Signal-to-noise Ratio Conditions Research Articles

A Dual-Stream Deep Learning-Based Acoustic Denoising Model to Enhance Underwater Information Perception

Estimating the line spectra of ship-radiated noise is a crucial remote sensing technique for detecting and recognizing underwater acoustic targets. Improving the signal-to-noise ratio (SNR) makes the low-frequency components of the target signal more prominent. This enhancement aids in the detection of underwater acoustic signals using sonar. Based on the characteristics of low-frequency narrow-band line spectra signals in underwater target radiated noise, we propose a dual-stream deep learning network with frequency characteristics transformation (DS_FCTNet) for line spectra estimation. The dual streams predict amplitude and phase masks separately and use an information exchange module to swap learn features between the amplitude and phase spectra, aiding in better phase information reconstruction and signal denoising. Additionally, a frequency characteristics transformation module is employed to extract convolutional features between channels, obtaining global correlations of the amplitude spectrum and enhancing the ability to learn target signal features. Through experimental analysis on ShipsEar, a dataset of underwater acoustic signals by hydrophones deployed in shallow water, the effectiveness and rationality of different modules within DS_FCTNet are verified.Under low SNR conditions and with unknown ship types, the proposed DS_FCTNet model exhibits the best line spectrum enhancement compared to methods such as SEGAN and DPT_FSNet. Specifically, SDR and SSNR are improved by 14.77 dB and 13.58 dB, respectively, enabling the detection of weaker target signals and laying the foundation for target localization and recognition applications.

Optimized Radio Frequency Footprint Identification Based on UAV Telemetry Radios.

With the widespread use of unmanned aerial vehicles (UAVs), the detection and identification of UAVs is a vital security issue for the safety of airspace and ground facilities in the no-fly zone. Telemetry radios are important wireless communication devices for UAVs, especially in UAVs beyond the visual line of sight (BVLOS) operating mode. This work focuses on the UAV identification approach using transient signals from UAV telemetry radios instead of the signals from UAV controllers that the former research work depended on. In our novel UAV Radio Frequency (RF) identification system framework based on telemetry radio signals, the EC-α algorithm is optimized to detect the starting point of the UAV transient signal and the detection accuracy at different signal-to-noise ratios (SNR) is evaluated. In the training stage, the Convolutional Neural Network (CNN) model is trained to extract features from raw I/Q data of the transient signals with different waveforms. Its architecture and hyperparameters are analyzed and optimized. In the identification stage, the extracted transient signals are clustered through the Self-Organizing Map (SOM) algorithm and the Clustering Signals Joint Identification (CSJI) algorithm is proposed to improve the accuracy of RF fingerprint identification. To evaluate the performance of our proposed approach, we design a testbed, including two UAVs as the flight platform, a Universal Software Radio Peripheral (USRP) as the receiver, and 20 telemetry radios with the same model as targets for identification. Indoor test results show that the optimized identification approach achieves an average accuracy of 92.3% at 30 dB. In comparison, the identification accuracy of SVM and KNN is 69.7% and 74.5%, respectively, at the same SNR condition. Extensive experiments are conducted outdoors to demonstrate the feasibility of this approach.

Telescope imaging beyond the Rayleigh limit in extremely low SNR

Abstract The Rayleigh limit and low Signal-to-Noise Ratio (SNR) scenarios pose significant limitations to optical imaging systems used in remote sensing, infrared thermal imaging, and space domain awareness. In this study, we introduce a Stochastic Sub-Rayleigh Imaging (SSRI) algorithm to localize point objects and estimate their positions, brightnesses, and number in low SNR conditions, even below the Rayleigh limit. Our algorithm adopts a maximum likelihood approach and exploits the Poisson distribution of incoming photons to overcome the Rayleigh limit in low SNR conditions. In our experimental validation, which closely mirrors practical scenarios, we focus on conditions with closely spaced sources within the sub-Rayleigh limit (0.49-1.00R) and weak signals (SNR less than 1.2). We use the Jaccard index and Jaccard efficiency as a figure of merit to quantify imaging performance in the sub-Rayleigh region. Our approach consistently outperforms established algorithms such as Richardson-Lucy and CLEAN by 4X in the low SNR, sub-Rayleigh regime. Our SSRI algorithm allows existing telescope-based optical/infrared imaging systems to overcome the extreme limit of sub-Rayleigh, low SNR source distributions, potentially impacting a wide range of fields, including passive thermal imaging, remote sensing, and space domain awareness.

Unsupervised deep learning method for single image super-resolution of the thick pinhole imaging system using deep image prior

Thick pinhole imaging system is widely used for diagnosing intense pulsed radiation sources. However, owing to the trade-off among spatial resolution, field of view (FOV) and signal-to-noise ratio (SNR), the imaging system normally falls short in achieving high-precision spatial diagnosis. In this paper, we propose an unsupervised deep learning method for single image super-resolution (SISR) of the thick pinhole imaging system. The point spread function (PSF) of the imaging system is obtained by analytical calculation and Monte Carlo simulation methods, and the mathematical model of the imaging system is established using a linear equation. To solve the ill-posed inverse problem, we adopt randomly initialized deep convolutional neural networks (DCNNs) as an image prior without pre-training, which is named deep image prior (DIP). The results demonstrate that, by utilizing the SISR technique to increase the number of pixels in reconstructed images, the proposed DIP algorithm can mitigate the spatial resolution degradation caused by an insufficient spatial sampling frequency of the camera. Compared with various classical algorithms, the proposed DIP algorithm exhibits superior capabilities in recovering high-frequency signals and suppressing ringing artifacts. Furthermore, the convergence and robustness of the proposed DIP algorithm under different random seeds and SNR conditions are also verified.

Accurate gain method for ground-penetrating radar signals based on stationary wavelet packet transform

In this study, we propose an accurate gain method for ground-penetrating radar (GPR) signals based on the characteristics of refined time-frequency analysis and translation invariance offered by the Stationary Wavelet Packet Transform (SWPT), combined with the conventional signal gain approach. This method aims to address the issue of low signal resolution resulting from the direct gain processing of GPR signals with a low signal-to-noise ratio (SNR). Specifically, the GPR signals are initially decomposed into appropriate wavelet packet coefficients using SWPT, wherein only those coefficients with high SNR undergo gain processing, followed by reconstruction of the signals through SWPT. By employing accurate gain processing on low SNR GPR signals acquired during concrete crack detection tests, we have confirmed that the proposed method effectively distinguishes the target reflected signals from most noise, thereby achieving accurate amplification of the desired reflected signals and significantly enhancing the GPR signals resolution under low SNR conditions.

Enhancing radio signal classification under low SNR conditions using deep residual networks with channel attention mechanisms

This paper delves into the advancement of deep residual networks (ResNets) integrated with channel attention mechanisms for the classification of radio signals under conditions of low Signal-to-Noise Ratio (SNR). Utilizing an expansive dataset of radio signals, this paper introduces a novel architecture, MyResNet1, that combines residual learning with channel-wise attention, allowing the model to concentrate on essential features for precise classification. My, investigations exhibit notable improvements in classification accuracy, especially in challenging low SNR scenarios, highlighting the potential of attention-augmented deep residual networks in radio signal processing. Furthermore, this studyexplores various optimization strategies, including data augmentation and regularization techniques, to enhance the models performance and robustness. My findings contribute significantly to cognitive radio technologies and illuminate the potential of deep learning in sophisticated signal classification tasks, aligned with recent explorations in automatic modulation recognition (AMR) through deep learning and autoencoder-based methodologies for enhancing I/Q channel interactions.

Modulation recognition of underwater acoustic communication signals based on neural architecture search

Modulation recognition of underwater communication signals is a critical aspect of underwater information confrontation. However, the current deep learning-based methods for underwater communication modulation recognition often mimic neural network architectures used in image processing and speech processing, tending to perform poorly in low signal-to-noise ratio (SNR) conditions. This paper introduces a novel approach by utilizing neural architecture search (NAS) method. By automatically searching for neural architectures that are well-suited for modulation recognition in underwater environment, our proposed method improves the classification performance particularly in low SNR conditions. Furthermore, we have also proposed a recognition method based on attention mechanism and feature fusion, which substantially enhances the accuracy of identifying phase-modulated signals. Numerical simulation and experimental data are used to demonstrate performance of proposed methods.

Noncooperative Spectrum Sensing Strategy Based on Recurrence Quantification Analysis in the Context of the Cognitive Radio

This paper addresses the problem of noncooperative spectrum sensing in very low signal-to-noise ratio (SNR) conditions. In our approach, detecting an unoccupied bandwidth consists of detecting the presence or absence of a communication signal on this bandwidth. Digital communication signals may contain hidden periodicities, so we use Recurrence Quantification Analysis (RQA) to reveal the hidden periodicities. RQA is very sensitive and offers reliable estimation of the phase space dimension m or the time delay τ. In view of the limitations of the algorithms proposed in the literature, we have proposed a new algorithm to simultaneously estimate the optimal values of m and τ. The new proposed optimal values allow the state reconstruction of the observed signal and then the estimation of the distance matrix. This distance matrix has particular properties that we have exploited to propose a Recurrence-Analysis-based Detector (RAD). The RAD can detect a communication signal in a very low SNR condition. Using Receiver Operating Characteristic curves, our experimental results corroborate the robustness of our proposed algorithm compared with classic widely used algorithms.

Rotating machinery weak fault features enhancement via line-defect phononic crystal sensing

The fault features of rotating machinery at the early degradation stage are always weak as a result of interference from strong noise and irrelevant harmonics. Although traditional acoustic diagnosis techniques have attracted much attention with the merits of rich information and non-contact, extracting meaningful features related to faults in extremely low signal-to-noise ratios (SNRs) has always been a challenging problem. Considering the extraordinary physical properties of phononic crystals (PnCs) and acoustic metamaterials, this study proposes a structural enhancement method for rotating machinery fault diagnosis via line-defect PnC sensing. In contrast to conventional acoustic filtering and enhancement methods, this method can directly filter out noise and enhance fault features in the pre-processing stage of acoustic perception without the need for complex post-processing algorithms. Consequently, the original information of the fault features is preserved intact, thus further increasing the detection limit of current acoustic sensing. Specially, the designed line-defect PnC is parametrically tunable. Combined with the prior knowledge of rotating machinery fault features, such as gears and bearings, it is possible to design structures suitable for enhancing their fault features, which has great potential for practical engineering applications. The enhancement mechanism of line-defect PnC is theoretically described, and numerical simulations are also conducted to verify its ability to detect weak faults in rotating machinery. The experimental results show that by comparison with the variational modal decomposition (VMD)-based method, the proposed method exhibits superior fault feature enhancement performance under low SNR conditions. By systematically combining fault detection methods and acoustic metamaterial sensing, it can be foreseen that the proposed method shows great potential in mechanical equipment fault diagnosis.

The Effects of Light Level and Signal-to-Noise Ratio on the Task-Evoked Pupil Response in a Speech-in-Noise Task.

There is increasing interest in the measurement of cognitive effort during listening tasks, for both research and clinical purposes. Quantification of task-evoked pupil responses (TEPRs) is a psychophysiological method that can be used to study cognitive effort. However, light level during cognitively demanding listening tasks may affect TEPRs, complicating interpretation of listening-related changes. The objective of this study was to examine the effects of light level on TEPRs during effortful listening across a range of signal-to-noise ratios (SNRs). Thirty-six adults without hearing loss were asked to repeat target sentences presented in background babble noise while their pupil diameter was recorded. Light level and SNRs were manipulated in a 4 × 4 repeated-measures design. Repeated-measures analyses of variance were used to measure the effects. Peak and mean dilation were typically larger in more adverse SNR conditions (except for SNR -6 dB) and smaller in higher light levels. Differences in mean and peak dilation between SNR conditions were larger in dim light than in brighter light. Brighter light conditions make TEPRs less sensitive to variations in listening effort across levels of SNR. Therefore, light level must be considered and reported in detail to ensure sensitivity of TEPRs and for comparisons of findings across different studies. It is recommended that TEPR testing be conducted in relatively low light conditions, considering both background illumination and screen luminance. https://doi.org/10.23641/asha.25676538.

Underwater Coherent Source Direction-of-Arrival Estimation Method Based on PGR-SubspaceNet

In the field of underwater acoustics, the signal-to-noise ratio (SNR) is generally low, and the underwater environment is complex and variable, making target azimuth estimation highly challenging. Traditional model-based subspace methods exhibit significant performance degradation when dealing with coherent sources, low SNR, and small snapshot data. To overcome these limitations, an improved model based on SubspaceNet, called PConv-GAM Residual SubspaceNet (PGR-SubspaceNet), is proposed. This model embeds the global attention mechanism (GAM) into residual blocks that fuse PConv convolution, making it possible to capture richer cross-channel and positional information. This enhancement helps the model learn signal features in complex underwater conditions. Simulation results demonstrate that the underwater target azimuth estimation method based on PGR-SubspaceNet exhibits lower root mean square periodic error (RMSPE) values when handling different numbers of narrowband coherent sources. Under low SNR and limited snapshot conditions, its RMSPE values are significantly better than those of traditional methods and SubspaceNet-based enhanced subspace methods. PGR-SubspaceNet extracts more features, further improving the accuracy of direction-of-arrival estimation. Preliminary experiments in a pool validate the effectiveness and feasibility of the underwater target azimuth estimation method based on PGR-SubspaceNet.

Automatic Modulation Recognition Method Based on Phase Transformation and Deep Residual Shrinkage Network

Automatic Modulation Recognition (AMR) is currently a research hotspot, and research under low Signal-to-Noise Ratio (SNR) conditions still poses certain challenges. This paper proposes an AMR method based on phase transformation and deep residual shrinkage network to improve recognition accuracy. Firstly, the raw I/Q data from the benchmark dataset RML2016.10a are used as the input. Then, an end-to-end modulation recognition is performed using the model. Phase transformation is used to correct the raw I/Q data and reduce the interference of phase shift on modulation recognition. Convolutional neural network (CNN) and Gate Recurrent Unit (GRU) extract the spatial and temporal features of the modulation signal, respectively. The improved deep residual shrinkage network is added after CNN to eliminate unimportant features through soft thresholding. Finally, the proposed model is trained and tested. The experimental results show that the proposed model notably reduces the number of parameters compared to other models, effectively improving the recognition accuracy under low SNR conditions. The average recognition accuracy reaches 62.46%, and the highest recognition accuracy reaches 92.41%.

Improving the Accuracy of Direction of Arrival Estimation with Multiple Signal Inputs Using Deep Learning.

In this paper, an innovative cyclic noise reduction method and an improved CAPON algorithm (also the called minimum variance distortionless response (MVDR) algorithm) are proposed to improve the accuracy and reliability of DOA (direction of arrival) estimation. By processing the eigenvalues obtained from the covariance matrix of the received signal, the signal-to-noise ratio (SNR) can be increased by up to 5 dB by the cyclic noise reduction method, which will improve the DOA estimation accuracy. The improved CAPON algorithm has a convolution neural network (CNN) structure, whose input is the processed covariance matrix of the received signal, and the CAPON spectral value is used as the training label to obtain the estimated spatial spectrum. It retains the advantages of the CAPON algorithm, which can achieve blind source estimation, and simulations show that the proposed algorithm exhibits a better performance than the traditional algorithm in conditions of various SNRs and snapshot numbers. The simulation results show that, based on a certain SNR, the root mean square error (RMSE) of the improved CAPON algorithm can be reduced from 0.86° to 0.8° compared to traditional algorithms, and the angle estimation error can be decreased by up to about 0.3°. With the help of the cyclic noise reduction method, the angle estimation error decreases from 0.04° to 0.02°.

Research on Communication Signal Modulation Recognition Based on a CCLDNN

In this paper, a new automatic modulation recognition (AMR) method named CCLDNN (complex-valued convolution long short-term memory deep neural network) is proposed. It is designed to significantly improve the recognition accuracy of modulation modes in low signal-to-noise ratio (SNR) environments. The model integrates the advantages of existing mainstream neural networks. The phase and amplitude information of complex signals is effectively captured through a complex module in the input layer. The Squeeze-and-Excitation (SE) attention mechanism, Bi-LSTM layer, and deep convolutional layer are introduced in the feature extraction layer to gradually enhance feature expression. Among these, the introduction of LSTM enables the model to capture the sequence dependence of signals, and the application of the SE attention mechanism further improves the model’s ability to focus on key features. Tests using the RadioML2016.10a dataset show that the model performs well at multiple SNR levels, achieving an average recognition accuracy of more than 80% over an SNR range of 0 dB to 18 dB. However, under the condition of a low SNR from −20 dB to −2 dB, the model still maintains a high recognition ability. The advanced CCLDNN method shows great deep learning potential in solving practical communication problems.

A New Extended Target Detection Method Based on the Maximum Eigenvalue of the Hermitian Matrix

In the field of radar target detection, the conventional approach is to employ the range profile energy accumulation method for detecting extended targets. However, this method becomes ineffective when dealing with non-stationary and non-uniform radar clutter scenarios, as well as long-distance targets with weak radar cross sections (RCSs). In such cases, the signal-to-noise ratio (SNR) of the target echo is severely degraded, rendering the energy accumulation detection algorithm unreliable. To address this issue, this paper presents a new extended target detection method based on the maximum eigenvalue of the Hermitian matrix. This method utilizes a detection model that incorporates observed data and employs the likelihood ratio test (LRT) theory to derive the maximum eigenvalue detector at low SNR. Specifically, the detector constructs a matrix using a sliding window block with the available data and then computes the maximum eigenvalue of the covariance matrix. Subsequently, the maximum eigenvalue matrix is transformed into a one-dimensional eigenvalue image, enabling extended target detection through analogy with the energy accumulation detection method. Furthermore, this paper analyzes the proposed extended target detection method from both theoretical and experimental perspectives, validating it through field-measured data. The results obtained from the measured data demonstrate that the method effectively enhances the SNR in low SNR conditions, thereby improving target detection performance. Additionally, the method exhibits robustness across different scattering center targets.

Reliable arrival time picking of acoustic emission using ensemble machine learning models

This study presents an innovative method for accurately picking the first-wave arrival time in acoustic emission (AE) localization, particularly effective in environments with low or variable signal-to-noise ratios (SNR). Utilizing an ensemble learning model, it synergizes multiple automatic arrival time estimation algorithms to enhance both consistency and robustness. The model, rooted in decision tree methodologies, integrates a variety of techniques, including Akaike information criterion (AIC), improved AIC, Hinkley, energy ratios, and wavelet transformation-based binary map. Its efficacy is demonstrated through testing on 549 manually annotated AE datasets, where the model’s predictions were benchmarked against manual picks, showcasing superior accuracy and robustness in AE event source localization. Evaluations of the model’s performance across various ensemble machine learning models highlighted its ability to significantly diminish localization errors, achieving an average absolute error of less than 1.5 mm. The study also delved into the impact of base pickers and the size of the training dataset on the model’s predictions. Findings indicated consistent performance across different decision tree models, with the accuracy of base pickers and training set size playing a significant role in outcomes. This research culminates in a decision tree-based ensemble machine learning solution that effectively estimates AE first-wave arrival times with high accuracy and robustness, even amidst fluctuating SNR conditions. Its adaptability and interpretability greatly reduce source localization errors in practical AE monitoring, effectively overcoming challenges associated with imprecise arrival time picking.

Improving ranging performance of SiPM LiDAR in low SNR conditions through an echo processing method and laser pulse modulation

Due to its numerous advantages such as high gain and low operating bias, the silicon photomultiplier (SiPM) holds great potential in LiDAR applications. However, it is more jittery at weak echoes and more sensitive to ambient light, making its ranging performance at low signal-to-noise ratios (SNRs) severely deteriorated. To enhance the ranging performance of SiPM LiDAR under low SNR, a novel echo processing method, to the best of our knowledge, was proposed based on the statistical property of SiPM responses and validated under relatively intensive sunlight (>50klx) using a self-developed LiDAR system. At the same time, laser pulse width modulation and multi-pulse laser emission are used in ranging experiments to maximize the advantages of this method. It has shown that increasing the laser pulse width within a certain range can improve ranging performance, and that emitting multiple laser pulses improves ranging performance more significantly. Utilizing a three-pulse laser with a peak power of only 3.2 W, a target 122 m away was ranged with a precision of 6.53 cm with only five accumulations.

SDR implementation of a light deep learning model based CNN for joint spectrum sensing and AMC

Automatic modulation classification (AMC) aims to blindly recognize the modulation type of a received signal in wireless systems. It is also a critical component of non-cooperative communication systems after the detection of the presence of a signal. In this paper, we introduce a robust approach, termed DET-AMC (joint Detection and Automatic Modulation Classification), employing Convolutional Neural Networks (CNNs) trained via transfer learning methodology. The main advantage of our approach is its ability to handle a wide range of modulation types, including 10 different schemes generated in Gnuradio and their detection using the same model. Through extensive experimentation, we evaluate the performance of our light CNN-based DET-AMC method across varying signal-to-noise ratio (SNR) levels, as well as in the presence of phase noise and frequency offset. We find that the CNN’s learned features, obtained through transfer learning, exhibit robustness, particularly in low SNR and various challenging conditions, leading to accurate modulation classification. In general, our approach outperforms existing methods by using the effectiveness of deep learning in capturing relevant discriminative features. Additionally, our model offers a robust solution for join detection and AMC by achieving an accurate probability of detection and modulation classification without the need for manual feature engineering or the consideration of frequency offset, phase noise or noise estimation. Our model achieves 100% accuracy for synthetic and real data at an SNR equal to -10 dB for detection, and 100% and 98% for classification of synthetic and real signals at −4 dB, respectively.

Hepatic steatosis modeling and MRI signal simulations for comparison of single- and dual-R2* models and estimation of fat fraction at 1.5T and 3T

Background and objectiveMagnetic resonance imaging (MRI) has emerged as a noninvasive clinical tool for assessment of hepatic steatosis. Multi-spectral fat-water MRI models, incorporating single or dual transverse relaxation decay rate(s) (R2*) have been proposed for accurate fat fraction (FF) estimation. However, it is still unclear whether single- or dual-R2* model accurately mimics in vivo signal decay for precise FF estimation and the impact of signal-to-noise ratio (SNR) on each model performance. Hence, this study aims to construct virtual steatosis models and synthesize MRI signals with different SNRs to systematically evaluate the accuracy of single- and dual-R2* models for FF and R2* estimations at 1.5T and 3.0T. MethodsRealistic hepatic steatosis models encompassing clinical FF range (0–60 %) were created using morphological features of fat droplets (FDs) extracted from human liver biopsy samples. MRI signals were synthesized using Monte Carlo simulations for noise-free (SNRideal) and varying SNR conditions (5–100). Fat-water phantoms were scanned with different SNRs to validate simulation results. Fat water toolbox was used to calculate R2* and FF for both single- and dual-R2* models. The model accuracies in R2* and FF estimates were analyzed using linear regression, bias plot and heatmap analysis. ResultsThe virtual steatosis model closely mimicked in vivo fat morphology and Monte Carlo simulation produced realistic MRI signals. For SNRideal and moderate-high SNRs, water R2* (R2*W) by dual-R2* and common R2* (R2*com) by single-R2* model showed an excellent agreement with slope close to unity (0.95–1.01) and R2 > 0.98 at both 1.5T and 3.0T. In simulations, the R2*com-FF and R2*W-FF relationships exhibited slopes similar to in vivo calibrations, confirming the accuracy of our virtual models. For SNRideal, fat R2* (R2*F) was similar to R2*W and dual-R2* model showed slightly higher accuracy in FF estimation. However, in the presence of noise, dual-R2* produced higher FF bias with decreasing SNR, while leading to only marginal improvement for high SNRs and in regions dominated by fat and water. In contrast, single-R2* model was robust and produced accurate FF estimations in simulations and phantom scans with clinical SNRs. ConclusionOur study demonstrates the feasibility of creating virtual steatosis models and generating MRI signals that mimic in vivo morphology and signal behavior. The single-R2* model consistently produced lower FF bias for clinical SNRs across entire FF range compared to dual-R2* model, hence signifying that single-R2* model is optimal for assessing hepatic steatosis.

Intelligent interference cancellation and ambient backscatter signal extraction for wireless-powered UAV IoT network

Unmanned aerial vehicles (UAVs) offer a new approach to wireless communication, leveraging their high mobility, flexibility, and visual communication capabilities. Ambient backscatter communication enables Internet of Things devices to transmit data by reflecting and modulating ambient radio waves, eliminating the need for additional wireless channels, and reducing energy consumption and cost for sensors. However, passive ambient backscatter communication has limitations such as limited range and poor communication quality. By utilizing UAVs as communication nodes, these limitations can be overcome, expanding the communication range and improving the quality of communication. Although some research has been conducted on combining UAVs and ambient backscatter, several challenges remain. One key challenge is the strong direct link interference in ambient backscatter under UAV conditions, which significantly affects communication quality. In this paper, we propose an intelligent backward and forward straight link interference cancellation algorithm based on NOMA decoding technique to enhance ambient backscatter communication quality under UAV conditions and extract more ambient energy for UAV energy supply. The paper includes theoretical derivation, algorithm description, and simulation analysis to validate the error bit rate of labeled information bits. The results demonstrate that the forward algorithm reduces the error bit rate by approximately 20% under low signal-to-noise ratio (SNR) conditions, while the backward algorithm reduces the error bit rate under high SNR conditions. The combination of the forward and backward algorithms reduces the error bit rate under both high and low SNR conditions. The proposed method contributes to improving the quality of ambient backscatter communication in UAV settings.