Set Of Unaligned Sequences Research Articles

OD-seq: outlier detection in multiple sequence alignments.

BackgroundMultiple sequence alignments (MSA) are widely used in sequence analysis for a variety of tasks. Outlier sequences can make downstream analyses unreliable or make the alignments less accurate while they are being constructed. This paper describes a simple method for automatically detecting outliers and accompanying software called OD-seq. It is based on finding sequences whose average distance to the rest of the sequences in a dataset, is anomalous.ResultsThe software can take a MSA, distance matrix or set of unaligned sequences as input. Outlier sequences are found by examining the average distance of each sequence to the rest. Anomalous average distances are then found using the interquartile range of the distribution of average distances or by bootstrapping them. The complexity of any analysis of a distance matrix is normally at least O(N 2) for N sequences. This is prohibitive for large N but is reduced here by using the mBed algorithm from Clustal Omega. This reduces the complexity to O(N log(N)) which makes even very large alignments easy to analyse on a single core. We tested the ability of OD-seq to detect outliers using artificial test cases of sequences from Pfam families, seeded with sequences from other Pfam families. Using a MSA as input, OD-seq is able to detect outliers with very high sensitivity and specificity.ConclusionOD-seq is a practical and simple method to detect outliers in MSAs. It can also detect outliers in sets of unaligned sequences, but with reduced accuracy. For medium sized alignments, of a few thousand sequences, it can detect outliers in a few seconds. Software available as http://www.bioinf.ucd.ie/download/od-seq.tar.gz.

Clustal omega.

Clustal Omega is a package for making multiple sequence alignments of amino acid or nucleotide sequences, quickly and accurately. It is a complete upgrade and rewrite of earlier Clustal programs. This unit describes how to run Clustal Omega interactively from a command line, although it can also be run online from several sites. The unit describes a basic protocol for taking a set of unaligned sequences and producing a full alignment. There are also protocols for using an external HMM or iteration to help improve an alignment.

FASTSP: linear time calculation of alignment accuracy

Multiple sequence alignment is a basic part of much biological research, including phylogeny estimation and protein structure and function prediction. Different alignments on the same set of unaligned sequences are often compared, sometimes in order to assess the accuracy of alignment methods or to infer a consensus alignment from a set of estimated alignments. Three of the standard techniques for comparing alignments, Developer, Modeler and Total Column (TC) scores can be derived through calculations of the set of homologies that the alignments share. However, the brute-force technique for calculating this set is quadratic in the input size. The remaining standard technique, Cline Shift Score, inherently requires quadratic time. In this article, we prove that each of these scores can be computed in linear time, and we present FastSP, a linear-time algorithm for calculating these scores. Even on the largest alignments we explored (one with 50 000 sequences), FastSP completed <2 min and used at most 2 GB of the main memory. The best alternative is qscore, a method whose empirical running time is approximately the same as FastSP when given sufficient memory (at least 8 GB), but whose asymptotic running time has never been theoretically established. In addition, for comparisons of large alignments under lower memory conditions (at most 4 GB of main memory), qscore uses substantial memory (up to 10 GB for the datasets we studied), took more time and failed to analyze the largest datasets. The open-source software and executables are available online at http://www.cs.utexas.edu/~phylo/software/fastsp/. tandy@cs.utexas.edu.

Genetic Algorithm Based Probabilistic Motif Discovery in Unaligned Biological Sequences

Finding motif in biosequences is the most important primitive operation in computational biology. There are many computational requirements for a motif discovery algorithm such as computer memory space requirement and computational complexity. To overcome the complexity of motif discovery, we propose an alternative solution integrating genetic algorithm and Fuzzy Art machine learning approaches for eliminating multiple sequence alignment process. Problem statement: More than a hundred methods had been proposed for motif discovery in recent years, representing a large variation with respect to both algorithmic approaches as well as the underlying models of regulatory regions. The aim of this study was to develop an alternative solution for motif discovery, which benefits from both data mining and genetic algorithm, and which at the same time eliminates the cost caused by use of multiple sequence alignment. Approach: Genetic algorithm based probabilistic Motif discovery model was designed to solve the problem. The proposed algorithm was implemented using Matlab and also tested with large DNA sequence data sets and synthetic data sets. Results: Results obtained by the proposed model to find the motif in terms of speed and length are compared with the existing method. Our proposed method finds Length of 11 in 18 sec and length of 15 in 24 sec but the existing methods finds length of 11 in 34 sec. Compare to other techniques the proposed one was outperforms the popular existing method. Conclusion: In this study, we proposed a model to discover motif in large set of unaligned sequences in considerably minimum time. Length of motif was also long. The proposed algorithm will be implemented using Matlab and was tested with large DNA sequence data sets and synthetic data sets.

Supervised Detection of Conserved Motifs in DNA Sequences with Cosmo

A number of computational methods have been proposed for identifying transcription factor binding sites from a set of unaligned sequences that are thought to share the motif in question. We here introduce an algorithm, called cosmo, that allows this search to be supervised by specifying a set of constraints that the position weight matrix of the unknown motif must satisfy. Such constraints may be formulated, for example, on the basis of prior knowledge about the structure of the transcription factor in question. The algorithm is based on the same two-component multinomial mixture model used by MEME, with stronger reliance, however, on the likelihood principle instead of more ad-hoc criteria like the E-value. The intensity parameter in the ZOOPS and TCM models, for instance, is estimated based on a profile-likelihood approach, and the width of the unknown motif is selected based on BIC. These changes allow cosmo to outperform MEME even in the absence of any constraints, as evidenced by 2- to 3-fold greater sensitivity in some simulation studies. Additional improvements in performance can be achieved by selecting the model type (OOPS, ZOOPS, or TCM) data-adaptively or by supplying correctly specified constraints, especially if the motif appears only as a weak signal in the data. The algorithm can data-adaptively choose between working in a given constrained model or in the completely unconstrained model, guarding against the risk of supplying mis-specified constraints. Simulation studies suggest that this approach can offer 3 to 3.5 times greater sensitivity than MEME. The algorithm has been implemented in the form of a stand-alone C program as well as a web application that can be accessed at http://cosmoweb.berkeley.edu. An R package is available through Bioconductor (http://bioconductor.org).

Identification of consensus RNA secondary structures using suffix arrays.

BackgroundThe identification of a consensus RNA motif often consists in finding a conserved secondary structure with minimum free energy in an ensemble of aligned sequences. However, an alignment is often difficult to obtain without prior structural information. Thus the need for tools to automate this process.ResultsWe present an algorithm called Seed to identify all the conserved RNA secondary structure motifs in a set of unaligned sequences. The search space is defined as the set of all the secondary structure motifs inducible from a seed sequence. A general-to-specific search allows finding all the motifs that are conserved. Suffix arrays are used to enumerate efficiently all the biological palindromes as well as for the matching of RNA secondary structure expressions.We assessed the ability of this approach to uncover known structures using four datasets. The enumeration of the motifs relies only on the secondary structure definition and conservation only, therefore allowing for the independent evaluation of scoring schemes. Twelve simple objective functions based on free energy were evaluated for their potential to discriminate native folds from the rest.ConclusionOur evaluation shows that 1) support and exclusion constraints are sufficient to make an exhaustive search of the secondary structure space feasible. 2) The search space induced from a seed sequence contains known motifs. 3) Simple objective functions, consisting of a combination of the free energy of matching sequences, can generally identify motifs with high positive predictive value and sensitivity to known motifs.

Tcoffee@igs: A web server for computing, evaluating and combining multiple sequence alignments.

This paper presents Tcoffee@igs, a new server provided to the community by Hewlet Packard computers and the Centre National de la Recherche Scientifique. This server is a web-based tool dedicated to the computation, the evaluation and the combination of multiple sequence alignments. It uses the latest version of the T-Coffee package. Given a set of unaligned sequences, the server returns an evaluated multiple sequence alignment and the associated phylogenetic tree. This server also makes it possible to evaluate the local reliability of an existing alignment and to combine several alternative multiple alignments into a single new one. Tcoffee@igs can be used for aligning protein, RNA or DNA sequences. Datasets of up to 100 sequences (2000 residues long) can be processed. The server and its documentation are available from: http://igs-server.cnrs-mrs.fr/Tcoffee/.

Algorithms for extracting structured motifs using a suffix tree with an application to promoter and regulatory site consensus identification.

This paper introduces two exact algorithms for extracting conserved structured motifs from a set of DNA sequences. Structured motifs may be described as an ordered collection of p > or = 1 "boxes" (each box corresponding to one part of the structured motif), p substitution rates (one for each box) and p - 1 intervals of distance (one for each pair of successive boxes in the collection). The contents of the boxes--that is, the motifs themselves--are unknown at the start of the algorithm. This is precisely what the algorithms are meant to find. A suffix tree is used for finding such motifs. The algorithms are efficient enough to be able to infer site consensi, such as, for instance, promoter sequences or regulatory sites, from a set of unaligned sequences corresponding to the noncoding regions upstream from all genes of a genome. In particular, both algorithms time complexity scales linearly with N2n where n is the average length of the sequences and N their number. An application to the identification of promoter and regulatory consensus sequences in bacterial genomes is shown.

Prediction of gene expression specificity by promoter sequence patterns.

We present here a heuristic method toward predicting the expression specificity in the transcriptional process, which is known to be regulated in large part by promoter sequences, by observing the appearance of conserved sequence patterns in a group of known promoters, such as for housekeeping or tissue-specific genes. Statistically conserved patterns were automatically extracted from a set of unaligned sequences up to 200 bp upstream of the transcription initiation site, by a standard procedure using the Markov chain and binomial distribution models. Furthermore, to obtain signal sequences of optimal lengths we devised a method that combines the multiple alignment and the analysis of the information content (or relative entropy). Groups of related promoters were compiled from the EPD eukaryotic promoter database and the EMBL nucleic acid sequence database. Each promoter was examined for its specificity by linear discriminant analysis to test the validity of the extracted patterns. Our method could correctly discriminate 77.6% of the housekeeping gene promoters and 62.9% of the liver promoters.

Hidden Markov models for sequence analysis: extension and analysis of the basic method.

Hidden Markov models (HMMs) are a highly effective means of modeling a family of unaligned sequences or a common motif within a set of unaligned sequences. The trained HMM can then be used for discrimination or multiple alignment. The basic mathematical description of an HMM and its expectation-maximization training procedure is relatively straightforward. In this paper, we review the mathematical extensions and heuristics that move the method from the theoretical to the practical. We then experimentally analyze the effectiveness of model regularization, dynamic model modification and optimization strategies. Finally it is demonstrated on the SH2 domain how a domain can be found from unaligned sequences using a special model type. The experimental work was completed with the aid of the Sequence Alignment and Modeling software suite.