Shelf-slope Break Research Articles

Behind the Scenes for the Designation of the Corales de Profundidad National Natural Park of Colombia

Deep-water environments make up 64% of the world’s oceans (nearly 202 million km2). In the past, the belief that this environment represented one of the most stable and unproductive ecosystems on the planet has been refuted by scientific research and the interest of potential productive sectors evaluating seabed resources. Human activities that threaten the health of deep-sea threats are uncontrolled and unregulated fishing, deep-sea mining, oil spills, marine litter, and climate change. With recent advances in technology, the study of deep-sea coral communities is a growing subject. The deep-sea corals are long-lived, slow-growing, and fragile systems, making them especially vulnerable to physical damage. In the last 40 years, Colombia has discovered these communities’ existence scarcely distributed in its territorial waters. A representative and irreplaceable sample of deep-sea coral formations triggered in 2013 the establishment of the Corales de Profundidad National Natural Park, a Marine Protected Area (MPA), which holds 40% of the marine biodiversity known in the Colombian Caribbean continental shelf-slope break. The MPA’s essential ecological value is theMadracis myriasterspecies’ presence as a primary habitat-forming organism, a unique habitat for the Caribbean and the world. Here we describe the MPA creation process in three phases. Firstly, in the provisioning phase, three main threats from human activities are identified. Secondly, in the preparation phase, the area’s conservation objectives and management category are defined, and the negotiation process with the fishing, communications, and oil and gas economic sectors is described. Lastly, in the designation phase, three MPA scenario proposals were evaluated, assessing the minimum distance, the possible effects of activities in the area as the main criteria for the buffer zone and the management of possible future impacts. As a result, the most extended boundary was adopted, guaranteeing these communities’ conservation despite the limited information to carry out a complete planning process. The MPA designation is considered the first experience of deep communities in the Southern Caribbean and an example that it is possible to have effective conservation agreements with economic sectors.

Basin margin sediment wedge build out of the Eastern Niger Delta: application of shelf-edge trajectory pattern studies

The understanding of how basin margin sediment wedge builds out causes shelf-edge migration with time is approached based on shelf-edge trajectory pattern analysis using a high-resolution mega-merge seismic data from the eastern Niger Delta, Nigeria. The study focuses on a seismic dip transect traversing the Greater Ughelli, Central Swamp, Coastal Swamp and the Shallow Offshore Depobelts of the Niger Delta. On the regional dip transects, shelf-edge sediments occur as clinoform-bearing wedges at and immediately updip of the shelf-slope break. The shelf edge is deeply buried (> 2–4 s, twt), around the Greater Ughelli and Central Swamps. But with changing structural style, sudden change of ascending shelf edge around the Central Swamp was observed. The huge listric growth fault in the Coastal Swamp; around Bonny area, once again cut the shelf edge into half, rotated it along the listric fault and buried it distally. Several depositional packages show low to moderate ascending shelf-edge trajectory with progradational to aggradational clinoform growth that is characterized by thin sand sheets across most of the shelf and upper slope, though few are also characterized by progradational clinoform growth with thick sand on the shelf, upper-tolower slope and basin floor. The deposition is usually on the Outer Shelf Terrace (OST) which is regressive in a flat and rising trajectory style. This study has demonstrated that accommodation and sediment flux are the dominant controls on how the study basin’s sediment wedge built out, whereby limited accommodation promotes sediments with significant shelf-edge advance and descending trajectories, while increasing accommodation promotes ascending trajectories and increased deposition on the outer shelf. The greater sediments on the Outer Shelf Terrace and the shelf margin than on the slope gives more hydrocarbon prospectivity search around the outer shelf and shelf margin.

Correlation of upper Miocene–Pliocene Lake Pannon deposits across the Drava Basin, Croatia and Hungary

Upper Miocene to Pliocene (Pannonian) sediments of the Pannonian Basin System accumulated in the brackish Lake Pannon and the fluvial feeder systems, between 11.6-2.6 Ma. Their stratigraphic subdivision has been problematic for a long time due to the laterally prograding architecture of the basin fill and the historically independently evolving stratigraphic schemes of the neighbouring countries. We correlated the lithostratigraphic units of the Lake Pannon deposits between Hungary and Croatia in the Drava Basin, using lithological, sedimentological and palaeontological data from boreholes and outcrops, and seismic correlation. The Croatica and Medvedski breg formations in Croatia correspond to the Endrőd Fm. in Hungary, comprising shallow to deep water, open lacustrine, calcareous to argillaceous marls. The Andraševec fm. in Croatia corresponds to the Szolnok and Algyő Fms. in Hungary, consisting of sandstones and siltstones of turbidite systems and of clay marls deposited on the shelf-break slope. The Nova Gradiška fm. in Croatia is an equivalent of the Újfalu Fm. in Hungary, built up of a variety of lithologies, including sand, silt, clay and huminitic clay, deposited in deltaic environments. The Pluska fm. in Croatia corresponds to the Zagyva Fm. in Hungary, consisting of variegated clays, silts, sands and lignites, deposited in alluvial and fluvial environments. Coarse-grained (sand, gravel) basal layers are assigned to the Kálla and Békés Fms. and the Sveti Matej member of the Croatica fm. Coarse-grained intercalations within the deep-water marls belong to the Dorozsma Member of the Endrőd Fm. in Hungary, and to the Bačun member of the Medvedski breg fm. in Croatia. Sediment transport and lateral accretion of the shelf edge in the Drava Basin took place from the N, NW, and W, to the S, SE, and E, respectively. According to the biostratigraphic and chronostratigraphic analyses, the oldest shelf-break slopes in the Mura Basin are more than 8 Ma old, whereas the youngest ones in the southeasternmost part of the Drava Basin may be Pliocene in age (younger than 5.3 Ma). Thus, the 180 km long and at least 700 m deep Drava Basin was transformed into a fluvial plain during the last 3.5 million years of the Miocene.

Structure and distribution of fish assemblages at Burdwood Bank, the first Sub-Antarctic Marine Protected Area “Namuncurá” in Argentina (Southwestern Atlantic Ocean)

The first non-coastal Sub-Antarctic Marine Protected Area (Namuncura) in Argentina was created in 2013, at Burdwood Bank (MPAN-BB), an undersea plateau located about 200 km south from Malvinas/Falkland Islands, SW Atlantic Ocean. The main contribution of this work was to explore fish species composition and the structure of fish assemblages in three different zones of the MPAN-BB with different conservation strategies and different surrounding areas. Twenty-two fishing trawls were performed using a demersal bottom trawl pilot net at depths between 71 and 608 m. A total of 667 fish belonging to 30 species were collected in the surveyed area. The richest family in terms of species number was Nototheniidae (seven species), followed by Macrouridae, Myxinidae and Zoarcidae (four species each), then Moridae and Arhynchobatidae (three species each), and finally Muraenolepididae and Psychrolutidae (two species each). The remaining families were represented by a single species. Three significantly different fish assemblages were detected. These distinct assemblages were largely circumscribed at the plateau, the shelf-break slope, and the area west of the BB. The results showed that fish diversity in the MPAN-BB is relatively high constituting ~ 10% of the fish composition reported for the Atlantic sector of the Magellanic Province. The present data suggest that fishes are an important component of the benthic community planned to be protected by the implementation of the MPAN-BB. These findings have important implications for habitat preservation and threatened species conservation.

Sandy Debris Flow Sedimentary Characteristics and Patterns in the Meishan Formation of Northern Lingshui Sag, Qiongdongnan Basin

Based on drilling core descriptions and micro sedimentary features, combined with regional paleogeographic features, imaging logging and 3D seismic attribute analysis, the sedimentary characteristics and representative identification mark of sand debris flow sandstone in Meishan formation of northern Lingshui Sag, Qiongdongnan basin are discussed in detail, and the sand debris flow sedimentary pattern in the study area is established. Meishan formation sandy debris flow sandstone in the study area is mainly consist of 2 lithological associations, thick massive siltstone to very fine sandstone without sedimentary structure on the upper part and silty mudstone, mudstone and siltstone interbeds with abundant contemporaneous deformation structure on the lower part, and the “mud-encased sand” structure in massive sandstone can be used as an important symbolic evidence to identify the sand debris flow deposits. The distribution of sandy debris flow sandstone is controlled by shelf slope break, and the area with relatively gentle, constructive slope, where the slope break line is characterized by “bulge” form to the sea, is the most favorable area for the development of sandy debris flow sandstone reservoirs.

River‐dominated and tide‐influenced shelf‐edge delta systems: Coarse‐grained deltas straddling the Early–Middle Jurassic shelf–slope break and transforming downslope, Lajas–Los Molles formations, Neuquén Basin, Argentina

AbstractThe three‐dimensional facies and architecture variability of shelf‐edge deltaic units cropping out at the transition between the Lower–Middle Jurassic Lajas and Los Molles formations of southern Neuquén Basin, Argentina, is presented here, as well as their stratigraphic relationship to uppermost deep‐water slope channel systems. Deep‐water, slope mudstones with thin turbidite beds merge upward with prodelta mudstones and thin sandstones, which are truncated by delta‐front to mouth‐bar sandstones. The latter sandstones are then downcut by large‐scale, trough cross‐stratified coarse‐grained sandstones and conglomerates of distributary channel systems and along‐strike, amalgamated with cross‐bedded sandy units showing evidence of tidal reworking. Proximal–distal facies and architecture variability within a shelf‐edge deltaic succession demonstrates that distributary channel‐complexes become wider and deeper basinward, forming channelized river‐dominated distributary fairways separated by tidally reworked inter‐distributary sand belts at the shelf edge. Evidence from depositional‐dip oriented outcrops shows a lack of collapsed and slumped strata at the shelf edge, and that the coarse shelf‐edge distributary channel fills continue far down the deepwater slope, and conglomerates transform to become high‐density turbidites to mainly thick‐bedded, sand‐matrix‐supported debrites. The interplay between flood tides and river currents is interpreted to have primarily modulated the focusing of river drainages, and consequently coarse‐grained sediment transport, along preferential routes on the outer‐shelf to shelf‐edge and down onto the slope. This contribution documents a unique example of coarse‐grained (mostly conglomeratic) shelf‐edge delta systems, tying bed‐scale facies and architecture data to a seismic‐scale shelf‐margin morphology, thus providing outcrop analogue data for the characterization of shelf‐edge delta systems in the subsurface.

Growth of triangle zone fold-thrusts within the NW Borneo deep-water fold belt, offshore Sabah, southern South China Sea

AbstractThe NW Borneo deep-water fold-and-thrust belt, offshore Sabah, southern South China Sea, contains a structurally complex region of three to four seafloor ridges outboard of the shelf-slope break. Previous studies have suggested the seafloor ridges formed either above shale diapirs produced by mass movement of overpressured shales (i.e., mobile shale) or above an imbricate fold-and-thrust array. Here, we performed tectonostratigraphic analyses on a petroleum industry three-dimensional (3-D) seismic volume that imaged the full growth stratal record. We show fold growth history, deformation styles, along-strike structural variabilities, and synkinematic sedimentation during triangle zone–style fold growth. Nine seismic horizons within growth strata were mapped and correlated to petroleum industry seismostratigraphy. Synkinematic sedimentation interactions with growing folds and near-surface strains were analyzed from seismic attribute maps. We interpret that the seafloor structures were formed by imbricate thrusts above multiple detachments. We estimate ∼8 km minimum shortening since the late Miocene ca. 10 Ma. The folds show oversteepened fold forelimbs, back-rotated backlimbs, and forward-vergent (NW to NNW) “blind” thrust ramps that terminate within the growth strata. Fold cores show evidence of internal shear. Immature folds show detachment fold geometries, whereas mature folds show forelimb break thrusts, type I triangle zones, and rotated forward-vergent roof thrusts. Thrust linkages spaced ∼10 km apart were exploited as thrust top synkinematic sedimentation pathways; the linkages also partition near-surface strains. Our comprehensive, three-dimensional documentation of triangle zone fold growth and sedimentation in a deep-water fold belt highlights internal shear, multiple detachments, and opposite thrust vergence; mobile shales are not required to explain the deformation.

High-resolution sequence architecture and depositional evolution of the Quaternary in the northeastern shelf margin of the South China Sea

The northeastern shelf margin of the South China Sea (SCS) is characterized by the development of large scale foresets complexes since Quaternary. Based on integral analysis of the seismic, well logging and paleontological data, successions since ~3.0 Ma can be defined as one composite sequence, consist of a set of regional transgressive to regressive sequences. They can be further divided into six 3rd order sequences (SQ0–SQ5) based on the Exxon sequence stratigraphic model. Since ~1.6 Ma, five sets of deltaic systems characterized by development of wedge-shaped foresets complexes or clinoforms had been identified. High-resolution seismic data and the thick foresets allowed further divided of sub-depositional sequences (4th order) of regression to transgression, which is basically consistent with published stacked benthic foram O-isotope records. Depositional systems identified in the study area include deltaic deposits (inner-shelf deltas and shelf-edge deltas), incised valleys, and slope slumping massive deposits. Since ~1.6 Ma, clinoforms prograded from the southern Panyu Lower Uplift toward the northern Baiyun Depression, shelf slope break migrated seaward, whereas the shelf edge of SQ0 migrated landward. The development of incised valleys in the continental shelf increased upward, especially intensive on the SB3 and SB2. The slumping massive deposits increased abruptly since SB2, which corresponds to the development of incised valleys. The evolution of depositional systems of continental slope mainly controlled by the combined influence of sea level changes, tectonic movements, sediment supply and climate changes. Since ~3.0 Ma, relative sea level of the northern SCS had been experienced transgression (~3.0 Ma BP) to regression (~1.6 Ma BP). The regional regression and maximum transgressions of the composite sequences were apparently enhanced by uplift or subsidence related to tectono-thermal events. In addition, climatic variations including monsoon intensification and the mid-Pleistocene transition may have enhanced sediment supply by increasing erosion rate and have an indispensable influence on the development of the incised valleys and 5 sets of deltaic systems since ~1.6 Ma.

Deep-water fisheries along the British Isles continental slopes: status, ecosystem effects and future perspectives.

In this paper, we revisit the state of deep-water fisheries to the west of the British Isles and aim to provide an overview on the key drivers behind community changes along continental margins. The deep-water fisheries to the west of the British Isles that extend from the shelf-slope break down to the lower slope and along banks and seamounts of the Rockall Basin, mainly target blue ling Molva dypterygia, roundnose grenadier Coryphaenoides rupestris, orange roughy Hoplostethus atlanticus, with by-catches of black scabbardfish Aphanopus carbo and tusk Brosme brosme. These fishing grounds experienced a long period of exhaustive exploitation until the early 2000s, but subsequently the implementation of management strategies has helped to relieve excessive fishing pressure. It is widely accepted that a better understanding of the long-term implications of disturbance is needed to understand patterns in deep-water communities and what sustainable use and exploitation of resources might look like in this context.

Landslide Tsunami Hazard Along the Upper US East Coast: Effects of Slide Deformation, Bottom Friction, and Frequency Dispersion

Numerical simulations of Submarine Mass Failures (SMFs) are performed along the upper US East Coast to assess the effect of slide deformation on predicted tsunami hazard. Tsunami generation is simulated using the three-dimensional non-hydrostatic model NHWAVE. For rigid slumps, the geometry and law of motion are specified as bottom boundary conditions. Deforming slide motion is modeled using a depth-integrated bottom layer of dense Newtonian fluid, fully coupled to the overlying fluid motion. Once the SMFs are no-longer tsunamigenic, tsunami propagation simulations are performed using the Boussinesq wave model FUNWAVE-TVD, using nested grids of increasingly fine resolution towards shore and employing a one-way coupling methodology. Probable maximum tsunamis are simulated for Currituck SMF proxies sited in four areas of the shelf break slope that have enough sediment accumulation to cause large failures. Deforming slides have a slightly larger initial acceleration, but still generate a smaller tsunami than rigid slumps due to their spreading and thinning out during motion, which gradually makes them less tsunamigenic. Comparing the maximum envelope of surface elevations along a 5 m isobath, consistent with earlier work, the bathymetry of the wide shelf is found to strongly control the spatial distribution of tsunami inundation. Overall, tsunamis caused by rigid slumps are worst case scenarios, providing up to 50% more inundation than for deforming slides having a moderate level of viscosity set in the upper range of debris flows. Tsunamis from both types of SMFs are able to cause water withdrawal to the 5 m isobath or deeper. Bottom friction effects are assessed by performing some of the simulations using two different Manning coefficients, one 50% larger than the other. With increased bottom friction, the largest tsunami inundations at the coast are reduced by up to 15%. Selected simulations are rerun by turning off dispersion in the model, which leads to moderate changes in maximum surface elevations nearshore (− 10 to + 5% changes), but to more significant effects in the far field (− 40 to 80% changes). Onshore, dispersion causes the appearance of short period undular bores that eventually break nearshore without significantly affecting inundation at the coast. However, these bores increase wave-induced maximum flow velocity and impulse forces, the latter by up to 40%, which may affect the design of coastal structures.

Sedimentological and stratigraphic characterization of Cretaceous upper McMurray deposits in the southern Athabasca oil sands, Alberta, Canada

The Lower Cretaceous McMurray Formation located in northeastern Alberta, Canada, is host to one of the largest bitumen resources in the world. In this paper, we provide an integrated sedimentological and stratigraphic analysis of the upper McMurray member located in the Pike and Jackfish project areas (Townships 73–76 and Ranges 4–7 W4M) of the southern Athabasca oil sands. Using core data, geophysical well logs, and seismic data, two main facies associations (embayment and fluvial) are evident. The embayment deposits were likely sourced by up-dip distributary channels and are commonly expressed in the subsurface as a series of coarsening-upward parasequences. The facies expressions in core range from bioturbated mudstones to wave-rippled sandstones. Noticeable, however, is the fact that there are areas where strata within the parasequences are instead substituted with sand, inclined heterolithic stratification, and mud. These deposits, in the form of fluvial channels with brackish-water overprint, occur at three different parasequence horizons within the study area. The removal of these embayment deposits is believed to be initiated, in part, by halite dissolution of the Middle Devonian Prairie Evaporite Formation deposits during upper McMurray deposition. Notably, the halite dissolution edge on the eastern half of the study area is believed to have created a subregional shelf–slope break during upper McMurray deposition. As such, the distributary channels likely re-equilibrated themselves to the slope created by the salt dissolution edge and thus proceeded to incise into previously deposited upper McMurray parasequence and underlying middle McMurray deposits.

Bering Sea surface water conditions during Marine Isotope Stages 12 to 10 at Navarin Canyon (IODP Site U1345)

Abstract. Records of past warm periods are essential for understanding interglacial climate system dynamics. Marine Isotope Stage 11 occurred from 425 to 394 ka, when global ice volume was the lowest, sea level was the highest, and terrestrial temperatures were the warmest of the last 500 kyr. Because of its extreme character, this interval has been considered an analog for the next century of climate change. The Bering Sea is ideally situated to record how opening or closing of the Pacific–Arctic Ocean gateway (Bering Strait) impacted primary productivity, sea ice, and sediment transport in the past; however, little is known about this region prior to 125 ka. IODP Expedition 323 to the Bering Sea offered the unparalleled opportunity to look in detail at time periods older than had been previously retrieved using gravity and piston cores. Here we present a multi-proxy record for Marine Isotope Stages 12 to 10 from Site U1345, located near the continental shelf-slope break. MIS 11 is bracketed by highly productive laminated intervals that may have been triggered by flooding of the Beringian shelf. Although sea ice is reduced during the early MIS 11 laminations, it remains present at the site throughout both glacials and MIS 11. High summer insolation is associated with higher productivity but colder sea surface temperatures, which implies that productivity was likely driven by increased upwelling. Multiple examples of Pacific–Atlantic teleconnections are presented including laminations deposited at the end of MIS 11 in synchrony with millennial-scale expansions in sea ice in the Bering Sea and stadial events seen in the North Atlantic. When global eustatic sea level was at its peak, a series of anomalous conditions are seen at U1345. We examine whether this is evidence for a reversal of Bering Strait throughflow, an advance of Beringian tidewater glaciers, or a turbidite.

Characteristics and identification of high quality deep-water gravity flow sandstone reservoirs in Baiyun sag, Pearl River Mouth Basin, South China Sea

Abstract The characteristics and identification methods of high quality deep-water gravity flow sandstone reservoirs in Baiyun sag of the Pearl River Mouth Basin are examined based on three-dimensional seismic and drilling data, and deep water sedimentary theory. The oil and gas discovered in the deep water of the Baiyun sag are dominantly from high quality gravity flow sandstones, including channel complexes, sheets, and channel-levee complexes. The analyses of the sediment supply, feeding channel, internal architecture of sedimentary bodies, depositional process and flow regime show that the development of three types of high quality reservoirs are controlled by sediment composition of the provenance (continental margin): Under the background of rich sand provenance, sandy debris flow is likely to form, giving rise to high quality reservoirs like channel complexes and sheets down dip the shelf-slope break. These reservoirs can be identified by seismic reflections such as incised valley, mound shape, and amplitude anomaly, and described by combining single sand body tracking with waveform recognition of sands and seismic attribute analysis. Under the background of sand-mud mixed provenance, gravity flow deposits are to occur below the shelf-slope break, where sedimentation differentiation is the key to the formation of high quality reservoirs. In the case that channel-levee complex is formed, high quality sandstone reservoirs, usually in the channel or the fan lobe below, can be identified and described by seismic features like U-shaped erosion on seismic profile, amplitude anomaly, bird-wing shaped seismic reflection, and waveform recognition.

Assessing palaeobathymetry and sedimentation rates using palynomaceral analysis: a study of modern sediments from the Gulf of Papua, offshore Papua New Guinea

Palynologists interested in better understanding the sedimentation and energy of depositional environments have often included studies of palynomaceral fragments, particularly when performing palynofacies analyses. Due to the difficult nature of classifying these fragments, researchers have developed numerous, often overlapping, classification schemes. These different schemes make it difficult to compare and contrast between research projects. Determining the appropriate scheme to apply when counting these fragments can be confusing, and application of these schemes can yield inconclusive results, especially when sedimentation and energy are in constant flux. A scheme of five categories, including brown wood (palynomaceral 1–2), leaf cuticle (palynomaceral 3), black debris (palynomaceral 4), structureless organic matter (SOM) and resin, is utilised here. It is applied to the analysis of 64 modern samples from the top 0–4 cm of sediment collected throughout the Gulf of Papua, Papua New Guinea. These samples span a suite of common marine depositional environments: river mouths and deltas, the proximal portion of the continental shelf dominated by a large clinoform, and turbidite and hemipelagic/pelagic deposits on the slope and in the deep ocean basin. Principal component analysis (PCA) confirms this simplified classification scheme provides an indirect means of assessing distance from shore and shelf-slope break, overall water depth and sediment accumulation rate, but other factors, such as processing technique, marine productivity, sediment source, time in transport and residence and bioturbation, are taken into account to fully explain distribution.

Fluid accumulation along the Costa Rica subduction thrust and development of the seismogenic zone

AbstractIn 2011 we acquired an 11 × 55 km, 3‐D seismic reflection volume across the Costa Rica margin, NW of the Osa Peninsula, to accurately image the subduction thrust in 3‐D, to examine fault zone properties, and to infer the hydrogeology that controls fluid accumulation along the thrust. Following processing to remove water column multiples, noise, and acquisition artifacts, we constructed a 3‐D seismic velocity model for Kirchhoff prestack depth migration imaging. Images of the plate boundary thrust show high‐reflection amplitudes underneath the middle to lower slope that we attribute to fluid‐rich, poorly drained portions of the subduction thrust. At ~ 5 km subseafloor, beneath the upper slope, the plate interface abruptly becomes weakly reflective, which we interpret as a transition to a well‐drained subduction thrust. Mineral dehydration during diagenesis may also diminish at 5 km subseafloor to reduce fluid production and contribute to the downdip change from high to low amplitude. There is also a layered fabric and systems of both thrust and normal faults within the overriding plate that form a “plumbing system.” Faults commonly have fault plane reflections and are presumably fluid charged. The faults and layered fabric form three compartmentalized hydrogeologic zones: (1) a shallow NE dipping zone beneath the slope, (2) a steeply SW dipping zone beneath the shelf slope break, and (3) a NE dipping zone beneath the shelf. The more direct pathway in the middle zone drains the subduction thrust more efficiently and contributes to reduced fluid pressure, elevates effective stress, and creates greater potential for unstable coseismic slip.

Hydrocarbon accumulation conditions and exploration direction of Baiyun–Liwan deep water areas in the Pearl River Mouth Basin

An integrated geologic study was performed in the Baiyun–Liwan deep water areas, Pearl River Mouth Basin, based on the achievements obtained during the past five exploration stages. The following understandings were obtained. (1) The Baiyun Sag has superior source rock conditions and has experienced three tectonic evaluation stages like rifting, rifting-depression and depression. The Wenchang–Enping Fms deposited during the rifting stage have large hydrocarbon generation potentials. During the rifting-depression and depression stages, the deposition in the study area was controlled by the Oligocene and Miocene shelf slope break zones. The Oligocene Zhuhai Fm shallow marine delta-longshore depositional system and the Miocene Zhujiang–Hanjiang Fms deep fan depositional system were formed, and they are the most favorable reservoir-caprock assemblages in the study area. (2) The Hydrocarbon accumulation pattern in the deep waters is different from that in the northern shallow waters. Shelf slope break zone, composite conduction system consisting of structural ridge, fault, sandbody, unconformity and fluid diapir as well as late tectonic movement are the three major factors controlling hydrocarbon migration and accumulation in the study area. (3) The Liwan 3-1 gas field is a typical example. The superior trapping conditions, high-quality reservoirs of delta distributary channel controlled by shelf slope break zone, vertical conduction system consisting of fault and diapir, as well as the overlying massive marine mudstone caprock provide favorable geologic conditions for the formation of large gas fields. Four areas were identified as the targets of gas exploration in the near future: the deep water fan system in the central sag, the structural-stratigraphic traps in the uplifted areas on both sides of the main sag of Baiyun, a series of large structural traps on the fault terrace to the southwest of the main sag, and the ultra-deep frontiers in sags such as Liwan to the south of the main sag.

Iron speciation in the eastern tropical South Pacific oxygen minimum zone off Peru

Vertical profiles of total dissolved iron (DFe), Fe(II), and hydrographic parameters were obtained along three transects across the continental shelf off Peru in October 2005. Fe(II) and DFe concentrations were determined using luminol chemiluminescence and isotope dilution inductively coupled plasma mass spectrometry (ICP‐MS), respectively. The objective was to study the relationships among redox chemistry, nitrogen‐cycle processes, bottom topography, and the distribution and chemistry of iron in the region. The results are the most thorough survey to date of Fe geochemistry in this region. Exceedingly high DFe (∼ 50–75 nmol L−1) was measured over the wide northern continental shelf, with most of the dissolved Fe present as Fe(II) below the oxycline. In southern Peru, the shelf is narrower, and dissolved Fe concentrations were 10‐fold lower. Moreover, a smaller fraction of the dissolved Fe was present as Fe(II) in the south, even below the oxycline. At the western ends of the transects, Fe(II) maxima were coincident with deep (i.e., secondary) nitrite maxima. This suggests a relationship between nitrate reduction and Fe(II) accumulation in the water column. However, over the shelf, Fe(II) was also influenced by benthic processes. Large lateral gradients in dissolved Fe across the shelf–slope break reflect Fe removal by oxidative scavenging, and it seems plausible that much of the Fe is “trapped” by redox cycling on the shelf. Nevertheless, the maintenance of dissolved Fe(II) filaments within the secondary nitrite maxima constitutes an important mechanism for Fe transport offshore.

Patterns in groundfish abundance along the Eastern Bering Sea outer continental margin

AbstractWigand, L. A., Klinger, T., and Logsdon, M. G. 2013. Patterns in groundfish abundance along the Eastern Bering Sea outer continental margin. – ICES Journal of Marine Science, 70: 1181–1197. Place-based management approaches require understanding the spatial arrangement and interaction of elements. To address this need, we explored the utility of spatial-pattern analysis to understand the distribution of groundfish in the Eastern Bering Sea outer continental margin. We divided this region into discrete geomorphological units to explore spatial pattern on a range of scales. We used groundfish catch per unit effort (cpue) trawl survey data collected in four years to quantify spatial autocorrelation. Global statistics indicated that groundfish cpue was dominated by clusters of low values in all years. Local statistics showed that clusters of low values in groundfish cpue were confined to the southern portion of the study area, while clusters of high values varied across the study area. Outliers were most commonly found in close proximity to the shelf–slope break. Our results reveal the existence of spatial dependency in groundfish abundance and demonstrate that spatial analysis can be used to better understand spatial arrangements of these and other living marine resources, and to quantify and validate the local ecological knowledge of resource users. Our results indicate the feasibility of using spatially explicit tools to improve integration and visualization of marine environmental data for purposes of management and conservation.

A Review on Tectonic Record of Strain Buildup and Stress Release across the Andean Forearc along the Gulf of Guayaquil-Tumbes Basin (GGTB) near Ecuador-Peru Border

Gravimetric and geologic data show that the reactivation of the Neogene Interandean depression and/or the ~75 - 65 Ma ophiolite suture into the modern dynamic of the Andes controlled the Gulf of Guayaquil Tumbes basin (GGTB) location and evolution during the past 1.8 - 1.6 Myr at least. Depending on whether the remobilization occurred along the interandean depression or the ophiolite suture, the GGTB evolved trough pure or simple shear mechanisms, respectively. Because the GGTB exhibits an along strike tectonic asymmetry associated with a pervasive seismic gap, the simple shear solution is more likely. Tectonic inversion occurred along a mid-crust detachment (the Mid-Crust detachment hereafter) matching the ophiolite suture that accommodates the North Andean Block (NAB) northward drift. The so-called Decoupling Strip located at the shelf slope break accommodated the tensional stress rotation from N-S along the shelf area i.e. NAB-drift induced to E-W along the continental margin i.e. subduction-erosion-induced. The landward dipping Woollard detachment system located at the Upper-Lower slope boundary connects the subduction channel at depth, allowing the Upper slope to evolve independently from the Lower slope wedge. The long-term recurrence interval between earthquakes, the strong interplate coupling, and the aseismic creeping deformation acting along the main low-angle detachments i.e. the Woollard and the Mid-Crust detachments may account for the pervasive seismic gap at the GGTB area. Because the subduction channel exhibits no record of significant seismic activity, no evidence exists to establish a link between the GGTB sustained subsidence and a basin-centered asperity. Because the GGTB is a promising site of hydrocarbon resources, to understand processes at the origin of this escape-induced forearc basin has a major economic interest.

Genetic types and sequence stratigraphy models of Palaeogene slope break belts in Qikou Sag, Huanghua Depression, Bohai Bay Basin, Eastern China

The division and analysis of the genetic types of slope breaks will be helpful in studying the enrichment regularity of hydrocarbon reservoirs because the enrichment of hydrocarbon reservoirs is closely related to the shelf-slope break types in continental lake basins or sags in China. This paper analyses the types of basin margins in Qikou Sag by assessing the sag boundary fault characteristics and spatial combination patterns using high-resolution three-dimensional seismic data, well logs and other data. Basin margins were divided into four types: steep slope fault belts, multi-level step-fault belts, steep slope step-fault belts and slope break flexure belts. Different types of depositional systems developed near the different basin margins, and correspondingly, four types of sequence stratigraphic patterns were developed. According to the study of trap types that occur adjacent to the different slope-break zones, fault-controlled lithologic traps were the predominant trap type in fault-controlled slope break zones, and lithologic traps occurred in the sag centre distant from the boundary faults. Along the slope break flexure belt, different types of traps developed in different slope break levels; stratigraphic unconformity traps occurred within the first slope break level, and stratigraphic–lithologic traps and up-dip pinchout lithologic traps were found in the second slope break level. So the deployment of future exploration should be conducted at different levels in Qikou Sag.