Shear Strengthening Of Concrete Beams Research Articles

Shear Strengthening of Reinforced Concrete Beams Using Fibre Reinforced Polymer: A Critical Review

The primary purpose of reinforcing bar stirrups in a reinforced concrete beam is to improve shear strength. The FRP system may significantly improve a concrete beam’s ultimate shear strength, serviceability, and ductility. The application of FRP for the repair and reinforcement of the structures has become very popular due to its low weight, high tensile strength, and simplicity of installation on uneven surfaces. FRP material outperforms other traditional materials in strengthening applications due to its high strength-to-weight and stiffness-to-weight ratios, resistance to corrosion, and ease of handling. The overall objective of this research is to investigate and improve the understanding of the recent research in the area of shear FRP strengthening of reinforced concrete beams. In this paper, recent publications were reviewed to see how different anchoring procedures, different factors that affect FRP performance and different failure scenarios affect the shear strengthening of concrete beams. The benefits and limits of FRP systems, as well as some current research trends are discussed in this project. From the research, it can be stated that type of anchorage technique and different parameter give a different impact to failure mode of the beam.

Textile-reinforced mortar (TRM) versus fiber-reinforced polymers (FRP) in shear strengthening of concrete beams

This paper presents an experimental study on shear strengthening of rectangular reinforced concrete (RC) beams with advanced composite materials. Key parameters of this study include: (a) the strengthening system, namely textile-reinforced mortar (TRM) jacketing and fiber-reinforced polymer (FRP) jacketing, (b) the strengthening configuration, namely side-bonding, U-wrapping and full-wrapping, and (c) the number of the strengthening layers. In total, 14 RC beams were constructed and tested under bending loading. One of the beams did not receive any strengthening and served as control beam, eight received TRM jacketing, whereas the rest five received FRP jacketing. It is concluded that the TRM is generally less effective than FRP in increasing the shear capacity of concrete, however the effectiveness depends on both the strengthening configuration and the number of layers. U-wrapping strengthening configuration is much more effective than side-bonding in case of TRM jackets and the effectiveness of TRM jackets increases considerably with increasing the number of layers.

Shear Strengthening of RC Beams Using GFRP Vertical Strips — An Experimental Study

The uses of composite materials for the strengthening of shear deficient concrete structures are limited. The research in this area has been taking place since 1991. Study in this field aims at understanding the various reinforcement configurations of sheets that can be used for shear strengthening and also the different failure modes a strengthened beam undergoes at the ultimate state. Furthermore, the experimental data bank for shear strengthening of concrete beams, using FRP, remains relatively sparse due to which the design algorithms for computing the shear contribution of FRP are not yet clear. The objective of this study is to clarify the role of GFRP strips, epoxy bonded to the beam web for shear strengthening of RC beams. Included in the study are effectiveness in terms of width and spacing of vertical GFRP strips, spacing of internal steel stirrups, and longitudinal steel rebar section on shear capacity of the RC beam. The study also aims to understand the shear contribution of concrete, shear strength due to steel bars and steel stirrups, and the additional shear capacity due to glass fiber reinforced polymer strips in a RC beam.

Strengthening of RC beams in shear using GFRP inclined strips – An experimental study

Though there have been a number of studies on shear strengthening of RC beams using externally bonded fiber reinforced polymer sheets, the behaviour of FRP strengthened beams in shear is not fully understood. This is partly due to various reinforcement configurations of sheets that can be used for shear strengthening and partly due to different failure modes a strengthened beam undergoes at ultimate state. Furthermore, the experimental data bank for shear strengthening of concrete beams using FRP remains relatively sparse due to which the design algorithms for computing the shear contribution of FRP are not yet clear. The objective of this study is to clarify the role of glass fiber reinforced polymer inclined strips epoxy bonded to the beam web for shear strengthening of reinforced concrete beams. Included in the study are effectiveness in terms of width and spacing of inclined GFRP strips, spacing of internal steel stirrups, and longitudinal steel rebar section on shear capacity of the RC beam. The study also aims to understand the shear contribution of concrete, shear strength due to steel bars and steel stirrups and the additional shear capacity due to glass fiber reinforced polymer strips in a RC beam. And also to study the failure modes, shear strengthening effect on ultimate force and load deflection behaviour of RC beams bonded externally with GFRP inclined strips on the shear region of the beam.

A model for predicting the shear bearing capacity of FRP-strengthened beams

The shear failure of reinforced concrete beams needs more attention than the bending failure since no or only small warning precedes the failure. For this reason, it is of utmost importance to understand the shear bearing capacity and also to be able to undertake significant rehabilitation work if necessary. In this paper, a design model for the shear strengthening of concrete beams by using fiber-reinforced polymers (FRP) is presented, and the limitations of the truss model analogy are highlighted. The fracture mechanics approach is used in analyzing the bond behavior between the FRP composites and concrete. The fracture energy of concrete and the axial rigidity of the FRP are considered to be the most important parameters. The effective strain in the FRP when the debonding occurs is determined. The limitations of the anchorage length over the cross section are analyzed. A simple iterative design method for the shear debonding is finally proposed.

Efficacy of CFRP-based techniques for the flexural and shear strengthening of concrete beams

Near surface mounted (NSM) and externally bonded reinforcement (EBR) strengthening techniques are based on the use of carbon fiber reinforced polymer (CFRP) materials and have been used for the structural rehabilitation of concrete structures. In the present work, the efficacies of the NSM and EBR techniques for the flexural and shear strengthening of reinforced concrete beams are compared carrying out two experimental groups of tests. For the flexural strengthening, the efficacy of applying CFRP laminates according to NSM is compared to those resulting from applying CFRP laminates and wet lay-up CFRP sheets according to EBR technique. The influences of the equivalent reinforcement ratio (steel and laminates) and spacing of the laminates on the efficiency of the NSM technique for the flexural strengthening is also investigated. A numerical strategy is implemented to analyze the applicability of the FRP effective strain concept, proposed by ACI and fib in the design of FRP systems for the flexural strengthening. To assess the efficacy of the NSM technique for the shear strengthening of concrete beams, four beam series of distinct depth and longitudinal tensile steel reinforcement ratio are tested. Each series is composed of one beam without any shear reinforcement and one beam using the following shear reinforcing systems: conventional steel stirrups; strips of wet lay-up CFRP sheet of U configuration applied according to EBR technique; and laminates of CFRP embedded into vertical or inclined (45°) pre-cut slits on the concrete cover of the beam lateral faces, according to the NSM technique. Using the obtained experimental results, the performance of the analytical formulations proposed by ACI, fib and Italian guidelines is appraised.

볼트 체결된 와이어 로프를 이용한 RC 보의 전단보강에 대한 연구

The paper describes m experimental study on the shear strengthening of concrete beams with exposed wire rope. The strengthening method is using the mechanical bolting of wire rope tensioned on the exterior of beam section. There are two shear strengthening types. The first is closed type wrapped beam section with wire rope like as closed stirrup. The second is U type tensioned at the anchor located in the side of beam section. The main parameters of specimens are strengthening spacings of wire rope with 150, 200, and 250mm for the closed and U type respectively. The shear span ratio of specimens applied by 3-point loading is 4. The results showed that the ultimate shear strength and ductility of strengthened beams increased significantly compared with non-strengthened beams. Especially, the strengthening effect of closed type was very preferable to U type. Therefore, the shear strengthening method with wire rope is very reasonable in view of repair and rehabilitation of beams.

Near surface mounted CFRP laminates for shear strengthening of concrete beams

A Near Surface Mounted (NSM) strengthening technique was developed to increase the shear resistance of concrete beams. The NSM technique is based on fixing, by epoxy adhesive , Carbon Fiber Reinforced Polymer (CFRP) laminates into pre-cut slits opened in the concrete cover of lateral surfaces of the beams. To assess the efficacy of this technique, an experimental program of four-point bending tests was carried out with reinforced concrete beams failing in shear. Each of the four tested series was composed of five beams: without any shear reinforcement; reinforced with steel stirrups; strengthened with strips of wet lay-up CFRP sheets, applied according to the externally bonded reinforcement (EBR) technique; and two beams strengthened with NSM precured laminates of CFRP, one of them with laminates positioned at 90° and the other with laminates positioned at 45° in relation to the beam axis. Influences of the laminate inclination, beam depth and longitudinal tensile steel reinforcement ratio on the efficacy of the strengthening techniques were analyzed. Amongst the CFRP strengthening techniques, the NSM with laminates at 45° was the most effective, not only in terms of increasing beam shear resistance but also in assuring larger deformation capacity at beam failure. The NSM was also faster and easier to apply than the EBR technique. The performance of the ACI and fib analytical formulations for the EBR shear strengthening was appraised. In general, the contribution of the CFRP systems predicted by the analytical formulations was slightly larger than the values registered experimentally. Performance of the formulation by Nanni et al. for NSM strengthening technique was also appraised. Using bond stress and CFRP effective strain values obtained in pullout bending tests with NSM CFRP laminate system, the formulation by Nanni et al. predicted a contribution of this CFRP system for the beam shear resistance of 72% the experimentally recorded values.

Theoretical Study of Strengthening for Increased Shear Bearing Capacity

In recent years, the use of carbon fiber reinforced polymer (CFRP) has been shown to be a competitive method for strengthening both the structural and economic performance of concrete. The method has been used for almost a decade, yet – most research undertaken has studied the flexural behavior of strengthened structures, while research on shear strengthening has been limited. The work presented in this paper focuses on CFRP shear strengthening of concrete beams. The theory presented addresses the limitations of the widely used truss model, and a refinement is suggested. A reduction factor to consider the nonuniform strain distribution over the cross section is proposed and strain limitations are prescribed for the principal strain in the concrete instead of the fiber strain, as in previous studies. The derived analytical model is compared to experimental data from tests. Fairly good agreement is found between results from tests and calculated values from theory with regard to both shear-bearing capacity and average fiber utilization.

Flexural and Shear Strengthening of Concrete Beams Using New Triaxially Braided Ductile Fabric

First Name is required invalid characters Last Name is required invalid characters Email Address is required Invalid Email Address Invalid Email Address