starting in January until harvest of the grapes. The Mitscherlich monomolecular equation was used to develop the phenology model for table grapes. There was a strong non-linear correlation between the Eichhorn and Lorenz phenological (ELP) scale and growing degree days (GDD) for all cultivars with coefficient of determinations (R2) ranging from 0.90 to 0.94. The results for model development indicated that GPM was able to predict phenological stages with high skill scores, i.e., a root mean square (RMSE) of 2.14 to 2.78 and mean absolute error (MAE) of 1.86 to 2.26 days. The prediction variability of the model for the onset timings of phenological stages was up to 3 days. The results also reveal that the phenology model based on GDD approach provides an efficient planning tool for viticulture industry in different grape growing regions. The proposed methodology, being a simpler one, can be easily applied to other regions and cultivars as a predictor for grapevine phenology.

Physical-Entanglements-Supported Polymeric Form Stable Phase Change Materials with Ultrahigh Melting Enthalpy.

With the rapid development of new energy and the upgrading of electronic devices, structurally stable phase change materials (PCMs) have attracted widespread attentions from both academia and industries. Traditional cross-linking, composites, or microencapsulation methods for preparation of form stable PCMs usually sacrifice part of the phase change enthalpy and recyclability. Based on the basic polymer viscoelasticity and crystallization theories, here, a kind of novel recyclable polymeric PCM is developed by simple solution mixing ultrahigh molecular weight of polyethylene oxide (UHMWPEO) with its chemical identical oligomer polyethylene glycol (PEG). Rheological and leakage-proof experiments confirm that, even containing 90% of phase change fraction PEG oligomers, long-term of structure stability of PCMs can be achieved when the molecular weight of UHMWPEO is higher than 7000kg mol-1 due to their ultralong terminal relaxation time and large number of entanglements per chain. Furthermore, because of the reduced overall entanglement concentration, phase change enthalpy of PCMs can be greatly promoted, even reaching to ≈185 J g-1, which is larger than any PEG-based form stable PCMs in literatures. This work provides a new strategy and mechanism for designing physical-entanglements-supported form stable PCMs with ultrahigh phase change enthalpies.

Parasitic-Based Model for Characterizing False Turn-On and Switching-Based Voltage Oscillation in Hybrid T-Type Converter

High frequency and high voltage switching converters utilizing wide bandgap semiconductors are gaining popularity thanks to their compactness and improved efficiency. However, the faster switching requirements gives rise to new challenges. A key issue is the increased oscillation of the drain–source voltage caused by the switching action of the complementary switch in the same phase or change of state of the other phase switches. The voltage stress caused by these oscillations can damage the switch. Furthermore, the high dv/dt during turning-on of one switch might result in false turn-on of the complementary switch due to the miller effect. In this paper, these issues are investigated in a T-type converter through analytical and experimental analysis. Based on the proposed analytical approach, simple and cost-wise solutions utilizing an optimum design of gate driver circuits and circuit layout modifications can be developed to cope with the aforementioned issues. A comprehensive analytical model of the converter with consideration of parasitic capacitances and inductances is developed. By performing sensitivity analysis on the model, the effect of the parasitic parameters on the drain–source voltage oscillation and gate–source voltage amplitude in case of false turn-on is studied. The validity of the model is then assessed through numerical simulations and experimental results.