Simple Glass Research Articles

Simple Fluctuations in Simple Glass Formers.

Critical single-particle fluctuations associated with particle displacements are inherent to simple glass-forming liquids in the limit of large dimensions and leave a pseudocritical trace across all finite dimensions. This characteristic could serve as a crucial test for distinguishing between theories of glass formation. We here examine these critical fluctuations, as captured by the well-established non-Gaussian parameter, within both mode-coupling theory (MCT) and dynamical mean-field theory (DMFT) across dimensions for hard sphere fluids and for the minimally structured Mari-Kurchan model. We establish general scaling laws relevant to any liquid dynamics theory in large dimensions and show that the dimensional scalings predicted by MCT are inconsistent with those from DMFT. Simulation results for hard sphere fluids in moderately high dimensions align with the DMFT scenario, reinforcing the relevance of mean-field theory for capturing glass physics in finite dimensions. We identify potential adjustments to MCT to account for certain mean-field physics. Our findings also highlight that local structure and spatial dimensionality can affect single-particle critical fluctuations in nontrivial ways.

Thermodynamic modeling of the structure of alkali aluminophosphate glasses and their ionic conductivity

AbstractThis study presents the structural and ionic conductivity thermodynamic modeling for glasses with compositions in the system 50M2O‐xAl2O3‐(50 − x)P2O5, with M = Li or K. The Shakhmatkin and Vedishcheva thermodynamic model (SVTDM), or associated solutions model, has been previously used in successfully predicting the structure of simple binary phosphate glasses and it has now been employed with the aim to discerning the model's capability to predict the structural changes induced in the phosphate network by the addition of alumina. The results have been furthermore validated through their comparison with literature experimental data on the structural characterization of the glasses by 31P NMR measurements as well as on ionic conductivity determined by impedance spectroscopy. Although this methodology demonstrates good agreement with experimental data on the structure of aluminophosphate glasses, some disparities persist, potentially arising from experimental uncertainties. However, SVTDM faces limitations, including the need for comprehensive knowledge of stable phases and their formation energies. Predictions of ionic conductivity, though promising, exhibit deviations from experimental values, attributed to factors such as the influence of the chemical environment on dielectric properties. To enhance accuracy in conductivity prediction, a deeper understanding of additional variables such as dielectric constant and attempt frequency is imperative.

Self‐reduction triggered color tuning of Eu3+‐doped aluminosilicate glass for solid‐state white illumination

AbstractRare earth‐doped transparent glass, boasting high transmittance and excellent luminescent properties, holds great potential in the field of all‐inorganic solid‐state white illumination. Currently reported single‐structure solid‐state white lighting usually has the problems of low color rendering index (CRI) and high correlated color temperature (CCT) due to the lacking of red light emission. In this work, a novel single‐structure MgO–Al2O3–SiO2–Eu2O3 (MAS: Eu) glass with color tuning was prepared by the simple glass melting process. Interestingly, the prepared Eu3+‐doped aluminosilicate glass possessed a unique capability to achieve color emission under different excitation wavelengths. The reason for this was attributed to the good self‐reduction capability of the MAS glass, which effectively reduced Eu3+ to Eu2+ under an air atmosphere. Meanwhile, only by regulating the Eu3+ doping concentration, the MAS glass also achieved a tunable emission from blue to white to red light under 380 nm excitation. The acquisition of white light was realized through the multispectral emission of blue–green light emitted by Eu2+ and orange–red light emitted by Eu3+. Remarkably, the single‐structure MAS glass doped with 8 wt.% Eu3+ successfully achieved high‐quality white light and high thermal stability, exhibiting a high CRI of 86, a low CCT of 2761 K, good chromaticity parameters of (0.407 and 0.3192), and the emission intensity at 423 K remains above 86.35% that of room temperature. Meanwhile, the doped Eu3+ exceeded 12 wt.%, without any observable concentration quenching. Moreover, the MAS: Eu glass showed a high transmittance of 90 and a moderate thermal conductivity of 1.45 W/mK (epoxy resin ∼0.17 W/mK). These results would dramatically inspire the development of high‐quality solid‐state white lighting applications.

Synthesis of Porous Carbons from Candlenut Shells Using Various Types of Activators for Environmentally Friendly Supercapacitors

Porous carbon is one of the promising electrode materials for supercapacitors due to its unique and engineerable microstructural properties. The study of the synthesis of porous carbon from waste biomass is very important due to the abundance of natural resources, low cost production and contribute to solving environmental problems. In this study, porous carbons derived from candlnut shell with various type of activator was studied the chemical structural, morphological and electrochemical properties then evaluated as electrodes for supercapacitor. We have been successfully synthesized of porous carbon from candlenut shells using three steps of the process, i.e.: carboni-zation, activation and calcination. Carbonization was carried out at 700°C in a furnace using a closed crucible to minimize the oxygen. The chemical activation conducted using three types of activators, i.e. ZnCl2, H3PO4 and KOH then calcination process by heated at 800°C for 1 h under Ar flow. The results of the Fourier-transform infrared (FTIR) analysis show that the carbonization process increases the content of aromatic C=C functional groups and reduce the OH, C-H, C-O and C=O functional groups. The carbonization process has also increased the electrical conductivity of the sample around 0.8525 S/m. The results of Scanning Electron Microscope (SEM) images can be observed that the activation process of carbon has formed which was indicated by the appearance of many pores on the surface area of carbon. N2 adsorption/desorption isotherms (Brunauer–Emmett–Teller (BET)) characterization was indicated that the porous carbon is dominated by mesoporous with a pore size around 2-50 nm. BET characterization also can be determined the surface area of porous carbon around 477 m2/g for ZnCl2, 636 m2/g for H3PO4, and 681 m2/g for KOH. This synthesized materials are further employed in a symmetric supercapacitor using simple glass cell. The best performance of supercapacitor achieved by KOH porous carbons with 16.30 F/g of specific capacitance, 2.26 Wh/kg of energy density and 1038 W/kg of power density.

Thermal conductivity in modified sodium silicate glasses is governed by modal phase changes.

The thermal conductivity of glasses is well-known to be significantly harder to theoretically describe compared to crystalline materials. Because of this fact, the fundamental understanding of thermal conductivity in glasses remain extremely poor when moving beyond the case of simple glasses, e.g., glassy SiO2, and into so-called "modified" oxide glasses, that is, glasses where other oxides (e.g., alkali oxides) have been added to break up the network and alter, e.g., elastic and thermal properties. This lack of knowledge is apparent despite how modified glasses comprise the far majority of known glasses. In the present work, we study an archetypical series of sodium silicate [xNa2O-(100 - x)SiO2] glasses. Analyses of modal contributions reveal how increasing Na2O content induces increasing vibrational localization with a change of vibrations to be less ordered and a related general decrease in modal contributions to thermal conductivity. We find the vibrational phases (acoustic vs optical) of sodium vibrations to be relatively disordered compared to the network-forming silicon and oxygen species, explaining how increasing Na2O content decreases thermal conductivity. Our work sheds new light on the fundamentals of glassy heat transfer as well as the interplay between thermal conduction and modal characteristics in glasses.

International Simple Glass (ISG) dissolution rate in a (Si, Ca)-rich environment at 90 °C and alkaline conditions

The dissolution of International Simple Glass (ISG) was investigated at 90 °C and alkaline conditions with various concentrations of dissolved Si and Ca to unravel the combined effects of those elements on ISG reactivity. Experiments were conducted over durations ranging from 20 days to 3 months. Through morphological, structural, and chemical characterizations, the glass dissolution rate was proven to be strongly correlated with the activity of dissolved silica in the solution. While dissolved calcium did not significantly impact the dissolution rate, precipitation of calcium silicate hydrates (CSH) during the experiments enhanced ISG dissolution rate, though to a modest extent. The 3-months experiments highlighted the strong correlation between the dissolution mechanism and the evolution of the nature of secondary phases in saturated solution. During the first 20 days and at high Si and Ca concentrations, CSH precipitated and aggregated, without preventing the passivating impact of the gel layer at the surface of the glass: the dissolution was controlled by diffusion. Then, a resumption of dissolution occurred between 19 days and 76 days, corresponding to the CSH growth, and a possible mechanistic switch to a hydrolysis-controlled reaction rate. Finally, in some experiments, a drop in pH due to carbonate precipitation was observed along with a decrease in the dissolution rate, falling back in a diffusion-limited regime. Overall, this study shows that at 90 °C, pH = 10 and concentrations of SiO2(aq) exceeding 50 % of saturation with respect to amorphous silica, irrespective of Ca concentration but in presence of CO2(aq), ISG exhibits a very good chemical durability.

Influence of high-pressure on the short-range structure of Ca or Na aluminoborosilicate glasses from 11B and 27Al solid-state NMR

The present study investigates the boron and aluminium speciation of aluminoborosilicate glasses synthesised under ambient to high-pressure conditions (up to 2.0 GPa) using 11B and 27Al Nuclear Magnetic Resonance. Four glass series were prepared in the SiO2-Al2O3-B2O3-Na2O/CaO system, with either high or low R' values (R'=([Na2O]+[CaO])/([B2O3]+[Al2O3])). 11B NMR reveals a linear increase in four-coordinated boron (BO4) with pressure for Ca glasses and non-linear with a plateau between 0.5 and 1.5 GPa for Na glasses. 27Al NMR reveals minimal pressure impact on aluminium coordination in sodium glasses. Conversely, calcium glasses form higher-coordinated AlO5 and AlO6 units under pressure. The determination of non-bridging oxygen (NBO) variation witnesses the change in compensation mechanism for boron species. In low R' glasses, limited NBOs suggest Na+/Ca2+ release from AlO4 as the primary compensation source. This work sheds light on pressure's influence on network connectivity in simple glasses, aiding the understanding of complex glass behaviour.

A self-healing multispectral transparent adhesive peptide glass.

Despite its disordered liquid-like structure, glass exhibits solid-like mechanical properties1. The formation of glassy material occurs by vitrification, preventing crystallization and promoting an amorphous structure2. Glass is fundamental in diverse fields of materials science, owing to its unique optical, chemical and mechanical properties as well as durability, versatility and environmental sustainability3. However, engineering a glassy material without compromising its properties is challenging4-6. Here we report the discovery of a supramolecular amorphous glass formed by the spontaneous self-organization of the short aromatic tripeptide YYY initiated by non-covalent cross-linking with structural water7,8. This system uniquely combines often contradictory sets of properties; it is highly rigid yet can undergo complete self-healing at room temperature. Moreover, the supramolecular glass is an extremely strong adhesive yet it is transparent in a wide spectral range from visible to mid-infrared. This exceptional set of characteristics is observed in a simple bioorganic peptide glass composed of natural amino acids, presenting a multi-functional material that could be highly advantageous for various applications in science and engineering.

Energetical effect of electrochromic glazing on the double-skin façade of the building in different climates

Today, energy has an essential role in the world’s future, and managing its consumption can be very influential and crucial in human life. Most of the energy consumption in any country is related to building. The aim of writing this article is to investigate the effect of combining electrochromic glazing and double skin facades. For this purpose, a double skin facade building with simple glass and a building in which electrochromic is used in the second layer of the facade were compared. These buildings were designed by Design Builder. The results demonstrated significant reductions in energy consumption in the second case. To study the effect of weather on the performance of this system, four cities in Iran with diverse climates have been selected. The energy consumption of cooling, heating, lighting, electricity, and gas utilization of the same building in different climates was studied. Using electrochromic glazing in the double-skin facade reduced the annual electrical consumption of the entire building by up to 3.5% for hot_humid weather. Also, the total annual gas consumption of the building was reduced up to 22.7% for hot and dry weather.

Dynamics and fluctuations of minimally structured glass formers.

The mean-field theory (MFT) of simple structural glasses, which is exact in the limit of infinite spatial dimensions, d→∞, offers theoretical insight as well as quantitative predictions about certain features of d=3 systems. In order to more systematically relate the behavior of physical systems to MFT, however, various finite-d effects need to be accounted for. Although some efforts along this direction have already been undertaken, theoretical and technical challenges hinder progress. A general approach to sidestep many of these difficulties consists of simulating minimally structured models whose behavior smoothly converges to that described by the MFT as d increases, so as to permit a controlled dimensional extrapolation. Using this approach, we here extract the small fluctuations around the dynamical MFT captured by a standard liquid-state observable, the non-Gaussian parameter α_{2}. The results provide insight into the physical origin of these fluctuations as well as a quantitative reference with which to compare observations for more realistic glass formers.

From creep to flow: Granular materials under cyclic shear

When unperturbed, granular materials form stable structures that resemble the ones of other amorphous solids like metallic or colloidal glasses. Whether or not granular materials under shear have an elastic response is not known, and also the influence of particle surface roughness on the yielding transition has so far remained elusive. Here we use X-ray tomography to determine the three-dimensional microscopic dynamics of two granular systems that have different roughness and that are driven by cyclic shear. Both systems, and for all shear amplitudes Γ considered, show a cross-over from creep to diffusive dynamics, indicating that rough granular materials have no elastic response and always yield, in stark contrast to simple glasses. For the system with small roughness, we observe a clear dynamic change at Γ ≈ 0.1, accompanied by a pronounced slowing down and dynamical heterogeneity. For the large roughness system, the dynamics evolves instead continuously as a function of Γ. We rationalize this roughness dependence using the potential energy landscape of the systems: The roughness induces to this landscape a micro-corrugation with a new length scale, whose ratio over the particle size is the relevant parameter. Our results reveal the unexpected richness in relaxation mechanisms for real granular materials.

Graphite counter electrode modified Tropaeolin‐O photo‐sensitized photogalvanic cells for solar power and storage

AbstractAn optimization, photo‐stability, and hysteresis property of the Graphite counter electrode‐modified Tropaeolin‐O (TPO) photo‐sensitized photogalvanic (PG) cells has been investigated. A complex H‐shaped cell design, a costly and delicate saturated calomel electrode (counter electrode), and a heavy sensitizer molecule (dye having high molecular weight, low diffusivity, and low photo‐stability) have been exploited for fabricating most of the PG cells so far. All these factors are not suitable for the fabrication of durable and cheap PG cells. Therefore, in the present study, the highly conductive/catalytically active robust graphite electrode with TPO dye photosensitizer (having a low molecular weight, higher diffusivity, and higher photo‐stability) has been exploited with diffusion‐friendly low cost and a simple transparent cylindrical glass tube. The cheap and robust graphite counter electrode has been exploited for optimization and long‐term study of the TPO photo‐sensitized PG cells. The observed electrical output is potential 676 mV, current 2000 µA, and power 340.0 μW. The power, current, and efficiency, have been found quite independent of the illumination window size. The potential and current have been observed to be quite stable over a long time during illumination, and the same has been supported by the hysteresis study.

Gravimetric and Thermal-Imaging Characterization of Water-Free Reflux Condensers for Laboratory Applications.

Water-free reflux condensers, which use convective cooling from the surrounding air to condense vapors, avoid the need for cooling water, which is more sustainable than water-cooled condensers, and eliminates the risk of flooding, but these devices are newer and less familiar to many chemists, who may never have used them before. To facilitate the shift to water-free condensers, several types of water-free condensers (simple glass tube, Vigreux column, Condensyn, Findenser, and air-cooled Dimroth) were characterized using three different solvents (ethyl acetate, acetone, and tetrahydrofuran) under both gentle and vigorous refluxing conditions to compare their relative performance and determine the condensing capacity/failure point. In addition to experimentally quantifying the performance of each condenser both gravimetrically and via infrared thermal imaging, energy-balance models were developed to gain insight into which factors were most important in driving their performance. Several of the water-free condensers, including the Findenser, Condensyn, and air-cooled Dimroth condenser, were shown to provide suitable performance for most refluxing operations.

Improving the Temporal Accuracy of Eye Gaze Tracking for the da Vinci Surgical System through Automatic Detection of Decalibration Events and Recalibration

Robust and accurate eye gaze tracking can advance medical telerobotics by providing complementary data for surgical training, interactive instrument control, and augmented human–robot interactions. However, current gaze tracking solutions for systems such as the da Vinci Surgical System (dVSS) are limited to complex hardware installations. Additionally, existing methods do not account for operator head movement inside the surgeon console, invalidating the original calibration. This work provides an initial solution to these challenges that can seamlessly integrate into console devices beyond the dVSS. Our approach relies on simple and unobtrusive wearable eye tracking glasses and provides calibration routines that can contend with operator-head movements. An external camera measures movement of the glasses through trackers mounted on the glasses to detect invalidation of the prior calibration from head movement and slippage. Movements beyond a threshold of 5 cm or 9ˆ∘ prompt another calibration sequence. In a study where users moved freely in the surgeon console after an initial calibration procedure, we show that our system tracks the eye tracking glasses to initiate recalibration procedures. Recalibration can reduce the mean tracking error up to 89% compared to the current prevailing approach which relies on the initial calibration only. This work is an important first step towards incorporating user movement into gaze-based applications for the dVSS.

Development of an arrayed ultrasonic sensor using surface plasmon resonance (SPR)

Surface plasmon resonance (SPR) ultrasonic sensors are non-resonant and expected to show flat frequency response over a wide frequency range. Then, the sensors seem suitable for the detection of photoacoustic waves. We have developed a simple glass prism SPR sensor with thin Ag layer (deposited by an electron beam evaporator) and checked the frequency response as a function of Ag area diameter. The diameter of 1 mm was sufficient to obtain better frequency response than that of the calibrated needle transducer in the range of 2.5 to 7.0 MHz. By covering a very thin Au film on the Ag layer, we succeeded in longer working time (>6 months) of the sensor. An array-type SPR sensor (5 × 5, diameter of each sensor 1 mm) has also been fabricated to evaluate pressure distribution of ultrasonic waves. The response of each sensor was similar, telling the high reproducibility of the sensor fabrication.

Glasslike caging with random planes.

The richness of the mean-field solution of simple glasses leaves many of its features challenging to interpret. A minimal model that illuminates glass physics in the same way that the random energy model clarifies spin glass behavior would therefore be beneficial. Here we propose such a real-space model that is amenable to infinite-dimensional d→∞ analysis and is exactly solvable in finite d in some regimes. By joining analysis with numerical simulations, we uncover geometrical signatures of the dynamical and jamming transitions and obtain insight into the origin of activated processes. Translating these findings into the context of standard glass formers further reveals the role played by nonconvexity in the emergence of Gardner and jamming physics.

Anisotropic-Isotropic Transition of Cages at the Glass Transition.

Characterizing the local structural evolution is an essential step in understanding the nature of glass transition. In this work, we probe the evolution of Voronoi cell geometry in simple glass models by simulations and colloid experiments, and find that the individual particle cages deform anisotropically in supercooled liquid and isotropically in glass. We introduce an anisotropy parameter k for each Voronoi cell, whose mean value exhibits a sharp change at the mode-coupling glass transition ϕ_{c}. Moreover, a power law of packing fraction ϕ∝q_{1}^{d} is discovered in the supercooled liquid regime with d>D, in contrast to d=D in the glass regime, where q_{1} is the first peak position of structure factor, and D is the space dimension. This power law is qualitatively explained by the change of k. The active motions in supercooled liquid are spatially correlated with long axes rather than short axes of Voronoi cells. In addition, the dynamic slowing down approaching the glass transition can be well characterized through a modified free-volume model based on k. These findings reveal that the structural parameter k is effective in identifying the structure-dynamics correlations and the glass transition in these systems.

Dispersion, ionic bonding and vibrational shifts in phospho-aluminosilicate glasses.

Understanding the relationships between structure and properties of aluminosilicate glasses is of interest in magmatic studies as well as for glass applications as mechanical or optical components. Glass properties may be tailored by the incorporation of additional elements, and here we studied the effect of phosphate incorporation on refractive index and the degree of ionic bonding in aluminosilicate glasses. The studied glasses in the system SiO2-Al2O3-Na2O-P2O5 had a metaluminous composition (Al:Na = 1) with the content of SiO2 ranging from 50 to 70 mol% and of P2O5 from 0 to 7.5 mol%. Refractive index was measured at four wavelengths from visible to near-infrared and found to decrease both with increasing P2O5 content (at the expense of NaAlO2) and with increasing SiO2 content (by substitution of SiO4 for AlO4 groups). This trend correlated with a decrease in density while, additionally, the formation of Al-O-P bonds with an SiO2-like structure may account for this change. The degree of ionic bonding, assessed via optical basicity and oxygen polarisability, decreased with increasing P2O5 and SiO2 content. Despite the complexity of the studied glasses, oxygen polarisability and optical basicity were found to follow Duffy's empirical equation for simple oxide glasses. In the high frequency infrared and Raman spectra, band shifts were observed with increasing P2O5 and SiO2 content. They indicated changing average bond strength of the glass network and showed a linear correlation with optical basicity.

Dissolution of simulated nuclear waste glass at high surface area to solution volume, high pH and 70 °C: comparison of international simple glass and SON68 glass.

Long-term static dissolution experiments, lasting up to ∼1500 days, were conducted on International Simple Glass (ISG) and SON68 glass under hyperalkaline pH, at 70 °C, and at a very high glass surface area to solution volume ratio. The study compared (1) glass dissolution kinetics, (2) secondary phase formation, and (3) the microstructure of the altered glass and secondary phase interface. Boron release indicated rapid initial dissolution followed by a slowdown mainly due to a significant pH drop. ISG reached a residual rate regime, while SON68 approached this regime near the experiment's end, with both glasses having similar final dissolution rates. Electron microscopy (SEM, TEM, EDS) of the reacted glass surfaces and the alteration products revealed nontronite formation on SON68, while C(A)SH phases and later rhodesite appeared on ISG, in addition to phillipsite-type zeolite formation observed in both experimental series. TEM observations revealed a porous, foam-like surface altered layer (SAL) near the pristine glass. SON68's SAL nanostructure, more complex than ISG's, had two porous zones, hindering water transfer and glass constituent release, in addition to a pH drop reducing silica network hydrolysis. TEM-EDS showed cation exchange and iron depletion in SON68's SAL, leading to nontronite formation. Secondary phases at the SAL-solution interface did not destabilize the SAL, and no alteration resumption was observed due to the pH drop below the threshold necessary for an alteration resumption due to zeolite formation. In conclusion, the combination of alkaline conditions and very high reaction progress does not lead to the dissolution of the glass by a dissolution-reprecipitation mechanism, as typically observed at much lower SA/V ratios. At the relatively mildly alkaline pH reached within the first year of the experiments, the diffusion of cations through the SAL becomes rate-controlling.

Development of Optical Equipment Learning Media with the Utilization of Used Goods in Elementary School Science Subjects

The problem that often occurs in the science learning process is the lack of involvement of students in using learning media, this is due to the lack of learning media available in schools. This study aims to test the feasibility of optical instrument learning media products with the use of used goods in elementary school science subjects. This type of research uses the R&D (Research and Development) model ADDIE (Analysis, Design, Development, Implementation, and Evaluation). The subjects used were 9 grade IV students of SDN Sumberasri 04 Blitar. Data collection in the form of interview results, expert validation sheets, student response questionnaires, and observation sheets. Data analysis in the form of qualitative data analysis and quantitative data analysis. The questionnaire used is in the form of Likert scale. The results showed validation carried out by media experts on simple microscope products 91.66%, simple magnifying glasses 95.85%, and simple periscopes 95.85%, and the response of students obtained an average score of 3.55. The results stated that media products are classified as very suitable for use in elementary school science learning