Similar Physicochemical Characteristics Research Articles

Physicochemical characteristics and nutritional value of safflower oil: A potential sustainable crop for Egypt

Background: The Increasing demand for sustainable and economical non-traditional edible oils, as alternatives to common oils is pivotal to bridge the edible oils gap, coupled with negative impacts of climate change on the agroecological settings for common oilseed crop productivity. Safflower, being one of the fast-growing medicinal oilseeds crops rich in polyunsaturated fatty acids, known as the “king of linoleic acid”, exhibits resilience to adverse environmental conditions such as high temperatures, drought, salinity, and marginal environments. Aims: This study aimed to comprehensively assess the physicochemical characteristics and lipid nutritional indices of safflower oil to validate its potential for expanded cultivation in Egypt. Materials and Methods: Safflower oil was extracted from seeds of two spineless varieties cultivated in Egypt. The oil was subjected to proximate analysis, physicochemical characterization, fatty acid profile determination, and α-tocopherol content analysis. Additionally, a frying stability test was carried out for safflower oil and its blends with soybean oil in different ratios, monitoring changes in free fatty acid, peroxide value, and total polar compounds. Lipid nutritional indices were calculated to assess the oil’s health-promoting properties. Results: Safflower oil exhibited similar proximate composition and physicochemical characteristics to sunflower oil. The fatty acid profile of safflower oil was comparable to sunflower oil, with a lower oleic acid content and a higher linoleic acid content. Furthermore, safflower oil demonstrated satisfactory stability during the frying process. Lipid nutritional indices calculated based on the fatty acid profile revealed that safflower oil is a valuable source of ω-6 fatty acids. The oil exhibited favorable values for atherogenicity index (AI), thrombogenicity index (TI), hypocholesterolemic / hypercholesterolemic (HH), health-promoting index (HPI), and possessed strong antioxidant properties due to its high α-tocopherol content. Conclusion: The findings of this study support the potential of safflower oil as a promising non-traditional edible oil, suitable for expanded cultivation in Egypt. Its favorable nutritional profile and stability make it a valuable addition to the dietary landscape. Keywords: Carthamus tinctorius L., safflower oil, edible oil gap, lipid nutritional indices, frying stability, non-traditional edible oils.

LOMU Type Alkali Basalts in East Asia Sourced from Subduction Recycling of Multiple Ancient Crustal Components

Abstract The origin of alkali basalts with distinctive time-integrated low U/Pb (low μ, LOMU) from East Asia is controversial due to the complex geochemical and tectonic signatures reported from this region. We report new data on the petrology and geochemistry of the Higashi-Matsuura and Kita-Matsuura alkali basalts from Southwest Japan, which confirm the presence of a LOMU-type mantle component below the Japanese Islands, similar to East Asian intraplate volcanoes. We use whole rock geochemistry and mineral chemistry to determine mantle melting, magma evolution conditions and isotopic evolution of the LOMU mantle source. Petrological studies show that the Higashi-Matsuura alkali basalts (~3 Ma) were derived from a hydrous mantle source with ~880 μg/g H2O, at a pressure of 1.8 to 2.3 GPa at a mantle potential temperature of ~1300°C. Trace element modelling concludes that these basalts may have been generated through the hydrous upwelling and partial melting of the asthenospheric mantle containing ~15% dehydrated eclogitic component. Higashi-Matsuura alkali basalts show 206Pb/204Pb values of 17.72 to 18.04 which are among the lowest values from Southwest Japan. Relatively older (6–8 Ma) alkali basalts from the Kita-Matsuura area showing similar physicochemical characteristics, do not show LOMU-type isotopic trends. Trace element and Pb–Sr–Nd isotopic data indicate that the Higashi-Matsuura mantle component is similar to the extreme LOMU components reported from the Northeast China alkali basalts, as well as the recently discovered Petit Spot volcanoes on the Pacific Plate. We model the origin of the LOMU signature from the lowest reported Pb isotope ratios in East Asia, from intraplate alkali basalts in Northeast China. Our model suggests that at least two separate subduction events of marine sediments, at 1.8 and 2.2 Ga, are required to explain the observed Pb isotopic variation in the East Asian region. Other LOMU type basalts from East Asia, including Southwest Japan and Petit Spot, define a linear trend between the Xiaogulihe basalts and lithospheric mantle xenoliths, with 40% to 60% Pb in Higashi-Matsuura basalts being derived from the lithospheric mantle during upwelling. This suggests that the LOMU array in East Asia may have been formed by mixing between multiple ancient, subducted sediment components accumulated at the mantle transition zone for about 2 billion years, and its recent upwelling due to dehydration of the stagnant Pacific slab and related melting of the metasomatised asthenospheric mantle.

Identification of the ribosomal protein L18 (RPL18) gene family reveals that TaRPL18-1 positively regulates powdery mildew resistance in wheat

The Ribosomal protein L18 (RPL18) protein gene family plays an important role in plant growth, development and stress response. Although the RPL18 genes have been identified in several plant species, the RPL18 gene family in wheat (Triticum aestivum) is still unexplored. This study found 8 TaRPL18 genes, each of which has a significantly different gene sequence length and is evenly distributed on the chromosome; Additionally, these proteins have similar physicochemical characteristics as well as secondary and tertiary structures. 17 RPL18 genes in 4 species (wheat, Arabidopsis, rice, and maize) were classified into 5 groups, and the TaRPL18 genes within the same group showed similar structures and conserved motifs. Analysis of the cis-acting elements in the TaRPL18 genes promoter regions revealed the presence of developmental and stress-responsive elements in the majority of the genes. Through yeast two-hybrid (Y2H) experiments, it was confirmed that the powdery mildew resistance protein TaPm46 physically interacts with the Class IV TaRPL18-1. Functional analysis indicated that TaRPL18-1-silenced wheat plants show reduced resistance to powdery mildew compared to the wild type (WT), with decreased expression levels of PAL and PPO genes, and increased expression levels of the PR gene. The findings of this study provide a basis for clarifying the function of the TaRPL18 genes and will be useful for the selection of disease-resistant varieties of wheat.

AVT04: An Ustekinumab Biosimilar.

AVT04 (Uzpruvo®) is a biosimilar of the reference anti-interleukin (IL)-12 and IL-23 monoclonal antibody ustekinumab. It is approved in the EU for plaque psoriasis, paediatric plaque psoriasis, psoriatic arthritis and Crohn's disease as per the reference product. AVT04 has similar physicochemical characteristics to those of reference ustekinumab, and the pharmacokinetic similarity of the agents has been shown in healthy volunteers and patients with moderate to severe chronic plaque psoriasis. AVT04 demonstrated clinical efficacy similar to that of reference ustekinumab in patients with moderate to severe chronic plaque psoriasis, and was generally well tolerated in this population. The tolerability, safety and immunogenicity profiles of AVT04 were similar to those of reference ustekinumab, and switching from reference ustekinumab to AVT04 had no impact on efficacy, safety or immunogenicity. The role of reference ustekinumab in the management of inflammatory diseases is well established and AVT04 provides an effective biosimilar alternative for patients requiring ustekinumab therapy.

Facile metal-free synthesis of thiazolo[5,4-d]thiazole-containing conjugated polymers for thin-film electronics

Herein, we report the facile metal-free polycondensation reaction between dicarbonyl derivative and dithioxamide for the synthesis of thiazolo[5,4-d]thiazole-based semiconductor polymer. We showed that the polymers obtained by classical Suzuki or Stille reactions and proposed metal-free polycondensation possess similar optoelectronic and physicochemical characteristics. Their application as hole-transport layers in perovskite solar cells (PSCs) showed that the polymer obtained by an alternative method provides comparable or even slightly higher performance of devices. These results illustrate availability of organic semiconductor materials via alternative green and sustainable polycondensation reaction for the state-of-the-art photovoltaic technologies.

Evaluation of Yield and Physicochemical Quality of Pentadesma butyracea Butter Obtained by Different Traditional Extraction Methods in Ghana.

Pentadesma butyracea seed butter or fat (PBSB) is a vegetable fat extracted from the seeds of the P. butyracea plant. The butter has potential use in the food, pharmaceutical, and cosmetic industries. The study investigated traditional PBSB processing methods in Ghana and evaluated their effects on yield, physicochemical parameters, and fatty acid composition. Four traditional extraction methods were identified and evaluated, and these methods are direct wet extraction of PBSB from a fresh mixture of the seed paste and water (DEW); wet extraction of PBSB from a 12-hour fermented mixture of the seed paste and water (FWO); direct wet extraction of PBSB from a fresh mixture of the seed paste, salt, and water (DES); and wet extraction of PBSB from a 12-hour fermented mixture of the seed paste, salt, and water (FSO). Results of physicochemical properties of the PBSB samples showed moisture content of 0.06-0.07%, free fatty acid of 1.38-2.43%, iodine value of 56.50-56.85 Wijs, peroxide value of 5.58-8.52 mEq/kg, relative density of 0.91, refractive index of 1.462-1.464, percent impurities of 0.015-0.017%, saponification value of 165.57-178.02 mg KOH/g, and percent unsaponifiable matter of 2.60-3.18%. The PBSB yield varied in the range of 21.68-26.97%, with the highest average butter yield observed for FWO. Seventeen fatty acids were characterized in the PBSB samples, and they included ten saturated fatty acids, five monounsaturated fatty acids, and two polyunsaturated fatty acids. Key fatty acids found in the PBSB samples were oleic acid (51.21-51.31%), stearic acid (43.22-43.33%), palmitic acid (2.91-3.07%), linoleic acid (0.49-0.51%), linolenic acid (0.12-0.20%), and arachidic acid (0.14-0.15%). PBSB samples produced by the various traditional extraction methods in Ghana recorded similar physicochemical characteristics as unrefined shea butter per the Regional Standard for Unrefined Shea Butter (CXS 325R-2017) as well as Cook Brand Margarine, a common commercial baking fat, and thus, their potential food application such as an alternative shortening/ingredient could be explored in a future study.

Identification and Analysis of Expression Patterns of the Caleosin Genes in Hickory (Carya cathayensis Sarg.)

The deciduous tree hickory (Carya cathayensis) holds economic significance in China due to its high oil content, particularly in unsaturated fatty acids. Oil bodies are crucial for storing triacylglycerol (TAG), with caleosin serving as a predominant oil body protein that aids in oil body formation and stability maintenance. Our study utilized bioinformatics techniques to identify caleosin genes within Carya cathayensis, Carya illinoinensis, and Juglans regia. Three caleosin genes were discovered in the genomes of Carya cathayensis, Carya illi-noinensis, and Juglans regia. These genes encode hydrophilic proteins. Additionally, all caleosin proteins feature a single Ca2+-binding EF-hand, a conserved “proline knot” motif, and a C-terminal hydrophilic region with four potential phosphorylation sites. The caleosin proteins in Carya cathayensis consist of α-helix, β-corner, extended chain, and random curl structures. Cis-acting elements related to stress response and hormone signaling were identified in Carya cathayensis, Carya illinoinensis, and Juglans regia, with distinct cis-acting elements implicated in seed-specific regulation in Carya cathayensis. Additionally, subcellular localization analysis confirmed that CcaCLO1 and CcaCLO2 were localized within oil bodies. Transcriptome analysis and quantitative real-time polymerase chain reaction (qRT-PCR) data demonstrated a significant up-regulation of CcaCLO1 expression during the developmental stages of the Carya cathayensis embryo. Furthermore, qPCR findings indicated that caleosins from Carya cathayensis were responsive to salt stress, with a significant up-regulation of CcaCLO1 following exposure to salt stress treatment. Consequently, caleosin genes in Carya cathayensis, Carya illinoinensis, and Juglans regia share similar physicochemical characteristics and conserved motifs. Specifically, CcaCLO1 in Carya cathayensis primarily responds to embryo development and salt stress. These findings offer foundational insights for future investigations into the regulatory mechanisms of oil accumulation and response to salt stress in hickory.

Systematic enhancement of protein crystallization efficiency by bulk lysine-to-arginine (KR) substitution.

Structural genomics consortia established that protein crystallization is the primary obstacle to structure determination using x-ray crystallography. We previously demonstrated that crystallization propensity is systematically related to primary sequence, and we subsequently performed computational analyses showing that arginine is the most overrepresented amino acid in crystal-packing interfaces in the Protein Data Bank. Given the similar physicochemical characteristics of arginine and lysine, we hypothesized that multiple lysine-to-arginine (KR) substitutions should improve crystallization. To test this hypothesis, we developed software that ranks lysine sites in a target protein based on the redundancy-corrected KR substitution frequency in homologs. This software can be run interactively on the worldwide web at https://www.pxengineering.org/. We demonstrate that three unrelated single-domain proteins can tolerate 5-11 KR substitutions with at most minor destabilization, and, for two of these three proteins, the construct with the largest number of KR substitutions exhibits significantly enhanced crystallization propensity. This approach rapidly produced a 1.9 Å crystal structure of a human protein domain refractory to crystallization with its native sequence. Structures from Bulk KR-substituted domains show the engineered arginine residues frequently make hydrogen-bonds across crystal-packing interfaces. We thus demonstrate that Bulk KR substitution represents a rational and efficient method for probabilistic engineering of protein surface properties to improve crystallization.

Three-dimensional simulation of the influence of different flotation media in the dissolved air flotation tank through the population balance model.

Gas-liquid flow in the dissolved air flotation (DAF) tank was studied through computational fluid dynamics through the realizable k-ε model and the population balance model (PBM) to predict the gas content of different flotation mediums (air, carbon dioxide, and chlorine) at different heights of the separation zone in the DAF tank. Simultaneously, a particular focus was placed on studying the effects of bubble aggregation and breakage on gas content. The results indicated that there were virtually no bubbles present in the region below 0.1 m of the separation zone. The gas content in the separation zone could meet the needs for gas content in the DAF tank when all these three gases were adopted as flotation medium. The introduction of models for bubble aggregation and breakage resulted in lower gas content at the bottom of the separation zone and higher gas content at the top, aligning more closely with experimental data. Due to the structural similarity and similar physicochemical characteristics of carbon dioxide and water molecules, the impact of bubble aggregation and breakage on the gas content is minimal.

Influence of the isolation method on characteristics and functional activity of mesenchymal stromal cell-derived extracellular vesicles

Background aimsExtracellular vesicle (EV) isolation methods are based on different physicochemical properties and may result in the purification of distinct EV populations. We compared two different isolation methods suitable for producing clinical-grade mesenchymal stromal cell-derived EVs (MSC-EVs)—ion exchange chromatography (IEX) and ultrafiltration (UF)—and evaluated their impact on the composition and functional properties of EVs. MethodsEVs were purified from conditioned culture medium using an anion exchange resin (IEX) or Amicon filters with a 100-kDa cutoff (UF) (MilliporeSigma, Burlington, MA, USA). We assessed nanoparticle size and distribution by nanoparticle tracking analysis (NTA) and tunable resistive pulse sensing (TRPS) and morphology by transmission electron microscopy. We also measured protein, lipid and total RNA concentration and immunophenotyped both EV populations by flow cytometry (MACSPlex assay; Miltenyi Biotec, Bergisch Gladbach, Germany). Moreover, immunomodulatory activity was tested using a standardized macrophage polarization assay and T-cell stimulation assay. Finally, proteomic analysis and cytokine quantification were carried out to better characterize both EV populations. ResultsWe found by both TRPS and NTA that IEX and UF yielded a comparable amount of total particles with similar size and distribution. In addition, a similar quantity of lipids was obtained with the two procedures. However, IEX yielded 10-fold higher RNA quantity and a larger amount of proteins than UF. MSC-EVs isolated from IEX and UF were positive for the exosome markers CD9, CD63 and CD81 and showed a comparable surface marker expression pattern. Both populations demonstrated immunomodulatory activity in vitro, as they prevented acquisition of the M1 phenotype in lipopolysaccharide-stimulated macrophages and inhibited acquisition of the activation markers CD69 and CD25 on T cells, but the IEX-EVs exerted a significantly greater immunomodulatory effect on both macrophages and T cells compared with UF-EVs. Proteomic analysis and gene ontology enrichment analysis revealed no major differences between the preparations. Finally, cytokine quantification revealed that IEX-EVs were more enriched in some crucial anti-inflammatory and immunomodulatory cytokines (e.g., IL-2, IL-10, transforming growth factor beta and vascular endothelial growth factor) compared with UF-EVs. ConclusionsMSC-EVs isolated by IEX and UF displayed similar physicochemical, phenotypic and functional characteristics. In our conditions, both EV populations demonstrated important anti-inflammatory activity in macrophages and T cells. However, IEX-EVs were more potent than UF-EVs, which may indicate the superiority of this method for the production of clinical-grade EVs.

Preparation of astaxanthin/zeaxanthin-loaded nanostructured lipid carriers for enhanced bioavailability: Characterization-, stability-and permeability study.

Astaxanthin (ASTA) and zeaxanthin (ZEA) are xanthophyll carotenoids showing a wide spectrum of health-promoting properties. However, their utilization is limited, mostly due to poor water solubility, limited bioavailability, and a tendency to oxidate, as well as photo- and thermal instability. The aim of this work was to develop ASTA- and ZEA-loaded nano-structured lipid carriers (NLCs) that would protect them against degradation and improve their intestinal stability/permeability. Obtained NLCs were characterized by an effective diameter of 294 nm for ASTA-NLC and 280 nm for ZEA-NLC; polydispersity index (PDI) lower than 0.2; and zeta potential of -29.4 mV and -29.0 mV, respectively. Interestingly, despite similar physicochemical characteristics, our investigation revealed differences in the encapsulation efficiency of ASTA-NLC and ZEA-NLC (58.0 % vs. 75.5 %, respectively). Obtained NLCs were stable during a 21 day-storage period in the dark at room temperature or at 4 °C. Investigation of gastrointestinal stability showed no change in effective diameter and PDI under gastric conditions while both parameters significantly changed under intestinal conditions. Our results showed for the first time that both ASTA- and ZEA-NLCs intestinal absorption investigated in the in vitro model is significantly increased (in relation to pure compounds) and is affected by the presence of mucus. This study provides useful data about the advantages of using NLC as a delivery system for ASTA and ZEA that might facilitate their applications in the food and pharmaceutical industry.

Development and Validation of Discriminatory In-vitro Release Method for Intramammary Drug Product.

Intramammary (IMM) formulations are locally acting and delivered intracisternally into the udder. No pharmacopeial in-vitro release method is available to differentiate between the IMM formulations. Our research aim is to develop in-vitro release methods that discriminate different IMM formulations (SPECTRAMAST® LC and in-house formulations). Different in-house formulations were developed to simulate SPECTRAMAST® LC generics. SPECTRAMAST® LC and the in-house formulations were characterized for physicochemical attributes, such as particle size, rheology, drug content, sedimentation rate, and flocculation rate. The in-vitro release method was optimized by evaluating drug release using USP apparatuses 1, 2 (with and without enhancer/customized cells), and 4. Various test parameters, including medium effect (whole homogenized bovine milk versus aqueous buffer), medium volume (200-900mL), and rotational speed (50-200rpm) were investigated. Two potential in-vitro systems can be used as discriminatory methods for IMM formulations: USP apparatus 2 with the IMM formulation loaded into two containers a) customized formulation container (83.1cm in height and 56.4cm in width) or b) enhancer cells with their top adapted with mesh #40 (rotation speed:125rpm and 900mL of whole homogenized bovine milk). The release profile of SPECTRAMAST® LC at 1h (99.8%) was not significantly different from formulations with similar physicochemical characteristics F-01 (99.1%) and F-02 (100.5%). Formulation with different physicochemical characteristics F-03 (44.3%) and F-04 (57.2%) showed slower release (1h) than SPECTRAMAST® LC (98.8%). The developed in-vitro release methods can be used as a potential tool for in-vitro comparability evaluations for IMM formulations.

Adsorption study of 3- tetradecylamine propyl amidoxime onto rhodochrosite surface: Implications for rhodochrosite-calcite flotation separation

Rhodochrosite and calcite have similar physicochemical characteristics and floatability, making it difficult for conventional flotation collectors to effectively separate the two minerals. In this paper, a novel 3-tetradecylamine propyl amidoxime (TPA) collector with selective and excellent collection capability for rhodochrosite has been investigated. The micro-flotation experiments showed that the flotation performance of TPA is superior to that of the commonly used sodium oleate (NaOL) collector, and the separation of rhodochrosite and calcite can be achieved under neutral conditions. At a slurry pH of 7 and a dosage of 2.0 × 10−4 mol/L, TPA provided a recovery of 88.5% for rhodochrosite and only 15.0% for calcite. The mechanism of interaction between TPA and minerals was examined by contact angle, Zeta potential tests and Fourier transform infrared (FTIR) analysis, which indicated that TPA selectively adsorbed on the surface of rhodochrosite rather than calcite. Finally, the adsorption behavior of TPA molecules on the surface of rhodochrosite was confirmed by Density functional theory (DFT) calculation to be through electrostatic interaction. This paper provides a novel collector for the flotation separation of rhodochrosite from calcite with excellent collecting ability and selectivity, which is significant for the efficient utilization of manganese ore resources.

Classification of bottled waters marketed and consumed in Algeria through statistical approaches.

The main objective of this work consists of classifying 30 brands of water bottled and marketed in Algeria, based on their physicochemical compositions and their comparison with some foreign brands recognized in their countries or on a world scale. Relevant to this, descriptive statistics, as well as hierarchical ascendant classification (HAC) and principal component analysis (PCA), were used to analyse the data. The results of this study highlighted a similarity between some Algerian brands and other foreign brands of water in terms of mineral content. Moreover, the results obtained by using PCA and HAC allowed us to divide the sample of Algerian mineral waters into three distinct groups, each with similar physicochemical characteristics. The first group (Soummam, Manbaa Al Ghezlane, Mouzaia, Amane, Djmila, and Hayet) is characterized by very high levels of mineral salts compared to the other brands. The second group (Guedila, Tazliza, Arwa, Baniane, Saida, Ifri, Messerghine, Sfid, Mansourah, Batna, Mileza, S. Rached, Dhaya, Qniaa, and Lejdar) is distinguished from the first group by its average mineralization. Finally, the third group (Fezguia, Nestlé, Ovitale, L. Khedidja, A. Bouglez, Ayris, Righia, Togi, and Toudja) presents a very low mineralization.

IN VITRO MUCOLYTIC ACTIVITY DETERMINATION OF N-ACETYL CYSTEINE EFFERVESCENT TABLET USING SUSPENDED LEVEL VISCOMETER

Objective: The objective of the present study was to determine the in vitro mucolytic activity of N-Acetyl Cysteine (NAC) effervescent tablet using egg white solution and suspended level viscometer. Methods: Egg white has similar physicochemical characteristics with airway mucus, thus in vitro mucolytic activity of NAC effervescent tablets was assessed using an egg white solution and a suspended level viscometer. This was also compared with API and marketed effervescent tablets. Outcomes were statistically analysed using a single-factor ANOVA and a paired t-test. Results: The results show, in all three cases, i.e., API, Test tablet, and Commercial tablet, viscosity reduced linearly as the concentration was raised from 10 to 60 mg/10 ml having R2 values 0.9973, 0.9909, 0.9953 respectively. When compared to the negative control solution, viscosity rapidly decreased, which amounted to 71.10 %, 73.03 % and 84.63 % of API, Test tablet and Commercial tablet, respectively. The p values of single factor ANOVA and paired t-test were found to be very less than 0.05 in all cases. Conclusion: NAC effervescent tablet's in vitro mucolytic activity was successfully assessed; results suggested that linearly decreases in viscosity as the concentration of NAC increases and statistical analysis shows significant differences in values.

Human Parathyroid Hormone Analog (3–34/29–34) promotes wound re-epithelialization through inducing keratinocyte migration and epithelial–mesenchymal transition via PTHR1-PI3K/AKT activation

BackgroundRe-epithelialization is important in the process of wound healing. Various methods have been identified to expedite the process, but their clinical application remains limited. While parathyroid hormone (PTH) has shown promising results in wound healing due to its role in promoting collagen deposition and cell migration, application is limited by its potentially inhibitive effects when being continuously and locally administrated. Herein, we developed a novel PTH analog, Human parathyroid hormone (hPTH) (3–34/29–34) (henceforth MY-1), by partially replacing and repeating the amino acid sequences of hPTH (1–34), and evaluated its effect on skin wound re-epithelialization.MethodsCCK-8, colony formation unit assay, and Ki67 immunofluorescent staining were performed to evaluate the effect of MY-1 on HaCaT cell proliferation. Then, wound scratch assay, Transwell assay and lamellipodia staining were carried out to evaluate the effect of MY-1 on cell migration. Moreover, the epithelial–mesenchymal transition (EMT) markers were measured using qPCR and western blot analysis. For in-vivo drug delivery, gelatin methacryloyl (GelMA) hydrogel was employed to load the MY-1, with the physicochemical characteristics evaluated prior to its application in wound models. Then, MY-1’s role in wound healing was determined via acute skin wound models. Finally, the mechanism that MY-1 activated was also detected on HaCaT cells and in-vivo wound models.ResultsIn-vitro, MY-1 accelerated the migration and EMT of HaCaT cells, while having little effect on cell proliferation. GelMA and MY-1-incorporated GelMA hydrogels showed similar physicochemical characteristics and were used in the in-vivo studies, where the results revealed that MY-1 led to a stronger re-epithelialization by inducing basal keratinocyte migration and EMT. Further studies on in-vivo wound models and in-vitro HaCaT cells revealed that MY-1 regulated cell migration and EMT through activating PI3K/AKT signaling. The parathyroid hormone type 1 receptor (PTHR1), the main receptor of PTH, was found to be the upstream of PI3K/AKT signaling, through interfering PTHR1 expression with a small interference RNA following detection of the PI3K/AKT activation.ConclusionCollectively, our study demonstrated that MY-1 accelerates skin wound re-epithelialization by inducing keratinocyte migration and EMT via PTHR1-PI3K/AKT axis activation.8WeJxjiMKQ-SAupiANbiq5Video

Impact of biodynamic viticulture on the occurrence of fungi and mycotoxins, antioxidant activity, volatile and phenolic profile of Chardonnay grapes

This study evaluated the impact of biodynamic viticulture compared to the conventional technique regarding to the quality parameters of Chardonnay grapes. Grapes from conventional and biodynamic cultivation presented similar physicochemical characteristics (aw, pH, hardness, weight and color). The fungi occurrence was higher in conventional (52%) than biodynamic grapes (46%). A. carbonarius isolates from conventional cultivation produced higher levels of OTA, N-formyl OTα amide, OTB and OTC (38.5, 24.3, 24.1 and 24.5 μg g−1) than those from biodynamic cultivation (9.8, 10.5, 9.6 and 8.5 μg g−1), respectively. However, no mycotoxins were detected in the grapes from both viticulture practices. Sixteen volatile compounds associated to pleasant aromas were found at higher levels in the biodynamic grapes than in conventional ones, as 2-hexen-1-ol, benzaldehyde, ethyl butanoate and dihydroactinidolide, which impart a fruity odor. Higher levels of some phenolic compounds, as quercetin glucuronide (180.1 and 100.9 mg kg−1), procyanidin B1 (193 and 156.0 mg kg−1), epicatechin (160.6 and 122.0 mg kg−1), p-coumaric acid (18.6 and 17.1 mg kg−1), caftaric acid (58.6 and 32.9 mg kg−1), and catechin (9.6 and 7.0 mg kg−1), were also found in biodynamic, respectively. The antioxidant capacity of biodynamic grapes against ABTS•+, H2O2, and ROO• was 18, 5 and 48% higher than that of conventional grapes, respectively. Therefore, the biodynamic practice provides grapes with similar or even superior quality to those of conventional cultivation, in addition to being a safe and sustainable option.

Development and quality assessment of smoked rainbow trout with reduced sodium content

SummaryFish consumption is an important part of a healthy and sustainable diet. However, smoked fish can provide significant amounts of salt (NaCl), which is inadequate considering that the reduction of its intake is a priority for public health authorities worldwide. The aim of this study was to develop smoked rainbow trout with reduced NaCl content without compromising its quality and safety. In Experiment I, optimal salting parameters (2% NaCl and 4 h) were selected. In Experiment II, different combinations of NaCl, KCl (with and without bitterness masking agent), or microencapsulated spices and aromatic plants were evaluated. In general, products prepared with different formulations showed similar microbiological and physicochemical characteristics. Nevertheless, the most desirable ratio of sodium/potassium and sensory scores was attributed to the formulations prepared with 50% NaCl + 50% KCl (with and without bitterness masking agent).

Recent Advances in Noble Metal Nanoparticles for Cancer Nanotheranostics

The limitations of current treatment strategies for cancer management have prompted a significant shift in the research and development of new effective strategies exhibiting higher efficacy and acceptable side effects. In this direction, nanotheranostics has gained significant interest in recent years, combining the diagnostic and therapeutic capabilities of nanostructures for efficient disease diagnosis, treatment, and management. Such nano-assisted platforms permit the site-specific release of bioactive cargo in a controlled fashion while permitting non-invasive real-time in situ monitoring. A plethora of materials has been developed as pharmacologically relevant nanoformulations for theranostic applications ranging from metallic to lipid and polymer-based composite systems, with each offering potential opportunities and its own limitations. To improve advancements with better clarity, the main focus of this review is to highlight the recent developments focusing on using different noble metal nanoparticles (noble MNPs) as cancer nanotheranostic agents, highlighting their properties, advantages, and potential modifications for their successful utilization in personalized medicine. The advantage of using noble metals (not all, but those with an atomic number ≥76) over metal NPs is their tendency to provide additional properties, such as X-ray attenuation and near-infrared activity. The combination of these properties translates to noble MNPs for therapeutic and diagnostic applications, independent of the need for additional active molecules. Through this review, we highlighted the potential application of all noble MNPs and the limited use of osmium, iridium, palladium, rhodium, and ruthenium metal NSs, even though they express similar physicochemical characteristics. The literature search was limited by PubMed, full-text availability, and studies including both in vitro and in vivo models.

Comparative Study of Microbial Diversity in Different Coastal Aquifers: Determining Factors

Coastal aquifers have been extensively studied from the hydrodynamic and geochemical points of view, but there is still a significant gap in the knowledge of their microbial diversity. The bacterial communities of four coastal aquifers at different depths and salinities were studied in order to infer the anthropogenic and physico-chemical influences on groundwater microbiota. At the physico-chemical level, samples from different aquifers, but with similar salinities, are more similar than those taken within the same aquifer. The microbial community at the phylum level shows the dominance of Proteobacteria, Firmicutes, and Actinobacteria. Samples from the same aquifer, although having very different salinities, are more similar than samples with similar physico-chemical characteristics. Therefore, the taxa present in these media are resilient to environmental variations. The aquifer preserving the most pristine conditions harbors the lowest values of biodiversity, compared to those affected by anthropic activities. The incorporation of pollutants into the aquifer favors the development of a so-called “rare biosphere”, consisting of a high number of taxa which represent a low percentage (<1%) of the total microbial community. The analysis of microbial biodiversity in a coastal aquifer could be used as an indicator of the degree of anthropic alteration.