Silica-coated Au Nanoparticles Research Articles

"Turn-on" and pinhole-free ultrathin core-shell Au@SiO2 nanoparticle-based metal-enhanced fluorescent (MEF) chemodosimeter for Hg2.

This study reports a metal-enhanced fluorescence chemodosimeter for highly sensitive detection of Hg2+ ions. Silica-coated Au nanoparticles (Au@SiO2 NPs) with a pinhole-free 4-5 nm shell were synthesized and functionalized with a monolayer of turn-on fluorescent probes. Compared to other organic fluorescent probes suffering from poor biocompatibility and detection limits, this design of a monolayer of turn-on fluorescent probes immobilized on the Au@SiO2 NPs with a pinhole-free 4-5 nm shell avoids fluorescence quenching and allows the fluorescent probe within the field of the inner Au NPs to experience metal-enhanced fluorescence. With this design, the chemodosimeter permits fluorescence emission in the presence of Hg2+ ions, because they trigger the ring-opening reaction of the fluorescent probe immobilized on the Au@SiO2 NPs. Additionally, the fluorescent probe is distanced by the thin SiO2 shell from directly attaching to the metallic Au NPs, which not only avoids fluorescence quenching but allows the fluorescent probe within the long-ranged field of the inner Au NPs to experience metal-enhanced fluorescence. As a result, the detection limit for the chemodosimeter can reach up to 5.0 × 10-11 M, nearly two orders of magnitude higher than that achieved for the free fluorescent probe. We also demonstrate the acquisition of images of Hg2+ in HTC116 cells and zebrafish using a simple fluorescence confocal imaging technique. The fluorescence response results for HTC116 cells and zebrafish show that the probes can permeate into cells and organisms. Considering the availability of the many organic fluorescent probes that have been designed, the current designed metal-enhanced fluorescence chemodosimeter holds great potential for fluorescence detection of diverse species and fluorescence imaging.

Importance of the Structural and Physicochemical Properties of Silica Nanoshells in the Photothermal Effect of Silica-Coated Au Nanoparticles Suspensions.

In this work, monodisperse silica-coated gold nanoparticles (NPs) were synthesized and used for obtaining aqueous colloidal dispersions with an optimum relationship between colloidal stability and photothermal activity. The idea behind this design was to produce systems with the advantages of the presence of a silica shell (biocompatibility, potential for surface modification, and protecting effect) with a minimal loss of optical and thermal properties. With this aim, the photothermal properties of NPs with silica shells of different thicknesses were analyzed under conditions of high radiation extinction. By using amorphous, gel-like silica coatings, thicknesses higher than 40 nm could be obtained without an important loss of the light absorption capacity of the colloids and with a significant photothermal response even at low NP concentrations. The effects produced by changes in the solvent and in the NP concentration were also analyzed. The results show that the characteristics of the shell control both, the photothermal effect and the optical properties of the colloidal dispersions. As the presence of a silica shell strongly enhances the possibilities of adding cargo molecules or probes, these colloids can be considered of high interest for biomedical therapies, sensing applications, remote actuation, and other technological applications.

Mapping Adsorbates with Shell-Isolated Nanoparticle Enhanced Raman Spectroscopy to Understand Rapid Superconformal Filling of Cu Trenches

Additive adsorbates are widely used as surfactants to guide morphological and microstructural evolution during electrochemical deposition of thin films. Even though this strategy has been employed for several decades understanding of the mechanisms at play on the interface remain limited. Modern spectroelectrochemical methods, from surface-enhanced Raman spectroscopy (SERS) to surface-enhanced infrared spectroscopy (SEIRAS) and non-linear optical methods like sum frequency generation (SFG) can provide significant insight into the composition, structure, and dynamics of the surfactant adsorbates through their vibrational signatures. on nominally static surfaces. Each strategy is limited to specimen geometry; SERS is closely linked to the use of rough, plasmonically-active surfaces while SEIRAS measurements are constrained to thin, IR-transparent, metallic films. In the last decade, a significant advance was the introduction of nanoparticle reporters, based largely on silica coated Au nanoparticles, that enable Raman spectroscopy studies on well-defined, single-crystal surfaces whereby the nanoparticle serves to channel the plasmonic energy to the nanoparticle-substrate interface. The silica or alternative coating materials are designed to be inert with respect to the chemistry of the adsorbate species under study while remaining thin enough to allow effective focusing of the optical energy. This approach has been adopted by several researchers interested in understanding molecular adsorption on well-defined, single-crystal surfaces, the electrical double layer, and numerous aspects of reactivity related to catalysis, batteries, electrodeposition, etc. The present work demonstrates the use of Au@SiO2 (core-shell) nanoparticles, also known as SHINERS (Shell-Isolated Nanoparticle-Enhanced Raman Spectroscopy), to enable in situ vibrational spectroscopic measurements during electroplating of comparatively smooth, rapidly advancing, surfaces. In particular, the ability of the reporters to float on an advancing surface while responding to area change is used to reveal important, area-driven changes in adsorbate coverage. This study also opens a new avenue for exploring the intersection of analytical surface chemistry and composite electroplating. Figure 1

Enhancing Catalytic Activity and Selectivity by Plasmon-Induced Hot Carriers.

SummaryPlasmon-assisted chemical transformation holds great potential for solar energy conversion. However, simultaneous enhancement of reactivity and selectivity is still challenging and the mechanism remains mysterious. Herein, we elucidate the localized surface plasmon resonance (LSPR)-induced principles underlying the enhanced activity (∼70%) and selectivity of photoelectrocatalytic redox of nitrobenzene (NB) on Au nanoparticles. Hot carriers selectively accelerate the conversion rate from NB to phenylhydroxylamine (PHA) by ∼14% but suppress the transformation rate from PHA to nitrosobenzene (NSB) by ∼13%. By adding an electron accepter, the as-observed suppression ratio is substantially enlarged up to 43%. Our experiments, supported by in situ surface-enhanced Raman spectroscopy and density functional theory simulations, reveal such particular hot-carrier-induced selectivity is conjointly contributed by the accelerated hot electron transfer and the corresponding residual hot holes. This work will help expand the applications of renewable sunlight in the directional production of value-added chemicals under mild conditions.

Vitamin C-Conjugated Nanoparticle Protects Cells from Oxidative Stress at Low Doses but Induces Oxidative Stress and Cell Death at High Doses.

Although the antioxidant property of vitamin C is well-known for protecting cells from oxidative stress, a recent study shows that it can also generate oxidative stress under a high intracellular concentration and induce cell death. However, poor chemical stability and low biological concentration (micromolar) of vitamin C restrict its function primarily as an antioxidant. Here, we report two different nanoparticle forms of vitamin C with its intact chemical stability, glucose-responsive release from nanoparticle, and efficient cell delivery in micro to millimolar concentrations. Nanoparticles are composed of silica-coated Au nanoparticles or lipophilic polyaspartic acid-based polymer micelles which are conjugated with vitamin C via phenylboronic acid. Surface chemistry of nanoparticles is optimized for an efficient cellular interaction/uptake and for cell delivery of vitamin C. We found that vitamin C protects cells from oxidative stress at micromolar concentrations, but at millimolar concentrations, it induces cell death by generating oxidative stress. In particular, high-dose vitamin C produces H2O2, disrupts the cellular redox balance, and induces cell death. This study highlights the concentration-dependent biological performance of vitamin C and the requirement of a high-dose cell delivery approach for enhanced therapeutic benefit.

Sensing behavior of silica-coated Au nanoparticles towards nitrobenzene

In the present work, we report silica-stabilized gold nanoparticles (SiO2/Au NPs) as a wide-range sensitive sensing material towards nitrobenzene (NB). Surface hydroxyl groups of silica selectively form Meisenheimer complex with electron-deficient aromatic ring of NB and facilitate its immobilization and subsequent catalytic reduction by Au cores. Silica-coated Au NPs were synthesized and characterized for their chemical, morphological, structural, and optical properties. SiO2/Au NPs-modified electrodes were characterized with impedometric and cyclic voltammetric electrochemical techniques. SiO2/Au NPs are found to have a higher optical detection window of range, 0.1 M to 1 μM and a lower electrochemical detection window of range, 10−4 to 2.5 × 10−2 mM with a detection limit of 12.3 ppb. A significant enhancement in cathodic peak current, C1, and sensitivity (102 μA/mM) was observed with modified electrode relative to bare and silica-modified electrodes. The IP was found to be linearly co-related to NB concentration (R2 = 0.985). The interference of cationic and anionic species on sensor sensitivity was also studied. Selectivity in the present sensing system may be further improved by modifying silica with specific functional moieties.

Photoluminescence of Individual Au/CdSe Nanocrystal Complexes with Variable Interparticle Distances

We investigate the photoluminescence behavior of individual CdSe nanocrystals attached to silica-coated Au nanoparticles. These hybrid nanostructures show enhanced photoluminescence intensity, suppressed off-states, as well as shorter lifetimes in comparison with the isolated CdSe nanocrystals. The very same investigated hybrid nanostructures are further relocated by transmission electron microscopy to study the corresponding structures and geometries. Correlating the optical and structural properties of the hybrid nanostructures, we find that the lifetime shortening of the CdSe nanocrystals depends on the distance between the CdSe nanocrystals and the Au nanoparticles. The results are compared with theoretical calculations based on the FDTD method and the Gersten–Nitzan model.

Thermally Stable Silica-Coated Hydrophobic Gold Nanoparticles

We have successfully developed a method for silica coating on hydrophobic dodecanethiol-protected Au nanoparticles with coating thickness ranging from 10 to 40 nm. The formation of silica-coated Au nanoparticles could be accomplished via the preparation of hydrophilic Au nanoparticle micelles by cationic surfactant encapsulation in aqueous phase, followed by hydrolysis of tetraethylorthosilicate on the hydrophilic surface of gold nanoparticle micelles. Silica-coated Au nanoparticles exhibited quite high thermal stability, that is, no agglomeration of the Au cores could be observed after annealing at 600 degrees C for 30 min. Silica-coated Au nanoparticles could serve as a template to derive hollow nanoparticles. An addition of NaCN solution to silica-coated Au nanoparticles led the formation of hollow silica nanoparticles, which were redispersible in deionized water. The formation of the hollow silica nanoparticles results from the mesoporous structures of the silica shell and such a mesoporous structure is applicable to both catalyst support and drug delivery.

Micro-patterns of Au@SiO 2 core-shell nanoparticles formed by electrostatic interactions

In this paper, silica-coated Au nanoparticles (Au@SiO 2) were prepared by the technique of vortex mixing. Subsequently, these monodisperse Au@SiO 2 nanoparticles were functionalized by the silane reagents 3-aminopropyltriethoxysilane (APS) and 3-mercaptopropyltriethoxysilane (MPTS) respectively. Then, these NH 2-terminated and SO 3 2−-terminated Au@SiO 2 nanoparticles were respectively assembled onto the substrates, which have been patterned with different self-assembly monolayers (SAMs), to form close-packed two-dimensional Au@SiO 2 nanoparticle arrays by electrostatic interactions. The morphologies and the optical properties of Au@SiO 2 nanoparticles with different silica-shell thicknesses were characterized by TEM and UV–vis. The compositions and zeta potentials of the functionalized Au@SiO 2 nanoparticles were examined by X-ray photoelectron spectroscopy (XPS) and dynamic light scattering (DLS). The morphologies of the patterns formed on different templates were characterized by atomic force microscopy (AFM).

Micropatterned Film of Silica-coated Gold Nanoparticles Formed by Covalent Bonds

Abstract With well-established surface-chemical properties, monodisperse silica-coated Au nanoparticles (Au@SiO2) were first functionalized with the silane reagent 3-gylcidoxypropyltrimethoxysilane (GPTS). Then, these epoxy-terminated Au@SiO2 nanoparticles could be easily assembled onto the silicon surface, which has been patterned with 3-aminopropyltriethoxysilane (APS) SAMs and octadecyltrichlorosilane (OTS) SAMs alternately, to form close-packed two-dimensional nanoparticle arrays by covalent bonding.

X-Ray Absorption of Gold Nanoparticles with Thin Silica Shell

Silica-coated gold (Au) nanoparticles were prepared and their morphological and X-ray absorption properties were investigated. These core-shell type nanoparticles are very stable in aqueous media and may be suitable for an X-ray contrast agent in biological systems. Transmission electron micrographs confirmed well-separated and relatively homogeneous morphology of the nanoparticles in highly concentrated colloids. Peak position for Au plasmon resonance was red-shifted with increasing shell thickness. X-ray absorption by the colloids of silica-coated Au nanoparticles was stronger than that by those of silica-coated Agl nanoparticles, a recently investigated X-ray contrast agent, at similar experimental conditions.

Gold and Silica-Coated Gold Nanoparticles as Thermographic Labels for DNA Detection

The infrared emissivity of Au and silica-coated Au nanoparticles (Au NPs) deposited on indium tin oxide substrates was investigated. NPs were irradiated with laser light at a frequency close to the Au plasmon resonance band, and the blackbody radiation emitted as a result was monitored with an IR camera equipped with an InAs array detector. The differences in temperature before and after laser irradiation were recorded (T-jumps) and were found to be directly proportional to the number of particles present on the slide and to the laser power used in the experiment. Coating Au NPs with silica increased the measured T-jumps 2-5 times, depending on the thickness of the silica shell. This was in agreement with the observation that silica has a much higher IR emissivity than Au. Both Au and silica-coated Au NPs were then tested as labels for thermographic DNA detection. Target DNA concentrations as low as 100 pM were recorded when Au NPs were used as labels and as low as 10 pM when silica-coated Au NPs were used.

Optically Active Poly(dimethylsiloxane) Elastomer Films Through Doping with Gold Nanoparticles

Poly(dimethylsiloxane) (PDMS) elastomer films synthesized through a cross-linking reaction between hydroxyl-terminated or vinyl-terminated PDMS have been homogeneously doped with silica-coated Au nanoparticles. The nanocomposite synthesis involves mixing a preformed colloid of surface-modified metal nanoparticles with the elastomer film precursors. The homogeneous distribution of nanoparticles is demonstrated through the presence of well defined plasmon absorbance bands in the visible, which clearly show that the composites retain the characteristic optical properties of single Au nanoparticles. The metal particle concentration could be easily tailored either through the amount or the concentration of the nanoparticle colloid added. Since the Au nanoparticles are not cross-linked to the polymer and the concentration of particles is relatively low, we postulate that the presence of the nanoparticles does not affect the mechanical properties of the films, though this remains to be confirmed.