Silk Hydrogels Research Articles

Injectable silk-polyethylene glycol hydrogels

Silk hydrogels for tissue repair are usually pre-formed via chemical or physical treatments from silk solutions. For many medical applications, it is desirable to utilize injectable silk hydrogels at high concentrations (>8%) to avoid surgical implantation and to achieve slow in vivo degradation of the gel. In the present study, injectable silk solutions that formed hydrogels in situ were generated by mixing silk with low-molecular-weight polyethylene glycol (PEG), especially PEG300 and 400 (molecular weight 300 and 400gmol−1). Gelation time was dependent on the concentration and molecular weight of PEG. When the concentration of PEG in the gel reached 40–45%, gelation time was less than 30min, as revealed by measurements of optical density and rheological studies, with kinetics of PEG400 faster than PEG300. Gelation was accompanied by structural changes in silk, leading to the conversion from random coil in solution to crystalline β-sheets in the gels, based on circular dichroism, attenuated total reflection Fourier transform infrared spectroscopy and X-ray diffraction. The modulus (127.5kPa) and yield strength (11.5kPa) determined were comparable to those of sonication-induced hydrogels at the same concentrations of silk. The time-dependent injectability of 15% PEG–silk hydrogel through 27G needles showed a gradual increase of compression forces from ∼10 to 50N within 60min. The growth of human mesenchymal stem cells on the PEG–silk hydrogels was hindered, likely due to the presence of PEG, which grew after a 5day delay, presumably while the PEG solubilized away from the gel. When 5% PEG–silk hydrogel was subcutaneously injected in rats, significant degradation and tissue in-growth took place after 20days, as revealed by ultrasound imaging and histological analysis. No significant inflammation around the gel was observed. The features of injectability, slow degradation and low initial cell attachment suggests that these PEG–silk hydrogels are of interest for many biomedical applications, such as anti-fouling and anti-adhesion.

Silk microfiber-reinforced silk hydrogel composites for functional cartilage tissue repair

Cartilage tissue lacks an intrinsic capacity for self-regeneration due to slow matrix turnover, a limited supply of mature chondrocytes and insufficient vasculature. Although cartilage tissue engineering has achieved some success using agarose as a scaffolding material, major challenges of agarose-based cartilage repair, including non-degradability, poor tissue–scaffold integration and limited processing capability, have prompted the search for an alternative biomaterial. In this study, silk fiber–hydrogel composites (SF–silk hydrogels) made from silk microfibers and silk hydrogels were investigated for their potential use as a support material for engineered cartilage. We demonstrated the use of 100% silk-based fiber–hydrogel composite scaffolds for the development of cartilage constructs with properties comparable to those made with agarose. Cartilage constructs with an equilibrium modulus in the native tissue range were fabricated by mimicking the collagen fiber and proteoglycan composite architecture of native cartilage using biocompatible, biodegradable silk fibroin from Bombyx mori. Excellent chondrocyte response was observed on SF–silk hydrogels, and fiber reinforcement resulted in the development of more mechanically robust constructs after 42days in culture compared to silk hydrogels alone. Thus, we demonstrate the versatility of silk fibroin as a composite scaffolding material for use in cartilage tissue repair to create functional cartilage constructs that overcome the limitations of agarose biomaterials, and provide a much-needed alternative to the agarose standard.

Impact of silk biomaterial structure on proteolysis

The goal of this study was to determine the impact of silk biomaterial structure (e.g. solution, hydrogel, film) on proteolytic susceptibility. In vitro enzymatic degradation of silk fibroin hydrogels and films was studied using a variety of proteases, including proteinase K, protease XIV, α-chymotrypsin, collagenase, matrix metalloproteinase-1 (MMP-1) and MMP-2. Hydrogels were used to assess bulk degradation while films were used to assess surface degradation. Weight loss, secondary structure determined by Fourier transform infrared spectroscopy and degradation products analyzed via sodium dodecyl sulfate–polyacrylamide gel electrophoresis were used to evaluate degradation over 5days. Silk films were significantly degraded by proteinase K, while silk hydrogels were degraded more extensively by protease XIV and proteinase K. Collagenase preferentially degraded the β-sheet content in hydrogels while protease XIV and α-chymotrypsin degraded the amorphous structures. MMP-1 and MMP-2 degraded silk fibroin in solution, resulting in a decrease in peptide fragment sizes over time. The link between primary sequence mapping with protease susceptibility provides insight into the role of secondary structure in impacting proteolytic access by comparing solution vs. solid state proteolytic susceptibility.

Curcumin-functionalized silk materials for enhancing adipogenic differentiation of bone marrow-derived human mesenchymal stem cells

Curcumin, a natural phenolic compound derived from the plant Curcuma longa, was physically entrapped and stabilized in silk hydrogel films, and its influence on human bone marrow-derived mesenchymal stem cells (hBMSC) was assessed related to adipogenic differentiation. The presence of curcumin significantly reduced the silk gelation time and changed the porous morphology of gel matrix, but did not change the formation of the silk beta-sheet structure. Based on spectrofluorimetric analysis, curcumin most likely interacted with hydrophobic residues in silk, interacting with the beta-sheet domains formed in the hydrogels. The antioxidant activity of silk film-associated curcumin remained functional over at least one month in both the dry and hydrated state. Negligible curcumin was released from silk hydrogel films over 48h incubation in aqueous solution. For hBMSC cultured on silk films containing more than 0.25mgml−1 curcumin, cell proliferation was inhibited, while adipogenesis was significantly promoted based on transcripts as well as Oil Red O staining. When hBMSC were cultured in media containing free curcumin, both proliferation and adipogenesis of hBMSC were inhibited when curcumin concentrations exceeded 5μM, which is more than 1000times higher than the level of curcumin released from the films in aqueous solution. Thus, silk film-associated curcumin exhibited different effects on hBMSC proliferation and differentiation compared with curcumin in solution.

Back Cover: Macromol. Biosci. 6/2014

Back Cover: A new method is developed by K. Numata and co-workers to prepare silk hydrogels and silk-pectin hydrogels via dialysis against methanol to obtain hydrogels with high concentrations of silk fibroin. On page 799, the relationship between the mechanical and biological properties and the structure of the silk-pectin hydrogels is subsequently evaluated. The silk-pectin hydrogel is composed of a heterogeneous network, which is different from fiber-reinforced, interpenetrated networks and doublenetwork hydrogels, as well as high-stiffness hydrogels, with regard to biocompatibility and biodegradability.

Characterization and in vivo evaluation of silk hydrogel with enhancement of dextrin, rhEGF, and alginate beads for diabetic Wistar Albino wounded rats

Silk is a natural bio material that is used as a wound-healing material for a long period. Favorable properties like natural slow biodegradation, superior mechanical properties, and biocompatibility make it an ideal material for the wound-healing process. It was observed that diabetic wounds require increased protection and treatment than the normal wounds. Therefore, current research is focused on preparation of silk-based hydrogels for diabetic wound healing with the combination of chitosan–alginate beads, dextrin, and recombinant human epidermal growth factor. The prepared hydrogel was tested and established for its morphology, water uptake ability, and porosity that are the special properties required for an ideal wound-dressing material. In extrapolating these findings, the prepared silk-based hydrogel was applied and tested for its wound-healing effect on diabetic-induced rats that is a widely used in vivo method of wound healing. Full-thickness wounds were created in the dorsal of rat’s skin. Wounded rats were treated topically with silk fibroin hydrogel immediately after the injury. The wound-healing rate was observed through tissue deposition and wound closure for over a 21-days period. The results established that integrated silk-based hydrogel promotes the healing process through controlled release of drug and recovery of the deep wounds of diabetic-induced male Wistar Albino rats was commendable. Therefore, the use of silk fibroin-based hydrogel may be extended to the clinical setting and act as an effective promoter for wound healing in human beings with diabetics.

Silk‐Pectin Hydrogel with Superior Mechanical Properties, Biodegradability, and Biocompatibility

A new method is developed to prepare silk hydrogels and silk-pectin hydrogels via dialysis against methanol to obtain hydrogels with high concentrations of silk fibroin. The relationship between the mechanical and biological properties and the structure of the silk-pectin hydrogels is subsequently evaluated. The present results suggest that pectin associates with silk molecules when the silk concentration exceeds 15 wt%, suggesting that a silk concentration of over 15 wt% is critical to construct interacting silk-pectin networks. The silk-pectin hydrogel reported here is composed of a heterogeneous network, which is different from fiber-reinforced, interpenetrated networks and double-network hydrogels, as well as high-stiffness hydrogels (elastic modulus of 4.7 ± 0.9 MPa, elastic stress limit of 3.9 ± 0.1 MPa, and elastic strain limit of 48.4 ± 0.5%) with regard to biocompatibility and biodegradability.

Tuning Chemical and Physical Cross-Links in Silk Electrogels for Morphological Analysis and Mechanical Reinforcement

Electrochemically controlled, reversible assembly of biopolymers into hydrogel structures is a promising technique for on-demand cell or drug encapsulation and release systems. An electrochemically sol-gel transition has been demonstrated in regenerated Bombyx mori silk fibroin, offering a controllable way to generate biocompatible and reversible adhesives and other biomedical materials. Despite the involvement of an electrochemically triggered electrophoretic migration of the silk molecules, the mechanism of the reversible electrogelation remains unclear. It is, however, known that the freshly prepared silk electrogels (e-gels) adopt a predominantly random coil conformation, indicating a lack of cross-linking as well as thermal, mechanical, and morphological stabilities. In the present work, the tuning of covalent and physical β-sheet cross-links in silk hydrogels was studied for programming the structural properties. Scanning electron microscopy (SEM) revealed delicate morphology, including locally aligned fibrillar structures, in silk e-gels, preserved by combining glutaraldehyde-cross-linking and ethanol dehydration. Fourier transform infrared (FTIR) spectroscopic analysis of either electrogelled, vortex-induced or spontaneously formed silk hydrogels showed that the secondary structure of silk e-gels was tunable between non-β-sheet-dominated and β-sheet-dominated states. Dynamic oscillatory rheology confirmed the mechanical reinforcement of silk e-gels provided by controlled chemical and physical cross-links. The selective incorporation of either chemical or physical or both cross-links into the electrochemically responsive, originally unstructured silk e-gel should help in the design for electrochemically responsive protein polymers.

Implantable Silk Composite Microneedles for Programmable Vaccine Release Kinetics and Enhanced Immunogenicity in Transcutaneous Immunization

Microneedle vaccines mimic several aspects of cutaneous pathogen invasion by targeting antigen to skin-resident dendritic cells and triggering local inflammatory responses in the skin, which are correlated with enhanced immune responses. Here, we tested whether control over vaccine delivery kinetics can enhance immunity through further mimicry of kinetic profiles present during natural acute infections. An approach for the fabrication of silk/poly(acrylic acid) (PAA) composite microneedles composed of a silk tip supported on a PAA base is reported. On brief application of microneedle patches to skin, the PAA bases rapidly dissolved to deliver a protein subunit vaccine bolus, while also implanting persistent silk hydrogel depots into the skin for a low-level sustained cutaneous vaccine release over 1-2 weeks. Use of this platform to deliver a model whole-protein vaccine with optimized release kinetics resulted in >10-fold increases in antigen-specific T-cell and humoral immune responses relative to traditional parenteral needle-based immunization.

Silk hydrogels from non-mulberry and mulberry silkworm cocoons processed with ionic liquids

Matrices based on silk fibroin from the non-mulberry silkworm Antheraea mylitta and the mulberry silkworm Bombyx mori have demonstrated good applicability in regenerative medicine. However, the cocoons of A. mylitta are underutilized in part due to their lack of solubility in traditional organic solvents. Therefore, the present work investigates the solubilization and processing of degummed fibers obtained from the cocoons of both silkworm species into hydrogels using ionic liquids (ILs). The developed hydrogels exhibited a rubbery consistency, viscoelastic behavior and rapid degradation in the presence of protease XIV. Scanning electron and confocal microscopy images suggest that human adipose stem cells (hASCs) are able to adhere to and migrate at different levels within the hydrogel structures. Moreover, the MTS assay demonstrated the maintenance of cell metabolic activity for up to 28days, while DNA quantification showed that hASCs were able to proliferate on the seeded hydrogels. The findings indicate that complete IL removal from the fabricated hydrogels results in a positive hASCs cellular response. Thus the present approach provides a unique opportunity to broaden the processability and application of silk fibroin obtained from A. mylitta cocoons for regenerative medicine, namely cartilage regeneration.

Silk Hydrogels as Soft Substrates for Neural Tissue Engineering

AbstractThere is great need for soft biomaterials that match the stiffness of human tissues for tissue engineering and regeneration. Hydrogels are frequently employed for extracellular matrix functionalization and to provide appropriate mechanical cues. It is challenging, however, to achieve structural integrity and retain bioactive molecules in hydrogels for complex tissue formation that may take months to develop. This work aims to investigate mechanical and biochemical characteristics of silk hydrogels for soft tissue engineering, specifically for the nervous system. The stiffness of 1 to 8% silk hydrogels, measured by atomic force microscopy, is 4 to 33 kPa. The structural integrity of silk gels is maintained throughout embryonic chick dorsal root ganglion (cDRG) explant culture over 4 days whereas fibrin and collagen gels decrease in mass over time. Neurite extension of cDRGs cultured on 2 and 4% silk hydrogels exhibit greater growth than softer or stiffer gels. Silk hydrogels release <5% of neurotrophin‐3 (NT‐3) over 2 weeks and 11‐day old gels show maintenance of growth factor bioactivity. Finally, fibronectin‐ and NT‐3‐functionalized silk gels elicit increased axonal bundling suggesting their use in bridging nerve injuries. These results support silk hydrogels as soft and sustainable biomaterials for neural tissue engineering.

Silk Hydrogels: Self‐Assembling Doxorubicin Silk Hydrogels for the Focal Treatment of Primary Breast Cancer (Adv. Funct. Mater. 1/2013)

Silk Hydrogels: Self‐Assembling Doxorubicin Silk Hydrogels for the Focal Treatment of Primary Breast Cancer (Adv. Funct. Mater. 1/2013)

丝素溶液的瞬时凝胶化

蛋白质溶液具有凝胶化趋势，其中丝素蛋白的凝胶化在常温下需要十几天的时间。本文提出了一种促使丝素蛋白瞬时凝胶化的方法，该方法能够促使丝素蛋白水凝胶瞬时形成。SEM分析显示该水凝胶内部为疏松多孔的三维交联网状无规则卷曲结构，且有很多微球状的结构交联在一起。利用X衍射、红外光谱等手段进行检测，结果显示丝素蛋白分子快速凝胶化过程中，其分子结构基本保持无规卷曲不变。该瞬时凝胶化的丝素水凝胶具有一定的力学性能和保水性能，可以用于化妆品以及组织工程材料。 Protein solution has a tendency of gelation. For silk fibroin solution, it needs more than ten days to gel at room temperature. This paper proposes an efficient method to promote instant silk fibroin gelatinization. SEM analysis showed that the instantaneous silk hydrogel had a porous three-dimensional network structure with random curves crossed inside. Besides, there are a lot of micro globular structures cross-boned together. The results from X-ray Dif- fraction (XRD) and Fourier Transform Infrared spectrum (FTIR) showed that the molecular structure of silk fibroin has little change and maintains random coils during the rapid gelation process. This kind of instantaneous hydrogel has ex- cellent mechanical properties and moisture retention performance, so it can be used for moisturizing cosmetics and tis- sue engineering material.

Antibiotic‐Releasing Silk Biomaterials for Infection Prevention and Treatment

Effective treatment of infections in avascular and necrotic tissues can be challenging due to limited penetration into the target tissue and systemic toxicities. Controlled release polymer implants have the potential to achieve the high local concentrations needed while also minimizing systemic exposure. Silk biomaterials possess unique characteristics for antibiotic delivery including biocompatibility, tunable biodegradation, stabilizing effects, water-based processing and diverse material formats. We report on functional release of antibiotics spanning a range of chemical properties from different material formats of silk (films, microspheres, hydrogels, coatings). The release of penicillin and ampicillin from bulk-loaded silk films, drug-loaded silk microspheres suspended in silk hydrogels and bulk-loaded silk hydrogels was investigated and in vivo efficacy of ampicillin-releasing silk hydrogels was demonstrated in a murine infected wound model. Silk sponges with nanofilm coatings were loaded with gentamicin and cefazolin and release was sustained for 5 and 3 days, respectively. The capability of silk antibiotic carriers to sequester, stabilize and then release bioactive antibiotics represents a major advantage over implants and pumps based on liquid drug reservoirs where instability at room or body temperature is limiting. The present studies demonstrate that silk biomaterials represent a novel, customizable antibiotic platform for focal delivery of antibiotics using a range of material formats (injectable to implantable).

Self‐Assembling Doxorubicin Silk Hydrogels for the Focal Treatment of Primary Breast Cancer

Standard care for early stage breast cancer includes tumor resection and local radiotherapy to achieve long-term remission. Systemic chemotherapy provides only low locoregional control of the disease; therefore, we describe self-assembling silk hydrogels that can retain and then deliver doxorubicin locally. Self-assembling silk hydrogels show no swelling, are readily loaded with doxorubicin under aqueous conditions and release drug over 4 weeks in amounts that can be fine-tuned by varying the silk content. Following successful in vitro studies, locally injected silk hydrogels loaded with doxorubicin show excellent antitumor response in mice, outperforming the equivalent amount of doxorubicin delivered intravenously. In addition to reducing primary tumor growth, doxorubicin-loaded silk hydrogels reduce metastatic spread and are well tolerated in vivo. Thus, silk hydrogels are well suited for the local delivery of chemotherapy and provide a promising approach to improve locoregional control of breast cancer.

Enhanced function of pancreatic islets co-encapsulated with ECM proteins and mesenchymal stromal cells in a silk hydrogel

Pancreatic islet encapsulation within biosynthetic materials has had limited clinical success due to loss of islet function and cell death. As an alternative encapsulation material, a silk-based scaffold was developed to reestablish the islet microenvironment lost during cell isolation. Islets were encapsulated with ECM proteins (laminin and collagen IV) and mesenchymal stromal cells (MSCs), known to have immunomodulatory properties or to enhance islet cell graft survival and function. After a 7 day in vitro encapsulation, islets remained viable and maintained insulin secretion in response to glucose stimulation. Islets encapsulated with collagen IV, or laminin had increased insulin secretion at day 2 and day 7, respectively. A 3.2-fold synergistic improvement in islet insulin secretion was observed when islets were co-encapsulated with MSCs and ECM proteins. Furthermore, encapsulated islets had increased gene expression of functional genes; insulin I, insulin II, glucagon, somatostatin, and PDX-1, and lower expression of the de-differentiation genes cytokeratin 19 and vimentin compared to non-encapsulated cells. This work demonstrates that encapsulation in silk with both MSCs and ECM proteins enhances islet function and with further development may have potential as a suitable platform for islet delivery in vivo.

Carbon Dioxide Induced Silk Protein Gelation for Biomedical Applications

We present a novel method to fabricate silk fibroin hydrogels using high pressure carbon dioxide (CO(2)) as a volatile acid without the need for chemical cross-linking agents or surfactants. The simple and efficient recovery of CO(2) post processing results in a remarkably clean production method offering tremendous benefit toward materials processing for biomedical applications. Further, with this novel technique we reveal that silk protein gelation can be considerably expedited under high pressure CO(2) with the formation of extensive β-sheet structures and stable hydrogels at processing times less than 2 h. We report a significant influence of the high pressure CO(2) processing environment on silk hydrogel physical properties such as porosity, sample homogeneity, swelling behavior and compressive properties. Microstructural analysis revealed improved porosity and homogeneous composition among high pressure CO(2) specimens in comparison to the less porous and heterogeneous structures of the citric acid control gels. The swelling ratios of silk hydrogels prepared under high pressure CO(2) were significantly reduced compared to the citric acid control gels, which we attribute to enhanced physical cross-linking. Mechanical properties were found to increase significantly for the silk hydrogels prepared under high pressure CO(2), with a 2- and 3-fold increase in the compressive modulus of the 2 and 4 wt % silk hydrogels over the control gels, respectively. We adopted a semiempirical theoretical model to elucidate the mechanism of silk protein gelation demonstrated here. Mechanistically, the rate of silk protein gelation is believed to be a function of the kinetics of solution acidification from absorbed CO(2) and potentially accelerated by high pressure effects. The attractive features of the method described here include the acceleration of stable silk hydrogel formation, free of residual mineral acids or chemical cross-linkers, reducing processing complexity, and avoiding adverse biological responses, while providing direct manipulation of hydrogel physical properties for tailoring toward specific biomedical applications.

Focal Infection Treatment using Laser‐Mediated Heating of Injectable Silk Hydrogels with Gold Nanoparticles

Medical treatment of subcutaneous bacterial abscesses usually involves systemic high-dose antibiotics and incision-drainage of the wound. Such an approach suffers from two main deficiencies: bacterial resistance to antibiotics and pain associated with multiple incision-drainage-wound packing procedures. Furthermore, the efficacy of high-dose systemic antibiotics is limited because of the inability to penetrate into the abscess. To address these obstacles, we present a treatment relying on laser-induced heating of gold nanoparticles embedded in an injectable silk-protein hydrogel. Although bactericidal nanoparticle systems have been previously employed based on silver and nitric oxide, they have limitations regarding customization and safety. The method we propose is safe and uses biocompatible, highly tunable materials: an injectable silk hydrogel and Au nanoparticles, which are effective absorbers at low laser powers such as those provided by hand held devices. We demonstrate that a single 10-minute laser treatment of a subcutaneous infection in mice preserves the general tissue architecture, while achieving a bactericidal effect - even resulting in complete eradication in some cases. The unique materials platform presented here can provide the basis for an alternative treatment of focal infections.

Biocompatible and Biodegradable Dual-Drug Release System Based on Silk Hydrogel Containing Silk Nanoparticles

We developed a facile and quick ethanol-based method for preparing silk nanoparticles and then fabricated a biodegradable and biocompatible dual-drug release system based on silk nanoparticles and the molecular networks of silk hydrogels. Model drugs incorporated in the silk nanoparticles and silk hydrogels showed fast and constant release, respectively, indicating successful dual-drug release from silk hydrogel containing silk nanoparticles. The release behaviors achieved by this dual-drug release system suggest to be regulated by physical properties (e.g., β-sheet contents and size of the silk nanoparticles and network size of the silk hydrogels), which is an important advantage for biomedical applications. The present silk-based system for dual-drug release also demonstrated no significant cytotoxicity against human mesenchymal stem cells (hMSCs), and thus, this silk-based dual-drug release system has potential as a versatile and useful new platform of polymeric materials for various types of dual delivery of bioactive molecules.

Sodium dodecyl sulfate-induced rapid gelation of silk fibroin

The in situ formation of injectable silk fibroin (SF) hydrogels have potential advantages over various other biomaterials due to the minimal invasiveness during application. Biomaterials need to gel rapidly under physiological conditions after injection. In the current paper, a novel way to accelerate SF gelation using an anionic surfactant, sodium dodecyl sulfate (SDS), as a gelling agent is reported. The mechanism of SDS-induced rapid gelation was determined. At low surfactant concentrations, hydrophobic interactions among the SF chains played a dominant role in the association, leading to decreased gelation time. At higher concentrations of surfactant, electrostatic repulsive forces among micellar aggregates gradually became dominant and gelation was hindered. Gel formation involves the connection of clusters formed by the accumulation of nanoparticles. This process is accompanied by the rapid formation of β-sheet structures due to hydrophobic and electrostatic interactions. It is expected that the silk hydrogel with short gelation time will be used as an injectable hydrogel in drug delivery or cartilage tissue engineering.