Short Peptide Segments Research Articles

Computational design of cyclic peptides to inhibit protein-peptide interactions

Many protein-protein interactions result from the binding of one folded protein with one short peptide segment, such as complexes formed by SH3 or PDZ domains. These transient protein-peptide interactions are notably involved in cellular signaling pathways and generally have low affinities, which opens the possibility to design competitive inhibitors of these complexes. We present and assess here our computational approach, called Des3PI, to design de novo cyclic peptides with potential high affinity for protein surfaces involved in interactions with peptide segments. The results were not conclusive for two receptors, the αVβ3 integrin and the CXCR4 chemokine receptor, but were promising in the case of SH3 and PDZ domains: For the former, Des3PI was able to find at least one cyclic sequence with six hotspots that binds a SH3 domain with a better theoretical affinity to the known proline-rich RLP2 peptide. For the latter, Des3PI could identify at least four cyclic sequences with four or five hotspots that have lower binding free energies computed by the MM-PBSA method than the reference peptide GKAP.

Probing the Interactions of LRP1 Ectodomain-Derived Peptides with Fibrillar Tau Protein and Its Impact on Cellular Internalization

Cellular internalization and the spreading of misfolded tau have become increasingly important for elucidating the mechanism of Tau pathology involved in Alzheimer’s disease (AD). The low-density lipoprotein-related receptor 1 (LRP1) has been implicated in the internalization of fibrillar tau. In this work, we utilized homology modeling to model the Cluster 2 domain of LRP1 and determined that a 23-amino-acid sequence is involved in binding to paired helical filaments (PHF) of Tau. Fourteen short peptide segments derived from this ectodomain region were then designed and docked with PHF Tau. Molecular dynamics studies of the optimal peptides bound to PHF Tau demonstrated that the peptides formed critical contacts through Lys and Gln residues with Tau. Based on the computational results, flow cytometry, AFM, SPR analysis and CD studies were conducted to examine binding and cellular internalization. The results showed that the peptide sequence TauRP (1–14) (DNSDEENCES) was not only associated with fibrillar Tau but was also able to mitigate its cellular internalization in LRP1-expressed HEK-293 cells. Preliminary docking studies with Aβ (1–42) revealed that the peptides also bound to Aβ (1–42). While this study focused on the CCR2 domain of LRP1 to design peptide sequences to mitigate Tau internalization, the work can be extended to other domains of the LRP1 receptor or other receptors to examine if the cellular internalization of fibrillar Tau can be deterred. These findings show that short peptides derived from the LRP1 receptor can alter the internalization of its ligands.

Molecular determinants of TRAF6 binding specificity suggest that native interaction partners are not optimized for affinity.

TRAF6 is an adaptor protein involved in signaling pathways that are essential for development and the immune system. It participates in many protein–protein interactions, some of which are mediated by the C‐terminal MATH domain, which binds to short peptide segments containing the motif PxExx[FYWHDE], where x is any amino acid. Blocking MATH domain interactions is associated with favorable effects in various disease models. To better define TRAF6 MATH domain binding preferences, we screened a combinatorial library using bacterial cell‐surface peptide display. We identified 236 of the best TRAF6‐interacting peptides and a set of 1,200 peptides that match the sequence PxE but do not bind TRAF6 MATH. The peptides that were most enriched in the screen bound TRAF6 tighter than previously measured native peptides. To better understand the structural basis for TRAF6 interaction preferences, we built all‐atom structural models of the MATH domain in complex with high‐affinity binders and nonbinders identified in the screen. We identified favorable interactions for motif features in binders as well as negative design elements distributed across the motif that can disfavor or preclude binding. Searching the human proteome revealed that the most biologically relevant TRAF6 motif matches occupy a different sequence space from the best hits discovered in combinatorial library screening, suggesting that native interactions are not optimized for affinity. Our experimentally determined binding preferences and structural models support the design of peptide‐based interaction inhibitors with higher affinities than endogenous TRAF6 ligands.

Functional spectrum and specificity of mitochondrial ferredoxins FDX1 and FDX2.

Ferredoxins comprise a large family of iron-sulfur (Fe-S) proteins that shuttle electrons in diverse biological processes. Human mitochondria contain two isoforms of [2Fe-2S] ferredoxins, FDX1 (aka adrenodoxin) and FDX2, with known functions in cytochrome P450-dependent steroid transformations and Fe-S protein biogenesis. Here, we show that only FDX2, but not FDX1, is involved in Fe-S protein maturation. Vice versa, FDX1 is specific not only for steroidogenesis, but also for heme a and lipoyl cofactor biosyntheses. In the latter pathway, FDX1 provides electrons to kickstart the radical chain reaction catalyzed by lipoyl synthase. We also identified lipoylation as a target of the toxic antitumor copper ionophore elesclomol. Finally, the striking target specificity of each ferredoxin was assigned to small conserved sequence motifs. Swapping these motifs changed the target specificity of these electron donors. Together, our findings identify new biochemical tasks of mitochondrial ferredoxins and provide structural insights into their functional specificity.

Construction of NIR etchable nanoparticles via co-assembly strategy for appointed delivery

NIR etchable nanoparticles were prepared from NIR-triggered molecule (ASBBCM) and short anticancer peptide segment. After NIR irradiation, the surface of nanoparticles became rough according to the TEM observation due to ASBBCM degradation. Since the nanoparticles were gradually destroyed from the surface, functional YSV peptides were released simultaneously. The release rates were closely related to the degree of photo-etching. Cytotoxicity and cell internalization experiments of nanoparticles at different irradiation conditions were carried by MTT, FCM and IFM. In vivo evaluation also proved that the photo-etchable nanoparticles exhibited excellent effectiveness in directed release in the organism. Compared to conventional drug delivery platforms, this research provides the opportunity to develop smarter self-assembled bio-small molecules for precise therapeutic bio-nanomaterials.

Short Linear Motifs Orchestrate Functioning of Human Proteins during Embryonic Development, Redox Regulation, and Cancer.

Short linear motifs (SLiMs) are evolutionarily conserved functional modules of proteins that represent amino acid stretches composed of 3 to 10 residues. The biological activities of two short peptide segments of human alpha-fetoprotein (AFP), a major embryo-specific and cancer-related protein, have been confirmed experimentally. This is a heptapeptide segment LDSYQCT in domain I designated as AFP14–20 and a nonapeptide segment EMTPVNPGV in domain III designated as GIP-9. In our work, we searched the UniprotKB database for human proteins that contain SLiMs with sequence similarity to the both segments of human AFP and undertook gene ontology (GO)-based functional categorization of retrieved proteins. Gene set enrichment analysis included GO terms for biological process, molecular function, metabolic pathway, KEGG pathway, and protein–protein interaction (PPI) categories. We identified the SLiMs of interest in a variety of non-homologous proteins involved in multiple cellular processes underlying embryonic development, cancer progression, and, unexpectedly, the regulation of redox homeostasis. These included transcription factors, cell adhesion proteins, ubiquitin-activating and conjugating enzymes, cell signaling proteins, and oxidoreductase enzymes. They function by regulating cell proliferation and differentiation, cell cycle, DNA replication/repair/recombination, metabolism, immune/inflammatory response, and apoptosis. In addition to the retrieved genes, new interacting genes were identified. Our data support the hypothesis that conserved SLiMs are incorporated into non-homologous proteins to serve as functional blocks for their orchestrated functioning.

Water-Based Dynamic Depsipeptide Chemistry: Building Block Recycling and Oligomer Distribution Control Using Hydration-Dehydration Cycles.

The high kinetic barrier to amide bond formation has historically placed narrow constraints on its utility in reversible chemistry applications. Slow kinetics has limited the use of amides for the generation of diverse combinatorial libraries and selection of target molecules. Current strategies for peptide-based dynamic chemistries require the use of nonpolar co-solvents or catalysts or the incorporation of functional groups that facilitate dynamic chemistry between peptides. In light of these limitations, we explored the use of depsipeptides: biorelevant copolymers of amino and hydroxy acids that would circumvent the challenges associated with dynamic peptide chemistry. Here, we describe a model system of N-(α-hydroxyacyl)-amino acid building blocks that reversibly polymerize to form depsipeptides when subjected to two-step evaporation–rehydration cycling under moderate conditions. The hydroxyl groups of these units allow for dynamic ester chemistry between short peptide segments through unmodified carboxyl termini. Selective recycling of building blocks is achieved by exploiting the differential hydrolytic lifetimes of depsipeptide amide and ester bonds, which we show are controllable by adjusting the solution pH, temperature, and time as well as the building blocks’ side chains. We demonstrate that the polymerization and breakdown of the depsipeptides are facilitated by cyclic morpholinedione intermediates, and further show how structural properties dictate half-lives and product oligomer distributions using multifunctional building blocks. These results establish a cyclic mode of ester-based reversible depsipeptide formation that temporally separates the polymerization and depolymerization steps for the building blocks and may have implications for prebiotic polymer chemical evolution.

Abstract 119: Into The Wormhole: Understanding SR-B1’s Cholesterol Transport Functions Through Structural Studies

Scavenger receptor Class B type 1 (SR-B1) is a glycosylated integral membrane protein that serves as the primary receptor for high density lipoprotein (HDL) and plays a central role in the reverse cholesterol transport pathway (RCT). In RCT, HDL removes cholesterol within atherosclerotic plaques and delivers it to the liver for excretion. HDL-cholesterol is delivered into hepatocytes through interaction with SR-B1, highlighting the need to improve our understanding of SR-B1 structure-function relationships to effectively lower plasma cholesterol levels and cardiovascular disease risk. Currently, structural information about SR-B1 remains limited to a structure of short transmembrane-spanning peptide segment, homology models, and transient transfection studies in cultured cells. Towards our long-term goal of resolving a full-length structure of human SR-B1, we have expressed and purified full-length human SR-B1 from an Sf9 insect cell baculoviral infection system. To verify function, human full-length SR-B1 expressed in plated Sf9 cells displayed a significant increase in DiI-HDL binding and DiI-lipid uptake compared to empty vector controls. Using PFO-PAGE, we demonstrated that SR-B1 forms dimers and higher order oligomers in Sf9 cells. After functional verification, we successfully incorporated purified protein into detergent micelles. Thermal shift assays revealed purified SR-B1 remained stable over a 6-week period. Purified SR-B1 also maintained the ability to bind to apolipoprotein A-I (the main protein component of HDL) and holoparticle HDL with high affinity (K D = 42.77 ± 7.15 μg/mL) by microscale thermophoresis (MST). Additionally, SR-B1 was able to bind oxidized low density lipoprotein (oxLDL). Further, while glycosylation remains important for SR-B1 expression, we are the first to demonstrate by MST that SR-B1’s glycosylation status did not impact HDL binding affinity (K D of 42.77 ± 7.15 μg/mL for glycosylated vs. 41.25 ± 4.92 μg/mL for unglycosylated SR-B1). Availability of functional purified human SR-B1 is a critical step towards a high-resolution structure and these studies lay the foundation for understanding the dynamics of SR-B1-mediated cholesterol transport and novel ways to modulate cardiovascular disease risk.

Abstract 206: Into The Wormhole: Understanding SR-B1’s Cholesterol Transport Functions Through Structural Studies

Scavenger receptor Class B type 1 (SR-B1) is a glycosylated integral membrane protein that serves as the primary receptor for high density lipoprotein (HDL) and plays a central role in the reverse cholesterol transport pathway (RCT). In RCT, HDL removes cholesterol within atherosclerotic plaques and delivers it to the liver for excretion. HDL-cholesterol is delivered into hepatocytes through interaction with SR-B1, highlighting the need to improve our understanding of SR-B1 structure-function relationships to effectively lower plasma cholesterol levels and cardiovascular disease risk. Currently, structural information about SR-B1 remains limited to a structure of short transmembrane-spanning peptide segment, homology models, and transient transfection studies in cultured cells. Towards our long-term goal of resolving a full-length structure of human SR-B1, we have expressed and purified full-length human SR-B1 from an Sf9 insect cell baculoviral infection system. To verify function, human full-length SR-B1 expressed in plated Sf9 cells displayed a significant increase in DiI-HDL binding and DiI-lipid uptake compared to empty vector controls. Using PFO-PAGE, we demonstrated that SR-B1 forms dimers and higher order oligomers in Sf9 cells. After functional verification, we successfully incorporated purified protein into detergent micelles. Thermal shift assays revealed purified SR-B1 remained stable over a 6-week period. Purified SR-B1 also maintained the ability to bind to apolipoprotein A-I (the main protein component of HDL) and holoparticle HDL with high affinity (K D = 42.77 ± 7.15 μg/mL) by microscale thermophoresis (MST). Additionally, SR-B1 was able to bind oxidized low density lipoprotein (oxLDL). Further, while glycosylation remains important for SR-B1 expression, we are the first to demonstrate by MST that SR-B1’s glycosylation status did not impact HDL binding affinity (K D of 42.77 ± 7.15 μg/mL for glycosylated vs. 41.25 ± 4.92 μg/mL for unglycosylated SR-B1). Availability of functional purified human SR-B1 is a critical step towards a high-resolution structure and these studies lay the foundation for understanding the dynamics of SR-B1-mediated cholesterol transport and novel ways to modulate cardiovascular disease risk.

Spermine-Conjugated Short Proline-Rich Lipopeptides as Broad-Spectrum Intracellular Targeting Antibacterial Agents.

Toward the design of new proline-rich peptidomimetics, a short peptide segment, present in several proline-rich antimicrobial peptides (AMPs), was selected. Fatty acids of varying lengths and spermine were conjugated at the N- and C-terminals of the peptide, respectively. Spermine-conjugated lipopeptides, C10-PR-Spn and C12-PR-Spn, exhibited minimum inhibitory concentrations within 1.5-6.2 μM against the tested pathogens including resistant bacteria and insignificant hemolytic activity against human red blood cells up to 100 μM concentrations and demonstrated resistance against trypsin digestion. C10-PR-Spn and C12-PR-Spn showed synergistic antimicrobial activity against multidrug-resistant methicillin-resistant Staphylococcus aureus with several tested antibiotics. These lipopeptides did not permeabilize bacterial membrane-mimetic lipid vesicles or damage the Escherichia coli membrane like the nonmembrane-lytic AMP, buforin-II. The results suggested that C10-PR-Spn and C12-PR-Spn could interact with the 70S ribosome of E. coli and inhibit its protein synthesis. C10-PR-Spn and C12-PR-Spn demonstrated superior clearance of bacteria from the spleen, liver, and kidneys of mice, infected with S. aureus ATCC 25923 compared to levofloxacin.

Activating the p53 anti-cancer pathway by targeting the MDM2/MDMX dimer interface with short peptide segments: a computational peptide design experiment

Systematic mutation of the I485 and I489 residues of the KEIQLVIKVFI489A peptide leads to 14 mutant peptides that show at least three-fold preferential binding to the MDM2/MDMX interface (ΔΔG ∼ −3.00 kcal mol−1) lower than the KEIQLVIKVFI489A peptide (ΔΔG = −1.02 kcal mol−1).

Disruption of 3CLpro protease self-association by short peptides as a potential route to broad spectrum coronavirus inhibitors

Coronaviruses have posed a persistent threat to human health over the last two decades. Despite the accumulated knowledge about coronavirus-related pathogens, development of an effective treatment for its new variant COVID-19 is highly challenging. For the highly-conserved and main coronavirus protease 3CLpro, dimerization is known to be essential for its catalytic activity and thereby for virus proliferation. Here, we assess the potential of short peptide segments to disrupt dimerization of the 3CLpro protease as a route to block COVID-19 proliferation. Based on the X-ray structure of the 3CLpro dimer, we identified the SPSGVY126QCAMRP dodecapeptide segment as overlapping the hotspot regions on the 3CLpro dimer interface. Using computational blind docking of the peptide to the 3CLpro monomer, we found that the SPSGVY126QCAMRP peptide has favourable thermodynamic binding (ΔG= -5.93 kcal/mol) to the hotspot regions at the 3CLpro dimer interface. Importantly, the peptide was also found to preferentially bind to the hotspot regions compared to other potential binding sites lying away from the dimer interface (ΔΔG=-1.31 kcal/mol). Docking of peptides corresponding to systematic mutation of the V125 and Y126 residues led to the identification of seven peptides, SPSGHAQCAMRP, SPSGVTQCAMRP, SPSGKPQCAMRP, SPSGATQCAMRP, SPSGWLQCAMRP, SPSGAPQCAMRP and SPSGHPQCAMRP, that outperform the wild-type SPSGVY126QCAMRP peptide in terms of preferential binding to the 3CLpro dimer interface. These peptides have the potential to disrupt 3CLpro dimerization and therefore could provide lead structures for the development of broad spectrum COVID-19 inhibitors. Communicated by Ramaswamy H. Sarma

Current Understanding of the Structure, Stability and Dynamic Properties of Amyloid Fibrils.

Amyloid fibrils are supramolecular protein assemblies represented by a cross-β structure and fibrous morphology, whose structural architecture has been previously investigated. While amyloid fibrils are basically a main-chain-dominated structure consisting of a backbone of hydrogen bonds, side-chain interactions also play an important role in determining their detailed structures and physicochemical properties. In amyloid fibrils comprising short peptide segments, a steric zipper where a pair of β-sheets with side chains interdigitate tightly is found as a fundamental motif. In amyloid fibrils comprising longer polypeptides, each polypeptide chain folds into a planar structure composed of several β-strands linked by turns or loops, and the steric zippers are formed locally to stabilize the structure. Multiple segments capable of forming steric zippers are contained within a single protein molecule in many cases, and polymorphism appears as a result of the diverse regions and counterparts of the steric zippers. Furthermore, the β-solenoid structure, where the polypeptide chain folds in a solenoid shape with side chains packed inside, is recognized as another important amyloid motif. While side-chain interactions are primarily achieved by non-polar residues in disease-related amyloid fibrils, the participation of hydrophilic and charged residues is prominent in functional amyloids, which often leads to spatiotemporally controlled fibrillation, high reversibility, and the formation of labile amyloids with kinked backbone topology. Achieving precise control of the side-chain interactions within amyloid structures will open up a new horizon for designing useful amyloid-based nanomaterials.

Binding mode of SARS-CoV-2 fusion peptide to human cellular membrane

Infection of human cells by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV2) relies on its binding to a specific receptor and subsequent fusion of the viral and host cell membranes. The fusion peptide (FP), a short peptide segment in the spike protein, plays a central role in the initial penetration of the virus into the host cell membrane, followed by the fusion of the two membranes. Here, we use an array of molecular dynamics simulations that take advantage of the highly mobile membrane mimetic model to investigate the interaction of the SARS-CoV2 FP with a lipid bilayer representing mammalian cellular membranes at an atomic level and to characterize the membrane-bound form of the peptide. Six independent systems were generated by changing the initial positioning and orientation of the FP with respect to the membrane, and each system was simulated in five independent replicas, each for 300 ns. In 73% of the simulations, the FP reaches a stable, membrane-bound configuration, in which the peptide deeply penetrated into the membrane. Clustering of the results reveals three major membrane-binding modes (binding modes 1–3), in which binding mode 1 populates over half of the data points. Taking into account the sequence conservation among the viral FPs and the results of mutagenesis studies establishing the role of specific residues in the helical portion of the FP in membrane association, the significant depth of penetration of the whole peptide, and the dense population of the respective cluster, we propose that the most deeply inserted membrane-bound form (binding mode 1) represents more closely the biologically relevant form. Analysis of FP-lipid interactions shows the involvement of specific residues, previously described as the “fusion-active core residues,” in membrane binding. Taken together, the results shed light on a key step involved in SARS-CoV2 infection, with potential implications in designing novel inhibitors.

Binding Mode of SARS-CoV2 Fusion Peptide to Human Cellular Membranes

Infection of human cells by the SARS-CoV2 relies on its binding to a specific receptor and subsequent fusion of the viral and the host cell membranes. The fusion peptide (FP), a short peptide segment in the spike protein, plays a central role in the initial penetration of the virus into the host cell membrane, followed by the fusion of the two membranes. Here, we use an extensive array of molecular dynamics (MD) simulations taking advantage of the Highly Mobile Membrane Mimetic (HMMM) model, to investigate the interaction of the SARS-CoV2 FP with a lipid bilayer representing human cellular membranes at an atomic level, and to characterize its membrane-bound form.

Rapid in silico Design of Potential Cyclic Peptide Binders Targeting Protein-Protein Interfaces.

Rational design of specific inhibitors of protein-protein interactions is desirable for drug design to control cellular signal transduction but also for studying protein-protein interaction networks. We have developed a rapid computational approach to rationally design cyclic peptides that potentially bind at desired regions of the interface of protein-protein complexes. The methodology is based on comparing the protein backbone structure of short peptide segments (epitopes) at the protein-protein interface with a collection of cyclic peptide backbone structures. A cyclic peptide that matches the backbone structure of the segment is used as a template for a binder by adapting the amino acid side chains to the side chains found in the target complex. For a small library of cyclic peptides with known high resolution structures we found for the majority (~82%) of 154 protein-protein complexes at least one very well fitting match for a cyclic peptide template to a protein-protein interface segment. The majority of the constructed protein-cyclic peptide complexes was very stable during Molecular Dynamics simulations and showed an interaction energy score that was typically more favorable compared to interaction scores of typical peptide-protein complexes. Our cPEPmatch approach could be a promising approach for rapid suggestion of cyclic peptide binders that could be tested experimentally and further improved by chemical modification.

Conformational heterogeneity of Savinase from NMR, HDX-MS and X-ray diffraction analysis.

BackgroundSeveral examples have emerged of enzymes where slow conformational changes are of key importance for function and where low populated conformations in the resting enzyme resemble the conformations of intermediate states in the catalytic process. Previous work on the subtilisin protease, Savinase, from Bacillus lentus by NMR spectroscopy suggested that this enzyme undergoes slow conformational dynamics around the substrate binding site. However, the functional importance of such dynamics is unknown.MethodsHere we have probed the conformational heterogeneity in Savinase by following the temperature dependent chemical shift changes. In addition, we have measured changes in the local stability of the enzyme when the inhibitor phenylmethylsulfonyl fluoride is bound using hydrogen-deuterium exchange mass spectrometry (HDX-MS). Finally, we have used X-ray crystallography to compare electron densities collected at cryogenic and ambient temperatures and searched for possible low populated alternative conformations in the crystals.ResultsThe NMR temperature titration shows that Savinase is most flexible around the active site, but no distinct alternative states could be identified. The HDX shows that modification of Savinase with inhibitor has very little impact on the stability of hydrogen bonds and solvent accessibility of the backbone. The most pronounced structural heterogeneities detected in the diffraction data are limited to alternative side-chain rotamers and a short peptide segment that has an alternative main-chain conformation in the crystal at cryo conditions. Collectively, our data show that there is very little structural heterogeneity in the resting state of Savinase and hence that Savinase does not rely on conformational selection to drive the catalytic process.

Discovery of a Small-Molecule-Dependent Photolytic Peptide.

We accidentally found that YM-53601, a known small-molecule inhibitor of squalene synthase (SQS), selectively depletes SQS from mammalian cells upon UV irradiation. Further analyses indicated that the photodepletion of SQS requires its short peptide segment located at the COOH terminus. Remarkably, when the 27 amino acid peptide was fused to green fluorescent protein or unrelated proteins at either the NH2 or COOH terminus, such fusion proteins were selectively depleted when the cells were treated with both YM-53601 and UV exposure. Product analysis and electron spin resonance experiments suggested that the UV irradiation promotes homolytic C-O bond cleavage of the aryl ether group in YM-53601. It is likely that the radical species generated from UV-activated YM-53601 abstract hydrogen atoms from the SQS peptide, leading to the photolysis of the entire protein. The pair of the SQS peptide and YM-53601 discovered in the present study paves the way for the design of a new small-molecule-controlled optogenetic tool.

Growth, Polymorphism, and Spatially Controlled Surface Immobilization of Biotinylated Variants of IAPP21-27 Fibrils.

The islet amyloid polypeptide (IAPP) is a regulatory peptide that can aggregate into fibrillar structures associated with type 2 diabetes. In this study, the IAPP21-27 segment was modified with a biotin linker at the N-terminus (Btn-GNNFGAIL) to immobilize peptide fibrils on streptavidin-coated surfaces. Key residues for fibril formation of the N-terminal biotinylated IAPP21-27 segment were identified by using an alanine scanning approach combined with molecular dynamics simulations, thioflavin T fluorescence measurements, and scanning electron microscopy. Significant contributions of phenylalanine (F23), leucine (L27), and isoleucine (I26) for the fibrillation of the short peptide segment were identified. The fibril morphologies of the peptide variants differed depending on their primary sequence, ranging from flexible and semiflexible to stiff and crystal-like structures. These insights could advance the design of new functional hybrid bionanomaterials and fibril-engineered surface coatings using short peptide segments. To validate this concept, the biotinylated fibrils were immobilized on streptavidin-coated surfaces under spatial control.

Self-binding peptides: Binding-upon-folding versus folding-upon-binding

Self-binding peptide (SBP) represents a novel biomolecular phenomenon spanning between folding and binding. It is a structurally independent, short peptide segment within a monomeric protein and fulfills biological function by dynamically binding to/unbinding from its target domain in the same monomer. Here, four representative SBP systems, including mouse proto-oncogene Vav, human retinoic acid receptor RARγ, fruit fly scaffold module INAD and crypto 14-3-3 protein Cp14b, are investigated systematically by using atomistic molecular dynamics (MD) simulations and post binding energetics analyses. The native bound structure, artificial unbound state and isolated peptide segment of SBP moieties in the four systems were constructed, analyzed and compared in detail. It is revealed that the SBP interaction with their targets is almost a binding phenomenon at single-molecule level, but presence of a polypeptide linker between the SBP and target can promote the binding efficiency since the linker restriction largely increases the probability of SBP–target encounters in a statistical physics point of view. In this respect, unlike classical peptide-mediated interactions where the intrinsically disordered peptides are folded into an ordered structure upon binding to their protein partners (folding-upon-binding), we herein propose SBPs as a new and reversed biological event that is naturally a folding phenomenon but exhibits a typical binding behavior (binding-upon-folding).