Siloxane-terminated Side Chains Research Articles

Polymerized-Small-Molecule Acceptors Featuring Siloxane-Terminated Side Chains for Mechanically Robust All-Polymer Solar Cells.

Flexible and stretchable organic solar cells (OSCs) show great promise in wearable and stretchable electronic applications. However, current high-performance OSCs consisting of polymer donors (PDs) and small-molecule acceptors (SMAs) face significant challenges in achieving both high power conversion efficiency (PCE) and excellent stretch-ability. In this study, we synthesized a new polymerized-small-molecule acceptor (P-SMA) PY-SiO featuring siloxane-terminated side chains and compared its photovoltaic and mechanical performance to that of the reference PY-EH with ethylhexyl-terminated side chains. We found that the incorporation of siloxane-terminated side chains in PY-SiO enhanced the molecular aggregation and charge transport, leading to an optimized film morphology. The resultant of all-polymer solar cells (all-PSCs) based on PBDB-T/PY-SiO showed a higher PCE of 12.04% than the PY-EH-based one (10.85%). Furthermore, the siloxane-terminated side chains also increased the interchain distance and provided a larger free volume for chain rotation and reconfiguration, resulting in a higher film crack-onset strain (COS: 18.32% for PBDB-T/PY-SiO vs 11.15% for PBDB-T/PY-EH). Additionally, the PY-SiO-based stretchable all-PSCs exhibited an impressive PCE of 9.8% and retained >70% of its original PCE even under a substantial 20% strain, exceeding the performance of the PY-EH-based stretchable all-PSCs. Our result suggests the great potential of the siloxane-terminated side chain for achieving high-performance and stretchable OSCs.

Siloxane-induced robust photoactive materials with high humidity tolerance for ambient processing of organic solar cells

Photoactive materials comprising a siloxane-terminated side chain could enable active layers with high humidity tolerance and maintain high efficiency.

Influence of the cooling rate in annealing post-treatment on small molecule with siloxane side chains for solution-processed organic field-effect transistors

In this study, a donor-acceptor-type small molecule possessing a narrow bandgap with siloxane-terminated side chains, namely, S-LBG, was synthesized and characterized to be used as a semiconducting layer in organic field-effect transistors (OFETs). The diketopyrrolopyrrole (DPP)-based small molecule contains silaindacenodithiophene as an electron-donor core and 2-(1,1-dicyanomethylene)rhodanine as an electron-accepting end group. S-LBG films show highly crystalline structures after thermal annealing treatment owing to the strong intermolecular interactions between its siloxane side chains; furthermore, a smooth-surface film with a large polycrystalline grain size can be fabricated by controlling the cooling rate after annealing. Solution-processed OFETs using cooled S-LBG films at a rate of 1 °C/min and exhibits a high hole mobility of 0.102 cm2 V−1 s−1 with a π–π stacking distance of 0.659 nm.

Siloxane-functional small molecule acceptor for high-performance organic solar cells with 16.6% efficiency

As one of the simple but most effective molecular design strategies, side-chain engineering has been widely employed to modify the photoelectric properties of active layer materials for boosting the photovoltaic performance of organic solar cells (OSCs). Herein, a functionalized small molecule acceptor (SMA) named BTSi-4F with a bulky siloxane-terminated solubilizing group as side-chains, derived from a classical SMA of Y6, was designed and synthesized. The results demonstrate that the introduction of siloxane-functional terminated groups into SMA not only affects the optical absorption and molecular energy levels, but also regulates the miscibility between the polymer donor and SMA. Compared to the original Y6, BTSi-4F exhibits a better solubility, upshifted lowest unoccupied molecular orbital (LUMO) energy level, more ordered molecular packing, and higher electron-mobility. Matched with a wide bandgap polymer donor PM6, the chlorobenzene-processed OSCs based on PM6:BTSi-4F achieved a superior power conversion efficiency (PCE) of 16.6% with both high open-circuit voltage (Voc) of 0.90 V and high fill factor (FF) of 0.77, while the devices based on PM6:Y6 obtained a much lower PCE of 13.0% with a Voc of 0.81 V and FF of 0.69 under the same conditions. This work offers a promising molecular design strategy of siloxane-terminated side chain engineering to develop high-performance SMAs for efficient OSCs.

Highly stretchable All-polymer solar cells enabled by Siloxane-terminated side chains and molecular weight control

Stretchable organic solar cells (OSCs) are promising wearable power generators. Here, we synthesize a series of bithienyl-benzodithiophene-alt-fluorobenzotriazole copolymer (PBZ-2Si) with siloxane-terminated side chains, and compare with J52 analogues to investigate side chain effects on the photovoltaic and mechanical properties. When different molecular weight (Mn) of PBZ-2Si, denoted as PBZ-2SiL, PBZ-2SiM and PBZ-2SiH, blended with the N2200 acceptor, the PBZ-2SiM based all-polymer solar cell (all-PSC) shows an improved power conversion efficiency (PCE) of 7.01 % as compared to that of J52 (5.30 %). The improved PCE of PBZ-2SiM is attributed to the enhanced molecule aggregation, balanced charge transport and optimal film morphology induced by siloxane side chains. Notably, the PBZ-2SiM:N2200 blend film shows a significantly improved stretchability of 38.4 % compared to 19.5 % of J52 reference, because the plasticizing effect that extended soft siloxane side chains enlarge interchain distance of polymer backbones and increase the chain rotational free volume. Further increasing Mn enhances polymer chain entanglements and boosts the stretchability up to 50.7 %, known as the highest stretchability reported to date. Moreover, the PBZ-2SiM-based stretchable OSC showed a high PCE of 6.0 % and maintained over 80 % of its initial PCE at 50 % enormous strain, outperforming the J52 reference. Therefore, our work provides practical guidelines for developing highly efficient and stretchable all-PSC.

Highly Stretchable All-Polymer Solar Cells Enabled by Siloxane-Terminated Side Chains and Molecular Weight Control

Highly Stretchable All-Polymer Solar Cells Enabled by Siloxane-Terminated Side Chains and Molecular Weight Control

A comparison of the positional effect of difluorination and the synergistic effect of siloxane-terminated side chains on benzodithiophene-based conjugated polymers for efficient photovoltaic application

The synergistic effect of siloxane terminus and difluorination is systematically studied through six polymer donors based on benzodithiophene and benzodithiophene-4,8-dione.

Face-on oriented hydrophobic conjugated polymers as dopant-free hole-transport materials for efficient and stable perovskite solar cells with a fill factor approaching 85%

Siloxane-terminated polymers with low surface energy were studied as dopant-free HTMs in PSCs. The siloxane-terminated side-chains assisted the dissolution, tuning mobility, passivating perovskite defects and enhancing hydrophobicity of the polymer.

Reducing the side-chain influences of isoindigo-based polymer donors by backbone fluorination in photovoltaic applications

The effect of synergistic structural engineering (asymmetric side chains and backbone fluorination) for polymer donors in photovoltaic applications is investigated in this study. Six isoindigo (IID)-based polymer donors with slightly different side-chain and backbone designs are composed of a bithiophene (BT) or fluorinated bithiophene moiety to form two series of polymers [PII2T (P1–P3) and PII2TF (P4–P6)] while symmetric/asymmetric side-chain combinations are composed of decyltetradecane branched alkyl side chain (DT) and siloxane-terminated side chain (SiO–C8). The results indicate the different side chain design and backbone fluorination modulate the energy levels, crystalline properties, and molecular packing behaviors of the polymers. P2 and P5 with asymmetric side chains are showed to deliver the highest power conversion efficiency (PCE) in the respective series of PII2T and PII2TF. The morphological analyses reveals that the mismatched side-chain geometry results in a face-on dominated packing to yield superior device performance. Meanwhile, the fluorinated polymers (P4–P6) show superior performance than the corresponding non-fluorinated polymers (P1–P3). Moreover, backbone fluorination largely reduces the performance difference between the polymers with symmetric side chains and asymmetric sides chains. This work demonstrates that the synergistic effect of asymmetric side chains and backbone fluorination can be a rational design towards high-performance conjugated polymers.

Introducing Siloxane-Terminated Side Chains in Small Molecular Donors for All-Small-Molecule Organic Solar Cells: Modulated Molecular Orientation and Enhanced Efficiency.

In this work, three small molecular donors (SMDs) S35, S35-1Si, and S35-2Si, with 3,5-difluorophenyl-substituted benzodithiophene as the central 2-dimensional unit to combine different numbers of siloxane-terminated side chain, were synthesized for all-small-molecule organic solar cells (ASM-OSCs). The three SMDs showed comparable film absorption peaks at 570 nm and optical band gaps of 1.8 eV. Relative to S35 and S35-1Si with symmetric alkyl side chains and asymmetric side chains on the central unit, respectively, the S35-2Si carrying two symmetric siloxane-terminated side chains displayed largely elevated melting and crystalline temperatures, lowered surface energy, and modulated molecular orientation. The three SMDs possessed edge-on dominated molecular orientations of their neat films; however, a big difference was found for their blend films with nonfullerene acceptor Y6. The S35:Y6 and S35-1Si:Y6 blends exhibited edge-on and face-on bimodal orientations but the S35-2Si:Y6 blend showed pure face-on orientation, indicating quite different donor:acceptor intermolecular interactions. Some large domains existed in the S35:Y6 and S35-1Si:Y6 blends, but could be suppressed by the S35-2Si:Y6 blend, leading to a more balanced charge transport. In ASM-OSCs, the two S35:Y6 and S35-1Si:Y6 active layers showed comparable power conversion efficiencies (PCE) of ∼12% but a much higher efficiency of 13.50% could be achieved with the S35-2Si:Y6 active layer. Our results suggest that the siloxane-terminated side chain is promising to regulate crystalline ability of a SMD, paving a way for high performance ASM-OSCs.

Replacing alkyl side chain of non-fullerene acceptor with siloxane-terminated side chain enables lower surface energy towards optimizing bulk-heterojunction morphology and high photovoltaic performance

Replacing alkyl side chain of non-fullerene acceptor with siloxane-terminated side chain enables lower surface energy towards optimizing bulk-heterojunction morphology and high photovoltaic performance

Synthesis and photovoltaic performance of a non-fullerene acceptor comprising siloxane-terminated alkoxyl side chain

As an effective molecular modification strategy, side chain engineering has been widely used in promoting the photovoltaic performance of non-fullerene acceptors. Herein, a novel non-fullerene small molecular acceptor i-IEOSi-4F comprising siloxane-terminated alkoxyl side chain was successfully designed and synthesized. The molecule shows an optical band gap of 1.53 eV, with large extinction coefficient of 2.36 × 105 M−1 cm−1 in solution. Two fluorobenzotriazole based polymers J52 and PBZ-2Si with the same backbone units but different side chains were employed as the donor to construct the active layers that all can demonstrate suitable energy levels and complementary absorptions with i-IEOSi-4F. Relative to J52 only bearing alkyl side chain, PBZ-2Si with siloxane-terminated side chain could induce more balanced carrier transports and more favorable morphology, leading to a higher power conversion efficiency (PCE) of 12.66% with a good fill factor of 71.45%. The efficiency is 21% higher than that of 10.46% for the J52 based devices. Our results not only indicate that siloxane-terminated alkoxyl side chain is valuable for efficient non-fullerene acceptors, but also demonstrate that siloxane-terminated side chain on both polymer donor and small molecular acceptor is a useful combination to realize more efficient polymer solar cells.

Highly Stretchable All-Polymer Solar Cells Enabled by Siloxane-Terminated Side Chains and Molecular Weight Control

Highly Stretchable All-Polymer Solar Cells Enabled by Siloxane-Terminated Side Chains and Molecular Weight Control

Synthetic strategy for thienothiophene-benzotriazole-based polymers with high backbone planarity and solubility for field-effect transistor applications

We report on a synthetic strategy for a series of thienothiophene-benzotriazole-based polymers—octyl-PTTBTz-F, Si-PTTBTz, and Si-PTTBTz-F—wherein conformational locks are introduced to induce intra- and intermolecular interactions (F···S, F···H–C, and C–F··· πF) for high backbone planarity and siloxane-terminated side chains are introduced to increase solubility. The three polymers were utilized as active layers in organic field-effect transistors, and the effects of thermal annealing on the polymer crystallinity and device performances were studied. Although the fluorine-atom-substituted octyl-PTTBTz-F showed a moderate hole mobility of up to 4.2×10−3cm2V−1s−1 with enhanced molecular orientation because of conformational locks, it had poor solubility in common organic solvents. The Si-PTTBTz polymer with the siloxane-terminated side chains showed good solubility but inferior device performance with a hole mobility of up to 2.2×10−4cm2V−1s−1. The rationally designed Si-PTTBTz-F polymer, which contains both fluorine atoms in the backbone and siloxane-terminated groups in the side chains, showed an excellent hole mobility of up to 0.11cm2V−1s−1 and good solubility in common organic solvents.

Introduction of Siloxane-Terminated Side Chains into Semiconducting Polymers To Tune Phase Separation with Nonfullerene Acceptor for Polymer Solar Cells.

In this work, five PTB7-Th-based conjugated polymers (PTB7-Th, PTBSi20, PTBSi25, PTBSi33, and PTBSi100) with different contents of siloxane-terminated pentyl side chain were synthesized, and properties of corresponding blend films with narrow band gap nonfullerene IEICO-4F acceptor were extensively investigated. According to the contact angle testing, the PTB7-Th with 100% alkyl side chain and PTBSi100 100% siloxane-terminated side chain on the benzodithiophene unit showed surface energy values of 40.04 and 34.52 mJ/m2, respectively. The results demonstrate that relative to alkyl side chain in PTB7-Th, the siloxane-terminated side chain could effectively reduce the surface energy of a resulting polymer. Based on Flory-Huggins interaction parameter estimations, the miscibility between the polymer and IEICO-4F would vary in an order of PTB7-Th > PTBSi20 > PTBSi25 > PTBSi33 > PTBSi100, suggesting that siloxane-terminated side chain would afford a tunable driving force for phase separation. Transmission electron microscopy and Raman mapping could confirm large bulk domains inside the PTBSi100:IEICO-4F blend film. In polymer solar cells, the blend film of the PTBSi100 with the lowest miscibility to IEICO-4F showed an undesirable power conversion efficiency (PCE) of 8.52%, which was significantly lower than that of 11.23% for PTB7-Th, suggesting that too large phase separation driving force is not beneficial for the device performance. Side-chain random copolymers PTBSi20, PTBSi25, and PTBSi33 for fine tuning could display PCEs of 11.94, 12.61, and 11.80%, respectively, all higher than that of PTB7-Th. Our results not only reveal the big surface energy difference between the siloxane-terminated side chain and the common alkyl side chain but also provide a guideline for side chain engineering of conjugated polymer donors with tunable morphology and optimal matching with a nonfullerene acceptor.

Improved photovoltaic properties of PM6-based terpolymer donors containing benzothiadiazole with a siloxane-terminated side chain

A new series of PM6-based terpolymers (PM10Si, PM20Si, and PM30Si) were designed and synthesized, and their photovoltaic properties based on the inverted deviced and the two-step sequential deposition (SD) were studied.

The Effects of Side Chains on the Charge Mobilities and Functionalities of Semiconducting Conjugated Polymers beyond Solubilities.

Recent decades have witnessed the rapid development of semiconducting polymers in terms of high charge mobilities and applications in transistors. Significant efforts have been made to develop various conjugated frameworks and linkers. However, studies are increasingly demonstrating that the side chains of semiconducting polymers can significantly affect interchain packing, thin film crystallinity, and thus semiconducting performance. Ways to modify the side alkyl chains to improve the interchain packing order and charge mobilities for conjugated polymers are first discussed. It is shown that modifying the branching chains by moving the branching points away from the backbones can boost the charge mobilities, which can also be improved through partially replacing branching chains with linear ones. Second, the effects of side chains with heteroatoms and functional groups are discussed. The siloxane-terminated side chains are utilized to enhance the semiconducting properties. The fluorinated alkyl chains are beneficial for improving both charge mobility and air stability. Incorporating H bonding group side chains can improve thin film crystallinities and boost charge mobilities. Notably, incorporating functional groups (e.g., glycol, tetrathiafulvalene, and thymine) into side chains can improve the selectivity of field-effect transistor (FET)-based sensors, while photochromic group containing side chains in conjugated polymers result in photoresponsive semiconductors and optically tunable FETs.

Asymmetric Side-Chain Engineering of Isoindigo-Based Polymers for Improved Stretchability and Applications in Field-Effect Transistors.

Thus far, there is still no study systematically investigating the influence of asymmetric side-chain design on a polymer's stretchability and its associated stretchable device applications. Herein, three kinds of asymmetric side chains consisting of carbosilane side chain (Si-C8), siloxane-terminated side chain (SiO-C8), and decyltetradecane side chain (DT) are engineered in isoindigo-bithiophene (PII2T, P1-P3) and isoindigo-difluorobithiophene (PII2TF, P4-P6) conjugated polymers, and their structure-stretchability correlation is explored in field-effect transistor characterization. It is revealed that owing to the geometric difference between the side chains, different asymmetric side-chain combinations impose distinct influences on the molecular stacking and orientation of the derived polymers. Surprisingly, the combination of asymmetric side chains and backbone fluorination is shown to deliver the best stretchability and mechanical durability of the derived polymer. Consequently, P6 consisting of asymmetric Si-C8/DT side chains and fluorinated backbone possesses the best mobility preservation of 81% at 100% strain with the stretching force perpendicular to the charge-transporting direction. Moreover, it presents 90% mobility retention after 400 stretching-releasing cycles with 60% strain, greatly exceeding the value (36%) of the non-fluorinated counterpart (P3). Our results suggest that the rational design of asymmetric side chains and backbone fluorination provides an efficient way to enhance the intrinsic stretchability of conjugated polymers.

Impact of the Siloxane-Terminated Side Chain on Photovoltaic Performances of the Dithienylbenzodithiophene-Difluorobenzotriazole-Based Wide Band Gap Polymer Donor in Non-Fullerene Polymer Solar Cells.

To thoroughly disclose the role of the siloxane-terminated side chain with different substituent positions, three difluorobenzotriazole-dithienylbenzodithiophene (FTAZ-BDTT)-based polymers PBZ-1Si, PBZ-2Si, and PBZ-3Si with the siloxane-terminated side chain on the FTAZ unit (PBZ-1Si), on the BDTT unit (PBZ-2Si), and both on BDTT and FTAZ units (PBZ-3Si), respectively, were synthesized. The different side chain substitutions have slight influences on absorption behavior, thermal stability, and frontier molecular orbitals but have shown a great effect on the aggregation of the polymers. Grazing-incidence wide-angle X-ray scattering measurements reveal that, relative to PBZ-1Si with branched alkyl on the BDTT unit, polymers PBZ-2Si and PBZ-3Si, bearing the siloxane-terminated side chains on the BDTT unit, exhibit smaller π-π stacking distances and larger crystal coherence lengths, suggesting that adopting the siloxane-terminated side chain on the BDTT unit can promote the interchain π-π interaction and the ordering of molecular packing. With IT-M as the non-fullerene acceptor, among the three polymers, the PBZ-2Si-based active layer possesses the highest ordered crystals for both polymers and IT-M as well as the purest domain, which affords efficient exciton dissociation, the most balanced hole-electron transport, and reduced recombination, leading to the highest short-circuit current density (Jsc) and fill factor (FF) and then the highest power conversion efficiency (PCE) of 11.14%. In contrast, PBZ-1Si- and PBZ-3Si-based devices show lower PCEs of 8.98 and 9.92%, respectively. Moreover, PBZ-2Si:IT-M also exhibits good thickness tolerance, and its thick active layer of 240 nm shows the most limited decrease of efficiency after 77 days of storage, supplying good potential for mass fabrication. Our work suggests that the fine pairing of a siloxane-terminated side chain and an alkyl side chain is beneficial for the optimizing of a conjugated polymer donor toward high-performance non-fullerene polymer solar cells.

Siloxane-Terminated Side Chain Engineering of Acceptor Polymers Leading to Over 7% Power Conversion Efficiencies in All-Polymer Solar Cells.

To investigate the influence of functional pendent groups on acceptor polymers and photovoltaic properties of all-polymer solar cells (all-PSCs), two novel acceptor polymers containing siloxane-terminated side chains are synthesized and characterized. Increasing the content of siloxane-terminated side chains can reduce π-π stacking distance and improve crystalline behavior, yet lead to poorer solubility of the acceptor polymers. By modulating the proper loadings of siloxane-terminated side chains on the acceptor polymers, the PBDB-T:PNDI-Si25 all-PSC attains a maximal power conversion efficiency (PCE) of 7.4% with an outstanding fill factor of 0.68. The results provide new insights for developing high-performance all-PSCs through functional group engineering on the acceptor polymers, to achieve good solubility, polymer miscibility, and blend morphology.