Silk Fibroin Sponge Research Articles

Cell Proliferation, Chondrogenic Differentiation, and Cartilaginous Tissue Formation in Recombinant Silk Fibroin with Basic Fibroblast Growth Factor Binding Peptide.

Regeneration of articular cartilage remains a challenge for patients who have undergone cartilage injury, osteochondritis dissecans and osteoarthritis. Here, we describe a new recombinant silk fibroin with basic fibroblast growth factor (bFGF) binding peptide, which has a genetically introduced sequence PLLQATLGGGS, named P7. In this study, we cultured a human mesenchymal cell line derived from bone marrow, UE6E7-16, in wild-type fibroin sponge (FS) and recombinant silk fibroin sponge with P7 peptide (P7 FS). We compared cell proliferation, chondrogenic differentiation and cartilaginous tissue formation between the two types of sponge. After stimulation with bFGF at 3 ng/mL, P7 FS showed significantly higher cell growth (1.2-fold) and higher cellular DNA content (5.6-fold) than did wild-type FS. To promote chondrogenic differentiation, cells were cultured in the presence of TGF-β at 10 ng/mL for 28 days. Immunostaining of P7 FS showed SOX9-positive cells comparable to wild-type FS. Alcian-Blue staining of P7 FS also showed cartilaginous tissue formation equivalent to wild-type FS. A significant increase in cell proliferation in P7 FS implies future clinical application of this transgenic fibroin for regeneration of articular cartilage. To produce cartilaginous tissue efficiently, transgenic fibroin sponges and culture conditions must be improved. Such changes should include the selection of growth factors involved in chondrogenic differentiation and cartilage formation.

Biodegradable quaternized silk fibroin sponge with highly uniform pore structure for traumatic hemostasis and anti-infection

Developing a biodegradable sponge with rapid shape recovery and potent antibacterial and coagulation properties for traumatic hemostasis and anti-infection remains challenging. Herein, we fabricated quaternized silk fibroin (SF) sponges by freeze-drying under a constant cooling rate and modification with quaternary ammonium groups. We found the constant cooling rate enabled the sponges with a highly uniform pore structure, which provided excellent self-elasticity and shape recovery. Decoration with quaternary ammonium groups enhanced blood cells adhesion, aggregation, and activation, as well as resistance to infections from Staphylococcus aureus and Escherichia coli. The SF sponge had superior hemostatic capacity to gauze and commercial gelatin sponge in different hemorrhage models. The SF sponge exhibited favorable biodegradability and biocompatibility. Moreover, The SF sponge also promoted host cell infiltration, capillary formation, and tissue ingrowth, suggesting its potential for guiding tissue regeneration. The developed SF sponge holds great application prospects for traumatic hemostasis, anti-infection, and guiding tissue regeneration.

Self-composite silk fibroin membranes for guided bone regeneration: 1 material 3 architectures with intrinsic integrity

Silk fibroin (SF) takes attention in tissue engineering due to unique features, e.g., excellent biocompatibility/biodegradability with superior mechanical/thermal properties despite its lightweight. Guided bone regeneration (GBR) seeks bilayered GBR membranes to govern bone regeneration, although constituent parts of such membranes may undergo delamination once different biomaterials are combined. Herein, 3-component bilayered SF membranes were prepared for the first time utilizing the same polymer in different forms by eliminating the delamination risk of layers for GBR applications. One side consisted of a non-porous SF film serving as a barrier against penetration of non-osteogenic tissue whereas the other side was porous/fibrous composed of SF sponge and SF fibers for bone regeneration. Proper integration between these layers was confirmed via scanning electron microscopy (SEM). Composites reinforced with high fiber percent (30%) had remarkably enhanced compressive strength and elastic moduli, which were further improved by increasing polymer concentration from 4% to 8%. Non-porous morphology of the barrier side was preserved during 28 days of degradation while pore sizes enlarged on the other surface, which would be beneficial for cell migration into the regenerative side. Saos-2 cells seeded on composites with high fiber percent proliferated more within 14 days; however, alkaline phosphatase (ALP) activity on low-fiber-percent counterparts was elevated more. Osteogenic marker gene expressions were significantly higher than control on day 14. All self-composites were eminent candidates to promote bone regeneration with tailor-made capacity for further improvements. Taken together, 1-material 3-architecture SF fabricated by a green and practical technique holds promise for GBR applications.

Surfactant-assisted photo-crosslinked silk fibroin sponges: A versatile platform for the design of bone scaffolds

Critical size bone defects cannot heal without aid and current clinical approaches exhibit some limitations, underling the need for novel solutions. Silk fibroin, derived from silkworms, is widely utilized in tissue engineering and regenerative medicine due to its remarkable properties, making it a promising candidate for bone tissue regeneration in vitro and in vivo. However, the clinical translation of silk-based materials requires refinements in 3D architecture, stability, and biomechanical properties.In earlier research, improved mechanical resistance and stability of chemically crosslinked methacrylate silk fibroin (Sil-Ma) sponges over physically crosslinked counterparts were highlighted. Furthermore, the influence of photo-initiator and surfactant concentrations on silk properties was investigated. However, the characterization of sponges with Sil-Ma solution concentrations above 10 % (w/V) was hindered by production optimization challenges, with only cell viability assessed.This study focuses on the evaluation of methacrylate sponges' suitability as temporal bone tissue regeneration scaffolds. Sil-Ma sponge fabrication at a fixed concentration of 20 % (w/V) was optimized and the impact of photo-initiator (LAP) concentrations and surfactant (Tween 80) presence/absence was studied. Their effects on pore formation, silk secondary structure, mechanical properties, and osteogenic differentiation of hBM-MSCs were investigated. We demonstrated that, by tuning silk sponges' composition, the optimal combination boosted osteogenic gene expression, offering a strategy to tailor biomechanical properties for effective bone regeneration. Utilizing Design of Experiment (DoE), correlations between sponge composition, porosity, and mechanical properties are established, guiding tailored material outcomes. Additionally, correlation matrices elucidate the microstructure's influence on gene expressions, providing insights for personalized approaches in bone tissue regeneration.

Silk fibroin sponge impregnated with fish bone collagen: A promising wound healing scaffold and skin tissue regeneration.

In the present study, porous silk fibroin sponges (SFS) were prepared using silk fibroin (SF), fish bone collagen (FBC), and olive oil (OO). The study investigates the potential use of using this sponge as skin tissue regeneration. The sponge was characterized for its physicochemical, mechanical, antimicrobial, and drug release properties. An in vitro study was carried out using human keratinocyte cell line (HaCaT). Biodegradation study using enzymatic method was carried out. The results showed that the mechanical properties such as tensile strength (23.40 ± 0.05 MPa), elongation at break (14.25 ± 0.02%), and water absorption (30.23 ± 0.01%) of the SFS were excellent, indicating promising performance. The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assays proved the biocompatible nature of the SFS. The SFS exhibited outstanding antibacterial properties against E. coli (4.72 ± 0.05 mm) and S. aureus (4.98 ± 0.07 mm). The developed SFS promote a promising solution for skin tissue regeneration and wound dressing.

Nanocomposite Methacrylated Silk Fibroin-Based Scaffolds for Bone Tissue Engineering.

The treatment of bone defects is a clinical challenge. Bone tissue engineering is gaining interest as an alternative to current treatments, with the development of 3D porous structures (scaffolds) helpful in promoting bone regeneration by ensuring temporary functional support. In this work, methacrylated silk fibroin (SilMA) sponges were investigated as scaffolds for bone tissue engineering by exploiting the combination of physical (induced by NaCl salt during particulate leaching) and chemical crosslinking (induced by UV-light exposure) techniques. A biomimetic approach was adopted to better simulate the extracellular matrix of the bone by introducing either natural (mussel shell-derived) or synthetic-origin hydroxyapatite nanoparticles into the SilMA sponges. The obtained materials were characterized in terms of pore size, water absorption capability and mechanical properties to understand both the effect of the inclusion of the two different types of nanoparticles and the effect of the photocrosslinking. Moreover, the SilMA sponges were tested for their bioactivity and suitability for bone tissue engineering purposes by using osteosarcoma cells, studying their metabolism by an AlamarBlue assay and their morphology by scanning electron microscopy. Results indicate that photocrosslinking helps in obtaining more regular structures with bimodal pore size distributions and in enhancing the stability of the constructs in water. Moreover, the addition of naturally derived hydroxyapatite was observed to be more effective at activating osteosarcoma cell metabolism than synthetic hydroxyapatite, showing a statistically significant difference in the AlamarBlue measurement on day 7 after seeding. The methacrylated silk fibroin/hydroxyapatite nanocomposite sponges developed in this work were found to be promising tools for targeting bone regeneration with a sustainable approach.

Impact of crystalline domains on long-term stability and mechanical performance of anisotropic silk fibroin sponges.

Sponge-like materials made from regenerated silk fibroin biopolymers are a tunable and advantageous platform for in vitro engineered tissue culture and in vivo tissue regeneration. Anisotropic, three-dimensional (3D) silk fibroin sponge-like scaffolds can mimic the architecture of contractile muscle. Herein, we use silk fibroin solution isolated from the cocoons of Bombyx mori silkworms to form aligned sponges via directional ice templating in a custom mold with a slurry of dry ice and ethanol. Hydrated tensile mechanical properties of these aligned sponges were evaluated as a function of silk polymer concentration (3% or 5%), freezing time (50% or 100% ethanol), and post-lyophilization method for inducing crystallinity (autoclaving, water annealing). Hydrated static tensile tests were used to determine Young's modulus and ultimate tensile strength across sponge formulations at two strain rates to evaluate rate dependence in the calculated parameters. Results aligned with previous reports in the literature for isotropic silk fibroin sponge-like scaffolds, where the method by which beta-sheets were formed and level of beta-sheet content (crystallinity) had the greatest impact on static parameters, while polymer concentration and freezing rate did not significantly impact static mechanical properties. We estimated the crystalline organization using molecular dynamics simulations to show that larger crystalline regions may be responsible for strength at low strain amplitudes and brittleness at high strain amplitudes in the autoclaved sponges. Within the parameters evaluated, extensional Young's modulus is tunable in the range of 600-2800 kPa. Dynamic tensile testing revealed the linear viscoelastic region to be between 0% and 10% strain amplitude and 0.2-2 Hz frequencies. Long-term stability was evaluated by hysteresis and fatigue tests. Fatigue tests showed minimal change in the storage and loss modulus of 5% silk fibroin sponges for more than 6000 min of continuous mechanical stimulation in the linear regime at 10% strain amplitude and 1 Hz frequency. Furthermore, we confirmed that these mechanical properties hold when decellularized extracellular matrix is added to the sponges and when the mechanical property assessments were performed in cell culture media. We also used nano-computed tomography (nano-CT) and simulations to explore pore interconnectivity and tortuosity. Overall, these results highlight the potential of anisotropic, sponge-like silk fibroin scaffolds for long-term (>6 weeks) contractile muscle culture with an in vitro bioreactor system that provides routine mechanical stimulation.

Implantable SDF-1α-loaded silk fibroin hyaluronic acid aerogel sponges as an instructive component of the glioblastoma ecosystem: Between chemoattraction and tumor shaping into resection cavities

In view of inevitable recurrences despite resection, glioblastoma (GB) is still an unmet clinical need. Dealing with the stromal-cell derived factor 1-alpha (SDF-1α)/CXCR4 axis as a hallmark of infiltrative GB tumors and with the resection cavity situation, the present study described the effects and relevance of a new engineered micro-nanostructured SF-HA-Hep aerogel sponges, made of silk fibroin (SF), hyaluronic acid (HA) and heparin (Hep) and loaded with SDF-1α, to interfere with the GB ecosystem and residual GB cells, attracting and confining them in a controlled area before elimination. 70 µm-pore sponges were designed as an implantable scaffold to trap GB cells. They presented shape memory and fit brain cavities. Histological results after implantation in brain immunocompetent Fischer rats revealed that SF-HA-Hep sponges are well tolerated for more than 3 months while moderately and reversibly colonized by immuno-inflammatory cells. The use of human U87MG GB cells overexpressing the CXCR4 receptor (U87MG-CXCR4+) and responding to SDF-1α allowed demonstrating directional GB cell attraction and colonization of the device in vitro and in vivo in orthotopic resection cavities in Nude rats. Not modifying global survival, aerogel sponge implantation strongly shaped U87MG-CXCR4+ tumors in cavities in contrast to random infiltrative growth in controls. Overall, those results support the interest of SF-HA-Hep sponges as modifiers of the GB ecosystem dynamics acting as “cell meeting rooms” and biocompatible niches whose properties deserve to be considered toward the development of new clinical procedures. Statement of SignificanceBrain tumor glioblastoma (GB) is one of the worst unmet clinical needs. To prevent the relapse in the resection cavity situation, new implantable biopolymer aerogel sponges loaded with a chemoattractant molecule were designed and preclinically tested as a prototype targeting the interaction between the initial tumor location and its attraction by the peritumoral environment. While not modifying global survival, biocompatible SDF1-loaded hyaluronic acid and silk fibroin sponges induce directional GB cell attraction and colonization in vitro and in rats in vivo. Interestingly, they strongly shaped GB tumors in contrast to random infiltrative growth in controls. These results provide original findings on application of exogenous engineered niches that shape tumors and serve as cell meeting rooms for further clinical developments.

Promotion of Wound Healing Using Nanoporous Silk Fibroin Sponges.

Wound dressings are important for wound repair. The morphology of the biomaterials used in these dressings, and in particular, the pore structure affects tissue regeneration by facilitating attachment and proliferation of cells due to the hierarchical multiscale, water absorbance, and nutrient transport. In the present study, silk fibroin (SF) sponges with walls containing nanopores (SFNS) were prepared from SF nanoparticles generated during the autoclaving of SF solutions, followed by leaching the SF nanoparticles from the freeze-dried sponges of SF. The nano/microporous structure, biofluid absorbance, and porosity of the SF sponges with and without nanopores were characterized. In vitro cell proliferation, in vivo biocompatibility, and wound healing were evaluated with the sponges. The results demonstrated that SFNS had significantly increased porosity and water permeability, as well as cell attachment and proliferation when compared with SF sponges without the nanopores (SFS). Wound dressings were assessed in a rat skin wound model, and SFNS was superior to SFS in accelerating wound healing, supported by vascularization, deposition of collagen, and increased epidermal thickness over 21 days. Hence, such a dressing material with a hierarchical multiscale pore structure could promote cell migration, vascularization, and tissue regeneration independently without adding any growth factor, which would offer a new strategy to design and engineer better-performed wound dressing.

Vancomycin-nanofunctionalized peptide-enriched silk fibroin to prevent methicillin-resistant Staphylococcus epidermidis-induced femoral nonunions in rats.

Implant-related infections and infected fractures are significant burdens in orthopedics. Staphylococcus epidermidis is one of the main causes of bone infections related to biofilm formation upon implants. Current antibiotic prophylaxis/therapy is often inadequate to prevent biofilm formation and results in antibiotic resistance. The development of bioactive materials combining antimicrobial and osteoconductive properties offers great potential for the eradication of microorganisms and for the enhancement of bone deposition in the presence of infections. The purpose of this study is to prevent the development of methicillin-resistant S. epidermidis (MRSE)-infected nonunion in a rat model. To this end, a recently developed in our laboratories bioactive material consisting of antibiotic-loaded nanoparticles based on carboxylic acid functionalized hyperbranched aliphatic polyester (CHAP) that are integrated into peptide-enriched silk fibroin sponges with osteoconductive properties (AFN-PSF) was employed, whose biocompatibility and microbiological tests provided proof of its potential for the treatment of both orthopedic and dental infections. In particular, non-critical femoral fractures fixed with plates and screws were performed in Wistar rats, which were then randomly divided into three groups: 1) the sham control (no infection, no treatment); 2) the control group, infected with MRSE and treated with peptide-enriched silk fibroin sponges incorporating non-drug-loaded functionalized nanoparticles (PSF); 3) the treated group, infected with MRSE and treated with peptide-enriched silk fibroin sponges incorporating vancomycin-loaded functionalized nanoparticles (AFN-PSF). After 8 weeks, bone healing and osteomyelitis were clinically assessed and evaluated by micro-CT, microbiological and histological analyses. The sham group showed no signs of infection and complete bone healing. The PSF group failed to repair the infected fracture, displaying 75% of altered bone healing and severe signs of osteomyelitis. The AFN-PSF treated group reached 70% of fracture healing in the absence of signs of osteomyelitis, such as abscesses in the cortical and intraosseous compartments and bone necrosis with sequestra. AFN-PSF sponges have proven effective in preventing the development of infected nonunion in vivo. The proposed nanotechnology for local administration of antibiotics can have a significant impact on patient health in the case of orthopedic infections.

Strontium-doped mesoporous bioglass nanoparticles for enhanced wound healing with rapid vascularization.

Tissue engineered skin and its substitutes have a promising future in wound healing. However, enabling fast formation of blood vessels during the wound healing process is still a huge challenge to the currently available wound substitutes. In this work, active mesoporous bioglass nanoparticles with a high specific surface area and doped with strontium (Sr) were fabricated for rapid microvascularization and wound healing. The as-prepared bioglass nanoparticles with Sr ions significantly promoted the proliferation of fibroblasts and microvascularization of human umbilical vein endothelial cells in vitro. Silk fibroin sponges encapsulating the nanoparticles accelerated wound healing by promoting the formation of blood vessels and epithelium in vivo. This work provides a strategy for the design and development of active biomaterials for enhancing wound healing by rapid vascularization and epithelial reconstruction.

The Regulatory Effect of Braided Silk Fiber Skeletons with Differential Porosities on In Vivo Vascular Tissue Regeneration and Long-Term Patency.

The development of small-diameter vascular grafts that can meet the long-term patency required for implementation in clinical practice presents a key challenge to the research field. Although techniques such as the braiding of scaffolds can offer a tunable platform for fabricating vascular grafts, the effects of braided silk fiber skeletons on the porosity, remodeling, and patency in vivo have not been thoroughly investigated. Here, we used finite element analysis of simulated deformation and compliance to design vascular grafts comprised of braided silk fiber skeletons with three different degrees of porosity. Following the synthesis of low-, medium-, and high-porosity silk fiber skeletons, we coated them with hemocompatible sulfated silk fibroin sponges and then evaluated the mechanical and biological functions of the resultant silk tubes with different porosities. Our data showed that high-porosity grafts exhibited higher elastic moduli and compliance but lower suture retention strength, which contrasted with low-porosity grafts. Medium-porosity grafts offered a favorable balance of mechanical properties. Short-term in vivo implantation in rats indicated that porosity served as an effective means to regulate blood leakage, cell infiltration, and neointima formation. High-porosity grafts were susceptible to blood leakage, while low-porosity grafts hindered graft cellularization and tended to induce intimal hyperplasia. Medium-porosity grafts closely mimicked the biomechanical behaviors of native blood vessels and facilitated vascular smooth muscle layer regeneration and polarization of infiltrated macrophages to the M2 phenotype. Due to their superior performance and lack of occlusion, the medium-porosity vascular grafts were evaluated in long-term (24-months) in vivo implantation. The medium-porosity grafts regenerated the vascular smooth muscle cell layers and collagen extracellular matrix, which were circumferentially aligned and resembled the native artery. Furthermore, the formed neoarteries pulsed synchronously with the adjacent native artery and demonstrated contractile function. Overall, our study underscores the importance of braided silk fiber skeleton porosity on long-term vascular graft performance and will help to guide the design of next-generation vascular grafts.

Progress in the application of silk fibroin in tissue engineered drug delivery system

The properties and characteristics of different types of silk fibroin (SF) drug-loaded sustained-release carriers and their effects on the drug release behavior were reviewed, and the existing problems and development prospects of SF drug-loaded sustained-release carriers in tissue engineering drug delivery system were discussed. The literatures about drug-loaded SF sustained-release carriers in recent years were extensively consulted, and the types of sustained-release carriers, characteristics of drug release, range of applications, advantages and disadvantages, and solutions were summarized and analyzed. At present, the SF drug-loaded sustained-release carriers are mainly divided into SF microparticles, SF scaffolds, SF membranes, SF hydrogels, SF nanofibers, SF sponges, and so on. These types of SF drug-loaded sustained-release carriers have their own advantages and problems, of which the most prominent problem is the burst release of drugs at the initial stage. While, the initial burst release of drugs can be effectively solved by improving the preparation process and adjusting the material ratio. Different types of drug-loaded sustained-release carriers can be prepared by combining different materials to achieve different application scopes and drug release behaviors under different conditions. SF is a good drug-loaded carrier for tissue engineering, the burst release of drugs at the initial stage can be solved by improving the preparation process and changing the material structure; through the combination of the advantages of various types of SF drug-loaded sustained-release carriers, it is expected to prepare SF drug-loaded sustained-release carriers that meet different clinical needs.

Cryo-self-assembled silk fibroin sponge as a biodegradable platform for enzyme-responsive delivery of exosomes

Although advances in protein assembly preparation have provided a new platform for drug delivery during tissue engineering, achieving long-term controlled exosome delivery remains a significant challenge. Diffusion-dominated exosome release using protein hydrogels results in burst release of exosomes. Here, a fibroin-based cryo-sponge was developed to provide controlled exosome release. Fibroin chains can self-assemble into silk I structures under ice-cold conditions when annealed above the glass transition temperature. Exosome release is enzyme-responsive, with rates primarily determined by enzymatic degradation of the scaffolds. In vivo experiments have demonstrated that exosomes remain in undigested sponge material for two months, superior to their retention in fibrin glue, a commonly used biomaterial in clinical practice. Fibroin cryo-sponges were implanted subcutaneously in nude mice. The exosome-containing sponge group exhibited better neovascularization and tissue ingrowth effects, demonstrating the efficacy of this exosome-encapsulating strategy by realizing sustained release and maintaining exosome bioactivity. These silk fibroin cryo-sponges containing exosomes provide a new platform for future studies of exosome therapy.

All-in-One Silk Fibroin Sponge as the Vitrification Cryodevice of Rat Pancreatic Islets and the VEGF-Embedded Scaffold for Subrenal Transplantation

Islet transplantation is a promising option for the clinical treatment of insulin-dependent diabetes, but a reliable islet cryopreservation/transplantation protocol should be established to overcome the donor shortage. The current study reports that a silk fibroin (SF) sponge disk can be used as a cryodevice for vitrification of large quantity pancreatic islets and the scaffold for subsequent subrenal transplantation in a rat model. The marginal islet mass (550 islet equivalents [IEQs]) on an SF sponge disk was vitrified-warmed and transplanted beneath the kidney capsule of a streptozotocin-induced diabetic rat with or without vascular endothelial growth factor (VEGF). Subrenal transplantation (no scaffold) of 550 IEQ fresh islets and post-warm islets vitrified on a nylon mesh device resulted in achieving euglycemia of recipient rats at 60% and 0%, respectively. Transplantation of 550 IEQ islets vitrified-warmed on an SF sponge disk failed to achieve euglycemia of recipient rats (0%), but the VEGF inclusion in the SF sponge disk contributed to acquiring the euglycemic recipients (33%). All cured recipient rats regained hyperglycemia after nephrectomy, and the histopathologic analysis exhibited a well-developing blood vessel network into the islet engrafts. Thus, an SF sponge disc was successively available as the cryodevice for islet vitrification, the transporter of the angiogenic VEGF, and the scaffold for subrenal transplantation in the rat model.

Unconventional and Facile Fabrication of Chemically Reactive Silk Fibroin Sponges for Environmental Remediation.

Silk fibroin and silk microfibers, both derived from silk cocoon, have been widely used for prospective biomedical, energy, and environmental applications. However, various complex and catalyst-based approaches have been adopted for chemical modification and integration of different functionalities in silk fibroin-based materials. Here, both tailored water wettability and mechanical property have been associated with silk microfiber reinforced silk fibroin sponges (SMFRSFSs) through the strategic introduction of β-sheets and a facile and catalyst-free chemical reaction at ambient conditions. While the controlled tailoring of β-sheets in the silk fibroin skeletal framework of the sponges allowed us to modulate the compressive modulus, the 1,4-conjugate addition reaction between amine residues of silk (fiber and fibroin) and acrylate groups of a multifunctional cross-linker provided residual chemical reactivity. Further, the chemically "reactive" sponge was postmodified with the selected alkylamines to introduce a wide range of water wettability (from 36 to 161°) without affecting the mechanical property. Thereafter, the silk cocoon-derived and extremely water-repellent sponge was used for environment-friendly cleaning of oil spillages through selective absorption-based and filtration-based oil/water separation at different and severe aqueous conditions. This silk cocoon-derived mechanically tailorable and chemically reactive sponge could also be useful for various biomedical and energy-related applications.

Genetic hybridization of highly active exogenous functional proteins into silk-based materials using “light-clothing” strategy

Genetic hybridization of highly active exogenous functional proteins into silk-based materials using “light-clothing” strategy

A Promising Wound Dressing from Regenerated Silk Fibroin Sponge with Sustain-ed Release of Silver Nanoparticles

A silk fibroin (SF) spongy wound dressing incorporated with silver nanoparticles (Ag-NPs) was developed for biomedical applications. Ag-NPs were efficiently synthesized in situ via ultra violet (UV) with AgNO3 as precursor and silk fibroin as reducing and protecting agent, respectively. After lyophilization, the formed silk fibroin spongy wound dressing (SFWD) exhibited polyporous morphology and inner lamellae structures, with uniform dispersion of Ag-NPs. The porous structure provided SFWD with the ability to absorb tissue exudatealmost 6 times of its own weight, which could guarantee the sustained release of Ag-NPs. By methanol treatment, SFWD showed much improved mechanical properties and more stable to protease XIV. The cyto-compatibility of SFWD was supported by normal adherence and proliferation of NIH3T3 fibroblasts in sponges extracting culture medium. More important, the SFWD showed significant growth inhibition in both plate culture assays and bacterial suspension assays, with Grampositive (Staphylococcus aureus) and Gram-negative (Pseudomonas aeruginosa and Escherichia coli). In a cutaneous excisional mouse model, the average healing rates of SFWD was significantly higher than control and commercial bandages. The hematoxylin-eosin (HE) staining results of the wound section also showed that SFWD could recruit more cells and promote tissue formation on the wound edges.

Transplantation of rat pancreatic islets vitrified-warmed on the nylon mesh device and the silk fibroin sponge disc

ABSTRACT We report the adaptability of rat islets vitrified-warmed on nylon mesh (NM) device or silk fibroin (SF) sponge disc for the normalization of the blood glucose level in rat models of diabetes. One-hundred rat islets were cryopreserved according to a minimum volume cooling protocol on an NM device or a solid surface vitrification protocol on an SF sponge disc. The recovery rate (97.1% vs. 93.8%), the viability (77.9% vs. 74.4%), and the stimulation index (4.7 vs. 4.2) in glucose-stimulated insulin secretion (GSIS) assay of the post-warm islets were comparable between the NM vitrification and the SF vitrification groups. The viability and the stimulation index of the fresh control islets were identified to be 97.5% and 6.5, respectively. Eight hundred islets from the NM or the SF vitrification group or the fresh control group were transplanted beneath the kidney capsule of a streptozotocin-induced diabetic rat (blood glucose level > 350 mg/dl). Within 3 weeks after transplantation, the acquisition of euglycemia (< 200 mg/dl) was observed in recipient rats (80.0–83.3%). An intraperitoneal glucose tolerance test on Day-30 and Day-60 showed similar 2-h responses to the glucose uptake of cured rats among the compared groups. Moreover, the successful engraftment of transplants was confirmed by the Day-70 nephrectomy through the subsequent diabetes reversal and histological evaluation. Thus, large quantities of rat islets vitrified-warmed on an NM device or an SF sponge disc were proven to be fully functional both in vitro and in vivo, due to the GSIS and syngeneic transplantation, respectively.

Preparation of poly-dopamine-silk fibroin sponge and its dye molecular adsorption.

This paper proposes a process for fabricating a poly-dopamine-silk fibroin sponge (PDA-SF) by using dopamine self-assembly and coating the skeleton of a silk fibroin sponge. The PDA-SF sponge was characterized by SEM, TEM, XPS, XRD and FT-IR. It was found that the sponge exhibits sheet structures with a pore size of 60 ± 20 μm and poly-dopamine adhered to the surface of pure silk fibroin through noncovalent bond forces. With a hierarchical porous structure, the derived sponge provides fast flow channels and abundant active sites, which will benefit the diffusion and removal of cationic dyes. Batch adsorption and dynamic adsorption of crystal violet (CV) were studied. The batch adsorption capacity of the PDA-SF sponge for CV increased with its PDA content. Under a dynamic adsorption mode, the adsorption efficiency of the PDA-SF sponge for CV (5 mg/L, 200 mL) can reach up to 98.2% after 12 min, whereas it is only 90.2% under stationary mode after 72 h. Furthermore, the sponge shows an outstanding smart adsorption performance. More importantly, the composite sponge still keeps high separation and adsorption efficiencies after 20 cycles, and the appearance remains good.