Shock Stage S3 Research Articles

Analysis of the daylight fireball of July 15, 2021, leading to a meteorite fall and find near Antonin, Poland, and a description of the recovered chondrite

AbstractWe present the description of an observation of a fireball recorded during the sunrise on July 15, 2021. Atmospheric trajectory, impact area, and heliocentric orbit were determined on the basis of three instrumental video records. The terminal part of the fireball was not instrumentally recorded due to clouds. Based on our computations, one meteorite was found in the predicted impact area by Polish searchers. The specimen was, soon after recovery, analyzed for the presence of short‐lived radionuclides and the measurement confirms a very fresh fall, coinciding with the time of the fireball event. The recovered meteorite, Antonin, is an unbrecciated L5 chondrite with shock stage S3, weathering grade W0, and bulk density of 3.42 g cm−3. Unusual for L chondrites, it contains assemblages composed of metal and two sulfides, troilite and mackinawite. We interpret these assemblages to have been formed as products of shock metamorphism and post‐shock annealing on the parent body. This suggests that the thermal and collisional history of the Antonin parent body was complex.

Investigation of the shocked Viñales ordinary chondrite (L6) meteorite fall – Implications for shock classification, fragmentation, and collision dynamics

The effects of collisions on the evolution of asteroids, ranging from local fracturing to brecciation or even to catastrophic disruption, depend primarily on the encounter velocities. Here we present a refined view of the mineralogy and texture of the recent fall Viñales, an L6 ordinary chondrite meteorite. It preserves features that require at least one energetic impact, including numerous shock melt veins of variable thickness. We report the identification of two high-pressure phases, majorite and albitic jadeite, limited to just one of these shock melt veins. Viñales is a moderately shocked sample, shock stage S4, that experienced a complex and spatially variable pressure-temperature-time history with a low (but non-zero) probability of preservation of high-pressure phases.

Measuring the shock stage of Itokawa and asteroid regolith grains by electron backscattered diffraction, optical petrography, and synchrotron X‐ray diffraction

AbstractOur goal was to devise a bridge between shock determinations of asteroid regolith grains by standard light optical petrography, synchrotron X‐ray diffraction (SXRD), and electron backscattered diffraction (EBSD). We determined the optimal conditions under which to measure the shock stage of olivine crystals in astromaterial grains by EBSD. We applied this EBSD procedure to the shock stage determination of four regolith grains from asteroid Itokawa, returned to earth by the Hayabusa spacecraft. Interpretation of these data required a parallel examination of three ordinary chondrite standards that exhibited shock histories ranging from stage 2 to stage 4, using all three techniques. Standard light optical petrography indicated shock stage of S2/3 for the 24 Itokawa grains analyzed. SXRD results for seven Itokawa grains indicate a shock stage of S2. EBSD maps of four Itokawa grains indicate shock stage S3. Thus, the different techniques indicate slightly different shock stages, probably due to small sampling populations for EBSD and SXRD. We therefore recommend that significantly more than seven regolith grains should be separately analyzed by any shock determination technique, probably between 10 and 20. In any case, Itokawa regolith grains have been shocked to stage S2/3, or approximately 5–10 GPa. Finally, we investigated the crystallinity of one Itokawa olivine by SXRD, determining that the 5–10 GPa shock it had experienced did not appreciably alter the size of the unit cell, contrary to some previous suggestions.

Mid‐Infrared Spectroscopy of Anorthosite Samples From Near Manicouagan Crater, Canada, as Analogue for Remote Sensing of Mercury and Other Terrestrial Solar System Objects

AbstractWe investigated mid‐infrared reflectance spectra of anorthosite samples from Mt. Briand near the Manicouagan impact structure. Microprobe analyses of the plagioclase minerals reveal that they have a similar chemical composition (labradoritic), which is corroborated by the location of the Christiansen Feature at around 7.96 m (1256 cm−1). However, their respective spectral shapes differ from each other in the region of the reststrahlen bands. This is linked to the degree of Al,Si order within the plagioclase minerals, which also correlates with the previously assumed distance of the sample site to the impact melt. Powdering and sieving led to remarkable changes in the spectra resulting from different mechanical stability of minerals contained in the sample. Our data show that even very weakly shocked (6–10 GPa, shockstage S2) anorthosites could show spectra of Al,Si disordered plagioclase which we attribute to post shock heating after the impact shock. Consequently, the degree of Al,Si order has to be taken into account in the interpretation of remote sensing data. A comparison of synthetic linear mixture with an average Mercury spectrum reveals the possible presence of more or less anorthositic material with reduced degree of Al,Si order of the plagioclase component on Mercury's surface. The results of our study are helpful for the interpretation of data returned by space missions, especially for MERTIS ‐ an infrared spectrometer on its way to Mercury.

Petrology and mineralogy of the Viñales meteorite, the latest fall in Cuba.

The new Cuban chondrite, Viñales, fell on February first, 2019 at Pinar del Rio, northwest of Cuba (22°37'10″N, 83°44'34″W). A total of about 50-100 kg of the meteorite were collected and the masses of individual samples are in a range 2-1100 g. Two polished thin sections were studied by optical microscope, Raman spectroscopy and electron microprobe analysis in this study. The meteorite mainly consists of olivine (Fa24.6), low-Ca pyroxene (Fs20.5), and troilite and Fe-Ni metal, with minor amounts of feldspar (Ab82.4-84.7). Three poorly metamorphosed porphyritic olivine-pyroxene and barred olivine chondrules are observed. The homogeneous chemical compositions and petrographic textures indicate that Viñales is a L6 chondrite. The Viñales has fresh black fusion crust with layered structure, indicating it experienced a high temperature of ∼1650°C during atmospheric entry. Black shock melt veins with width of 100-600 μm are pervasive in the Viñales and olivine, bronzite, and metal phases are dominate minerals of the shock melt vein. The shock features of major silicate minerals suggest a shock stage S3, partly S4, and the shock pressure could be >10 GPa.

The Kumtag meteorite strewn field

The Kumtag meteorite strewn field was found in the Kumtag desert, 132 km south of Hami city in the Xinjiang province, China. It is an ellipse of 2.5 × 7.9 km, with a long axis extending along the northeast-southwest direction. The largest individual meteorite of the strewn field weighs about 10 kg; the smallest individual has a mass of only 27 g. In total, more than 100 individuals with a total mass of more than 180 kg were collected. The location and the distribution of the fragments suggest that the Kumtag meteoroid entered the atmosphere in the direction Northeast-Southwest. All meteorites collected in this strewn field are samples from the same unique meteorite shower. The Kumtag meteorite is an H5 ordinary chondrite with a shock stage S2, and a weathering grade W2. The cosmic ray exposure age of Kumtag is 6.7 ± 0.8 Ma, which is rather typical for H chondrites and which indicates that Kumtag was derived from the massive impact event on its parent body ~7 Ma ago. A significant amount of He has been lost during certain unknown processe(s) before the Kumtag meteorite was ejected from its parent body.

Shock stage distribution of 2280 ordinary chondrites—Can bulk chondrites with a shock stage of S6 exist as individual rocks?

AbstractThe brecciation and shock classification of 2280 ordinary chondrites of the meteorite thin section collection at the Institut für Planetologie (Münster) has been determined. The shock degree of S3 is the most abundant shock stage for the H and LL chondrites (44% and 41%, respectively), while the L chondrites are on average more heavily shocked having more than 40% of rocks of shock stage S4. Among the H and LL chondrites, 40–50% are “unshocked” or “very weakly shocked.” Considering the petrologic types, in general, the shock degree is increasing with petrologic type. This is the case for all meteorite groups. The main criteria to define a rock as an S6 chondrite are the solid‐state recrystallization and staining of olivine and the melting of plagioclase often accompanied by the formation of high‐pressure phases like ringwoodite. These characteristics are typically restricted to local regions of a bulk chondrite in or near melt zones. In the past, the identification of high‐pressure minerals (e.g., ringwoodite) was often taken as an automatic and practical criterion for a S6 classification during chondrite bulk rock studies. The shock stage classification of many significantly shocked chondrites (>S3) revealed that most ringwoodite‐bearing rocks still contain more than 25% plagioclase (74%). Thus, these bulk chondrites do not even fulfill the S5 criterion (e.g., 75% of plagioclase has to be transformed into maskelynite) and have to be classified as S4. Studying chondrites on typically large thin sections (several cm2) and/or using samples from different areas of the meteorites, bulk chondrites of shock stage S6 should be extremely rare. In this respect, the paper will discuss the probability of the existence of bulk rocks of S6.

A meteorite impacted a house in San Carlos, Uruguay

Every year there are now almost two reports of meteorite falls that directly hit human beings or their belongings, which we call “damaging falls”. A new damaging fall occurred on September 18, 2015, when a meteorite impacted a house in the city of San Carlos (Maldonado, Uruguay). A 712 g stone broke through the asbestos cement roof and a wooden suspended ceiling. The meteorite and its fragments broke a wooden bed frame and a TV set. We conducted petrological and chemical analysis of the sample. The meteorite is classified as a LL6 chondritic breccia, with low content in siderophile minerals and moderate chondrule size. It has a shock stage S4 and a degree of weathering W0. This is the first Uruguayan meteorite to be confirmed. The prevalence of damaging falls is discussed.

The Kumtag 016 L5 strewn field, Xinjiang Province, China

AbstractThe Kumtag 016 strewn field was found in the eastern part of the Kumtag desert, Xinjiang Province, China. In this study, 24 recovered meteorites have been characterized by a suite of different analytical techniques to investigate their petrography, mineralogy, bulk trace elements, noble gas isotopic composition, density, and porosity. We attribute to the strewn field 22 L5 chondrites with shock stage S4 and weathering grade W2–W3. Two different meteorites, Kumtag 021, an L4 chondrite and Kumtag 032, an L6 chondrite, were recognized within the strewn field area. Moreover, Kumtag 003, an H5 chondrite, was previously found in the same area. We infer that the Kumtag 016 strewn field most likely consists of at least four distinct meteorite falls. The effects of terrestrial weathering on the studied meteorites involve sulfide/metal alteration, chemical changes (Sr, Ba, Pb, and U enrichments and depletion in Cr, Co, Ni, and Cs abundances), and physical modifications (decrease of grain density and porosity). Measurements of the light noble gases indicate that the analyzed Kumtag L5 samples contain solar wind‐implanted noble gases with a 20Ne/22Ne ratio of ~12.345. The cosmic‐ray exposure (CRE) ages of the L5 chondrites are in a narrow range (3.6 ± 1.4 Ma to 5.2 ± 0.4 Ma). For L4 chondrite Kumtag 021 and L6 chondrite Kumtag 032, the CRE ages are 5.9 ± 0.4 Ma and 4.7 ± 0.8 Ma, respectively.

The Buritizal meteorite: classification of a new Brazilian chondrite

Abstract On August 14, 1967, the reporter Saulo Gomes, working at TV Tupi, went to a small city in the State of Sao Paulo called Buritizal to investigate reports of a meteorite fall and write a newspaper report. He actually recovered three fragments of the meteorite at a small farm. In 2014, he donated one of the fragments to the Museu Nacional of the Universidade Federal do Rio de Janeiro (MN/UFRJ). We named this meteorite Buritizal and studied its petrology, geochemistry, magnetic properties and cathodoluminescence with the intent to determine the petrologic classification of the meteorite. In this manner, the Buritizal meteorite is classified as an ordinary chondrite LL 3.2 breccia (as indicated by lithic fragments). The meteorite consists of ~ 2% of metallic Fe,Ni and many well-defined chondrules with ~ 0.8 mm in average diameter. An ultramafic ferromagnesian mineralogy is predominant in the meteorite, represented by olivine, orthopyroxene, clinopyroxene, Fe-Ni alloy, troilite and glass. The total iron content was calculated as 20.88 wt%. Furthermore, the meteorite was classified as weathering grade W1 and shock stage S3. Buritizal is the 25th observed meteorite fall recovered in Brazil, of 70 meteorites known from Brazil. Thus, the study of the Buritizal meteorite is very important and relevant for the Brazilian scientific community.

Shocked chromites in fossil L chondrites: A Raman spectroscopy and transmission electron microscopy study

AbstractChromites from Middle Ordovician fossil L chondrites and from matrix and shock‐melt veins in Catherwood, Tenham, and Coorara L chondrites were studied using Raman spectroscopy and TEM. Raman spectra of chromites from fossil L chondrites showed similarities with chromites from matrix and shock‐melt veins in the studied L chondrite falls and finds. Chromites from shock‐melt veins of L chondrites show polycrystallinity, while the chromite grains in fossil L chondrites are single crystals. In addition, chromites from shock‐melt veins in the studied L chondrites have high densities of planar fractures within the subgrains and many subgrains show intergrowths of chromite and xieite. Matrix chromite of Tenham has similar dislocation densities and planar fractures as a chromite from the fossil meteorite Golvsten 001 and higher dislocation densities than in chromite from the fossil meteorite Sextummen 003. Using this observation and knowing that the matrix of Tenham experienced 20–22 GPa and <1000° C, an upper limit for the P,T conditions of chromite from Golvsten 001 and Sextummen 003 can be estimated to be 20–22 GPa and 1000° C (shock stage S3–S6) and 20 GPa and 1000° C (S3–S5), respectively, and we conclude that the studied fossil meteorite chromites are from matrix.

Chelyabinsk – a rock with many different (stony) faces: An infrared study

In order to provide spectral ground truth data for remote sensing applications, we have measured mid-infrared spectra (2–18 µm) of three typical, well-defined lithologies from the Chelyabinsk meteorite that fell on February 15, 2013, near the city of Chelyabinsk, southern Urals, Russia. These lithologies are classified as (a) moderately shocked, light lithology, (b) shock-darkened lithology, and (c) impact melt lithology. Analyses were made from bulk material in four size fractions (0–25 µm, 25–63 µm, 63–125 µm, and 125–250 µm), and from additional thin sections.Characteristic infrared features in the powdered bulk material of the moderately shocked, light lithology, dominated by olivine, pyroxene and feldspathic glass, are a Christiansen feature (CF) between 8.5 and 8.8 µm; a transparency feature (TF) in the finest size fraction at ∼13 µm, and strong reststrahlen bands (RB) at ∼9.1 µm, 9.5 µm, 10.3 µm, 10.8 µm, 11.2–11.3 µm, 12 µm, and between 16 and 17 µm. The ranges of spectral features for the micro-FTIR spots show a wider range than those obtained in diffuse reflectance, but are generally similar.With increasing influence of impact shock from ‘pristine’ LL5 (or LL6) material (which have a low or moderate degree of shock) to the shock-darkened lithology and the impact melt lithology as endmembers, we observe the fading/disappearing of spectral features. Most prominent is the loss of a ‘twin peak’ feature between 10.8 and 11.3 µm, which turns into a single peak. In addition, in the ‘pure’ impact melt “endmember lithology” features at ∼9.6 µm and ∼9.1 µm are also lost. These losses are most likely correlated with decreasing amounts of crystal structure as the degree of shock melting increases. These changes could connect mid-infrared features with stages for shock metamorphism (Stöffler et al., 1991): Changes up to shock stage S4 would be minor, the shock darkened lithology could represent S5 and the impact melt lithology S6 and higher.Similarities of the Chelyabinsk spectra to those of other LL chondrites indicate that the findings of this study could be related to this group of meteorites in general.

Meteorites found on Misfits Flat dry lake, Nevada

AbstractMeteorites have been found on the small Misfits Flat dry lakebed near Stagecoach, Nevada (119.382W, +39.348N). Since the first find on Sept. 22, 2013, a total of 58 stones of weathering stage W2/3 with a combined mass of 339 g have been collected in 19 visits to the area. This small (3.3 × 3.6 km) lakebed is now a newly designated dense collection area (DCA). Most meteorites were found in a small 350 × 180 m area along the north shore and most are fragments of several broken individual stones. Three of these fragments were classified as an LL4/5 of shock stage S2, now named Misfits Flat 001, one of which (stone MF33) fell 8.1 ± 1.3 ka ago based on the 14C terrestrial age, assuming it came from a 20–80 cm diameter meteoroid. In addition, a small darkly crusted meteorite MF34, now named Misfits Flat 002, was found 820 m WSW from the main mass. This meteorite is classified as an LL5 ordinary chondrite with shock stage S4/5. The meteorite is saturated in 14C at 63 dpm kg−1, suggesting it originated from the center of a 0.5 m diameter meteoroid, or deep inside a ~1.0 m meteoroid, less than 300 yr ago. Accounts exist of a fireball seen at 13:15 UT on March 2, 1895, that are consistent with the find location of Misfits Flat 002.

Shock-induced mobilization of metal and sulfide in planetesimals: Evidence from the Buck Mountains 005 (L6 S4) dike-bearing chondrite

The conditions under which metal cores formed in silicate-metal planetary bodies in the early Solar System are poorly known. We studied the Buck Mountains 005 (L6) chondrite with serial sectioning, X-ray computed microtomography, and optical and electron microscopy to better understand how metal and troilite were redistributed as a result of a moderately strong (shock stage S4) shock event, as an example of how collisional processes could have contributed to differentiation. The chondrite was recovered on Earth in multiple small pieces, some of which have a prominent, 1.5–3 mm wide holocrystalline shock melt dike that forms a jointed, sheet-like structure, as well as an associated shock vein network. The data suggest that metal and troilite within the dike were melted, sheared, and transported as small parcels of melt, with metal moving out of the dike and along branching veins to become deposited as coarser nodules and veins within largely unmelted host. Troilite also mobilized but partly separated from metal to become embedded as finer-grained particles, vein networks, and emulsions intimately intergrown with silicates. Rock textures and metal compositions imply that shock melts cooled rapidly against relatively cool parent body materials, but that low-temperature annealing occurred by deep burial within the parent body. Our results demonstrate the ability of shock processes to create larger metal accumulations in substantially unmelted meteorite parent bodies, and they have implications for the formation of iron meteorites and for core formation within colliding planetesimals.

Impact-induced brittle deformation, porosity loss, and aqueous alteration in the Murchison CM chondrite

X-ray computed tomographic scanning of a 44g Murchison stone (USNM 5487) reveals a preferred alignment of deformed, partially altered chondrules, which define a prominent foliation and weak lineation in 3D. The presence of a lineation and evidence for a component of rotational, noncoaxial shear suggest that the deformation was caused by impact. Olivine optical extinction indicates that the sample can be classified as shock stage S1, and electron backscatter diffraction (EBSD) and electron microscopy reveal that plastic deformation within the chondrules was minimal and that brittle deformation in the form of fracturing, cataclasis, and grain boundary sliding was the dominant microstructural strain-accommodating mechanism. Textural evidence such as serpentine veins parallel to the foliation fabric and crosscutting alteration veins strongly suggest that some aqueous alteration post-dated or was contemporaneous with the deformation and that multiple episodes of fracturing and mineralization occurred. Finally, using the deformed shape of the chondrules we estimate that the strain experienced by Murchison was 17–43%. This combined with the current measured porosity of Murchison suggests that the original bulk porosity of Murchison prior to its deformation was 32.2–53.4% and likely at the upper end of this range due to chondrule compressibility, providing a unique estimate of pre-deformation porosity for a carbonaceous chondrite. Our findings suggest that significant porosity loss, deformation, and compaction from impact can occur on chondrite parent bodies whose samples may record only a low level of shock, and that significant chondrule deformation resulting in a chondrite foliation fabric can occur primarily through brittle processes and does not require plastic deformation of grains.

Shock and annealing in aubrites: Implications for parent‐body history

AbstractSeveral aubrites (e.g., LAP 03719, Bishopville, Khor Temiki, ALH 83015) contain orthopyroxene grains that exhibit more‐pronounced shock effects than associated olivine grains. The orthopyroxene grains in these samples have clinoenstatite lamellae on (100) and exhibit weak mosaic extinction, characteristic of shock stage S4; the olivine grains exhibit either sharp optical extinction, characteristic of shock stage S1 (as in LAP 03719), or undulose extinction (shock stage S2), as in Bishopville and ALH 83015. The Khor Temiki regolith breccia contains S1 and S2 olivine grains. Because literature data show that diffusion is much slower in orthopyroxene than in olivine, it seems likely that aubrites experienced postshock, impact‐induced annealing. After differentiation, the aubrite parent asteroid suffered major collisions that caused extensive brecciation of near‐surface materials and damaged orthopyroxene and olivine crystal lattices. As a result of these impact events, some aubrites were shocked and buried within warm ejecta blankets or beneath fallback debris under the crater floor. Entombed olivine crystal lattices healed (and became unstrained, reaching shock stage S1), but orthopyroxene lattices retained their S4‐level shock‐damaged features. Aubrites with S4 orthopyroxene and S2 olivine were probably very weakly shocked again after olivine was annealed to S1.

Deformation and thermal histories of ordinary chondrites: Evidence for post-deformation annealing and syn-metamorphic shock

We show that olivine microstructures in seven metamorphosed ordinary chondrites of different groups studied with optical and transmission electron microscopy can be used to evaluate the post-deformation cooling setting of the meteorites, and to discriminate between collisions affecting cold and warm parent bodies. The L6 chondrites Park (shock stage S1), Bruderheim (S4), Leedey (S4), and Morrow County (S5) were affected by variable shock deformation followed by relatively rapid cooling, and probably cooled as fragments liberated by impact in near-surface settings. In contrast, Kernouvé (H6 S1), Portales Valley (H6/7 S1), and MIL 99301 (LL6 S1) appear to have cooled slowly after shock, probably by deep burial in warm materials. In these chondrites, post-deformation annealing lowered apparent optical strain levels in olivine. Additionally, Kernouvé, Morrow County, Park, MIL 99301, and possibly Portales Valley, show evidence for having been deformed at an elevated temperature (⩾800–1000°C). The high temperatures for Morrow County can be explained by dynamic heating during intense shock, but Kernouvé, Park, and MIL 99301 were probably shocked while the H, L and LL parent bodies were warm, during early, endogenically-driven thermal metamorphism. Thus, whereas the S4 and S5 chondrites experienced purely shock-induced heating and cooling, all the S1 chondrites examined show evidence for static heating consistent with either syn-metamorphic shock (Kernouvé, MIL 99301, Park), post-deformation burial in warm materials (Kernouvé, MIL 99301, Portales Valley), or both. The results show the pitfalls in relying on optical shock classification alone to infer an absence of shock and to construct cooling stratigraphy models for parent bodies. Moreover, they provide support for the idea that “secondary” metamorphic and “tertiary” shock processes overlapped in time shortly after the accretion of chondritic planetesimals, and that impacts into warm asteroidal bodies were common.

Chelyabinsk meteorite: Shock metamorphism, black veins and impact melt dikes, and the Hugoniot

The Chelyabinsk meteorite (which fell on February 15, 2013) is a LL5 chondrite of shock stage S4, whose fragments are classified into light and dark lithologies. According to the intensity of their shock metamorphism, light lithology fragments are subdivided into two groups, which were affected by peak pressures within the ranges of 20–25 and 25–30 GPa, respectively. The material of the dark lithology was shocked at 25–30 GPa but was then annealed, which resulted in a decrease in the discernible degree of shock metamorphism. Black veins cutting across both the light and the dark lithologies and impact melt dikes in the dark lithology were produced by friction melting along boundaries of blocks that had been generated by fragmentation in a shock wave. The impact melt of the dikes is slightly enriched in Si, Al, Ca, Na, and K and has an oxygen isotopic composition similar to the chondrite matrix. It is thought that black vein melt started to crystallize in a rarefaction wave. Melt in the dikes and the central portions of the black veins crystallized after total pressure release. Heating of material hosting the melt dikes resulted in its blackening and annealing of its shock metamorphic features. The Hugoniot obtained for the Chelyabinsk meteorite was utilized to calculate the post-shock and shock temperatures within a broad pressure range. According to these evaluations, the meteorite was heated for 65–135 degrees during the impact event. The melting of the LL chondrite started at a load of approximately 100 GPa because of the high “equilibrium” post-shock temperatures, and a pressure of 140 GPa resulted in the complete melting of the material.

Csátalja, the largest H4–5 chondrite from Hungary

We report here for the first time the composition and mineralogical studies on a new meteorite, which was found in August 2012 near the village of Csátalja, Hungary (46°0׳21׳׳N; 18°59׳27׳E). The Csátalja meteorite is classified as a H4–5 ordinary chondrite with shock stage S2 and a degree of weathering W1 and the total mass is 15kg. The Csátalja meteorite is characterized by well-defined chondrules composed either of olivine or pyroxene.X-ray diffractogram shows the primary phases olivine, pyroxene, kamacite, and albite. Metal particles were extracted from the bulk powdered samples exhibit only kamacite and small amounts of the intergrowth taenite/kamacite. Raman spectra of forsterite indicate that Csátalja meteorite suffered from relatively low shock pressure regime. The texture of chondrules varies from nonporphyritic (e.g., barred olivine, radial pyroxene) to porphyritic ones (e.g., granular olivine as well as olivine pyroxene). The meteorite name has not yet approved by the Nomenclature Committee of the Meteoritical Society.

Constraining the pressure threshold of impact induced calcite twinning: Implications for the deformation history of aqueously altered carbonaceous chondrite parent bodies

Calcite twinning in carbonaceous chondrite meteorites can be used to reconstruct the deformation history and the parent body environment during and/or after aqueous alteration, but the shock pressure threshold at which the twins develop is unknown. Accordingly, the aim of this study is to determine the magnitude of shock pressure that is needed to generate calcite twins. This was done by measuring the depths of twinning beneath the resulting craters from experimental impacts in six calcite targets, combined with hydrocode modelling of the peak pressures at the corresponding depths within the targets. Brecciation, fracturing and calcite e-twinning occur below the floors of all the craters and results from the hydrocode modelling show that the twins start to form at shock pressures of ∼110 to 480 MPa, which is at least a factor of ten higher than the 10 MPa that is considered to be required to produce calcite twins in low strain rate terrestrial settings. These pressures are equivalent to shock stage S1 as determined by olivine microstructures and consistent with calcite twinning in carbonaceous chondrites being a result of impact gardening in shallow levels of their asteroidal parent bodies.