Simple One-Step Research Articles

A Simple and Efficient One-Step Synthesis System for Flexible Production of Circular RNA in E. coli

A Simple and Efficient One-Step Synthesis System for Flexible Production of Circular RNA in E. coli

Bifunctional colloid based on anchoring reactions in-situ modified electrodes: For electrochemical sensing and HER

In this study, a bifunctional [PtCl6]2−-GO colloidal material was prepared by anchoring [PtCl6]2− by abundant oxygen-containing functional groups in protonated graphene oxide. Two modification strategies, surface overcoating and electrochemical in situ deposition, were adopted to modify the screen-printed carbon electrode (SPCE), foam electrodes (CuF, NiF), respectively, and Pt-rGO, which uniformly covered the electrode surface, was obtained by a simple onestep of reducing [PtCl6]2−-GO. The effectiveness of the modified materials and electrode modification strategies prepared was validated by tinidazole electrochemical detection and hydrogen evolution reaction (HER). The results indicated that the Pt-rGO modified SPCE possessed lower LOD and higher sensitivity for the detection. Furthermore, as for HER, optimized Pt-rGO-modified NiF and CuF required only 26 mV and 76 mV overpotentials in alkaline and acidic solutions, respectively, to obtain current densities of 10 mA cm−2. This was largely ascribed to the synergistic interaction between platinum and rGO, with the synthesized platinum-rGO displaying stronger active sites and higher intrinsic activity. In particular, Pt, which acts as an active center, could offer part of its electron to H2O and adjacent reduced graphene oxide sites, thus promoting strong electrical connections and efficient HER kinetics.

Impact of the Stool-Based Xpert Test on Childhood Tuberculosis Diagnosis in Selected States in Nigeria.

In Nigeria, most children with tuberculosis (TB) present at primary health clinics where there are limited personnel skilled in collecting appropriate respiratory specimens from those who cannot produce sputum. KNCV Nigeria, in collaboration with the National Tuberculosis Control Program, implemented a modified simple, one-step (SOS), stool-based Xpert MTB/RIF method for diagnosis of TB in children who cannot expectorate sputum. We evaluated the impact of its implementation on childhood TB diagnosis. A cross-sectional study was conducted across 14 selected states using secondary data of children presumed to have TB. Stool was collected from children presumed to have TB and processed using Xpert. Out of 52,117 presumptive TB cases, 52% were male and 59.7% were under 5 years old. A total of 2440 (5%) cases were diagnosed with TB, and 2307 (95%) were placed on treatment. Annual TB notifications increased significantly after the introduction of the stool-based Xpert test when compared to those in the pre-implementation period. Increasing contributions from stool testing were observed throughout the implementation period, except in 2020 during the COVID-19 era. Overall, stool Xpert testing improved childhood TB notification in the studied states. Interventions aimed at awareness creation, capacity building, and active case finding improved the performance of the test.

Diagnostic accuracy, feasibility and acceptability of stool-based testing for childhood tuberculosis.

Childhood tuberculosis (TB) diagnosis remains challenging, partly because children cannot provide sputum. This study evaluated the diagnostic accuracy of the Simple One-Step (SOS) stool method with Xpert MTB/RIF Ultra (Xpert-Ultra) for childhood TB compared to culture and Xpert-Ultra on a respiratory sample (RS) and clinical diagnosis. It also assessed the feasibility and acceptability of stool testing according to laboratory staff, and caregivers' sample preference. We enrolled children (≤10 years) with presumptive pulmonary tuberculosis in Ethiopia. RS was tested using Xpert-Ultra and culture; stool samples were tested using the SOS stool method with Xpert-Ultra. Laboratory staff and caregivers' opinions were assessed using standardised questionnaires. Of the 898 children enrolled, 792, 832 and 794 were included for assessing the diagnostic accuracy of SOS stool with Xpert-Ultra against culture, RS Xpert-Ultra and clinical diagnosis, respectively, yielding sensitivity estimates for SOS stool with Xpert-Ultra of 69.1% (95% confidence interval (CI) 56.0-79.7%), 76.8% (95% CI 64.2-85.9%) and 59.0% (95% CI 47.9-69.2%), respectively. The specificity was ≥98.8% for all comparisons. The rate of non-determinate test results was 2.8% after one repeat test. According to laboratory staff, stool collection was feasible and acceptable and the SOS stool method was easy to perform. Most caregivers (75%) preferred stool for TB diagnosis over RS. This study shows that SOS stool Xpert-Ultra testing offers a good alternative to RS testing for TB in children who cannot spontaneously produce a sputum sample and would otherwise need to undergo invasive procedures to obtain RS for diagnosis.

Use of stool swabs in molecular transport media increases access to Xpert Ultra testing for TB in children.

SETTING: Tertiary level hospital in Lusaka, Zambia.OBJECTIVE: To measure concordance between Xpert® MTB/RIF Ultra (Ultra) results of stool with and without transport media, and compare Ultra results from the two stool processing methods to Ultra and culture results using gastric aspirates (GA).DESIGN: This was a cross-sectional study collecting stool and GA from children 0-5 years presenting with signs and symptoms of TB. Stool was processed for Ultra testing by two methods: the Simple-One-Step (SOS) on an aliquot of stool and PrimeStore® MTM Molecular Transport Medium (PS-MTM) using a stool swab.RESULTS: A total of 114 children (median age: 17 months, IQR 7-30) provided both a stool and a GA sample. Stool Ultra results processed using the PS-MTM method showed high concordance with stool Ultra results processed by the SOS method, with only 1/114 discordant results. Concordance with GA Ultra was high as well, as 9/13 Mycobacterium tuberculosis (MTB) cases detected were identified by all three methods.CONCLUSION: Ultra results from stool swabs collected using PS-MTM were equivalent to results from stool using the SOS method and GA. Given that PS-MTM inactivates MTB and stabilises DNA without cold chain, using it for stool has the potential to increase access to a TB diagnosis for children in underserved areas.

Comparison of Xpert MTB/RIF Ultra Results of Stool and Sputum in Children with Presumptive Tuberculosis in Southern Ethiopia.

The introduction of stool as a readily obtainable sample and the recently developed simple one-step (SOS) stool processing method on Xpert MTB/RIF Ultra (Xpert Ultra) offer an opportunity for TB diagnosis in children. We conducted this study in secondary health facilities in Ethiopia, which are the first-level referral facilities for childhood TB diagnosis and treatment, with the aim to determine if stool-based TB diagnosis can be performed with a reasonable level of concordance with sputum tests using Xpert MTB/RIF Ultra. Eligible children 0-14 years old with presumptive pulmonary TB were asked to provide stools in addition to routinely requested sputum samples. We determined the level of agreement between the stool and sputum test results. Of the 373 children included in the study, 61% were <5 years of age and 56% were male. Thirty-six children (9.7%) were diagnosed with TB, and all started treatment. The rate of concordance between stool and sputum was high, with a kappa value of 0.83 (p < 0.001). There were more Xpert Ultra positive results on stool (n = 27 (7.2%)) than on sputum/NGA (n = 23 (6.2%)). Laboratories in secondary hospitals can perform stool-based TB diagnosis in children, with high concordance between stool and sputum test results reaffirming the applicability of the SOS stool method.

Optimization of the Simple One-Step Stool Processing Method to Diagnose Tuberculosis: Evaluation of Robustness and Stool Transport Conditions for Global Implementation.

Stool is recommended as an alternative specimen for the diagnosis of tuberculosis (TB) in young children, as they cannot easily produce sputum. The Simple One-Step (SOS) stool processing method is a new and simple stool processing method for the detection of Mycobacterium tuberculosis (MTB) using Xpert MTB/RIF Ultra (Xpert-Ultra). We determined the robustness of the SOS stool processing method and stool specimen transport conditions in participants with confirmed TB. We processed stool using the standard protocol after simulated "transport," varying time, and temperature, and experimented with slightly modified processing steps. We included 2,963 Xpert-Ultra test results from 132 stool specimens of 47 TB participants, including 11 children aged <10 years. We compared Xpert-Ultra processing errors and MTB positivity rates between standard and modified procedures. Minor deviations from the standard SOS protocol did not significantly impact the Xpert-Ultra test outcomes. The rate of Xpert-Ultra processing errors significantly increased with noncold-chain transport, exposure of stool to sample reagent at room temperature or beyond 12 h, and adding >0.8 g of stool. We found that almost all steps in the current SOS stool processing method provide optimal Xpert-Ultra results but recommend an adjustment to use a wider range of stool amounts (0.3 to 0.8 g) than advised previously (0.8 g). With this adaptation, stool-based diagnosis of TB using the SOS stool processing method can be scaled-up. IMPORTANCE The manuscript will support the global implementation and scale-up of the SOS stool method in routine settings. It also provides important insights on the optimal stool transport conditions and robustness of the SOS method, which can be used for bacteriological diagnosis of TB in children at the lowest levels of the healthcare system, avoiding lengthy healthcare-seeking pathways and additional costs.

Simple One-Step Synthesis of Nipa Frond-Derived Magnetic Porous Carbon for Decolorization of Acid Yellow 23

Nipa is an abundant, underutilized palm whose major part is its fronds. Nipa fronds (NF) were, therefore, valorized as a renewable carbon resource for the preparation of advanced magnetic porous carbon (MPC) via simple one-step pyrolysis with FeCl3 addition as a magnetic precursor. Properties of the obtained material were determined by X-ray diffraction (XRD), nitrogen adsorption and desorption isotherms, vibrating sample magnetometer (VSM), scanning electron microscopy (SEM) images, energy-dispersive X-ray (EDX) spectroscopy, and Fourier-transform infrared (FTIR) spectroscopy. XRD results showed that Fe3O4 along with Fe0 particles were formed in the porous carbon base. FeCl3-activation of NF yielded MPC with a high specific surface area (SBET) of 330 m2/g, a large total pore volume (Vtotal) of 0.26 cm3/g, and a strong specific saturation magnetization of 7.65 emu/g. Subsequently, MPC was explored for the removal of acid yellow 23 (AY23) using H2O2 as an oxidation agent. Before H2O2 addition, MPC (0.80 g/L) at pH 3.0 partly eliminated AY23 (initial 100 ppm) with an adsorption capacity of 14.5 mg/g. In further catalytic oxidation with 200 ppm of H2O2, MPC removed 89.1% of AY23 within 120 min. Moreover, AY23 decolorization with different MPC samples obeyed pseudo-first-order kinetics, with the greatest rate constant being 0.0186 min−1. Interestingly, the utilized MPC samples could be easily removed from the treated media using a magnet. Altogether, the findings suggest that low-cost magnetic porous carbon produced from one-step pyrolysis of FeCl3-loaded nipa frond might be applied to the treatment of acid yellow 23 in wastewater due to its relative adsorption capacity, efficient catalytic performance, and powerful magnetic separability.

Introduction of the Simple One-Step stool Xpert Ultra method to detect TB in children and adults.

SETTING: In 2020, the National TB Programme (NTP) of Vietnam conducted an implementation pilot of the Simple One-Step (SOS) stool processing method using Xpert® MTB/RIF Ultra (Ultra) among children and people living with HIV (PLHIV) with signs and symptoms of TB.DESIGN and OBJECTIVES: Using data from this pilot and collecting information on healthcare workers´ (HCWs) perceptions, we assessed the feasibility, acceptability and potential impact of routine stool testing for TB.RESULTS: HCWs perceived collection of stools from children as least stressful of all sample types, stool processing as acceptable and the SOS stool method as easy to perform. After a 3-month induction period, the proportion of initial non-determinate Ultra stool tests was less than 5%. Combined Ultra testing of a respiratory sample and stool resulted in an increase in the proportion of bacteriologically confirmed TB among PLHIV and children by respectively 4.1% (95% CI 1.6-6.6) and 3.9% (95% CI 1.6-6.2). Among children, Mycobacterium tuberculosis was more often detected in stool (26.1%) than in respiratory samples (23.4%) (P = 0.06), including one child with rifampicin resistance.CONCLUSION: Stool testing can be feasibly implemented both in adult PLHIV and in children in routine settings, providing a non-invasive alternative sample type for the diagnosis of TB for patients who cannot produce sputum.

A Simple One-Step System Enhances the Availability of High-Quality Sperm for Assisted Reproductive Procedures

A Simple One-Step System Enhances the Availability of High-Quality Sperm for Assisted Reproductive Procedures

Synthesis and Electrochemical Characterizations of Nanostructured Cupric Oxide (CuO) Prepared Via a Simple One-Step Thermal Decomposition Method

Synthesis and Electrochemical Characterizations of Nanostructured Cupric Oxide (CuO) Prepared Via a Simple One-Step Thermal Decomposition Method

Synthesis and Electrochemical Characterizations of Nanostructured Cupric Oxide (CuO) Prepared Via a Simple One-Step Thermal Decomposition Method

S. V. Kambale, D. A. Muke, S. H. Shejale, C. M. Mahajan, B. J. Lokhande

The Simple One-step stool processing method for detection of Pulmonary tuberculosis: A study protocol to assess the robustness, stool storage conditions and sampling strategy for global implementation and scale-up.

The Xpert MTB/RIF Ultra (Xpert-Ultra) assay provides timely results with good sensitivity and acceptable specificity with stool specimens in children for bacteriological confirmation of tuberculosis (TB). This study aims to optimize the Simple One-Step (SOS) stool processing method for testing stool specimens using the Xpert-Ultra in children and adults in selected health facilities in Addis Ababa, Ethiopia. The study is designed to assess the robustness of the SOS stool method, to help fine-tune the practical aspects of performing the test and to provide insights in stool storage conditions and sampling strategies before the method can be implemented and scaled in routine settings in Ethiopia as well as globally. The project "painless optimized diagnosis of TB in Ethiopian children" (PODTEC) will be a cross sectional study where three key experiments will be carried out focusing on 1) sampling strategy to investigate if the Xpert-Ultra M. tuberculosis (MTB) -positivity rate depends on stool consistency, and if sensitivity can be increased by taking more than one stool specimen from the same participant, or doing multiple tests from the same stool specimen, 2) storage conditions to determine how long and at what temperature stool can be stored without losing sensitivity, and 3) optimization of sensitivity and robustness of the SOS stool processing method by varying stool processing steps, stool volume, and storage time and conditions of the stool-sample reagent mixture. Stool specimens will be collected from participants (children and adults) who are either sputum or naso-gastric aspiration (NGA) and/or stool Xpert-Ultra MTB positive depending on the experiment. Stool specimens from these participants, recruited from 22 sites for an ongoing related study, will be utilized for the PODTEC experiments. The sample size is estimated to be 50 participants. We will use EpiData for data entry and Stata for data analysis purposes. The main analyses will include computing the loss or gain in the Xpert-Ultra MTB positivity rate and rates of non-determinate Xpert-Ultra test results per experiment compared to the Xpert-Ultra MTB result of stool processed according to the published standard operating procedures for SOS stool processing. The differences in the MTB positivity rate by regarding testing more than one sample per child, and using different storage, and processing conditions, will be also compared to the baseline (on-site) Xpert-Ultra result.

Xpert Ultra stool testing to diagnose tuberculosis in children in Ethiopia and Indonesia: a model-based cost-effectiveness analysis

ObjectivesThe WHO currently recommends stool testing using GeneXpert MTB/Rif (Xpert) for the diagnosis of paediatric tuberculosis (TB). The simple one-step (SOS) stool method enables processing for Xpert testing at the...

Simple One-step Solid-state Synthesis of Highly Crystalline N Doped Carbon Dots As Selective Turn Off-sensor for Picric Acid and Metanil Yellow.

A simple one-step solid-state pyrolysis method has been employed to synthesize highly crystalline nitrogen-doped carbon dots using adipic acid and urea as carbon and nitrogen sources. The prepared carbon dots displayed UV emission ( λex = 290nm and λem = 370nm) and blue fluorescence emission ( λex = 360nm and λem = 420nm). These crystalline nitrogen-doped carbon dots exhibited a quantum yield of 6% with tryptophan as standard at 370nm emission and 14% with quine sulfate as standard at 420nm emission. The synthesized carbon dots were spherical, having a mean particle diameter of 2.56 ± 0.57nm. The prepared carbon dots have large functional groups on their surface, which renders excellent water solubility to them. Carbon dots was used as selective and sensitive turn off sensor for detection of picric acid Metanil yellow with the linear response for picric acid ranging from 2μM to 22μM and 2-45μM with a detection limit of 0.06μM and 0.45μM and for Metanil yellow ranging from 1μM to 30μM with a detection limit of 0.32μM. The mechanism for detecting metanil yellow is proposed to be the inner filter effect. At the same time, it is both the inner filter effect and FRET for picric acid. The actual sample application of carbon dots as a nanosensor was tested to detect metanil yellow as an adulterant in turmeric powder.

Fabricating amide functional group modified hyper-cross-linked adsorption resin with enhanced adsorption and recognition performance for 5-hydroxymethylfurfural adsorption via simple one-step

In this study, three kinds of amide functional group modified hyper-cross-linked adsorption resin were synthesized by alternating radical copolymerization in simple one-step and applied for 5-hydroxymethylfurfural (5-HMF) adsorption. The successful synthesis and properties of adsorbents were evaluated with Fourier transform infrared spectroscopy, scanning electron microscopy, nitrogen adsorption–desorption isotherms, thermogravimetric analysis, and elemental analysis. Poly ( N , N ′-4,4′-diphenylmethane-bismaleimide-alt-divinylbenzene) (poly (BDM-alt-DVB)) resin exhibited highest adsorption capacity for 5-HMF (64.0 mg·g −1 wet resin) and excellent adsorption selectivity ( α 5-HMF/LA = 2.71 ± 0.12, α 5-HMF/FA = 13.88 ± 0.15, α 5-HMF/Glucose = 11.91 ± 1.11) in the multi-component solution at 25 °C. Langmuir isotherm model well fitted the equilibrium adsorption data within the initial 5-HMF concentration range of 0.5–10.0 g·L −1 with highest correlation coefficient. Furthermore, the thermodynamic parameters demonstrated that the adsorption of 5-HMF onto poly (BDM-alt-DVB) resin was spontaneous and exothermic. Kinetic study revealed that the adsorption process was fast, reaching equilibrium within 12 min. Importantly, the poly (BDM-alt-DVB) resin also demonstrated excellent reusability. In summary, the poly (BDM-alt-DVB) resin will be useful in 5-HMF hydrolysate separation applications.

A Simple One-Step Modification of Shrimp Shell for the Efficient Adsorption and Desorption of Copper Ions.

Removing toxic heavy metal species from aqueous solutions is a point of concern in our society. In this paper, a promising biomass adsorbent, the modified waste shrimp shell (MS), for Cu (II) removal was successfully prepared using a facile and simple one-step modification, making it possible to achieve high-efficiency recycling of the waste NaOH solution as the modification agent. The outcome shows that with the continuous increase in pH, temperature and ion concentration, the adsorption effect of MS on Cu (II) can also be continuously improved. Adsorption isotherm and adsorption kinetics were fitted with the Langmuir isotherm model and the pseudo-second-order model, respectively, and the maximum adsorption capacity of Cu (II) as obtained from the Langmuir isotherm model fitting reached 1.04 mmol/g. The systematic desorption results indicated that the desorption rate of Cu (II) in the MS could reach 100% within 6 min, where HNO3 is used as the desorption agent. Moreover, experiments have proven that after five successive recycles of NaOH as a modifier, the adsorption capacity of MS on Cu (II) was efficient and stable, maintaining tendency in 0.83–0.85 mmol/g, which shows that waste NaOH solution can be used as a modification agent in the preparation of waste shrimp shell adsorbent, such as waste NaOH solution produced in industrial production, thereby making it possible to turn waste into renewable resources and providing a new way to recycle resources.

The Simple One-Step (SOS) Stool Processing Method for Use with the Xpert MTB/RIF Assay for a Child-Friendly Diagnosis of Tuberculosis Closer to the Point of Care.

ABSTRACTYoung children cannot easily produce sputum for diagnosis of pulmonary tuberculosis (TB). Alternatively, Mycobacterium tuberculosis complex bacilli can be detected in stool by using the Xpert MTB/RIF (Ultra) assay (Xpert). Published stool processing methods contain somewhat complex procedures and require additional supplies. The aim of this study was to develop a simple one-step (SOS) stool processing method based on gravity sedimentation only, similar to Xpert testing of sputum samples, for the detection of M. tuberculosis in stool samples. We first assessed whether the SOS stool method could provide valid Xpert results without the need for bead-beating, dilution, and filtration steps. We concluded that this was the case, and we then validated the SOS stool method by testing spiked stool samples. By using the SOS stool method, 27 of the 29 spiked samples gave valid Xpert results, and M. tuberculosis was recovered from all 27 samples. The proof of principle of the SOS stool method was demonstrated in routine settings in Addis Ababa, Ethiopia. Nine of 123 children with presumptive TB had M. tuberculosis-positive results for nasogastric aspiration (NGA) samples, and 7 (77.8%) of those children also had M. tuberculosis-positive Xpert results for stool samples. Additionally, M. tuberculosis was detected in the stool samples but not the NGA samples from 2 children. The SOS stool processing method makes use of the standard Xpert assay kit, without the need for additional supplies or equipment. The method can potentially be rolled out to any Xpert site, bringing a bacteriologically confirmed diagnosis of TB in children closer to the point of care.

Simple One-Step Leaf Extract-Assisted Preparation of α-Fe2O3 Nanoparticles, Physicochemical Properties, and Its Sunlight-Driven Photocatalytic Activity on Methylene Blue Dye Degradation

Hematite nanoparticles have been prepared from Moringa oleifera leaf extracts. Phytochemicals are derived from plant extracts which act as a stabilizing and capping agent as well as a surfactant. This green route protocol is attractive owing to its speed, reliability, and ecofriendly and cost-effective qualities. The synthesized iron oxide nanoparticles were subjected to three different calcination temperatures (500, 600, and 700°C). The crystallinity nature and phase purity have been confirmed by powder X-ray diffraction (PXRD). Optical properties have been studied by UV-visible (UV-vis) and diffuse reflectance spectroscopy (DRS). A very narrow bandgap was observed, and absorbance was observed at the visible region. Photoluminescence spectra have exhibited a multicolor emission band from the near UV to visible region due to defect centers (F centers). EDX (energy dispersive X-ray spectrum) has given information on the stoichiometric ratio of Fe and O. The functional groups which are responsible for nanoparticle formation have been identified by Fourier transformed infrared spectroscopy (FTIR), surface morphology transformation has been illustrated by scanning electron microscopy (SEM) studies, and VSM measurements have exhibited a hysteresis curve that shows the weak and strong ferromagnetic behavior in nature at RT. TEM micrographs have confirmed that particles are in the nanorange, matching the results from the XRD report. The SAED pattern gives information on the polycrystalline nature of hematite nanoparticles. TG-DSC characterization revealed phase transition, decomposition, and weight loss information. Frequency-dependent electrical properties were studied. Here, we report what the present studies have revealed: that hematite nanopowder prepared from the green route is environmentally friendly, takes a short time to prepare, is an economical and promising candidate material for electromagnetic devices and ferromagnet manufacturing, and is a photocatalyst in water treatment applications without adding additives (H2O2).

Improving Performance of Lead Acid Battery by Simple One-Step Modification of Absorbed Glass Mat Separator

Improving Performance of Lead Acid Battery by Simple One-Step Modification of Absorbed Glass Mat Separator