Silver Oxide Research Articles

Advanced Nanomaterials for Cancer Therapy: Gold, Silver, and Iron Oxide Nanoparticles in Oncological Applications.

Cancer remains one of the most challenging health issues globally, demanding innovative therapeutic approaches for effective treatment. Nanoparticles, particularly those composed of gold, silver, and iron oxide, have emerged as promising candidates for changing cancer therapy. This comprehensive review demonstrates the landscape of nanoparticle-based oncological interventions, focusing on the remarkable advancements and therapeutic potentials of gold, silver, and iron oxide nanoparticles. Gold nanoparticles have garnered significant attention for their exceptional biocompatibility, tunable surface chemistry, and distinctive optical properties, rendering them ideal candidates for various cancer diagnostic and therapeutic strategies. Silver nanoparticles, renowned for their antimicrobial properties, exhibit remarkable potential in cancer therapy through multiple mechanisms, including apoptosis induction, angiogenesis inhibition, and drug delivery enhancement. With their magnetic properties and biocompatibility, iron oxide nanoparticles offer unique cancer diagnosis and targeted therapy opportunities. This review critically examines the recent advancements in the synthesis, functionalization, and biomedical applications of these nanoparticles in cancer therapy. Moreover, the challenges are discussed, including toxicity concerns, immunogenicity, and translational barriers, and ongoing efforts to overcome these hurdles are highlighted. Finally, insights into the future directions of nanoparticle-based cancer therapy and regulatory considerations, are provided aiming to accelerate the translation of these promising technologies from bench to bedside.

Studying the properties of green synthesized silver oxide nanoparticles in the application of organic dye degradation under visible light.

In present study the green synthesis of silver oxide nanoparticles has been effectively achieved using novel plant extract Phragmanthera Macrosolen. This method provides sustainable alternative for nanoparticle synthesis, demonstrating the potential of Phragmanthera Macrosolen as a reducing and stabilizing agent in the production of Ag2O NPs. The synthesized nanoparticles were characterized for their structural, morphological, and optical properties, confirming their successful formation and potential applications in various fields. The effects of different pH values and annealing temperature of the samples on the properties of Ag2O NPs formations, as well as photo-catalytic activities towards Toluidine Blue dye degradations, were studied. Powder XRD reveals that the crystallite natures of Ag2O NPs a long with crystalline size ranges from 25.85 to 35.90nm. FIB-SEM and HR-TEM images displayed that the Ag2O NPs as spherical shapes. UV-vis spectroscopy displayed that Ag2O NPs belong to a direct-band gap of 2.1-2.6eV. FTIR- study shown that the green synthesized Ag2O NPs may be steadied via the interfaces of -OH as well as C = O groups in the carbohydrate, flavonoid, tannin, as well as phenolic acid existing in P. macrosolen L. leaf. The chemical states, electron-hole recombinations and purity of Ag and O in the synthesized Ag2O NPs were confirmed through X-ray Photoelectron Spectroscopy (XPS) and PL analysis respectively. Fascinatingly, the synthesized Ag2O NPs at pH 12 displayed high photo-catalytic degradations for TB dyes. The photo-catalytic degradations of the TB dyes were monitored spectro-photo-metrically in wave-length ranges of 200-900nm, as well as high efficiency (98.50%) with half-life of 9.5798min and kinetic rate constant of 0.07234min-1, was obtained after 45min of reactions. From this study, it can be concluded that Ag2O NPs synthesized from Phragmanthera Macrosolen aqueous extract are promising in the remediation of environmental pollution and water treatment. In this light, the study reports that Phragmanthera Macrosolen green synthesis of Ag2O NPs can effectively address environmental pollution in cost-effective, eco-friendly, and sustainable ways.

Heat transport analysis of three-dimensional Magnetohydrodynamics nanofluid flow through an extending sheet with thermal radiation and heat source/sink

Regarding heat transformation efficiency, the hybrid nanofluid performs superior to the nanofluid. The majority of hybrid nanofluid uses are in the industrial sector, producing solar energy, cooling generators, and vehicle heat transformation. Heat transfer and nanofluid velocity are the two most crucial transport properties that must be evaluated before the first and second thermodynamics equations are applied to nanoscale fluids. The objective of this work is to investigate the characteristics of transmission of heat of magnetohydrodynamic (MHD) nanofluid (Ag/H2O)and hybrid nanofluid (Ag+Al2O3/H2O)flow on a linear extensible sheet when magnetic forces are present. Similarity variables are applied to transform a set of nonlinear dimensionless partial-differential equations to collection of ordinary-differential equations. The non-analytical solutions of these transformed equations are found utilizing the MATLAB mathematical program's bvp4c function. The impression of various physical attributes along skin friction coefficients and properties of heat transmission are analyzed. The behavior of key parameters, including surface stretching ratio, rotational and magnetic effects, for temperature and velocity, is shown using graphs and tables. In conclusion, hybrid nanofluids, which comprise silver and aluminum oxide nanoparticles dispersed in water, outperform silver-water nanofluids by around 10-15% under magnetohydrodynamic (MHD). The higher thermal conductivity of these hybrid nanofluids allows for better heat dissipation, making them an appealing option for applications that need optimal thermal management in the presence of magnetic fields.

Influence of Elevated Temperature and Oxygen on the Capture of Radioactive Iodine by Silver Functionalized Silica Aerogel

Reprocessing is considered a competent strategy for spent nuclear fuel management, yet radioiodine (129I) is emitted in reprocessing off-gas as a hazardous byproduct. Silver functionalized silica aerogel (Ag0-aerogel), a promising iodine capture material, experiences a reduction in its capacity after prolonged exposure to off-gas components at elevated temperatures, a phenomenon termed as aging. To fully understand this process, we isolated the contribution of each aging factor, exposing Ag0-aerogel samples to N2 and dry air gas streams, respectively, at 150°C for different time periods. Aged samples were loaded with I2 to examine the capacity change and comprehensively characterized to investigate the evolution of their properties. Results show that temperature alone did not alter Ag0-aerogel’s capacity but triggered Ag0 nanoparticles sintering and generated organic sulfur species. The presence of O2 reduced the capacity by ∼20%, causing (i) formation of silver sulfide (Ag2S) crystals and (ii) oxidation of Ag-thiolate (Ag-S-r) to Ag sulfonate (Ag-SO3-r). Given that Ag2S readily adsorbs I2, the formation of Ag-SO3-r is the major inhibitor for iodine adsorption. This hypothesis was supported by density functional theory (DFT) simulations. These findings unraveled key mechanisms of Ag0-aerogel aging, which are useful in the development of materials that withstand realistic spent-nuclear-fuel-reprocessing off-gas conditions.

Green synthesis of AgO nanoparticles using Prosopis Cineraria bark extract and its antibacterial activity

Abstract The green synthesis of AgO nanoparticles (NP) uses plant elements like terpenoids, polyphenols, carbohydrates, enzymes, flavonoids, lipids, and alkaloids as reducing agents. A biodegradable technique produces silver oxide nanoparticles from Prosopis cineraria bark extract. This paper defines a biologically friendly, simple, cost-free, and predictable production of AgO nanoparticles (NP) from Prosopis cineraria aqueous bark extract, as well as their antibacterial efficacy. Silver oxide nanoparticles (NP) were green-produced with a bark extract of Prosopis cineraria, acting as a cap and reducing agent. The XRD study revealed that the AgO NP was in a face-centered crystal structure with a mean crystal size of 69.95 nm. The colour variations were used to detect the silver oxide nanoparticle forms in the extracts, and the successful manufacture of the AgO NP was validated using ultraviolet-visible spectrophotometry, which captured the SPR peak at approximately 601 nm. AgO NP was studied using an SEM to analyse the nanoparticles’ square shape and size. The antibacterial activities of the green synthesis of AgO NP were verified against gram-positive microorganisms like S. aureus, E. faecalis, and S. pneumoniae, and gram-negative microorganisms like E. coli, P. mirabilis, and P. aeruginosa, and the inhibition zones were found. Finally, the AgO NP produced by Prosopis cineraria bark extract is a valuable source of bioactive natural compounds. AgO NP demonstrated our antibacterial properties, which can be employed in future studies using a variety of biological approaches.

Optical Studies of Silver Oxide Deposited Thin Films Using the RF Sputtering Technique

Background/Objectives: Silver Oxide is an efficient material because it is used in batteries. Apart from this, it is a moderate oxidizing agent in a variety of processes including the oxidation of aldehydes to carboxylic acids. The objective of the study is to synthesize silver oxide films by RF sputtering technique so that synthesized films can be inserted in the spectrophotometer for optical study. Methods: Silver Oxide films were deposited on Fluorine-doped Tin Oxide (FTO) glass using Radio Frequency (RF) sputtering method and annealed at 200 °C, for two hours, and then it was used in DK2 Ratio recording Spectrophotometer to analyze absorption and transmission data. Findings: The thickness of the films was measured using a non-contact optical Profilometer, in the range of (42– 660) nm. The films were subsequently exposed to optical characterization, revealing exceptionally low transmittance and high absorbance. The band gap is estimated to be 2.2 eV. The X-ray diffraction (XRD) studies reveal that the material is crystalline and Miller indices have also been determined. The morphology and topography of the thin films were analyzed using Field Emission Scanning Electron Microscope (FESEM) and the chemical composition was estimated using EDS. Novelty: The present work reveals that the optical properties are highly dependent on the thickness and the material distribution. The direct band gap energy is evaluated from the absorption spectrum which comes out to be 2.2 eV. The XRD spectra synthesized Silver Oxide films are crystalline in nature. Keywords: Silver Oxide, Band gap, XRD, FESEM

Synthesis of Copper(I) Oxide Thin Film Through Potentiostatic Electrodeposition as an Antioxidant Film

Research on metal-based nanoparticles, such as silver, gold, and copper(I) oxide (Cu2O), has drawn considerable attention due to their potential applications in catalysis, antioxidants, antimicrobials, and anticancer fields. In this study, we successfully deposited Cu2O antioxidant films on indium tin oxide substrates through potentiostatic electrodeposition. The X-ray diffraction characterization revealed distinct peaks at 2θ value of 36.32°, 42.21°, and 61.30°, indicating the crystal structure of Cu2O thin film. The scanning electron microscopy image showed the three-sided pyramid morphology of Cu2O particles with average size of 316.18 nm. The energy dispersive X-ray spectrum confirmed the purity of the thin film, which is composed only of Cu and O elements without any impurities. The photoelectrochemical showed that the deposited Cu2O has a maximum photocurrent density of 8.37 mA/cm² under visible light irradiation and 1.40 mA/cm² without irradiation. In addition, this study also found that the highest inhibition values of DPPH (2,2-diphenyl-1-picrylhydrazyl) radicals were observed when ascorbic acid was added.

Optical, Structural and Biological Properties of Reduced Silver Oxide Nanoparticles from Anethum Graveolens Leaf Extract by Nonthermal Plasma

This research aims to develop a novel approach, employing cold plasma technology for preparing nanoparticles of silver oxide by Anethum graveolens (dill) leaf extract as a natural reducing agent. This investigation evaluated the properties of antibacterial and antibiofilm-prepared nanoparticles. Initially, dill leaf extract was prepared to stabilize and reduce the size of silver oxide nanoparticles. Improved synthesis and optimal conditions for nanoparticle formation were achieved through the application of cold plasma technology. The results obtained showed that the prepared silver oxide nanoparticles have strong antibacterial properties and that they have antibacterial activity against a different group of bacteria that cause diseases such as Klebsiella pneumoniae (K. pneumoniae), Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The results also showed the effectiveness of nanoparticles in preventing the formation of bacterial biofilms, as the highest rate of inhibition was for gram-positive bacteria S. aureus. This study demonstrated the effectiveness of plant extracts and cold plasma technology when combined in producing nanoparticles with improved properties, which may push toward the employment of these materials in developing innovative and sustainable solutions in various scientific and applied fields.

Impact of non-linear radiation on magneto - Casson fluid suspended hybrid nanomaterials in sodium alginate: Smarter textiles

BackgroundThe combination of sodium alginate (SA) and nanoparticles in Casson nanofluids can have several advantages in textile applications such as to enhance the dye absorption and finishing properties and uniform and controlled coatings on complex shapes of the fabric and garments with intricate designs or three-dimensional textile structures etc. These fascinating properties attracted us to work on this article, a Casson hybrid nanoflow under the influence of magnetic effects past a curved stretching surface. Key terms & problem definitionThis study examines the heat transfer characteristics of Casson nanofluid flow over a stretching sheet with nonlinear thermal radiation and convective boundary conditions. A Casson fluid is a non-Newtonian fluid that exhibits a yield stress, meaning it behaves like a solid below a certain shear stress. Nonlinear thermal radiation accounts for the effects of temperature-dependent radiative heat transfer. Convective boundary conditions simulate the heat exchange between the fluid and a surrounding environment. The nanoflow has its base fluid as Sodium Alginate (SA) and a mixture of Silver (Ag) and Titanium oxide (TiO2) is suspended in the fluid. MethodologyThe nanoflow model is cracked numerically employing Runge-Kutta Fehlberg technique along with shooting method. Results of flow affecting parameters on the flow characteristic quantities and engineering quantities are portrayed and presented through graphs and tables. Key findingsHybrid Nanoflow momentum decreases with an increase in the Casson parameter due to the yield stress which quite helps in the controlled and complex shape printing on the garments. The temperature of the nanofluid increases with an increase in nonlinear radiation parameter. In the presence of Ag and TiO2 nanoparticles, the non-linear radiation parameter becomes essential for managing their intricate impact on heat transfer within the fabric. Practical relevanceImproved heat transfer can significantly reduce drying times, leading to increased productivity. More efficient heat transfer can reduce energy consumption. Reduced viscosity can allow for better penetration of fluids into fabrics, leading to more uniform dyeing and finishing. Casson hybrid nanofluids can accelerate the dyeing process and improve colour uniformity. Casson hybrid nanofluids can be used in finishing processes to enhance wrinkle resistance and improve fabric appearance.

Optimization of Photocatalytic Degradation of Rhodamine B and Indigo Carmine Dyes Using Eco‐Friendly Kaolinite‐Silver Oxide Quantum Dots Nanocomposite Under Sunlight Irradiation

ABSTRACTIn this work, we present a simple method for the pyrofabrication of a new kaolinite‐ silver oxide quantum dots nanocomposite (Kao‐Ag2O/QDs) that is used for the degradation of rhodamine B (RhB) and indigo carmine (IC) dyes. A homogenous combination of kaolinite and silver nitrate was sintered up to 350 °C to create the extremely effective photocatalyst (Kao‐Ag2O/QDs). Various analytical techniques were employed to characterize the Kao‐Ag2O/QDs photocatalyst such as XRD, FTIR, XPS, SEM–EDX, TEM, DTA/TGA, ZP, BET, and UV–Vis DRS. The degradation of RhB and IC dyes through the photocatalyst was carried out in aqueous solutions utilizing several pH dye solutions and sustainable solar energy in atmosphere conditions. The nanocomposite that was prepared had shown an enhanced specific surface area of 53.3005 m2/g, a pore size of 8.1197 nm, and a total pore volume of 0.216 cm3/g. It also displayed an optical band gap energy of 2.9 eV. The study creates that employing the ideal dose of 2000 and 1500 mg/L of the Kao‐Ag2O/QDs photocatalyst at neutral conditions (pH = 7) resulted a maximum degradation effectiveness of RhB and IC of 91.06 and 93.46% after 90 min, respectively. RhB and IC dyes degradation followed Langmuir first‐order kinetics with a rate constant of 0.0217 and 0.0216 min−1 at pH = 7, respectively. The photocatalytic degradation activity for RhB dye is based on hydroxyl radicals (˙OH) and superoxide radicals (˙O2−), while the mechanism of IC removal is based on superoxide radicals (˙O2−), as revealed by scavenger‐based radical trapping studies. A triple reusability study found that the Kao‐Ag2O photocatalyst is highly stable with degradation efficiencies of RhB and IC dyes from the initial 91.09 to 90.04, 88.54, and 86.27% and from the initial 93.46 to 92.8, 91.4 and 89.32%, respectively. The optimal situations for the parameters were identified by the Box–Behnken design (BBD), which was well matched with photocatalytic degradation tests.

Laser printing of silver and silver oxide

We show that direct laser writing in aqueous silver nitrate with a λ = 1030 nm femtosecond laser results in the deposition of a mixture of silver oxide and silver, in contrast to the pure silver deposition previously reported with 780 nm femtosecond direct laser writing. However, adding photoinitiator prevents silver oxide formation in a concentration-dependent manner. As a result, the resistivity of the material can also be controlled by photoinitiator concentration with resistivity being reduced from approximately 9e-3 Ωm to 3e-7 Ωm. Silver oxide peaks dominate the X-ray diffraction spectra when no photoinitiator is present, while the peaks disappear with photoinitiator concentrations above 0.05 wt%. A THz polarizer and metamaterial are printed as a demonstration of silver oxide printing.

Development of advanced biopolymer thin films of Carboxymethyl cellulose, Silver, and Zinc Oxide nanoparticles for avocado fruit preservation applications

Nanomaterials in post-harvest preservation offer advantages such as non-toxicity, chemical residue-free protection, and effective inhibition of mold and bacteria. Due to their strong antimicrobial properties and their ability to form a thin nano-coating on fruit surfaces, even small amounts of nanoparticles provide extensive coverage, preventing microbial penetration. This technology significantly improves fruit quality and longevity during storage and transportation. In this work, we introduced an advanced biopolymer film of carboxymethyl cellulose (CMC) incorporating ZnO and Ag nanoparticles (NPs). Ag NPs and ZnO NPs demonstrated an outstanding antimicrobial inhibition property that can be used for fruit preservation. As a proof of concept, the biopolymer thin films enable to extend avocado ripening from up to 35 days. The sugar concentration variation, the hardness, and the weight loss of the avocado with and without the advanced biopolymer thin film integrated ZnO and Ag nanoparticles in 35 days were compared with each other to clarify the ripening reduction ability of the biopolymer thin film.

Floral fortification: Post-harvest strategies for enhancing flower longevity

Due to their perishable nature, the floriculture industry faces significant challenges in preserving the freshness and quality of cut flowers post-harvest. Traditional preservation methods are often inadequate for maintaining flowers' aesthetic and biological value during storage and transport. This review explores the innovative application of nanotechnology in extending the shelf life of cut flowers. Nanoparticles, such as silver and zinc oxide, exhibit unique properties that effectively delay senescence and reduce microbial growth. By examining recent advances and case studies, this review highlights how nanomaterials can enhance water uptake, improve resistance to ethylene, and maintain turgidity in various floral species. Integrating these nanotechnologies promises to revolutionize post-harvest handling, offering significant improvements in flower quality and economic returns for the floriculture sector.

Novel plasmon-coupled Ag/Ag2O nano-particles to downregulate β-catenin pathway in triple negative breast cancer

We prepared novel plasmon-coupled silver (Ag) and silver oxide (Ag2O) nanoparticles using green synthesis and a magnetic stirrer device from lemon juice. Firstly, we prepared six Ag samples from green tea and lemon juice, characterized by XRD, FTIR, UV, and HRTEM. We selected just two samples to apply to MDA-MB-231 cells. The samples entered the cell through endocytosis, showed moderate cytotoxicity and ROS levels, caused cell growth arrest at the G2M phase, exhibited higher inhibition of Cyclin D1, and induced early apoptosis. β-Catenin is an abundant protein in triple-negative breast cancer TNBC. Both samples showed inhibition of the β-catenin proteins pathway. Plasmon-coupled nanoparticles effectively inhibited β-catenin, physically capturing β-catenin and its pathway proteins, mimicking the action of a degradation protein complex due to their geometric properties. The prepared materials could be considered a promising treatment for TNBC that has not responded to chemotherapy and radiotherapy. As they have low toxicity to normal cells; this paves the way for new material designs without strict size limitations.

Evaluating fructose content in poultry feed: electrochemical insights

AbstractThe global demand for poultry meat has increased, but consumers have become more picky in their nutritional choices. The fat content of poultry meat has risen since genetic advancement has resulted in higher rates of body weight gain and fat deposition, which are closely linked. The increase in further processing for fast-food poultry items has resulted in larger birds with more body fat. Usually, carbohydrates are used for easy weight gain in poultry. This study focuses on the electrochemical detection of fructose as a feed additive in poultry. The catalyst used was silver–silver oxide–zinc oxide (Ag–AgO–ZnO) and it was prepared by sol–gel method. Further, the surface morphology of the catalyst was analysed using various techniques, including X-ray diffraction, Fourier-transform infrared spectroscopy and transmission electron microscopy (XRD, FTIR and TEM). Cyclic voltammetry was carried out to find out the effectiveness of this catalyst in detecting fructose and our results revealed a sensitivity of 0.3 M with an electrochemical current of 1 mA cm−2, indicating the effectiveness of the chosen electrochemical approach. And further investigation was carried out to monitor effects of various parameters including scan rate, catalyst loading and fructose concentration. This research contributes valuable insights into assessing fructose levels in poultry feed, with potential implications for optimising nutritional formulations and enhancing overall poultry health. The electrochemical method demonstrates promise as a reliable tool for sensitively analysing fructose in feed additives. Precision and accuracy assessments further underscore the reliability of our electrochemical approach in differentiating fructose content within the poultry feed matrix. Graphical Abstract

Green synthesis of silver, starch, and zinc oxide mediated nanoparticles with probiotics and plant extracts, their characterization and anti-bacterial activity

Nanotechnology has various applications in all branches of science, including engineering, medicine, pharmacy, and other related fields. Conventional techniques, such as the chemical reduction approach, which produces nanoparticles (NPs) using various hazardous chemicals, offer several health risks due to their toxicity and raise serious environmental concerns. In contrast, other techniques are expensive and need a lot of energy. More than 70 % of pathogenic bacterial strains have developed resistance to at least one class of antibiotics, leading to an increase in life-threatening bacterial infections that pose a significant health risk. However, the creation of NPs by biogenic synthesis is risk-free for the environment and clean enough for biological use. This study was aimed at synthesis of novel Moringa oleifera mediated starch capped silver-zinc NPs and green synthesis of ZnO nanoparticles from Aloe vera, papaya, and Lactobacillus plantarum. Antimicrobial activity of both NPs was tested against Gram-negative antibiotic-resistant bacteria Pseudomonas aeruginosa, Gram-positive bacteria Staphylococcus aureus (ATCC 6538), and two foodborne pathogens Listeria monocytogenes and Campylobacter jejuni. Ultraviolet–visible spectroscopy, Fourier Transform Infrared Spectroscopy, and Scanning Electron Microscopy were used for characterization. Majority of the research studies stress the flexibility, repeatability, and desirable features of the metals, polymers, and plant components employed in the production of biomedical nanoparticles. Such an intuitive approach provides several advantages, particularly a reasonable total expense, compliance with healthcare and pharmaceutical implementations, and the ability to produce massive volumes for industrial use. The novelty of the presented work lies in the unusual combination of silver, starch, and zinc oxide nanoparticles using Moringa oleifera, which is an eco-friendly alternative to chemical-based methods. This research exhibits the formation of well-defined nanoparticles with strong antibacterial activity against a wide range of pathogens, giving us insights into their potential applications in various biomedical fields.

Silver oxide integrated ionic polymer composite for wearable sensing and water purification

Integrating metal nanoparticles (NPs) with ionic polymer blends/composites showed immense interest for their potential in wearable sensors, soft robotic arms, flexible man-machine interfaces of biomedical devices, and water purification applications. However, conventional NPs attached ionic polymer composites exhibit limitations such as low sensitivity (ΔR/R), low total dissolved solids (TDS) reduction, and low phosphate (PO4-P) removal rate. Herein, ionic polymer composites (IPCs) using flower-shaped silver oxide (Ag2O) attached Poly (vinylidene fluoride) (PVDF)/ polyvinylpyrrolidone (PVP)/ionic liquid (IL) were designed and developed for wearable sensing and water purification. The IPCs demonstrated remarkably high ΔR/R values of 50, 10, and 3.5 corresponding to the wrist movement of 50°, finger movement of 180°, and chin movements respectively. The Ag2O-based IPC recorded a significant reduction of TDS from sewage water from 3405 ppm to 1035 ppm, elevated the dissolved oxygen (DO) levels in the sewage water from 1.2 mg/l to 6.8 mg/l, and removed approximately 87.38 % phosphate from sewage water. Due to the uniform distribution of Ag2O within pores of IPC, it demonstrated enhanced performance for wearable and wastewater treatment applications.

Dual-Seed Strategy for High-Performance Anode-Less All-Solid-State Batteries.

Interest in all-solid-state batteries (ASSBs), particularly the anode-less type, has grown alongside the expansion of the electric vehicle (EV) market, because they offer advantages in terms of their energy density and manufacturing cost. However, in most anode-less ASSBs, the anode is covered by a protective layer to ensure stable lithium (Li) deposition, thus requiring high temperatures to ensure adequate Li ion diffusion kinetics through the protective layer. This study proposes a dual-seed protective layer consisting of silver (Ag) and zinc oxide (ZnO) nanoparticles for sulfide-based anode-less ASSBs. This dual-seed-based protective layer not only facilitates Li diffusion via multiple lithiation pathways over a wide range of potentials, but also enhances the mechanical stability of the anode interface through the in situ formation of a Ag-Zn alloy with high ductility. The capacity retention during full-cell evaluation is 80.8% for 100 cycles when cycled at 1mA cm-2 with 3 mAh cm-2 at room temperature. The dual-seed approach provides useful insights into the design of multi-seed concepts in which, from a mechanochemical perspective, various lithiophilic materials synergistically impact upon the anode-less interface.

Use of Metallic Nanoparticles Against Eimeria-the Coccidiosis-Causing Agents: A Comprehensive Review.

Coccidiosis is a protozoan disease caused by Eimeria species and is a major threat to the poultry industry. Different anti-coccidial drugs (diclazuril, amprolium, halofuginone, ionophores, sulphaquinoxaline, clopidol, and ethopabate) and vaccines have been used for their control. Still, due to the development of resistance, their efficacy has been limited. It is continuously damaging the economy of the poultry industry because under its control, almost $14 billion is spent, globally. Recent research has been introducing better and more effective control of coccidiosis by using metallic and metallic oxide nanoparticles. Zinc, zinc oxide, copper, copper oxide, silver, iron, and iron oxide are commonly used because of their drug delivery mechanism. These nanoparticles combined with other drugs enhance the effect of these drugs and give their better results. Moreover, by using nanotechnology, the resistance issue is also solved because by using several mechanisms at a time, protozoa cannot evolve and thus resistance cannot develop. Green nanotechnology has been giving better results due to its less toxic effects. Utilization of metallic and metallic oxide nanoparticles may present a new, profitable, and economical method of controlling chicken coccidiosis, thus by changing established treatment approaches and improving the health and production of chickens. Thus, the objective of this review is to discuss about economic burden of avian coccidiosis, zinc, zinc oxide, iron, iron oxide, copper, copper oxide, silver nanoparticles use in the treatment of coccidiosis, their benefits, and toxicity.

Development of Tetracycline by AgO Nanoparticles and Studying its Activity on Antibiotic-Resistant Bacteria

General background: Antibiotic resistance in bacteria has become a critical global health issue, necessitating the development of new strategies to enhance antibiotic efficacy. Specific background: Nanoparticles, particularly silver nanoparticles (AgNPs), have emerged as potential enhancers of antibiotics due to their unique properties and interactions with bacterial cells. Knowledge gap: However, the combination of nanoparticles with existing antibiotics, such as tetracycline, and their impact on bacterial inhibition and safety has not been fully explored. Aims: This study aims to investigate the antibacterial activity of silver oxide nanoparticles (AgO NPs) combined with tetracycline (TCS) and evaluate their effectiveness against resistant bacterial strains. Results: AgO NPs were synthesized using a photodeposition method, yielding nanoparticles with an average diameter of 2.24 nm. The AgO NPs + TCS combination demonstrated superior antibacterial activity, with a minimum inhibitory concentration (MIC) of 16 μg/mL against Staphylococci and 32 μg/mL against Pseudomonas aeruginosa, significantly outperforming standard tetracycline. Hemolysis assays confirmed the safety of the synthesized compound at all concentrations. Novelty: Silver oxide nanoparticles and tetracycline exhibit a unique synergistic interaction, enhancing antimicrobial effects by increasing bacterial membrane permeability, facilitating greater antibiotic infiltration. Implications: These findings suggest that AgO NPs combined with tetracycline offer a promising solution to overcome bacterial resistance, providing a potent and safe alternative to conventional antibiotic treatments. Highlights: AgO NPs and tetracycline show enhanced antibacterial effects. More effective than standard tetracycline against resistant bacteria. Safe with no toxicity observed in hemolysis tests. Keywords: Antibiotic resistance, silver nanoparticles, tetracycline, photodeposition, antibacterial activity