Short Alkyl Chain Research Articles

Revealing the antioxidant properties of alkyl gallates: a novel approach through quantum chemical calculations and molecular docking.

This study investigates the antioxidant potential of alkyl gallates (C1-C10), focusing on the impact of alkyl chain length and solvent polarity on their antioxidant properties. Known for their biomedical relevance in mitigating oxidative stress, alkyl gallates' structure-activity relationships, particularly regarding chain length and environmental factors, still need to be explored. Key thermochemical parameters, including bond dissociation enthalpy (BDE), ionization potential (IP), proton affinity (PA), and electron transfer enthalpy (ETE), reveal that shorter alkyl chains (C1-C4) exhibit superior antioxidant activity. In contrast, longer chains (C5-C10) show reduced effectiveness due to steric hindrance and lower solubility in polar solvents. Molecular docking studies also demonstrated favorable binding interactions with vital biological targets, further reinforcing their antioxidant potential. Quantum chemical calculations were performed using Gaussian 16 with the B3LYP/6-311G(dp) basis set for geometry optimizations. Solvent effects were modeled using the integral equation formalism-polarized continuum model (IEF-PCM). Molecular docking studies were conducted using AutoDockTools 4.2, targeting Tyrosine Kinase Hck, Heme Oxygenase, and Human Serum Albumin to evaluate fundamental binding interactions. These computational methods provided insights into alkyl gallates' chemical reactivity and antioxidant efficiency, allowing for the rational design of more potent antioxidant compounds.

Organic BODIPY based gels: Optical, electrochemical and self-assembly properties.

Two novel BODIPY dyes, BOC3 and BC12, were synthesized with variable alkyl chains at terminal amide functional units. BC12, featuring a longer alkyl chain (-C12H25), formed a gel compared to BOC3, which has a shorter alkyl chain (-CH2OCH3), due to supra molecular self-assembly in film. Both dyes exhibited absorption peaks around 530 nm in the visible region, with a red shift of about 30 nm in the film state, essential for organic electronic applications. Concentration variation studies revealed π-π stacking/aggregates in the solid state causing red shifts in absorption and emission. BC12 exhibited more significant red shifts in film compared to its solution state due to supra molecular self-assembly. Electronic structure analysis using density functional theories (BMK and O3LYP) showed better correlation with absorption using the O3LYP method. Both dyes displayed quasi-irreversible oxidation and reduction couples with suitable HOMO (5.46 eV) and LUMO (3.32 eV) energy levels for organic electronic applications. Transient photoluminescence studies indicated a longer lifetime for BC12 (5.28 ns) than BOC3 (4.50 ns), suggesting π-π aggregation and supra molecular self-assembly. BC12's gelation, attributed to its long alkyl chain and two-dimensional motifs of the BODIPY core, forms spherical-shaped nano networks.

Protocells by spontaneous reaction of cysteine with short-chain thioesters.

All known forms of life are composed of cells, whose boundaries are defined by lipid membranes that separate and protect cell contents from the environment. It is unknown how the earliest forms of life were compartmentalized. Several models have suggested a role for single-chain lipids such as fatty acids, but the membranes formed are often unstable, particularly when made from shorter alkyl chains (≤C8) that were probably more prevalent on prebiotic Earth. Here we show that the amino acid cysteine can spontaneously react with two short-chain (C8) thioesters to form diacyl lipids, generating protocell-like membrane vesicles. The three-component reaction takes place rapidly in water using low concentrations of reactants. Silica can catalyse the formation of protocells through a simple electrostatic mechanism. Several simple aminothiols react to form diacyl lipids, including short peptides. The protocells formed are compatible with functional ribozymes, suggesting that coupling of multiple short-chain precursors may have provided membrane building blocks during the early evolution of cells.

Bushy-Tailed Multicationic Quaternary Phosphonium Compounds: Potent Amphiphilic Disinfectants with Promising Therapeutic Indices.

Quaternary ammonium compounds (QACs) have been essential for protecting human health for almost a century, functioning as surface disinfectants and sanitizers. With bacterial resistance increasing against commercially available QACs, the development of novel antimicrobials with divergent architectures is essential for effective infection prevention and control. Toward this end, our group has expanded beyond traditional ammonium scaffolds and explored the development of quaternary phosphonium compounds (QPCs). Herein, we report the synthesis and biological investigation of a series of 20 novel multicationic QPCs, bearing multiple short alkyl or aryl chains, also referred to as "bushy-tailed" multiQPCs; these structures were hypothesized to have strong bioactivity while displaying low mammalian toxicity. Select bushy-tailed QPC derivatives with trishexylphosphonium groups displayed single-digit or sub-micromolar activity against all seven bacteria tested, and MIC values of 2- to 8-fold better than their bushy-tailed QAC counterparts. Importantly, therapeutic indices of these bushy-tailed QPCs were favorable in many cases, and were ≥ 4 against the entire bacterial panel for pX-P6*,P6* and 1,8-P6*,P6*, superior to more traditional architectures. This work highlights the promise of a novel set of multicationic phosphonium compounds as novel disinfectants with potent bioactivities and low toxicity.

Nucleophilic Displacement Reactions of Silver-Based Metal-Organic Chalcogenolates.

We report nucleophilic displacement reactions that can increase the dimensionality or coordination number of silver-based metal-organic chalcogenolates (MOChas). MOChas are crystalline ensembles containing one-dimensional (1D) or two-dimensional (2D) inorganic topologies with structures and properties defined by the choice of metal, chalcogen, and ligand. MOChas can be readily prepared from a variety of small-molecule ligands and metals or metal ions. Although MOChas offer ligand diversity, most reported examples use relatively small ligands, typically involving short alkyl chains, aryl rings, or molecular cages. This is because larger, more complex molecules often yield poor product morphologies with indeterminate structures. In this study, we overcame this limitation by employing a ligand exchange strategy whereby a 1D MOCha, silver(I) methyl 2-mercaptobenzoate (2MMB), is used as a silver source for preparing 2D examples. The reaction proceeds generally toward products composed of the stronger nucleophile. We show that the reaction prefers displacing 1D topologies to yield 2D ones and replacing thiolates with selenolates. We performed a study to characterize the mechanism by which organic chalcogenols and dichalcogenides exchange with MOChas. The collected data and product analysis support a proposed mechanism of nucleophilic substitution, explaining how both organic chalcogenols and dichalcogenides can displace ligands in MOChas. This work provides a new synthetic route that will enable the preparation of more elaborate MOChas and heterostructures thereof. This approach enabled the preparation of previously inaccessible oligophenyl MOChas, which were successfully solved via small-molecule serial femtosecond crystallography (smSFX) at the SPring-8 Ångström Compact Free Electron LAser (SACLA) facility.

Molecular dynamics study on effects of the synergistic effect of anions and cations on the dissolution of cellulose in ionic liquids

This work systematically explores the interaction between cellulose and various ionic liquids (ILs) formed by the pairing of glycine cations with diverse anions. Results show that the interaction of anions with cellulose decreases in the order of [CH3COO]− > [Im]− > [SCN]− > Cl− > [PF6]−, differing from imidazole-based ionic liquids. The synergistic effect of anions and cations is crucial for cellulose dissolution. Moreover, the electronegativity of anions can enhance their interaction with cellulose. Short alkyl chains (n = 1, 3, 5) reduce hydrogen bonding due to steric hindrance, while longer chains (n = 9) promote diffusion and hydrogen bond formation. The introduction of electron-withdrawing groups to anions weakens their interaction with cellulose, while marginally strengthening the association between cations and cellulose. Overall, a delicate balance among anion-cation-cellulose interactions is essential for effective cellulose dissolution. The obtained results are anticipated to be of significant importance in the rational design of innovative amino acid-based ionic liquids, aiming to achieve efficient cellulose dissolution.

Heavea brasilienis (Rubber seed oil) as cost effective non edible feedstock for sustainable high quality biofuel production.

Biodiesel is renewable fuel acquired from biomass which has short chain alkyl esters derived from vegetable oil or animal fats. It has greater advantages over traditional diesel oil. In first level esterification, H2SO4 is used because the acid catalyst to decrease the FFA from 4. 5% to 0. 85 %. In 2nd stage, transesterification chemical process was carried with methanol and NaOH, the elevated temperature 600c and response time is 45 min to 75min. Only a few experiments have been carried out for evaluating the results of equation using a Scientific tool.

Probing the Influence of Hydrophobicity of Modified Gold Nanoparticles in Modulating the Lipid Surface Behavior Using Vibrational Sum Frequency Generation Spectroscopy.

A deep understanding of how the surface modifications of nanoparticles impact their interactions with cell membranes is vital for advancing safe and effective biomedical applications. Among the pivotal factors governing these interactions, the hydrophobicity of nanoparticles plays a crucial role, predominantly driven by the hydrophobic interactions with the cell membrane. Herein, we study the influence of the hydrophobic alkyl chain length of thiol-capped gold nanoparticles (GNPs) on lipid surfaces with the help of vibrational sum frequency generation spectroscopy. We have utilized the zwitterionic 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) lipid monolayer as a representative model of cell membranes on the water surface. Our findings revealed that GNPs capped with the thiol ligand having a shorter alkyl chain such as heptanethiol (HT, C7) show minimal changes in the C-H stretching vibrations while interacting with the lipid monolayer. These observations could be attributed to the perturbation of the lipid chain due to hydrophobic-hydrophobic interactions between the alkyl chain of thiol-capped GNPs and the hydrophobic group of the lipid membrane or simply by the adsorption of GNPs at the interface without disrupting the monolayer structure. However, with increasing the chain length of thiol-capped GNPs from decanethiol (DDT, C10) to octadecanethiol (ODT, C18), the extent of spectral change in the C-H stretching vibration is increased. The controlled experiment performed with the deuterated lipids conforms that the changes observed in the C-H stretching vibration after adding HT (C7) GNPs are only because of their presence in the surface without altering the monolayer structure. However, in the case of DT (C10) and DDT (C12) GNPs, the strong hydrophobic interactions between the monolayer and the alkyl chain of the thiol-capped GNPs result in the increased orientational order of the monolayer. Moreover, in the case of ODT (C18) GNPs, the very long alkyl chain induces pronounced perturbations in the monolayer structure with net disordering of the monolayer. These observations are further supported by the spectral changes observed in the O-H vibration of the interfacial water molecules. Our findings reveal the crucial role of the hydrophobic nature of GNPs in influencing the interface. Understanding these effects is crucial for drug delivery applications and improving the stability and effectiveness of lipid-based systems.

A New Structural Motif in Aggregation of Methylalumoxanes: Non-Hydrolytic Route by the Alkylation of Dicarboxylic Acids.

Alumoxanes are typically produced via controlled hydrolysis of short-chain alkyl aluminium compounds which leads to oligomeric species that are usually difficult to obtain in crystalline form. Simultaneously, various alternative non-hydrolytic approaches to alumoxanes have also been used. In this work, we report on a new methylalumoxane scaffold derived from the alkylation of a series of dicarboxylic acids: itaconic acid (HO2CCH2C(=CH2)CO2H), succinic acid (HO2CCH2CH2CO2H) and homophthalic acid (HO2CCH2C6H4CO2H). The reactions of AlMe3 with a selected dicarboxylic acid in the molar ratio 4 : 1 conducted at elevated temperature occur with double methylation of each carboxylic group and provide to the formation of a new methylalumoxane aggregate, Me10Al6O4, flanked by methylaluminium diolate units. We also aimed to obtain dialkylaluminium derivatives of dicarboxylic acids by the controlled reaction of the appropriate acid with AlMe3 in the 1 : 2 stoichiometry. While the synthesis of organoaluminium derivatives of flexible aliphatic dicarboxylic acids (itaconic and succinic acids) is challenging due to their insolubility, the related homophtalate compound readily forms a molecular tetranuclear cluster, [([(O2CCH2C6H4CO2)(μ-AlMe2)2]2. The molecular and crystal structures of the resulting compounds were determined via NMR spectroscopic analysis and single crystal X-ray diffraction crystallography.

ZDDP Tribofilm Formation and Removal

While ZDDP tribofilm formation has been widely studied, the mechanism of ZDDP tribofilm removal during rubbing is still unclear. The study employs a ball on disc tribometer to monitor ZDDP tribofilm development in rolling-sliding, mixed lubrication conditions. It is found that when ZDDP tribofilms are formed very rapidly, as is the case with short alkyl chain, secondary ZDDPs, a large proportion of the initially-formed tribofilm is suddenly lost during rubbing. By contrast, the tribofilms that form more slowly from primary ZDDPs and longer chain secondaries are not partially lost during rubbing. XPS analysis showed that a rapidly-formed tribofilm before its partial removal has a very small Zn/O ratio, and a high BO/NBO. This suggests that such tribofilm contains a significant proportion of ultraphosphate, which is likely to have a relatively weak structure due to lack of stabilising cations. This may result in the tribofilm being partially removed when it reaches a certain thickness. By comparison, the remaining tribofilm, and also tribofilms that form slowly, have high Zn/O and low BO/NBO. This suggests that they consist of short chain polyphosphates and are thus stronger and more durable.Graphical

Synthesis and Antibacterial Properties of Novel Quaternary Ammonium Lignins.

The ongoing demand for effective antimicrobial materials persists, and lignin emerges as a promising natural antibacterial material with renewable properties. The adaptability of lignin to various chemical modifications offers avenues to enhance its antimicrobial activity. Here, we employed chloromethylation and subsequent functionalization with variable tertiary N-alkyl dimethyl amines to produce C6-C18 quaternary ammonium lignins (QALs) from hardwood (aspen), softwood (pine), and grass (barley straw). Successful synthesis of QALs was confirmed through NMR and FTIR analysis results along with an increase in the surface ζ-potential. Antibacterial activity of QALs against clinical strains of Klebsiella pneumoniae and methicillin-resistant Staphylococcus aureus was assessed using minimal bactericidal concentration (MBC) assay and agar growth inhibition zone (ZOI) test. The antibacterial activity of QALs was found to be higher than that of the unmodified lignins. QALs with longer alkyl chains demonstrated an MBC of 0.012 mg/L against K. pneumoniae already after 1 h of exposure with similar effect size reached after 24 h for S. aureus. For all the lignins, an increase in alkyl chain length resulted in an increase in their bactericidal activity. MBC values of C14-C18 QALs were consistently lower than the MBC values of QALs with shorter alkyl chains. Besides the alkyl chain length, MBC values of barley and pine QALs were negatively correlated with the surface ζ-potential. While alkyl chain length was one of the key properties affecting the MBC values in a liquid-based test, the agar-based ZOI test demonstrated an antibacterial optimum of QALs at C12-C14, likely due to limited diffusion of QALs with longer alkyl chains in a semisolid medium.

Design and mediated hydrogen bonding strength of Poly(styrene-alt- N–(ethyl–4–hydroxyphenyl)maleimide) copolymer to enhance miscibility with hydrogen bonded acceptor homopolymers

In this study, the monomer N–(ethyl–4–hydroxyphenyl)maleimide (TyHPMI) was synthesized from tyramine and maleic anhydride. Subsequently, free radical copolymerization was used to prepare the poly(S–alt–TyHPMI) alternating copolymer by reacting TyHPMI with styrene. We confirmed the chemical structure using Fourier transform infrared (FTIR), 1H and 13C nuclear magnetic resonance (NMR). The sequence distribution of the poly(S–alt–TyHPMI) alternating copolymer was analyzed using mass–analyzed laser desorption ionization/time–of–flight (MALDI–TOF) mass spectrometry. Differential scanning calorimetry (DSC) measurements showed a single glass transition temperature (Tg) across various weight fractions of binary blended systems containing strong hydrogen–bonded acceptors, such as poly(S–alt–TyHPMI)/poly(4–vinyl pyridine) (P4VP) and poly(vinyl pyrrolidone) PVP, implying full miscibility. The Tg values predicted by kwei equation for the poly(S–alt–TyHPMI)/P4VP and poly(S–alt–TyHPMI)/PVP blends show a positive deviation from linearity. This deviation is due to the short alkyl chain reinforcing the addition of acidic TyHPMI units, which enhances intermolecular hydrogen bonding between the pyridyl or C=O groups and the OH units of the TyHPMI segment. As a result, FTIR spectral analyses indicate that the intermolecular hydrogen bonding between pyridyl and C=O groups is stronger in the poly(S–alt–TyHPMI) copolymer compared to the poly(S–alt–HPMI) copolymer. This is supported by the larger ratio of the inter/self-association equilibrium constant (KA/KB) value.

Systematic Investigations of Surface Oxygen Functional Groups on Spherical Hard Carbon for Sodium-Ion Batteries

The surface activity of hard carbons and its effect on the formation of a stable solid electrolyte interface (SEI) in sodium ion batteries has gained significant interest in the scientific community over the last years. The surface of hard carbons thus plays a pivotal role within the cell, as it constitutes the interface between the bulk material and the electrolyte. Following pyrolysis of the carbon-rich precursor at high temperatures, various oxygen functional groups (OFGs) and defects, such as five- or seven-membered rings, are present on the surface of the resulting hard carbons. The influence of OFGs on the surface is however controversially discussed. On the one hand, irreversible reactions of sodium ions with OFGs lower the initial coulombic efficiency (ICE), which leads to a decreased energy density. On the other hand, OFGs may also serve as nucleation sites for the SEI leading to a more conductive interfacial phase for sodium ions. Although many approaches of additional oxygen functionalization on the surface of hard carbons have already been reported, they mostly employ harsh reaction conditions disregarding the morphological impact on the carbon surface.In our studies, oxo-functionalized polycyclic aromatic hydrocarbons (PAHs) are adsorbed on the surface to serve as model OFGs on surface oxygen deficient hard carbons. The versatility of functionalized pyrenes in combination with nondestructive adsorption enables independent investigations on the oxygen functionalization of the hard carbon surface. In the first step, native surface oxygen groups are cleaved from the pristine hard carbon through a high-temperature post-treatment in hydrogen atmosphere. Afterwards, selective re-introduction of surface OFGs is achieved through adsorption of oxo-functionalized pyrene derivatives such as 1-hydroxypyrene or 1-pyrenecarboxylic acid to simulate hydroxy or carboxylic surface functionalities. Additionally, various spatially configurations of surface OFGs can be mimicked by elongating the distance between the oxygen functionality and the pyrene backbone through a short alkyl chain (e.g. 1-pyrenebutyric acid).Our systematic approach of selectively re-introducing surface OFGs allows the discrimination between different surface OFGs and their influence on the SEI. The surface of our modified hard carbons is characterized by X-Ray photoelectron spectroscopy (XPS) and Raman spectroscopy to evaluate the oxygen content and determine the defect concentration. The electrochemical performance is assessed by rate performance tests and cyclic voltammetry in three-electrode half-cells with sodium metal as counter and reference electrode. Initial findings validate the correlation between surface oxygen functionalization determined by XPS and the electrochemical formation potential of the SEI during the first cycle. After high-temperature treatment in a hydrogen atmosphere, the surface oxygen content decreases from ~5% to 2%, leading to a significant lowering of the plateau capacity. Simultaneously, the ICE decreases from 79% to 55%. Cyclic voltammetry of deoxygenated hard carbon reveals that the SEI formation potential is shifted from ~1.0 V vs. Na towards lower potentials of ~0.3 V vs. Na indicating that different decomposition products are formed. Furthermore, rate performance is substantially deteriorated by the development of a modified SEI. Ex-situ XPS of cycled electrodes and electrochemical impedance spectroscopy are used to identify differences in the SEI composition and link them to the electrochemical performance of our spherical hard carbons.Figure: 1-Pyrenebutyric acid adsorbed on the surface of hard carbon highlighting the different possible spatially orientations of the oxygen functional group. Figure 1

Bushy-Tailed QACs: The Development of Multicationic Quaternary Ammonium Compounds with a High Degree of Alkyl Chain Substitution.

Quaternary ammonium compounds have served as a first line of protection for human health as surface disinfectants and sanitizers for nearly a century. However, increasing levels of bacterial resistance have spurred the development of novel QAC architectures. In light of the observed reduction in eukaryotic cell toxicity when the alkyl chains on QACs are shorter in nature (≤10 C), we prepared 47 QAC architectures that bear multiple short alkyl chains appended to up to three cationic groups, thus rendering them "bushy-tailed" multiQACs. Antibacterial activity was strong (often ~1-4 μM) in a varied set of bushy-tailed architectures, though observed therapeutic indices were not significantly improved over QAC structures bearing fewer and longer alkyl chains.

Bioisosteres at C9 of 2-Deoxy-2,3-didehydro-N-acetyl Neuraminic Acid Identify Selective Inhibitors of NEU3.

Human neuraminidases play critical roles in many physiological and pathological processes. Humans have four isoenzymes of NEU, making selective inhibitors important tools to investigate the function of individual isoenzymes. A typical scaffold for NEU inhibitors is 2-deoxy-2,3-didehydro-N-acetylneuraminic acid (DANA) where C9 modifications can be critical for potency and selectivity against human NEU. To design improved DANA analogues, we generated a library of compounds with either a short alkyl chain or a biphenyl substituent linked to the C9 position through one of six amide bioisosteres. Bioisostere linkers included triazole, urea, thiourea, carbamate, thiocarbamate, and sulfonamide groups. Within this library, we identified a C9 biphenyl carbamate derivative (963) that showed high selectivity and potency for NEU3 (Ki = 0.12 ± 0.01 μM). In contrast, NEU1 and NEU4 isoenzymes preferred amide and triazole linkers, respectively. Finally, analogues with urea, sulfonamide, and amide linkers showed enhanced inhibitory activity for a bacterial NEU, NanI from Clostridium perfringens.

Controlled release characteristics of alkyl gallates and gallic acid from β-cyclodextrin inclusion complexes of alkyl gallates

The freeze-drying approach was used to create inclusion complexes utilizing alkyl gallates and β-cyclodextrin, namely dodecyl gallate, octyl gallate, butyl gallate, and ethyl gallate, which are exemplary examples of phenolic esters. The everted-rat-gut-sac model demonstrated that the inclusion complexes released alkyl gallates, which were subsequently hydrolyzed to generate free gallic acid, as evidenced by HPLC-UV analysis. Both gallic acid and short-chain alkyl gallates were capable of permeating the small intestinal membrane. The transport rate of gallic acid (or alkyl gallates) exhibited an initial rise followed by a drop when the carbon-chain lengths varied. The inclusion complex groups exhibited a superior sustained-release effect compared to the comparable alkyl gallates groups, thus possibly leading to higher bioavailability and stronger bioactivity. Moreover, altering the length of the carbon chain will allow for the effortless achievement of regulated release of phenolic compounds and short-chain phenolic esters from such β-cyclodextrin inclusion complexes.

CORROSION INHIBITION OF MILD STEEL BY COUMARATE-BASED IONIC LIQUIDS AND COATINGS.

The use of ionic liquids (ILs) as corrosion inhibitors gainedattention due to their attractive properties such as high inhibition efficiency and ability to absorb onto metal surfaces. In this work, six ILs, based on the coumarate anion combined with different nitrogen cations (triethylammonium, pyrrolidinium and imidazolium with short and long alkyl chain attached to the nitrogen atom)have been synthesized and evaluated as inhibitors for steel. The anticorrosion properties of these ILs in solutionwere investigated electrochemically and the metal surface was analyzed by SEM. Moreover, the IL prepared from the coumarate anion and N-dimethyl-N-tetradecyl ammonium ([DTA]Cou) was incorporated into an UV-coating formulation as an additive and by designing a similar ionic monomer which covalently links to theformulation. Impedance spectroscopy during 11 days of exposure to a solution of NaCl 0,01M, confirmed the high performance of the inhibitor in both solution and whenincorporated into a coating. The synthesized ILs present efficiencies in solution exceeding 70%, in particular the ILs [DTA]Cou and tetradecyl imidazolium coumarate ([C14Im]Cou) showed efficiencies of 88% and 91% respectively. The obtained inhibitors showed interesting anticorrosion behaviors and demonstrated how different cations and an increase in the chain length affect the inhibition properties.

CBD Versus CBDP: Comparing In Vitro Receptor-Binding Activities.

Phytocannabinoids with seven-carbon alkyl chains (phorols) have gained a lot of attention, as they are commonly believed to be more potent versions of typical cannabinoids with shorter alkyl chains. At the time of this article, cannabidiphorol (CBDP) and tetrahydrocannabiphorol (THCP) can both be purchased in the North American market, even though their biological activities are nearly unknown. To investigate their relative potency, we conducted in vitro receptor-binding experiments with CBDP (cannabinoid CB1/CB2 receptor antagonism, serotonin 5HT-1A agonism, dopamine D2S (short form) agonism, and mu-opioid negative allosteric modulation) and compared the observed activity with that of CBD. To our knowledge, this is the first publication to investigate CBDP's receptor activity in vitro. A similar activity profile was observed for both CBD and CBDP, with the only notable difference at the CB2 receptor. Contrary to common expectations, CBD was found to be a slightly more potent CB2 antagonist than CBDP (p < 0.05). At the highest tested concentration, CBD demonstrated antagonist activity with a 33% maximum response of SR144528 (selective CB2 antagonist/inverse agonist). CBDP at the same concentration produced a weaker antagonist activity. A radioligand binding assay revealed that among cannabinoid and serotonin receptors, CB2 is likely the main biological target of CBDP. However, both CBD and CBDP were found to be significantly less potent than SR144528. The interaction of CBDP with the mu-opioid receptor (MOR) produced unexpected results. Although the cannabidiol family is considered to be a set of negative allosteric modulators (NAMs) of opioid receptors, we observed a significant increase in met-enkephalin-induced mu-opioid internalization when cells were incubated with 3 µM of CBDP and 1 µM met-enkephalin, a type of activity expected from positive allosteric modulators (PAMs). To provide a structural explanation for the observed PAM effect, we conducted molecular docking simulations. These simulations revealed the co-binding potential of CBDP (or CBD) and met-enkephalin to the MOR.

Screening of ionic liquids for the solubility enhancement of quinine using COSMO-RS

Quinine has traditionally been used in medicine to treat parasitic disease malaria due to its antimalarial activities. It is sparingly soluble in water and highly soluble in organic solvents. However, these solvents are not environmentally friendly, so greener solvents need to be explored and designed. Ionic liquids (ILs) were successfully observed to be greener and capable of dissolving biologically active compounds. However, finding a potential IL from millions of possible IL combinations is challenging. This work utilizes the conductor-like screening model for real solvents (COSMO-RS) to address this issue. This study aims to determine the dissolution behavior of quinine in ILs employing the COSMO-RS. A total of 540 IL combinations of 9 cations and 60 anions were investigated. The efficacy of each IL was evaluated by predicting the activity coefficients at infinite dilution, solvation-free energy, selectivity, capacity, and performance index (P.I.). This study reveals that ILs with shorter alkyl chains, polar and non-aromatic characteristics, and smaller anions are advantageous for the solubility enhancement ofquinine.The most effective ILs, choline acetate, choline glycinate, and choline threoninate, displayed the highest selectivity, capacity, P.I., and lowest activity coefficient and solvation-free energies. The findings of the current study unlock key insights into the solubility behaviour of quinine in an aqueous solution employing ILs.

Hierarchical self-constructed molecular layers of small bifunctional molecules with strong molecular dipole moments for improvement of quantum efficiency in inorganic quantum dots

Hierarchically structured self-assembled molecular layers are functionally versatile and structurally tunable, which are nanoscale molecular building blocks with a wide range of applications from biosensing systems to optoelectronic devices. Herein, we present a facile and effective strategy to fabricate hierarchical self-constructed molecular layers comprising small bifunctional molecules with strong molecular dipole moments for improvement of quantum efficiency in inorganic quantum dots (QDs) by using the cooperative interfacial self-assembly of hydrophilic bifunctional molecules on the polar electrode surface. The spontaneous construction of nanostructured molecular layers with different molecular dipole moments was simply achieved through solution-dipping and in situ interfacial self-organization of 3-mercaptopropionic acid or 1-propanethiol molecules on the surface of indium tin oxide (ITO) anode. It is experimentally revealed that these functional molecules formed uniform and ultrathin self-constructed molecular nanolayers on the ITO surface via covalent bonding, where bifunctional 3-mercaptopropionic acid molecules induced a polar molecular surface of thiol groups with strong dipole moments, whereas 1-propanethiol molecules formed a relatively hydrophobic surface of short alkyl chains with weak dipole moments. In addition, the nanoscale ultrathin nature of these molecular layers afforded high visible light transmittance comparable to that of pristine ITO substrate. The electro-optical properties of the QD cells revealed that hierarchical self-constructed molecular nanolayer with strong molecular dipole moments exhibited superior current and luminescent properties with a 162% improvement in external quantum efficiency relative to those of a conventional QD device without molecular layer. Furthermore, the self-assembled molecular nanolayer of 3-mercaptopropionic acid exhibited a higher luminescent efficiency than 1-propanethiol-based nanolayer owing to the increased hole mobility of thiol-based molecular layer with strong dipole moments.